SEARCH · Search NASA

Results for “data digitization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1984

TM digital image products for applications

The image characteristics of digital data generated by LANDSAT 4 thematic mapper (TM) are discussed. Digital data from the TM resides in tape files at various stages of image processing. Within each image data file, the image lines are blocked by a factor of either 5 for a computer compatible tape CCT-BT, or 4 for a CCT-AT and CCT-PT; in each format, the image file has a different format. Nominal geometric corrections which provide proper geodetic relationships between different parts of the image are available only for the CCT-PT. It is concluded that detector 3 of band 5 on the TM does not respond; this channel of data needs replacement. The empty bin phenomenon in CCT-AT images results from integer truncations of mixed-mode arithmetric operations.

Barker, J. L.↗

NASA NTRS1984

Experiment description

The Shuttle Imaging Radar-B (SIR-B) and its subsystems are described. The antenna and the radar sensor are subsystems carried over from SIR-A to SIR-B with some modifications. The optical recorder (OR) is unchanged from that used in SIR-A. Important new elements in SIR-B are antenna electronics that allow selectable look angles, a digital data handling subsystem (DDHS), increased bandwidth, a calibrator, and a digital data processor on the ground. A list of the SIR-B characteristics is given. Radio-frequency (RF) pulses at 1.28 GHz (L-band) are generated in the transmitter portion of the sensor and radiated by the antenna. The RF signals are reflected from the Earth, collected by the antenna, and sent to the receiver portion of the sensor where they are beaten down to baseband to form the offset video output. This output is then sent to either the CR, the DDHS, or both. An end to end system block diagram is given.

Source record↗

NASA NTRS2009

Software Configurable Multichannel Transceiver

Emerging test instrumentation and test scenarios increasingly require network communication to manage complexity. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. A fundamental requirement for a software-definable radio system is independence from carrier frequencies, one of the radio components that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate the viability of a promising chipset that performs conversion of radio frequency (RF) signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit the size of a commodity disk drive, programmable for any frequency band between 1 MHz and 6 GHz.

Freudinger, Lawrence C.↗

NASA NTRS1989

A data acquisition and storage system for the ion auxiliary propulsion system cyclic thruster test

A nine-track tape drive interfaced to a standard personal computer was used to transport data from a remote test site to the NASA Lewis mainframe computer for analysis. The Cyclic Ground Test of the Ion Auxiliary Propulsion System (IAPS), which successfully achieved its goal of 2557 cycles and 7057 hr of thrusting beam on time generated several megabytes of test data over many months of continuous testing. A flight-like controller and power supply were used to control the thruster and acquire data. Thruster data was converted to RS232 format and transmitted to a personal computer, which stored the raw digital data on the nine-track tape. The tape format was such that with minor modifications, mainframe flight data analysis software could be used to analyze the Cyclic Ground Test data. The personal computer also converted the digital data to engineering units and displayed real time thruster parameters. Hardcopy data was printed at a rate dependent on thruster operating conditions. The tape drive provided a convenient means to transport the data to the mainframe for analysis, and avoided a development effort for new data analysis software for the Cyclic test. This paper describes the data system, interfacing and software requirements.

Hamley, John A.↗

NASA NTRS1975

LANDSAT data for state planning

The results of an effort to generate and apply automated classification of LANDSAT digital data to state of Georgia problems are presented. This phase centers on an analysis of the usefulness of LANDSAT digital data to provide land-use data for transportation planning. Hall County, Georgia was chosen as a test site because it is part of a seventeen county area for which the Georgia Department of Transportation is currently designing a Transportation Planning Land-Use Simulation Model. The land-cover information derived from this study was compared to several other existing sources of land-use data for Hall County and input into this simulation. The results indicate that there is difficulty comparing LANDSAT derived land-cover information with previous land-use information since the LANDSAT data are acquired on an acre by acre grid basis while all previous land-use surveys for Hall County used land-use data on a parcel basis.

Faust, N. L.↗

NASA NTRS1982

Agricultural land cover mapping in the context of a geographically referenced digital information system

The introduction of soil map information to the land cover mapping process can improve discrimination of land cover types and reduce confusion among crop types that may be caused by soil-specific management practices and background reflectance characteristics. Multiple dates of LANDSAT MSS digital were analyzed for three study areas in northern Missouri to produce cover types for major agricultural land cover classes. Digital data bases were then developed by adding ancillary data such as digitized soil and transportation network information to the LANDSAT-derived cover type map. Procedures were developed to manipulate the data base parameters to extract information applicable to user requirements. An agricultural information system combining such data can be used to determine the productive capacity of land to grow crops, fertilizer needs, chemical weed control rates, irrigation suitability, and trafficability of soil for planting.

