Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Investigation of SmBaCuCoO{sub 5+{delta}} double-perovskite as cathode for proton-conducting solid oxide fuel cells

SmBaCuCoO{sub 5+{delta}}, a double-perovskite oxide, was synthesized by the modified Pechini method and developed as cathode material for proton-conducting solid oxide fuel cells. The SmBaCuCoO{sub 5+{delta}} powders calcined at 800 {sup o}C, show the double-perovskite structure in powder XRD pattern. SmBaCuCoO{sub 5+{delta}} has a more suitable thermal expansion coefficient than SmBaCo{sub 2}O{sub 5+{delta}} for BaCe{sub 0.7}Zr{sub 0.1}Y{sub 0.2}O{sub 3-{delta}} electrolyte-based solid oxide fuel cells. The single cell was tested with humidified hydrogen ({approx}3% H{sub 2}O) as the fuel and static air as the oxidant. The performance of the cell was characterized by DC Electronic Load and AC impedance spectroscopy. The peak power densities reached 355-86 mW cm{sup -2} in the range of 700-550 {sup o}C and the interfacial polarization resistance decreased with increasing operation temperature, from 3.1 {Omega} cm{sup 2} at 550 {sup o}C to 0.22 {Omega} cm{sup 2} at 700 {sup o}C. The high power density and low polarization demonstrate that SmBaCuCoO{sub 5+{delta}} is a potential candidate for proton-conducting solid oxide fuel cells.

36 MATERIALS SCIENCE↗

Sonic-box method employing local Mach number for oscillating wings with thickness

A computer program was developed to account approximately for the effects of finite wing thickness in the transonic potential flow over an oscillating wing of finite span. The program is based on the original sonic-box program for planar wing which was previously extended to include the effects of the swept trailing edge and the thickness of the wing. Account for the nonuniform flow caused by finite thickness is made by application of the local linearization concept. The thickness effect, expressed in terms of the local Mach number, is included in the basic solution to replace the coordinate transformation method used in the earlier work. Calculations were made for a delta wing and a rectangular wing performing plunge and pitch oscillations, and the results were compared with those obtained from other methods. An input quide and a complete listing of the computer code are presented.

Ruo, S. Y.↗

A vortex-filament and core model for wings with edge vortex separation

A method for predicting aerodynamic characteristics of slender wings with edge vortex separation was developed. Semiempirical but simple methods were used to determine the initial positions of the free sheet and vortex core. Comparison with available data indicates that: the present method is generally accurate in predicting the lift and induced drag coefficients but the predicted pitching moment is too positive; the spanwise lifting pressure distributions estimated by the one vortex core solution of the present method are significantly better than the results of Mehrotra's method relative to the pressure peak values for the flat delta; the two vortex core system applied to the double delta and strake wing produce overall aerodynamic characteristics which have good agreement with data except for the pitching moment; and the computer time for the present method is about two thirds of that of Mehrotra's method.

Pao, J. L.↗

Review of Calculations on Point Defect Properties in Delta-Pu

The results of theoretical predictions of properties for vacancies and self-interstitial atoms (SIA) in δ-Pu are presented and reviewed. Three methods have been used for these predictions, namely the modified embedded atom method (MEAM), density functional theory (DFT) with and without spin polarization, and continuum mechanics (CM) models adapted to plutonium. The properties considered are formation and migration energies, and relaxation volumes of vacancies and SIA. Predicted values vary considerably. Nevertheless, all three methods predict that the activation energy for self-diffusion by vacancies is of similar magnitude as the SIA formation energy. Furthermore, the absolute magnitudes of relaxation volumes for vacancies and SIA are also similar, indicating that there exist no large bias for radiation-induced void swelling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of elliptic and higher order flow from ATLAS experiment at the LHC

We present a differential measurement of the azimuthal anisotropy of charged hadron production in Pb+Pb collisions at {radical}s{sub NN} = 2.76 TeV. This azimuthal anisotropy is expanded into a Fourier series in azimuthal angle, where the coefficient for each term, v{sub n}, characterizes the magnitude of the anisotropy at a particular angular scale. We extract v{sub 2}-v{sub 6} via a discrete Fourier analysis of the two-particle {Delta}{phi}-{Delta}{eta} correlation with a large {Delta}{eta} gap (|{Delta}{eta}| > 2), and via an event-plane method based on the forward calorimeter. Significant v{sub 2}-v{sub 6} values are observed over a broad range in p{sub T}, {eta} and centrality, and they are found to be consistent between the two methods in the transverse momentum region p{sub T} < 3-4 GeV. This suggests that the measured v{sub 2}-v{sub 6} obtained from two-particle correlations at low p{sub T} with a large {Delta}{eta} gap are consistent with the collective response of the system to the initial-state geometry fluctuations, and is not the result of jet fragmentation or resonance decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the measurement of the crack tip stress field as a means of determining Delta K(sub eff) under conditions of fatigue crack closure

