Search NASA⌕ Search

SEARCH · Search NASA

Results for “diameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Experiments and Simulations of Droplet Burning of Isobutanol Mixed with a Tier II Gasoline Certification Fuel and its Surrogate, Paper Number: SHTC2023-115267

This study presents an experimental and numerical results of combustion dynamics of a Tier II certification fuel/iso-butanol mixtures and its surrogate(S5)/iso-butanol mixtures. The experiments were carried out where gas transport was determined entirely by fuel evaporation to promote spherical symmetry during the burning process. The droplet initial diameters were in the range 0.55 mm to 0.62 mm. The combustion characteristics such as droplet diameters, flame standoff ratios and soot shell standoff ratios of indolene/iso-butanol mixtures are compared with S5/iso-butanol mixtures and the implications of iso-butanol addition to indolene and S5 on combustion are discussed. The presence of iso-butanol is experimentally found to reduce the formation of soot as the iso-butanol concentration was increased and the iso-butanol addition insignificantly influence the burning rate. Simulations were carried out with the detailed kinetic chemistry (324 species and 17608 reactions) from POLIMI. The detailed numerical model included unsteady gas and liquid transport, soot chemistry and radiative transport. The impact of iso-butanol on the burning rate, flame structure and soot formation are presented. Droplet burn rates were well predicted while flame diameters showed more variability depending on how the flame was defined in the numerical simulation (peak gas temperature and OH concentration). Simulations also show the influence of iso-butanol concentration on flame temperature, greenhouse gas emissions and soot formations.

Guo, Songtao↗
DOE OSTI2022

Combustion Characteristics of a Tier II Gasoline Certification Fuel and its Surrogate with Iso-butanol: experiments and detailed numerical modeling

This presentation will describe results of an experimental and numerical study of combustion of a Tier II gasoline certification fuel and its surrogate blended with iso-butanol as a potential biofuel additive. The experiments were carried out under conditions where gas transport originated entirely by fuel evaporation with external convection (both forced and natural) were minimized. The resulting near spherically symmetric droplet flames were amenable to detailed numerical modeling. The droplet initial diameters were in the narrow range of 0.55 mm to 0.62 mm while and burning is performed under standard atmosphere. The combustion characteristics such as evolution of droplet, flame and soot shell diameters for indolene/iso-butanol and surrogate/iso-butanol mixtures are compared. The presence of iso-butanol is experimentally found to reduce the formation of soot as the iso-butanol concentration was increased. Simulations are also reported using a detailed kinetic chemistry comprised of 324 species and 17608 reactions using the CRECK POLIMI mechanism. The detailed numerical model included unsteady gas and liquid transport, soot chemistry and radiative transport. Droplet burn rates were well predicted while flame diameters showed more variability depending on how the flame was defined in the numerical simulation (peak gas temperature and OH concentration). Simulations also show the influence of iso-butanol concentration on flame temperature, greenhouse gas emissions and particulate emissions.

Guo, Songtao↗
DOE OSTI2022

Combustion characteristics and detailed simulations of surrogates for a Tier II gasoline certification fuel

An experimental and numerical study of combustion of a gasoline certification fuel (‘indolene’), and four (S4) and five (S5) component surrogates for it, is reported for the configurations of an isolated droplet burning with near spherical symmetry in the standard atmosphere, and a single cylinder engine designed for advanced compression ignition of pre-vaporized fuel. The intent was to compare performance of the surrogate for these different combustion configurations and to assess the broader applicability of the kinetic mechanism and property database for the simulations. A kinetic mechanism comprised of 297 species and 16797 reactions was used in the simulations that included soot chemistry and accounted for unsteady transport, liquid diffusion inside the droplet, radiative heat transfer, and variable properties. The droplet data showed a clear preference for the S5 surrogate in terms of burning rate. The simulations showed generally very good agreement with measured droplet, flame, and soot shell diameters. Measurements of combustion timing, in-cylinder pressure, and mass-averaged gas temperature were also well predicted with a slight preference for the S5 surrogate. Preferential vaporization was not evidenced from the evolution of droplet diameter but was clearly revealed in simulations of the evolution of mixture fractions inside the droplets. The influence of initial droplet diameter (Do) on droplet burning was strong, with S5 burning rates decreasing with increasing Do due to increasing radiation losses from the flame. Flame extinction was predicted for Do =3.0 mm as a radiative loss mechanism but not predicted for smaller Do for the conditions of the simulations.

