Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Superconducting Density of States of PtPb 4

PtPb 4 is a type II superconductor with a bulk critical temperature T c ≈ 3 K and an upper critical field of H c2 = 0.36 T. PtPb 4 is related to non-superconducting PtSn 4 , which presents nodal arc states at the surface. Here, we measure the superconducting density of states of PtPb 4 using millikelvin Scanning Tunneling Microscopy (STM). We observe a fully opened superconducting gap of Δ = 0.48 meV similar to expectations from Bardeen, Cooper and Schrieffer (BCS) theory (Δ 0 = 1.76k B T c = 0.49 meV). Measurements under magnetic fields applied perpendicular to the surface show a spatially inhomogeneous gap structure, presenting superconducting signatures at fields as high as 1.5 T, significantly above H c2 = 0.36 T. On some locations, we find that the superconducting density of states does not vanish above T c . We can find signatures of a superconducting gap up to 5 K. We discuss possible reasons for the observation of superconducting properties above T c and H c2 , emphasizing the role played by structural defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy

The deformation and failure mechanisms of Al-9Cu-6Ce (wt%) based alloys fabricated with laser powder bed fusion were investigated from room temperature to 400°C. The yield and ultimate tensile strengths decreased monotonically with increase in temperature, but the tensile elongation dipped unexpectedly at elevated temperatures and exhibited a minimum at 300°C. The dip in tensile elongation occurred with a concomitant dip in strain-rate sensitivity (SRS) of deformation. The as-fabricated alloy microstructure was heterogeneous, and the heat affected zone (HAZ) underneath the melt pool boundary was prone to strain localization. At 300 °C, the reduced SRS promoted the progression of strain localization in the HAZ leading to failure initiation and the dip in tensile elongation. Furthermore, a higher SRS or strain-hardening rate at other temperatures improved the tensile elongation by slowing the progression of strain localization in the HAZ such that failure initiated by other mechanisms elsewhere in the microstructure. Notably, the tensile elongation was limited by the defect structure only in a narrow temperature range (150 - 200 °C) while at other temperatures it was limited by the inherent microstructural features. This investigation exemplifies unexpected deformation and failure mechanisms possible in heterogeneous microstructures that result from additive manufacturing.

36 MATERIALS SCIENCE↗

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging

Laser powder bed fusion (LPBF) is an emerging metal additive manufacturing process. The gas-driven powder motions in laser powder bed fusion have significant influence on the build quality. However, the transient powder-gas interaction has not been well understood due to the challenges in quantitative experiment measurements. In this work, the powder-gas interaction for a single pulse laser illuminating on the powder bed is studied. We establish a multi-physics model to simulate the complex liquid/gas flow as well as the gas-driven powder motions, which is substantiated by high-speed synchrotron x-ray imaging. We identify and quantify four characteristic modes of powder-gas interaction in LPBF. The motion of a powder is controlled by one or multiple interaction modes collectively. As revealed by simulations and confirmed by experiments, powders can merge into the molten pool from its rim, be ejected at different divergence angles (powder spattering), or dive into the molten pool to cause significant molten pool fluctuation. Overall, our results provide insights toward the driving forces controlling the dynamic powder behavior, which pave the way for reducing structure defects during the build process.

36 MATERIALS SCIENCE↗

Direct non-oxidative methane coupling on vitreous silica supported iron catalysts

Direct non-oxidative methane coupling (NMC) is one of the promising pathways for methane upgrading into value-added olefin and aromatic hydrocarbons. The silica-supported iron (i.e., Fe/SiO 2 ) catalyst has been reported effective for NMC, but the effects of silica support on the catalyst property and NMC performance have rarely been explored. Here, in this work, we prepared a vitreous silica-supported iron (Fe/SiO 2 -V) catalyst by flame fusion of a mixture of quartz silica and fayalite. The physicochemical properties and NMC performance of the as-prepared catalysts were measured. Compared to crystalline cristobalite support in Fe/SiO 2 catalyst that has been studied previously, vitreous silica support has disordered Si-O bonds and structural defects, enabling better iron dispersion and more vital metal-support interaction. The as-prepared Fe/SiO 2 -V catalyst had a shorter induction period in methane activation and lower coke yield in NMC. The increase in iron concentration in Fe/SiO 2 -V catalysts elongated the catalyst induction period and promoted aromatics and coke formation. The coke type of the spent Fe/SiO 2 -V catalyst is more uniform than the cristobalite-supported iron catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Achieving high rate performance in hybrid pristine-recycled cathodes using model-informed electrode designs