Stoner, E. R.↗

NASA NTRS1983

Cloud fraction and cloud size distributions derived using Landsat Multispectral Scanner data

Initial results are presented on the spatial structure of cumulus cloud fields derived using Landsat digital data. Techniques to determine clear, overcast, and cloud edge pixels are discussed and used to analyze four Landsat scenes. Cloud number densities, cloud cover, cloud aspect ratio, and the ratio of interior to cloud edge pixels are obtained for the four scenes and are discussed. This new application of Landsat digital data should prove useful in developing and testing models of the radiative and dynamical properties of cumulus cloud fields on GCM spatial scales.

Wielicki, B. A.↗

NASA NTRS1974

Applications of ERTS data to coastal wetland ecology with special reference to plant community mapping and typing and impact of man

Complete seasonal ERTS-1 coverage of Atlantic coastal wetlands from Delaware Bay to Georgia provides a basis for assessment of temporal data for wetland mapping, evaluation, and monitoring. Both MSS imagery and digital data have proved useful for gross wetland species delineation and determination of the upper wetland boundary. Tidal effects and (band to band or seasonal) spectral reflectance differences make it possible to type vegetatively coastal wetlands in salinity related categories. Management areas, spoil disposal sites, drainage ditches, lagoon-type developments and highway construction can be detected indicating a monitoring potential for the future. A northern test site (Maryland-Virginia) and a southern test site (Georgia-South Carolina), representing a range of coastal marshes from saline to fresh, were chosen for intensive study. Wetland maps were produced at various scales using both ERTS imagery (bands 5 and 7) and digital data (bands 4, 5 and 7).

Anderson, R. R.↗

NASA NTRS1993

Modem Handles Data At 160 Mb/s

Trellis-coded octal-phase-shift-keying modem transmits and receives continuous or bursted digital data for satellite applications. Helps satisfy increasing demands for communication of high-speed digital data from sources like high-performance computers and high-definition television transmitters, as well as multiplexed signals from slower signal sources. Increases maximum effective bit rate accommodated in standard 72-MHz-wide commercial satellite-transponder radio channel from 120 Mb/s to 160 Mb/s. Principal advantages: spectral efficiency and power efficiency.

Budinger, James M.↗

NASA NTRS1996

Calibration of the Airborne Visible/Infrared Imaging Spectrometer in the Laboratory

Imaging spectrometry data must be spectrally, radiometrically and geometrically calibrated in order to: 1) derive physical parameters from measured spectral radiance, 2) compare data acquired from different regions and at different times, 3) compare and analyze the imaging spectrometry data with data acquired from other calibrated sensors, and 4) compare and analyze data with results from computer models. The calibration of AVIRIS data is the process by which laboratory characterization data are applied to raw instrument data (digitized number versus spectral channels) to produce quantitative spectra (radiance versus wavelength) for each image pixel in units of spectral radiance. The AVIRIS sensor and calibration process are described by Vane and the application of the calibration data to the raw digital data is described by Green. This calibration process is validated for in-flight performance of the sensor using a rigorous ground-truth campaign. This workshop paper reviews the laboratory characterization data set that is used in the AVIRIS calibration process. The laboratory measurements used to acquire the calibration data are divided into three classes: 1) spectral calibration, 2) radiometric calibration, and 3) spatial calibration.

Green Robert O.↗

NASA NTRS1974

Evaluation of satellite remote sensing and automatic data techniques for characterization of wetlands and coastal marshlands

The author has identified the following significant results. ERTS digital data has been used to detect and measure accretion in the large estuarial system of the Atchafalaya River in southern Louisiana. Comparisons of aerial photography taken in October 1970 with a computer printout of ERTS digital data collected on October 1, 1972, show that in a delineated area of 1400 hectares (3460 acres) an accretion of land area in the amount of 112 hectares (277 acres) had occurred. Analysis of band 3 of the ERTS MSS was used to make a land-water map of the area. The accretion test area was marked on this map and the percentage of elements indicated as land was calculated. This percentage was then multiplied by the total test area to obtain the area of land on the date of the ERTS observation for comparison with the aerial photography. Significant improvement in classification accuracy of ERTS MSS data has been achieved by use of a priori probabilities of occurrence in pattern recognition programs. Two classifications were made with accuracies of 76.0% and 81.5%, respectively.