Guo, Songtao↗
DOE OSTI2023

Hydraulically opened cone vertical tube diffuser with slanted anti-siphon hole

A diffuser for a water heater fill tubes having a tube wall with an outside diameter. The diffuser includes an elongated flexible diffuser body for positioning at the outlet end of the fill tube. The diffuser body has a sealing end for sealing with an outside surface of the fill tube wall closest to the inlet end of the fill tube, and an open end for positioning at an end closest to the outlet end of the fill tube. The open end has a diameter larger than an outside diameter of the tube wall, thereby creating an diffuser water outlet opening between the diffuser body and the tube wall for redirecting radial water flow emanating from the fill tube water outlet opening(s) toward the diffuser outlet opening. A fill tube assembly for a water heater, a water heater, and a method for heating water are also disclosed.

Rendall, Joseph D.↗
DOE OSTI2020

Prediction for Pressure Differential Across HEPA Filter Media Based on Media Characteristics and Particle Size Distribution

A new method for predicting the pressure drop across High Efficiency Particulate Air (HEPA) filter media is proposed based upon mass deposited onto the filter and known physical characteristics of the filter media. Detailed are the methods used in conjunction with current filter loading models to predict the pressure drop, as well as tests conducted to validate the methods. The benefit of a prediction model for practical use lies in the manufacturing and service life of nuclear grade HEPA filters. HEPA filters for use in nuclear facilities have a prescribed expiration date and a maximum allowable operating pressure drop. Therefore, the ability to predict the pressure drop across a filter and relate it to an expected length of service time can enable a reduction in wasted filters. This will allow for more informed decisions to be made based upon the dictated life cycle of the filters. Also, understanding and predicting how the pressure drop of HEPA filter media behaves as a function of physical characteristics and loaded mass can assist in future design and manufacturing of filter media. Currently, most existing pressure drop models are either computationally based or analytical methods relying on data gathered during tests. Neither are practical for prediction; the computational methods are difficult to implement, and the current analytical methods are more useful as tools for analysis. The current analytical model developed by Bergman et al. is based upon the pressure drop from each media fiber and modeling the deposited particles as newly formed fibers. Using Bergman's model and the media properties, air properties, and known aerosol particle size distribution, a pressure drop curve as a function of loaded mass can be created. This curve implies initial loading in the depth of the filter media with a transition to pure surface loading on the filter face, and a sensitivity to an evolving particle size distribution as mass continues to load onto the filter. To implement the predictive model, knowledge of the mean filter fiber diameter and porosity of the filter media is required. Traditionally, the mean fiber diameter is calculated as an effective diameter from prior media testing, however, in this study a Scanning Electron Microscope (SEM) technique is used to acquire this variable. Validation of the predictive model is provided by flat sheet media tests under a controlled environment with a measured particle size distribution of the challenge aerosol and shows reasonable preliminary agreement.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

An influence of manufacturing tolerances on Pin-Cell k-infinity of MOX fuel using data from the FUBILA experiment program

An influence of manufacturing tolerances (MTs) was evaluated on the pin-cell k-infinity of MOX fuel through the random sampling of CASMO5 calculations. The data from the FUBILA experiment program was used as the manufacturing parameters. For the uncertainties of element/isotope mass fractions, their covariance matrices were calculated by the generalized least square method. The total k-infinity uncertainty was 120-250 pcm (percent mille). From the breakdown of k-infinity uncertainty per materials, the MTs of fuel pellet had a dominant influence. The individual influences were also evaluated for element/isotope mass fractions, an inner/outer diameter, and a density. Those of element/isotope mass fractions were less than a few dozen pcm. Since the perturbations of fuel pellet diameter and density caused large variations to the total amount of heavy metals and effect of spatial self-shielding, they had a negative correlation with the k-infinity perturbation. On the AG3 (Al-Mg alloy) over-cladding, the inner/outer diameter perturbations had both negative and positive correlations. The negative one was due to decrease in amount of light water and the positive one was due to increase in amount of AG3. Since the effect of neutron slowing-down by light water had a dominant influence, the influence of the former negative correlation was larger than that of the latter positive correlation. It is, therefore, concluded that the consideration of the MTs that had a large influence on the effect of neutron slowing-down is important for precise quantification of the pin-cell k-infinity uncertainty of MOX fuel. (author)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Base-catalyzed sol-gel inks for direct ink writing of high resolution hierarchically porous carbon aerogels