Direct recycling lithium-ion battery cathodes, a process that retains the engineered oxide structures from end-of-life materials, presents a cost-effective and energy-efficient alternative to other battery recycling methods. However, while direct-recycled cathodes have demonstrated performance comparable to that of pristine materials at low cycling rates, their high-rate performance remains uncertain. Morphology changes in cathode particles, a main mode of degradation, directly impact rate performance by limiting surface kinetics and solid-phase diffusion. If direct recycling processes do not sufficiently restore pristine-like morphologies, the recycled materials may retain structural defects that hinder high-rate performance. The present work uses a physics-based pseudo-2D model to simulate hybrid electrodes with pristine and artificially “aged/recycled” NMC materials to investigate potential impacts of incorporating performance-limited aged cathode materials into cells. The study highlights how differences in transport and kinetic properties can influence rate capabilities in mixed electrodes — particularly in high-loading cells in high-demand applications. However, model results also reveal a possible mitigation strategy via dual-layer electrode architectures with lower-performing materials positioned near the current collector. Simulations of 4.0 mAh cm −2 cells cycled at 4C using a dual-layer architecture provided approximately 5%–30% more capacity in constant-current protocols compared to homogeneously blended electrode architectures with the same loadings and mixed-material compositions. These findings highlight the importance of strategic electrode design in minimizing potential performance losses and facilitating the integration of recycled materials into high-performance batteries, advancing sustainable and cost-effective battery manufacturing.

25 ENERGY STORAGE↗

Nonlinear modeling and performance analysis of cracked beam microgyroscopes

Cracks constitute a common structural defect in microelectromechanical systems that may arise during manufacturing, mechanical fatigue, or shock loading. Areas weakened by cracks increase the flexibility of the microstructure. Furthermore, depending on the crack severity, the increased flexibility can cause dramatic changes in the static and dynamic behaviors of electrically actuated MEMS. In this study, a numerical investigation of the depth and location of multiple edge cracks on the performance of beam microgyroscopes is conducted. Applying the Griffith strain energy release theorem for an edge crack, the vibrational characteristics of microgyroscopes with multiple cracks including the static deflection, natural frequencies, and mode shapes are studied analytically. Then, the differential quadrature method is employed to model the nonlinear dynamic behaviors of the cracked gyroscope system. Cracks initiated along the driving or sensing directions of the microgyroscope are found to have differing effects on its nonlinear dynamic response. This numerical study reveals that the onset of severe single cracks or a series of multiple cracks can significantly affect the sensitivity of the microgyroscope to base rotations and therefore leads to a degradation in the performance of the damaged MEMS sensor. This study also shows that a potential design approach for broadband microgyroscope systems manufactured with cracks can be proposed.

42 ENGINEERING↗

Processing of tungsten through electron beam melting

Additive manufacturing (AM) presents a new design paradigm for the manufacture of engineering materials through the layer-by-layer approach combined with welding theory. In the instance of difficult to process materials such as tungsten and other refractory metals, AM offers an opportunity for radical redesign of critical components for next-generation energy technologies including fusion. In this work, electron beam powder bed fusion (EB-PBF) is applied to process pure tungsten to study the influence of process parameters on the defect density of the material. Here, an in-situ image analysis algorithm is applied to pure tungsten for the first time, and is used to visualize the defect structure in AM tungsten. Finally, a cracking mechanism for AM tungsten is proposed, and suggestions for suppression of cracks in pure tungsten are offered.

36 MATERIALS SCIENCE↗

Microstructural changes of proton irradiated Hastelloy-N and in situ micropillar compression testing of one single grain at different local damage levels

Here, in situ micropillar compression was used to study the deformation of proton-irradiated Hastelloy-N at different damage levels. Multiple pillars were prepared from a single domain along the cross-section of 2.5 MeV proton-irradiated Hastelloy-N. Depending on the location of micropillars, the critical resolved shear stress was obtained as a function of local damage levels. Such an approach eliminates the variation of yield stress due to the difference in the Schmid factor. Microstructural characterization showed that irradiation hardening is contributed by complicated defect structures, including (a) dislocation loops with many in corduroy-like alignments, (2) dislocations pile up, and (3) Cottrell atmosphere. Silicon atoms are found to segregate at dislocation lines and loops and form complicated Cottrell cloud patterns. The critical resolved shear stress, $t_{crss}$, and hardening exponents were both extracted as a function of displacements per atom values up to 2.3. There was a 60% increase in $t_{crss}$ at the highest damage level.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Early self-organization of fission gas bubble superlattice formation in neutron-irradiated monolithic U-10Mo fuels

