SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Research and development studies for space program - instrumentation, communications, mechanical engineering, propulsion, systems analysis, and spacecraft advanced guidance
Modular design techniques improve methods of error detection, diagnosis, and recovery. Theoretical computer (MARCS (Modular Architecture for Reliable Computer Systems)) study deals with postulated and modeled technology indigenous to 1975-1980. Study developments are discussed.
The status of the NASA-EPA automotive thermal reactor technology program is summarized. This program is concerned primarily with materials evaluation, reactor design, and combustion kinetics. From engine dynamometer tests of candidate metals and coatings, two ferritic iron alloys (GE 1541 and Armco 18-SR) and a nickel-base alloy (Inconel 601) offer promise for reactor use. None of the coatings evaluated warrant further consideration. Development studies on a ceramic thermal reactor appear promising based on initial vehicle road tests. A chemical kinetic study has shown that gas temperatures of at least 900 K to 1000 K are required for the effective cleanup of carbon monoxide and hydrocarbons, but that higher temperatures require shorter combustion times and thus may permit smaller reactors.
An integrated propellant manufacturing plant and distribution system located at Kennedy Space Center is studied. The initial planned propellant and pressurant production amounted to 160 tons/day (TPD) LH2, 10 TPD GH2, 800 TPD LO2, 400 TPD LN2, and 120 TPD GN2. This was based on a shuttle launch frequency of 104 per year. During the study, developments occurred which may lower cryogen requirements. A variety of plant and processing equipment sizes and costs are considered for redundancy and supply level considerations. Steam reforming is compared to partial oxidation as a means of generating hydrogen. Electric motors, steam turbines, and gas turbines are evaluated for driving compression equipment. Various sites on and off Government property are considered to determine tradeoffs between costs and problems directly associated with the site, product delivery and storage costs, raw material costs, and energy costs. Coproduction of other products such as deuterium, methanol, and ammonia are considered. Legal questions are discussed concerning a private company's liabilities and its rights to market commercial products under Government tax and cost shelters.
The Earth Resources Laboratory sea remote sensing program has concentrated on project planning, data acquisition procedures, and data preparation techniques to establish a firm procedural basis for the program. Most of these procedural elements were established and proven during the three missions conducted in 1971. It is anticipated that the program in 1972 will see the analysis completed on the Mississippi Sound series and the first series of Eastern Gulf experiments allowing increased emphasis to be given to more intensive technique development studies, the interrelationship of parameters for the measurement and prediction of water circulation, and the demonstration of the application of these techniques.
The development of weight-saving advanced design concepts for shuttle airframe structure is presented. Design concepts under investigation employ selective composite reinforcement and/or efficient geometric arrangements. An effort to develop metallic panel designs which exploit the relaxation of smooth external-surface requirements for skin structure is reviewed. Available highlights from research and development studies which investigate the application of composite reinforcement to the design of two types of fuselage panels, a shear web, a large fuselage frame, and a landing-gear-door assembly are presented. Preliminary results from these studies suggest weight savings of 25 percent can be obtained.
Three separate and distinct modes of using the space shuttle system have been identified. These modes include the boost of a spacecraft plus one or more propulsion stages into earth orbit or parking orbit, the establishment and maintenance of automated observatories in space, and the support of exploratory research and instrument development. Studies show that approximately 60% of all planned NASA missions require a shuttle third stage. Illustrations are presented to show how the largest spacecraft, Viking, and its propulsion system, Centaur, and a communications satellite, with an Agena stage to place it into a geostationary orbit, would fit into the shuttle. Results of the NASA Shuttle Sortie Workshop studies are discussed together with prospects of European cooperation in future workshop experiments.
A concept called the low-cost modular spacecraft, in which the subsystems would be contained in replaceable modules and which would be capable of various applications, is under engineering development. Studies have shown that servicing of such a spacecraft on orbit by the Space Shuttle over an extended lifetime is more economical than three other alternatives: launching replacement satellites on conventional boosters as existing satellites fail, launching replacements by Shuttle, or launching replacement satellites and retrieving malfunctioning satellites by Shuttle. For on-orbit servicing, the Shuttle would use its Remote Manipulator system (RMS) to bring the malfunctioning satellite into its cargo bay. The Flight Support System (FSS) on the Orbiter used for servicing the satellite would include an appendage storage frame, a retention cradle, a positioning platform, a Module Exchange Mechanism (MEM), and a storage magazine. Ground simulations are under way with the Orbiter mockup.