According to one aspect of an inventive concept, an ink includes a base catalyst, a sol gel precursor composition, and a block copolymer. According to another aspect of an inventive concept, an aerogel includes a three-dimensional printed structure having printed ligaments geometrically arranged, where an average diameter of the printed ligaments is in a range of greater than 0 microns and less than 50 microns. In addition, an average distance between a center of a first of the printed ligaments and a center of a second of the printed ligaments is at least equal to the average diameter of the printed ligaments, where the first and the second of the printed ligaments are adjacent. Each printed ligament includes of a plurality of random pores, where an average diameter of the random pores is less than 50 nanometers.

Zhu, Cheng↗
DOE OSTI2025

TEM Characterization of Nanostructured Grade 91 Neutron Irradiated to 6 DPA at 300 °C and 500 °C

Previously, samples of coarse grained (CG, grain diameter > 1 µm), ultra-fine grained (UFG, 1 µm> grain diameter> 100 nm), and nanocrystalline (NC, 100 nm> grain diameter) grade 91 steel were neutron irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). Grade 91 is a ferritic/martensitic steel alloy with a nominal composition of Fe-9%Cr-1%Mo by weight, and it is being studied for applications in advanced nuclear reactor designs including as a fuel cladding material in gas cooled reactors. To assess the viability of this alloy for nuclear applications, the role of grain boundary size has not been sufficiently explored as a mechanism for developing radiation-tolerant materials. To achieve an UFG microstructure the material was processed using equal channel angular pressing (ECAP), and the NC microstructure was achieved through high pressure torsion (HPT). Such samples of various geometries for different types of characterization were irradiated to a dose of 6 displacements per atom (DPA) at separate temperature conditions of 300 °C and 500 °C. Thus, there were a total of 6 experimental conditions, three grain sizes (CG, UFG, and NC), each irradiated at two different temperature conditions (300 °C and 500 °C).

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Soil pore network response to freeze-thaw cycles in permafrost aggregates

This dataset contains data used for the paper "Pore network response to freeze-thaw cycles in permafrost aggregates". The Related References field will be updated with a full citation when available.Climate change in Arctic landscapes may increase freeze-thaw frequency within the active layer as well as newly thawed permafrost. A highly disruptive process, freeze-thaw can deform soil pores and alter the architecture of the soil pore network with varied impacts to water transport and retention, redox conditions, and microbial activity. Our objective was to investigate how freeze-thaw cycles impacted the pore network of newly thawed permafrost aggregates to improve understanding of what type of transformations can be expected from warming Arctic landscapes. We measured the impact of freeze-thaw on pore morphology, pore throat diameter distribution, and pore connectivity with X-ray computed tomography (XCT) using six permafrost aggregates with sizes of 2.5 cm3 from a mineral soil horizon (Bw; 28-50 cm depths) in Toolik, Alaska. Freeze-thaw cycles were performed using a laboratory incubation consisting of five freeze-thaw cycles (-10˚C to 20˚C) over five weeks. Our findings indicated decreasing spatial connectivity of the pore network across all aggregates with higher frequencies of singly connected pores following freeze-thaw. Water-filled pores that were connected to the pore network decreased in volume while the overall connected pore volumetric fraction was not affected. Shifts in the pore throat diameter distribution were mostly observed in pore throats ranges of 100 microns or less with no corresponding changes to the pore shape factor of pore throats. Responses of the pore network to freeze-thaw varied with aggregate, suggesting that initial pore morphology may play a role in driving freeze-thaw response. Our research suggests that freeze-thaw alters the microenvironment of permafrost aggregates during the incipient stage of deformation following permafrost thaw, impacting soil properties and function in Arctic landscapes undergoing transition. This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/Erin-Rooney/XCT-freezethaw (DOI: 10.5281/zenodo.5816355).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Development of Large Bore Rabbit Capsules in Support of BWR Cladding Irradiations in HFIR