Cartmill, R. H.↗

NASA NTRS1984

Digital data-acquisition system for measuring the free decay of acoustical standing waves in a resonant tube

A low-cost digital system based on an 8-bit Apple II microcomputer has been designed to provide on-line control, data acquisition, and evaluation of sound absorption measurements in gases. The measurements are conducted in a resonant tube, in which an acoustical standing wave is excited, the excitation removed, and the sound absorption evaluated from the free decay envelope. The free decay is initiated from the computer keyboard after the standing wave is established, and the microphone response signal is the source of the analog signal for the A/D converter. The acquisition software is written in ASSEMBLY language and the evaluation software in BASIC. This paper describes the acoustical measurement, hardware, software, and system performance and presents measurements of sound absorption in air as an example.

Meredith, R. W.↗

NASA NTRS1978

Application of LANDSAT data and digital image processing

The author has identified the following significant results. Based on LANDSAT 1 and 2 data, applications in the fields of coal mining, lignite exploration, and thematic mapping in geology are demonstrated. The hybrid image processing system, its software, and its utilization for educational purposes is described. A pre-operational European satellite is proposed.

Bodechtel, J.↗

NASA NTRS1973

Unsupervised spatial clustering with spectral discrimination

The development of a computer program is reported for extracting features from remotely sensed data presented in digital image form. This computer program requires no human supervision or prejudgment and operates unassisted on the raw digital data. A condensed general background is included on remote sensing of earth features and a short synopsis on some of the most commonly used types of feature extraction techniques. Results obtained from the unsupervised feature extraction computer program along with a description and listing of the computer program are presented.

Jayroe, R. R., Jr.↗

NASA NTRS1973

A portable millisecond-integration-time photoelectric photometer.

Portable equipment for recording millisecond-integration-time photoelectric photometric data is described. Digital data are reliably recorded on standard 6.35 mm audio grade magnetic tape via a quadradial audio grade tape deck. The system is designed specifically for recording lunar occulations of stars, but the data recording technique is independent of the data source. Recovery of the data is made via minicomputer.

Mcgraw, J. T.↗

NASA NTRS1974

Application of ultrasonic signature analysis for fatigue detection in complex structures

Ultrasonic signature analysis shows promise of being a singularly well-suited method for detecting fatigue in structures as complex as aircraft. The method employs instrumentation centered about a Fourier analyzer system, which features analog-to-digital conversion, digital data processing, and digital display of cross-correlation functions and cross-spectra. These features are essential to the analysis of ultrasonic signatures according to the procedure described here. In order to establish the feasibility of the method, the initial experiments were confined to simple plates with simulated and fatigue-induced defects respectively. In the first test the signature proved sensitive to the size of a small hole drilled into the plate. In the second test, performed on a series of fatigue-loaded plates, the signature proved capable of indicating both the initial appearance and subsequent growth of a fatigue crack. In view of these encouraging results it is concluded that the method has reached a sufficiently advanced stage of development to warrant application to small-scale structures or even actual aircraft.

Zuckerwar, A. J.↗

NASA NTRS1974

Skylab Medical Data Center and Archives

The founding of the Skylab medical data center and archives as a central area to house medical data from space flights is described. Skylab program strip charts, various daily reports and summaries, experiment reports and logs, status report on Skylab data quality, raw data digital tapes, processed data microfilm, and other Skylab documents are housed in the data center. In addition, this memorandum describes how the data center acted as a central point for the coordination of preflight and postflight baseline data and how it served as coordinator for all data processing through computation and analysis. Also described is a catalog identifying Skylab medical experiments and all related data currently archived in the data center.

Spross, F. R.↗

NASA NTRS1976

Forest land management by satellite: LANDSAT-derived information as input to a forest inventory system

The author has identified the following significant results. Analysis of LANDSAT temporal data, specifically the digitally merged winter and summer scenes, provided the best overall classification results. Comparison of temporal classification results with available ground truth reveal a 94% agreement in the delineation of hardwood categories, a 96% agreement for the combined pine category, and a greater than 50% agreement for each individual pine subcategory. For nearly 1000 acres, compared clearcut acreage estimated with LANDSAT digital data differed from company inventory records by only 3%. Through analysis of summer data, pine stands were successfully classified into subcategories based upon the extent of crown closure. Maximum spectral separability of hardwood and pine stands was obtained from the analysis of winter data.

Williams, D. L.↗