Self-organization of defect superlattices in far-from-equilibrium systems presents a promising way to mitigate swelling concerns in nuclear materials. The gas bubble superlattice (GBS) is a highly ordered, three-dimensional complex defect structure that can retain fission gasses in Uranium-Molybdenum (U-Mo) fuels. Transmission electron microscopy (TEM) investigation of monolithic U-10Mo fuel irradiated to 1.15 × 10 21 fissions/cm 3 and 1.30 × 10 21 fissions/cm 3 revealed that early-stage ordering preferentially occurs at the grain boundaries (GB) and that the critical bubble size for complete ordering is ~3 nm. Once formed at the GB, the GBS extends towards the grain interior; however, the spread in distance from the GB varies likely depending on the type and strength of the GB sink. TEM results also showed a possible correlation between the growth and evolution of the intragranular disordered bubbles and large dislocation networks. The fission product distribution in and outside of the GBS was also investigated confirming the presence of xenon in the GBS, as well as other fission products including cesium, barium, lanthanum, and cerium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The role of UC inclusions in the development of fission gas bubble superlattice neutron-irradiated monolithic U-10Mo fuels

Uranium Carbide (UC) inclusions are the most prevalent impurities in Uranium-Molybdenum (U-Mo) fuel and are considered undesirable because they could potentially affect fuel performance. This work revealed that, like grain boundaries (gBs), UC inclusions could help facilitate the formation of the fission gas bubble superlattice (GBS). The GBS is a highly organized complex defect structure that can effectively store fission gases, thereby inhibiting fuel swelling. Transmission electron microscopy (TEM) showed that GBS self-organization can initiate at the UC/U-Mo interfaces in U-10Mo fuel irradiated to low fission density. Furthermore, this study also revealed that the UC boundary in U-10Mo irradiated to low fission density is wavy and periodic in morphology and that GBS formation is semi-coherent with the UC boundary. Because the initiation of GBS occurs at gBs and UC/U-Mo interfaces, the fission gas inventory is always highest at those regions compared to the U-Mo grain interior. Consequently, at higher fission densities, it is likely that high burnup structure (HBS) development via grain refinement will begin at gBs and UC/U-Mo interfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Origin of enhanced performance when Mn-rich rocksalt cathodes transform to δ -DRX

Most Mn-rich cathodes are known to undergo phase transformation into structures resembling spinel-like ordering upon electrochemical cycling. Recently, the irreversible transformation of Ti-containing Mn-rich disordered rock-salt cathodes into a phase — named δ — with nanoscale spinel-like domains has been shown to increase energy density, capacity retention, and rate capability. However, the nature of the boundaries between domains and their relationship with composition and electrochemistry are not well understood. In this work, we discuss how the transformation into the multi-domain structure results in eight variants of Spinel domains, which is crucial for explaining the nanoscale domain formation in the δ -phase. We study the energetics of crystallographically unique boundaries and the possibility of Li-percolation across them with a fine-tuned CHGNet machine learning interatomic potential. Energetics of 16 d vacancies reveal a strong affinity to segregate to the boundaries, thereby opening Li-pathways at the boundary to enhance long-range Li-percolation in the δ structure. Defect calculations of the relatively low-mobility Ti show how it can influence the extent of Spinel ordering, domain morphology and size significantly; leading to guidelines for engineering electrochemical performance through changes in composition.

Anand, Shashwat↗

Strain-relaxed tetragonal MAPbI 3 results in efficient mesoporous solar cells

In mesoporous organo-halide perovskite solar cells, the coexistence of tetragonal phase and cubic phase in the perovskite layer is found to result in strained crystal structure at the mesoporous TiO 2 (mp-TiO 2 )/perovskite heterointerface. This results in structural defects pinholes, grain boundaries, and interfacial porosity which is detrimental towards photovoltaic performance and device stability. The strain at the interface originates from the lattice mismatch between the mp-TiO 2 nanoparticles (NPs) and perovskite. Here, a transformative approach is demonstrated to realize relaxed and high purity tetragonal phase MAPbI 3 (RP) near the mp-TiO 2 interface region. This approach involves inserting a ~2 nm lattice matched buffer layer of cubic CsPbBr 3 between mp-TiO 2 NPs and MAPbI 3 , which serves as a template for epitaxial growth for top MAPbI 3 . As a result, the solar cell with relaxed MAPbI3 shows a power conversion efficiency (PCE) of 22.12% with significantly enhanced environmental, light, and thermal stability.