The High Flux Isotope Reactor (HFIR) is an ideal tool for materials irradiation testing because of its intense steady-state neutron flux. Many programs take advantage of HFIR’s central flux trap for irradiation experiments using capsules, also known as rabbits, to support advanced materials development and reactor design. The facility that makes up the HFIR flux trap has recently undergone a design change that increases the HFIR primary coolant volumetric flow rate by removing restrictions in the system. As a result, the usable cross-sectional area within the facility increased, opening the door to increase the cross-sectional area of the rabbit capsules that fill the facility. This report documents a new large-diameter rabbit housing that increases the usable volume within the rabbit capsule by 22.6%. However, challenges arise with increasing the capsule size, such as establishing a new maximum capsule operating pressure and determining the thermal-hydraulic characteristics. This report addresses those challenges with previously adopted HFIR safety methods. The rupture pressure of the rabbit housings is demonstrated while verifying that capsule swelling during and after rupture will not block coolant flow. Then, a safety factor is applied to ascertain an administrative operating pressure. Additionally, the thermal-hydraulic performance of the HFIR facility filled with large-diameter rabbit capsules is shown to not violate previously determined safety criteria. Next, heat transfer coefficients are determined for use in design calculations. Furthermore, this report gives an example of internal configurations for the new, larger rabbit capsules that use relevant boiling water reactor (BWR) cladding geometry. Finally, this report documents an example thermal design performance for a rabbit capsule containing six gauge-curved tensile tube specimens. The thermal performance gives predicted temperature distributions within the capsule and shows the expected temperature of the passive thermometers for post-irradiation temperature comparisons.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

SPRUCE Root Production Assessed with Manual Minirhizotrons Resolved to Plant Functional Type, 2015-2021

This dataset contains raw root length and diameter for individual roots and estimated root population production measurements from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA. Measurements started at the beginning of whole ecosystem warming manipulations in 2015 through 2021 (2015-05-26 to 2021-09-01). Root morphology and estimated production were quantified throughout the peat profile with manual minirhizotrons deployed within SPRUCE plots. Images were processed using commercial software to quantify the length and diameter of individual roots. Roots were visually assigned to a plant functional type (PFT) of either (ericaceous) shrub, herb (sedges and Maianthemum trifolium), or tree (Larix laricina, Picea mariana) based on expert opinion. The biomass of individual roots was estimated using PFT-specific allometric equations (Iversen et al., 2018). Production per day was estimated as the length of new roots produced between imaging sessions, divided by the number of days between imaging sessions. These values were placed on a m2 aboveground area basis and scaled to a standard depth of 1m (roots are not evenly distributed with depth, do not interpret value as being on a m3 basis). Maximum and average (weighted by production length) depth of each PFT were also estimated within each minirhizotron tube. Annual production was interpolated as the average of four methods to scale these data (see Weber et al, 2026). Standing crop of roots was estimated for each tube as the maximum visible amount (both length and mass) of roots of that PFT for that year. These data expand the ability of researchers to accurately estimate the belowground dynamics of peatland vegetation, as well as the role that fine roots may play in impacting the fluxes of carbon within peatlands. This dataset contains three data files in comma-separate values (*.csv) format. This dataset contains one data file in comma-separate values (.csv) format. Additional metadata are provided: three data dictionaries and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Formation and Shape Changing of Conductive Helical Ribbons via Deposition of Highly Stressed Films on Mechanically Responsive Substrates

Abstract This work demonstrates that the electrodeposition of highly stressed films on compliant ribbons is a robust process to obtain helical structures with excellent mechanical stability and potentially high thermal and electrical conductance. Electrodeposition on end‐tethered ribbons alters their axial and bending stiffness while imparting mechanical stress to drive the formation of a helix with a microscale diameter and pitch in a controlled and scalable manner. The process generates helices with diameters and pitches between 80 and 200 µm and lengths as large as several millimeters. The approach is amenable to parallel processing a large number of 3D structures on any substrate, including large‐area semiconductor wafers. This phenomenon is explained in terms of the change of stress gradients as material is added. Applications of the fabricated helices include antennas, metamaterials, and slow‐wave structures in frequency ranges not previously attainable.