The optical method of caustics has been successfully extended to enable stress intensity factors as low as 1MPa square root of m to be determined accurately for central fatigue cracks in 2024-T3 aluminium alloy test panels. The feasibility of using this technique to study crack closure, and to determine the effective stress intensity factor range, Delta K(sub eff), has been investigated. Comparisons have been made between the measured values of stress intensity factor, K(sub caus), and corresponding theoretical values, K(sub theo), for a range of fatigue cracks grown under different loading conditions. The values of K(sub caus) and K(sub theo) were in good agreement at maximum stress, where the cracks are fully open, while K(sub caus) exceeded K(sub theo) at minimum stress, due to crack closure. However, the levels of crack closure and values of Delta K(sub eff) obtained could not account for the variations of crack growth rate with loading conditions. It is concluded that the values of Delta K(sub eff), based on caustic measurements in a 1/square root of r stress field well outside the plastic zone, do not fully reflect local conditions which control crack tip behavior.

Wallhead, Ian R.↗

Magnetocaloric effect in manganites

The magnetocaloric effect (MCE) in La{sub 1-x}Sr{sub x}MnO{sub 3}, Sm{sub 0.55}Sr{sub 0.45}MnO{sub 3}, and PrBaMn{sub 2}O{sub 6} compounds is studied. The maximum values of MCE ({Delta}T{sub max}) determined by a direct method in the second and third compositions and in La{sub 0.9}Sr{sub 0.1}MnO{sub 3} are found to be much lower than those calculated from the change of the magnetic part of entropy in the Curie temperature (T{sub C}) and the Neel temperature (T{sub N}) range. The negative contribution of the antiferromagnetic (AFM) part of a sample in the La{sub 1-x}Sr{sub x}MnO{sub 3} system at 0.1 {<=} x {<=} 0.3 decreases {Delta}T{sub max} and changes the {Delta}T(T) curve shape, shifting its maximum 20-40 K above T{sub C}. Lower values of {Delta}T{sub max} are detected in the range T{sub C} = 130-142 K in polycrystalline and single-crystal Sm{sub 0.55}Sr{sub 0.45}MnO{sub 3} samples cooled in air. If such samples were cooled in an oxygen atmosphere (which restores broken Mn-O-Mn bonds and, thus, increases the volume of CE-type AFM clusters), the maximum in the temperature dependence of MCE is located at T{sub N} (243 K) for CE-type AFM clusters. A magnetic field applied to a sample during the MCE measurements transforms these clusters into a ferromagnetic (FM) state, and both types of clusters decompose at T = T{sub N}. The PrBaMn{sub 2}O{sub 6} composition undergoes an AFM-FM transition at 231 K, and the temperature dependence of its MCE has a sharp minimum at T = 234 K, where MCE is negative, and a broad maximum covering T{sub C}. The absolute values of MCE at both extrema are several times lower than those calculated from the change in the magnetic entropy. These phenomena are explained by the presence of a magnetically heterogeneous FM-AFM state in these manganites.

36 MATERIALS SCIENCE↗

A vortex-filament and core model for wings with edge vortex separation

A vortex filament-vortex core method for predicting aerodynamic characteristics of slender wings with edge vortex separation was developed. Semi-empirical but simple methods were used to determine the initial positions of the free sheet and vortex core. Comparison with available data indicates that: (1) the present method is generally accurate in predicting the lift and induced drag coefficients but the predicted pitching moment is too positive; (2) the spanwise lifting pressure distributions estimated by the one vortex core solution of the present method are significantly better than the results of Mehrotra's method relative to the pressure peak values for the flat delta; (3) the two vortex core system applied to the double delta and strake wings produce overall aerodynamic characteristics which have good agreement with data except for the pitching moment; and (4) the computer time for the present method is about two thirds of that of Mehrotra's method.

Pao, J. L.↗

Optimization of orbital assignment and specification of service areas in satellite communications

The mathematical nature of the orbital and frequency assignment problem for communications satellites is explored, and it is shown that choosing the correct permutations of the orbit locations and frequency assignments is an important step in arriving at values which satisfy the signal-quality requirements. Two methods are proposed to achieve better spectrum/orbit utilization. The first, called the delta S concept, leads to orbital assignment solutions via either mixed-integer or restricted basis entry linear programming techniques; the method guarantees good single-entry carrier-to-interference ratio results. In the second, a basis for specifying service areas is proposed for the Fixed Satellite Service. It is suggested that service areas should be specified according to the communications-demand density in conjunction with the delta S concept in order to enable the system planner to specify more satellites and provide more communications supply.