This article reports the results of an investigation on time-sharing of a rebalance electronics among several sensors used in a strapdown navigation platform. Various concepts are given. The merits and demerits of the time-sharing for a typical situation are discussed in detail. A possible hardware realization is proposed. In addition, this study develops a general approach, applicable to other systems, for evaluating the use of time-sharing concept.
A full-scale field study of the wind over a simulated two-dimensional building is reported. The study develops an experiment to investigate the structure and magnitude of the wind fields. A description of the experimental arrangement, the type and expected accuracy of the data, and the range of the data are given. The data are expected to provide a fundamental understanding of mean wind and turbulence structure of the wind field around the bluff body. Preliminary analysis of the data demonstrates the reliability and completeness of the data in this regard.
A small manned facility, i.e., a small space station, placed in earth orbit by the Shuttle transportation system would be a viable, cost effective addition to the basic Shuttle system to provide many opportunities for R&D programs, particularly in the area of earth applications. The small space station would have many similarities with Skylab. This paper presents design concepts for an electrical power system (EPS) for the small space station based on Skylab experience, in-house work at Marshall Space Flight Center, SEPS (Solar Electric Propulsion Stage) solar array development studies, and other studies sponsored by MSFC. The proposed EPS would be a solar array/secondary battery system. Design concepts expressed are based on maximizing system efficiency and five year operational reliability. Cost, weight, volume, and complexity considerations are inherent in the concepts presented. A small space station EPS based on these concepts would be highly efficient, reliable, and relatively inexpensive.
An exhaustive design development study was performed to correlate the survivability of thin film to various parameters. Film material properties, film thicknesses, unsupported window areas, window aspect ratios, film/frame transitions, film reinforcing techniques, and material grain orientations were all considered. Several thin films were tested to acoustical loads which are expected during an Atlas-Centaur launch of the High Energy Astronomy Observatory Satellites (HEAO)
Program considers combustion and diffusive effects in analysis of supersonic, combustion-flow fields with imbedded subsonic regions. Effects of finite-rate chemistry, mixing, and wave propagation are linked together. Program handles up to 20 simultaneous shock waves. Some chemistry terms are computed for seven-species, eight-mechanism, hydrogen-and-air reaction scheme. Program is aid for supersonic-combustor development studies and is written in FORTRAN IV for batch execution on CYBER 175.
A study developed for the TCV B-737, designed to apply existing navigation aids plus magnetic leader cable signals and develop breaking and reverse thrust guidance laws to provide for rapid automated rollout, turnoff, and taxi to reduce runway occupation time for a wide variety of landing conditions for conventional commercial-type aircraft, is described. Closed loop guidance laws for braking and reverse thrust are derived for rollout, turnoff, and taxi, as functions of the landing speed, the desired taxi speed and the distance to go. Brake limitations for wet runway conditions and reverse thrust limitations are taken into account to provide decision rules to avoid tire skid and to choose an alternate turnoff point, farther down the runway, to accommodate extreme landing conditions.
Advances in the state-of-the-art of aerodynamics, dynamics, and structures suggest that the flight envelope of the tilt-rotor VTOL vehicle XV-15 can be expanded by an improved rotor blade design. A description is presented of an intensive airfoil development study which has been conducted in connection with the conceived possibilities. State-of-the-art design techniques were used to produce the new sections, and a wind tunnel 'fly-off' between the best airfoils was held. Advanced technology airfoils demonstrated significant improvements in aerodynamic characteristics compared to existing XV-15 blade airfoils
A solid-state transmitter at S-band frequencies will allow many low-power antenna array elements fed directly by the solid-state amplifier modules to combine power for transmission to earth in space. Two configurations, one the separate antenna and the other a sandwich concept are discussed. The results of two small hardware development studies are presented.
An implantable prosthetic for the control of urinary incontinence was developed and marketed. Three phases are presented: bench development studies, animal trials, and human clinical trials. This work was performed under the direction of a Research Team at Rochester General Hospital (RGH). Bench trials were completed on prototype hardware and provided early verification of the device's ability to withstand repeated cyclic testing. Configurational variants were evaluated and a preferred design concept was established. Silicone rubber (medical grade) was selected as the preferred material for the prosthesis.
A guide to the current state of the technology of simulating fixed-wing aircraft handling qualities and performance on or close to the ground is presented and pitfalls which may prevent an adequate implementation are indicated. The scope of possible applications in both aircraft design work and pilot training is considered and the requirements for mathematical model definitions and implementations are discussed. The current requirements for visual and motion systems, cockpit cueing, and software modelling are also reviewed, and illustrated with specific examples in areas of aircraft research and development studies and pilot training uses. Needs for further improvements and additional data acquisition are identified.