Chemistry↗
DOE OSTI2023

Overcoming Barriers Associated with Oral Delivery of Differently Sized Fluorescent Core‐Shell Silica Nanoparticles

Oral delivery, while a highly desirable form of nanoparticle-drug administration, is limited by challenges associated with overcoming several biological barriers. Here, in this study, the authors study how fluorescent and poly(ethylene glycol)-coated (PEGylated) core-shell silica nanoparticles sized 5 to 50 nm interact with major barriers including intestinal mucus, intestinal epithelium, and stomach acid. From imaging fluorescence correlation spectroscopy studies using quasi-total internal reflection fluorescence microscopy, diffusion of nanoparticles through highly scattering mucus is progressively hindered above a critical hydrodynamic size around 20 nm. By studying Caco-2 cell monolayers mimicking the intestinal epithelia, it is observed that ultrasmall nanoparticles below 10 nm diameter (Cornell prime dots, [C’ dots]) show permeabilities correlated with high absorption in humans from primarily enhanced passive passage through tight junctions. Particles above 20 nm diameter exclusively show active transport through cells. After establishing C’ dot stability in artificial gastric juice, in vivo oral gavage experiments in mice demonstrate successful passage through the body followed by renal clearance without protein corona formation. Results suggest C’ dots as viable candidates for oral administration to patients with a proven pathway towards clinical translation and may generate renewed interest in examining silica as a food additive and its effects on nutrition and health.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unlocking Larger Scales and Aspect Ratios in 3D Printed Glass: Coupling Active Mixing and UV Curing for Advanced Printability and Crack Resistance

Recent developments in additive manufacturing (AM) of glass via silica-filled inks have facilitated fabrication of previously unattainable geometries and compositions. However, the maximum processable size of 15 mm limits the use of these prints in applications such as optics. A key limitation lies in the trade-off between material printability and green strength: increasing silica content in the feedstock improves crack resistance and reduces shrinkage but results in dramatic changes in viscoelastic properties that hinder flowability. Here, this paper presents a novel approach that offers expanded versatility in processable size, feedstock formulation, and printing. Described here is a direct ink writing (DIW) system coupled with an active high-shear micromixer and UV light source, capable of simultaneously printing multiple inks with a wide range of rheological properties. Choice of silica sourc, solvent, UV-curable binder, and dispersant is used to tune the ink rheology and improve printability and mechanical properties. Imparting high shear with the micromixer while UV-curing the extrudate allows for increased ink viscosities and reduced nozzle diameters, enabling printing finer feature sizes. With these advances, thin-walled high-aspect ratio structures and a crack-free glass disk measuring 44 mm in diameter are demonstrated, an increase of 3× in the greatest dimension compared to current state-of-the-art.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microstructural and chemical characterization of a purple pigment from a Faiyum mummy portrait

Results are presented from analyses that were conducted to explain the presence of chromium, detected noninvasively using energy dispersive X-ray fluorescence (XRF), in the unusually large (2-3mm diameter) rough gem-like purple pigment particles in the paint used for a Faiyum mummy portrait. An approximately 50 µm diameter particle of the chromium-containing purple pigment was extracted from the Portrait of a Bearded Man, dated to Roman Imperial Egypt in the second century, circa 170-180 CE, accession #32.6 in the Walters Art Museum collection. The particle was characterized using energy dispersive X-ray fluorescence analysis, electron microscopy, diffraction, and atom probe tomography. It is demonstrated that the purple pigment particle is a heterogeneous organic pigment, specifically, a lake pigment likely derived from either plant or insect matter, which contains minor percentages of both transition metals and alkali / alkali earth metals, with nanometer-scale crystallites of lead carbonates and sulfates. The analyses revealed for the first time the nanoscale microstructure and stratigraphy in an ancient lake pigment. Results suggest that similarities with respect to time-period and place of production may be developed among unprovenienced Faiyum mummy portraits to help localize workshops or artists, using analyses focused on lake pigments to characterize specifically metal-based mordants.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Allometric relationships and trade‐offs in 11 common M editerranean‐climate grasses