14 SOLAR ENERGY↗

High-coercivity ThMn 12 -type monocrystalline Sm–Zr–Fe–Co–Ti particles by high-temperature reduction diffusion

The ThMn 12 -type (Sm,Zr)1(Fe,Co,Ti) 12 compounds have the potential of powerful permanent magnets. Magnetically hard and anisotropic powders of such compound have been prepared by subjecting elemental oxides and Co mixed with Ca and CaO dispersant to a succession of high-energy ball-milling, reduction diffusion at 990–1220 °C and repeated washing. The size of the resulting ThMn 12 -type crystallites, their coercivity and fraction of monocrystalline particles were all found to increase with the reduction-diffusion temperature. Particles synthesized at 1220 °C were highly monocrystalline with a mean size of 0.54 μm and, after a magnetic-field alignment, exhibited a coercivity of 1.26 T and a full-density-projected maximum energy product of at least 209 kJ/m 3 (26.3 MGOe). Here, the strong positive effect of the reduction-diffusion temperature on the coercivity has been attributed to separation of the crystallites and to decrease in the incidence of structural defects.

36 MATERIALS SCIENCE↗

CDB-AP: An application for coincidence Doppler broadening spectroscopy analysis

Coincidence Doppler Broadening (CDB) Positron Annihilation Spectroscopy (PAS) is a material analysis technique that can be used to non-destructively measure characteristics of structural defects in samples. Analyzing and comparing large datasets obtained using this technique, however, can be complicated and time intensive. The Coincidence Doppler Broadening Analysis Program (CDB-AP) is a graphical user interface that facilitates rapid analysis of many data files while using transparent processes. It is already used in three laboratories at Idaho National Laboratory and can be used in laboratories worldwide.

36 MATERIALS SCIENCE↗

Intrinsic mechanical properties and seeding effect of tobermorite synthesized in supercritical water

This publication reports for the first time the physiochemical, the intrinsic mechanical properties and the seed effect of anomalous Al-substituted 11 Å tobermorite synthesized via the innovative supercritical hydrothermal flow process at 400 °C and 25 MPa. This approach allows synthesizing highly crystalline tobermorite fibers in only 8 s, with characteristics very close to the natural tobermorite. The anomalous 11 Å tobermorite exhibits aluminosilicate chains with a high polymerisation degree and a less defective structure compared to materials produced via the conventional hydrothermal method. Furthermore, the intrinsic mechanical properties of Al-tobermorite synthesized in supercritical water are investigated for the first time by High-Pressure XRD. This Al-substituted 11 Å tobermorite is characterised by higher incompressibility along the b-axis and bulk modulus K0 in comparison with what is commonly observed for other synthetic tobermorite. The tobermorite acts as nucleation points to trigger the quick formation of the hydration product in Portland cement paste.

Calcium silicate hydrate↗

Exploring Ca–Ce–M–O (M = 3d Transition Metal) Oxide Perovskites for Solar Thermochemical Applications