Wang, Cou-Way↗

VARIATION OF INNER RADIUS OF DUST TORUS IN NGC4151

Long-term optical and near-infrared monitoring observations for a type 1 active galactic nucleus (AGN) NGC 4151 were carried out for six years from 2001 to 2006 by using the MAGNUM telescope, and delayed response of flux variations in the K(2.2 {mu}m) band to those in the V(0.55 {mu}m) band was clearly detected. Based on cross-correlation analysis, we precisely measured a lag time {delta}t for eight separate periods and we found that {delta}t is not constant, changing between 30 and 70 d during the monitoring period. Since {delta}t is the light travel time from the central energy source out to the surrounding dust torus, this is the first convincing evidence that the inner radius of the dust torus did change in an individual AGN. In order to relate such a change of {delta}t with a change of AGN luminosity L, we present a method of taking an average of the observed V-band fluxes that corresponds to the measured value of {delta}t, and we find that the time-changing track of NGC 4151 in the {delta}t versus L diagram during the monitoring period deviates from the relation {delta}t {proportional_to} L {sup 0.5} expected from dust reverberation. This result, combined with the elapsed time from period to period for which {delta}t was measured, indicates that the timescale of dust formation is about one year, which should be taken into account as a new constraint in future studies of dust evolution in AGNs.

99 GENERAL AND MISCELLANEOUS↗

Metallurgical studies of NITRONIC 40 with reference to its use for cryogenic wind tunnel models

The characterstics of NITRONIC 40 were investigated in connection with its use in cryogenic wind tunnel models. In particular, the effects of carbide and sigma-phase precipitation resulting from heat treatment and the presence of delta ferrite were evaluated in relation to their effects on mechanical properties and the potential consequences of such degradation. Methods were examined for desensitizing the material and for possible removal of delta ferrite as a means of restoring the material to its advertised properties. It was found that heat treatment followed by cryogenic quenching is a technique capable of desensitizing NITRONIC 40. However, it was concluded that it is extremely difficult, if not impossible, to remove the delta ferrite from the existing stock of material. Furthermore, heat treatments for removing delta ferrite have to take place at temperatures that cause very large grain growth. The implications of using the degraded NITRONIC 40 material for cryogenic model testing were reviewed, and recommendations were submitted with regard to the acceptability of the material. The experience gained from the study of NITRONIC 40 clearly identifies the need to implement a policy for purchasing top-quality materials for cryogenic wind tunnel model applications.

Wigley, D. A.↗

A feasibility assessment of nuclear reactor power system concepts for the NASA Growth Space Station

A preliminary feasibility assessment of the integration of reactor power system concepts with a projected growth Space Station architecture was conducted to address a variety of installation, operational, disposition and safety issues. A previous NASA sponsored study, which showed the advantages of Space Station - attached concepts, served as the basis for this study. A study methodology was defined and implemented to assess compatible combinations of reactor power installation concepts, disposal destinations, and propulsion methods. Three installation concepts that met a set of integration criteria were characterized from a configuration and operational viewpoint, with end-of-life disposal mass identified. Disposal destinations that met current aerospace nuclear safety criteria were identified and characterized from an operational and energy requirements viewpoint, with delta-V energy requirement as a key parameter. Chemical propulsion methods that met current and near-term application criteria were identified and payload mass and delta-V capabilities were characterized. These capabilities were matched against concept disposal mass and destination delta-V requirements to provide a feasibility of each combination.

Bloomfield, H. S.↗

A feasibility assessment of installation, operation and disposal options for nuclear reactor power system concepts for a NASA growth space station

A preliminary feasibility assessment of the integration of reactor power system concepts with a projected growth space station architecture was conducted to address a variety of installation, operational disposition, and safety issues. A previous NASA sponsored study, which showed the advantages of space station - attached concepts, served as the basis for this study. A study methodology was defined and implemented to assess compatible combinations of reactor power installation concepts, disposal destinations, and propulsion methods. Three installation concepts that met a set of integration criteria were characterized from a configuration and operational viewpoint, with end-of-life disposal mass identified. Disposal destinations that met current aerospace nuclear safety criteria were identified and characterized from an operational and energy requirements viewpoint, with delta-V energy requirement as a key parameter. Chemical propulsion methods that met current and near-term application criteria were identified and payload mass and delta-V capabilities were characterized. These capabilities were matched against concept disposal mass and destination delta-V requirements to provide the feasibility of each combination.