Abstract Biomass allocation in plants is the foundation for understanding dynamics in ecosystem carbon balance, species competition, and plant–environment interactions. However, existing work on plant allometry has mainly focused on trees, with fewer studies having developed allometric equations for grasses. Grasses with different life histories can vary in their carbon investment by prioritizing the growth of specific organs to survive, outcompete co‐occurring plants, and ensure population persistence. Further, because grasses are important fuels for wildfire, the lack of grass allocation data adds uncertainty to process‐based models that relate plant physiology to wildfire dynamics. To fill this gap, we conducted a greenhouse experiment with 11 common California grasses varying in photosynthetic pathway and growth form. We measured plant sizes and harvested above‐ and belowground biomass throughout the life cycle of annual species, while for the establishment stage of perennial grasses to quantify allometric relationships for leaf, stem, and root biomass, as well as plant height and canopy area. We used basal diameter as a reference measure of plant size. Overall, basal diameter is the best predictor for leaf and stem biomass, height, and canopy area. Including height as another predictor can improve model accuracy in predicting leaf and stem biomass and canopy area. Fine root biomass is a function of leaf biomass alone. Species vary in their allometric relationships, with most variation occurring for plant height, canopy area, and stem biomass. We further explored potential trade‐offs in biomass allocation across species between leaf and fine root, leaf and stem, and allocation to reproduction. Consistent with our expectation, we found that fast‐growing plants allocated a greater fraction to reproduction. Additionally, plant height and specific leaf area negatively influenced the leaf‐to‐stem ratio. However, contrary to our hypothesis, there were no differences in root‐to‐leaf ratio between perennial and annual or C 4 and C 3 plants. Our study provides species‐specific and functional‐type‐specific allometry equations for both above‐ and belowground organs of 11 common California grass species, enabling nondestructive biomass assessment in California grasslands. These allometric relationships and trade‐offs in carbon allocation across species can improve ecosystem model predictions of grassland species interactions and environmental responses through differences in morphology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Heterogeneity of soil structure and fertility during desertification of alpine grassland in northwest Sichuan

Abstract The variations of soil structure and soil physical–chemical properties in the process of alpine grassland desertification were revealed, and the indicators of grassland desertification were put forward in order to deepen the understanding of the law of degradation succession and development of alpine grassland. It was used to provide scientific basis for ecological restoration and improvement of ecological service function of alpine grassland. With severe desertification alpine grassland as the core in the Hongyuan County, Tibetan Qiang Autonomous Prefecture of Ngawa, Sichuan Province, China, along both the directions of wetland and arid grassland, the heterogeneity of soil structure and soil fertility in both directions was studied by the analysis of the mean weight diameter (MWD), geometric mean diameter (GMD), >0.25 mm aggregate content ( R 0.25 ), fractal dimension ( D ), soil bulk density, soil moisture content, and soil nutrients. Our results showed that MWD, GMD, and R 0.25 all gradually increased, but the D decreased with the reduction in the degree of desertification in the arid grassland and wetland, resulting in the strong stability of soil structure. The decreasing rate of the D in the direction of arid grassland was faster than that of wetland. Therefore, soil structure stability and erosion resistance in the direction of arid grassland were stronger than that of wetland soil; the D had different response to aggregates with different particle sizes. The aggregate less than 0.25 mm ( r = 0.981, P < 0.01) and 1–2 mm ( r = −0.79, P < 0.01) had the largest responses in the direction of the arid grassland and wetland, respectively; the aggregate more than 1 mm and 1–2 mm can be used as indicators to evaluate desertification of the soil in the direction of the arid grassland and wetland, respectively. The higher the content of the indicating aggregates, the weaker the degree of the desertification.

Ma, Li↗
DOE OSTI2023

Effects of sub‐mm cylindrical voids on detonation performance in PBX 9501

Abstract Internal features of varying scale and geometry are always present in explosives systems. Below a critical length, dependent on the explosive, these features can operate as a driving force for energy concentration and reaction, known as hotspots. At larger length scales, internal features result in jetting and detonation wave shaping, allowing for bulk work to be done by the explosive as is seen in shape charges. To date, a large volume of work has been performed to simulate hotspot ignition and large‐scale wave shaping. However, little experimental data exists on the effects of features in intermediate length scales, 0.1 to 1 millimeter. It has been observed in many tests that these small‐scale features can influence the high explosive (HE) performance and in some cases cause substantial damage to adjacent systems. This work provides quantitative data on the effects of machined voids moderately above more typical hotspot lengths, 0.3–0.8 mm in diameter, in PBX 9501 pressed to 1.785 g cm −3 ±2.5 mg cm −3 . Streak imaging was used to visualize void collapse, jet velocity, re‐initiation time, and wave shape evolution. Delay in detonation front propagation time was found to be linearly dependent on the void diameter and jet velocity was found to be independent within the tested range and resolution. Cut‐back experiments were used to investigate wave shape distortion and evolution downstream of the void, showing consistent growth and decay shapes across all void sizes. Simulations using CTH, a hydrocode by Sandia National Laboratory, were used to investigate void collapse showing agreement with the trends of experimental results but yielded inaccurate wave shape development delay values. Both simulation and experimental results identified several re‐initiation mechanisms with jetting and subsequent double shocking of localized HE being the dominant mechanisms for the void sizes that were studied.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