Solar thermochemical (STC) processes hold promise as efficient ways to generate renewable fuels, fuel precursors, or chemical feedstocks using concentrated sunlight. Specifically, one actively researched approach is the two-step STC cycle, which uses a redox-active, off-stoichiometric, transition-metal oxide material to split water and/or CO 2 , generating H 2 and/or CO, respectively, or syngas (a combination of H 2 and CO). Identifying novel metal oxides that yield larger reduction extents (practically achievable off-stoichiometries) than the state-of-the-art CeO 2 is critical. Here, we explore the chemical space of Ca–Ce–M–O (M = 3d transition metal, except Cu and Zn) metal oxide perovskites, with Ca and/or Ce occupying the A site and M occupying the B site within an ABO 3 framework, as potential STC candidates. We use density functional theory (DFT)-based calculations and systematically evaluate the oxygen vacancy (VaO) formation energy (≈ enthalpy of reduction in an STC cycle), electronic properties, thermodynamic stability of CaMO 3 , CeMO 3 , and Ca 0.5 Ce 0.5 MO 3 perovskites, and the VaO formation energy within Ca 0.5 Ce 0.5 Ti 0.5 Mg 0.5 O 3 perovskite. We consider only Ca and/or Ce on the A site because of their similar size and the potential redox activity of Ce 4+ . If both Ce and M exhibit simultaneous reduction with Va O formation, the resulting perovskite could exhibit a larger entropy of reduction than a single cation reduction. The increased entropy produces increased reduction for fixed temperature, partial pressure of oxygen, and reduction enthalpy, and therefore increased STC efficiency. Importantly, we identify Ca 0.5 Ce 0.5 MnO 3 , Ca 0.5 Ce 0.5 FeO 3 , and Ca 0.5 Ce 0.5 VO 3 to be promising candidates based on their Va O formation energy and thermodynamic (meta)stability. Moreover, based on our calculated on-site magnetic moments, electron density of states, and electron density differences between pristine and defective structures, we find Ca 0.5 Ce 0.5 MnO 3 to exhibit simultaneous reduction of both Ce 4+ (A-site) and Mn 3+ (B-site), highlighting a particularly promising candidate for STC applications with a predicted higher entropy of reduction than CeO 2 . Lastly, we extract metrics that govern the trends in Va O formation energies, such as standard reduction potentials, and provide pointers for further experimental and theoretical studies, which will enable the design of improved materials for the STC cycle.

14 SOLAR ENERGY↗

PbI 2 Nanocrystal Growth by Atomic Layer Deposition from Pb(tmhd) 2 and HI

Atomic layer deposition (ALD) allows for fine control over the thickness, stoichiometry, and structural defects of materials. ALD provides a suitable route to deposit lead halides, which can further be converted to perovskites for photovoltaics, photoemission, and photodetection, among other applications. Deposition of lead halides by ALD has already begun to be explored; however, the precursors used in published processes are highly hazardous, require expensive fabrication processes, or contain impurities that can jeopardize the optoelectronic properties of metal halide perovskites after conversion. In this work, we deposited lead iodide (PbI 2 ) by a facile ALD process involving only two readily accessible and low-cost precursors. PbI 2 nanocrystals were grown on soda-lime glass (SLG), silicon dioxide support grids, and silicon wafer substrates and provided the groundwork for further investigation into developing lead halide perovskite processes by ALD. Further, the ALD-grown PbI 2 was characterized by annular dark-field scanning transmission electron microscopy (ADF-STEM), atomic force microscopy (AFM), high resolution transmission electron microscopy (HRTEM), X-ray fluorescence (XRF), and X-ray photoemission spectroscopy (XPS), among other methods. This work presents the first step to synthesize lead halide perovskites with atomic control for applications such as interfacial layers in photovoltaics and for deposition in microcavities for lasing.

36 MATERIALS SCIENCE↗

Molecular Dynamics Simulations of Calcite Fracture in Water

Calcite (CaCO 3 ) is one of the most common minerals in geologic and engineered systems. It is often in contact with aqueous solutions, causing chemically assisted fracture that is critical to understanding the stability of subsurface systems and manmade structures. Calcite fracture was evaluated with reactive molecular dynamics simulations, including the impacts of crack tip geometry (notch), the presence of water, and surface hydroxyl groups. Chemo-mechanical weakening was assessed by comparing the loads where fracture began to propagate. Our analyses show that in the presence of a notch, the load at which crack growth begins is lower, compared to the effect of water or surface hydroxyls. Additionally, the breaking of two adjacent Ca–O bonds is the kinetic limitation for crack initiation, since transiently broken bonds can reform, not resulting in crack growth. In aqueous environments, fresh (not hydroxylated) calcite surfaces exhibited water strengthening. Manual addition of H + and/or OH – species on the (104) calcite surface resulted in chemo-mechanical weakening of calcite by 9%. Achieving full hydroxylation of the calcite surface was thermodynamically and kinetically limited, with only 0.17–0.01 OH/nm 2 surface hydroxylation observed on the (104) surface at the end of the simulations. In conclusion, the limited reactivity of pure water with the calcite surface restricts the chemo-mechanical effects and suggests that reactions between physiosorbed water and localized structural defects may be dominating the chemo-mechanical process in the studies where water weakening has been reported.

Calcite↗