Bloomfield, Harvey S.↗

Excited state baryon spectroscopy from lattice QCD

Here, we present a calculation of the Nucleon and Delta excited state spectrum on dynamical anisotropic clover lattices. A method for operator construction is introduced that allows for the reliable identification of the continuum spins of baryon states, overcoming the reduced symmetry of the cubic lattice. Using this method, we are able to determine a spectrum of single-particle states for spins up to and including $J = 7/2$, of both parities, the first time this has been achieved in a lattice calculation. We find a spectrum of states identifiable as admixtures of $SU(6) Ⓧ O(3)$ representations and a counting of levels that is consistent with the non-relativistic $qqq$ constituent quark model. This dense spectrum is incompatible with quark-diquark model solutions to the "missing resonance problem" and shows no signs of parity doubling of states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

K{yields}({pi}{pi}){sub I=2} decays and twisted boundary conditions

We propose a new method to evaluate the Lellouch-Luescher factor which relates the {Delta}I=3/2 K{yields}{pi}{pi} matrix elements computed on a finite lattice to the physical (infinite-volume) decay amplitudes. The method relies on the use of partially twisted boundary conditions, which allow the s-wave {pi}{pi} phase shift to be computed as an almost continuous function of the center-of-mass relative momentum and hence for its derivative to be evaluated. We successfully demonstrate the feasibility of the technique in an exploratory computation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improved FFT-based numerical inversion of Laplace transforms via fast Hartley transform algorithm

The disadvantages of numerical inversion of the Laplace transform via the conventional fast Fourier transform (FFT) are identified and an improved method is presented to remedy them. The improved method is based on introducing a new integration step length Delta(omega) = pi/mT for trapezoidal-rule approximation of the Bromwich integral, in which a new parameter, m, is introduced for controlling the accuracy of the numerical integration. Naturally, this method leads to multiple sets of complex FFT computations. A new inversion formula is derived such that N equally spaced samples of the inverse Laplace transform function can be obtained by (m/2) + 1 sets of N-point complex FFT computations or by m sets of real fast Hartley transform (FHT) computations.

Hwang, Chyi↗

Sympathetic cooling of the Ba{sup +} ion by collisions with ultracold Rb atoms: Theoretical prospects

State-of-the-art ab initio techniques have been applied to compute the potential energy curves of the (BaRb){sup +} molecular ion in the Born-Oppenheimer approximation for the singlet and triplet states dissociating into the ground-state {sup 1}S Rb{sup +} ion and the Ba atom in the ground {sup 1}S state or the lowest singlet or triplet d excited states, and for the singlet and triplet states dissociating into the ground-state {sup 2}S Rb atom and the ground-state {sup 2}S Ba{sup +} ion. The ground-state potential energy was obtained with the coupled-cluster method restricted to single, double, and nonperturbative triple excitations. The first triplet states in the {Sigma}, {Pi}, and {Delta} symmetries were computed with the restricted open-shell coupled-cluster method restricted to single, double, and nonperturbative triple excitations. All other excited-state potential energy curves were computed using the equation of motion approach within the coupled-cluster singles, doubles, and linear triples framework. The long-range coefficients describing the electrostatic, induction, and dispersion interactions at large interatomic distances are also reported. The electric transition dipole moments governing the x {sup 1{Sigma}{yields}1{Sigma}},{sup 1{Pi}} transitions have been obtained as the first residue of the polarization propagator computed with the linear response coupled-cluster method restricted to single and double excitations. Nonadiabatic radial and angular coupling matrix elements as well as the spin-orbit coupling matrix elements have been evaluated using the multireference configuration-interaction method restricted to single and double excitations with a large active space. With these couplings, the spin-orbit-coupled (relativistic) potential energy curves for the 0{sup +} and 1 states relevant for the running experiments have been obtained. Finally, relativistic transition moments and nonadiabatic coupling matrix elements were obtained from the nonrelativistic results and spin-orbit eigenvectors. The electronic structure input has been employed in the single-channel scattering calculations of the collisional cross sections between the Ba{sup +} ion and Rb atom. Both nonrelativistic and relativistic potentials were used in these calculations. Our results show that the inelastic cross section corresponding to the charge transfer from the Rb atom to the Ba{sup +} ion is much smaller than the elastic one over a wide range of energies up to 1 mK. This suggests that sympathetic cooling of the Ba{sup +} ion by collisions with ultracold Rb atoms should be possible.

74 ATOMIC AND MOLECULAR PHYSICS↗