Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Dynamics of solar cosmic ray events - Processes at large heliocentric distances /much greater than 1 AU/

Observations of solar cosmic ray events at heliocentric distances up to 6 AU and beyond obtained by the Pioneer 10 and 11 spacecraft are discussed in terms of the propagation of energetic charged particles in interplanetary space. Following a review of the diffusion propagation model used to explain cosmic ray transport, the statistical studies of McCarthy and O'Gallagher (1976) and Zwickl and Webber (1977) of the relations of event parameters with radial distance and the simultaneous observation studies of Hamilton (1977) are reviewed, and it is noted that the results imply a slowly increasing radial diffusion coefficient out to about 6 AU. More recent analyses of data obtained at heliocentric distances greater than 10 AU are then presented which indicate that the coefficient of radial diffusion may actually be decreasing with radial distance beyond 5 AU. Finally, theoretical predictions of the radial variation of the diffusion coefficient are presented which take into account the background interplanetary medium and are shown to be in agreement with observations.

Hamilton, D. C.↗

RADIAL DEPENDENCE OF PEAK PROTON AND IRON ION FLUXES IN SOLAR ENERGETIC PARTICLE EVENTS: APPLICATION OF THE PATH CODE

The radial dependence of particle peak fluxes in large solar energetic particle (SEP) events is important in determining the potential impact of space weather hazards on space missions. Using the Particle Acceleration and Transport in the Heliosphere code, we model the acceleration and transport of protons and iron ions at evolving coronal mass ejection shocks propagating throughout the inner heliosphere from about 0.1 to 2.5 AU. An example shock with a compression ratio of 3.9 and a speed of 1000 km s{sup -1} close to the Sun is modeled using a two-dimensional MHD ZEUS code. The compression ratio and shock speed weakened to 2.3 and 630 km s{sup -1}, correspondingly, at 2 AU. Shocks with 15 Degree-Sign , 45 Degree-Sign , and 75 Degree-Sign angles between the upstream magnetic field and the shock normal were studied. The shock angle was kept constant throughout the simulation. Both gradual and impulsive events are studied. Diffusive shock acceleration is assumed at the shock and we use a total diffusion coefficient that includes a parallel diffusion coefficient which takes into account the upstream wave amplification, and a perpendicular diffusion coefficient which is based on the NonLinear Guiding Center theory. The transport of particles escaping from the shock is modeled using a Monte Carlo approach. Time-intensity profiles for protons and iron ions are obtained. We analyzed the radial dependence of peak fluxes (J) for both protons and iron ions from 0.5 to 2 AU. We find that the functional dependence is softer than R {sup -3} and is about R {sup -2.9} to R {sup -1.8} in the energy range of 0.3-5 MeV nuc{sup -1}. Quasi-perpendicular shock showed a steeper radial dependence than a quasi-parallel shock. Mixed events show a softer radial dependence at energies above 500 keV nuc{sup -1} for iron ions and above 1 MeV for protons. The values of J(R) depend on seed particle composition, particle energy, shock obliquity, and the interplanetary turbulence level. Consequently, we advocate using SEP event-specific computer modeling rather than empirical formulae for future forecasting of the radiation environment throughout the heliosphere during large SEP events.

79 ASTRONOMY AND ASTROPHYSICS↗

Lithium ion diffusion in Li β-alumina single crystals measured by pulsed field gradient NMR spectroscopy

The lithium ion diffusion coefficient of a 93% Li β-alumina single crystal was measured for the first time using pulsed field gradient (PFG) NMR spectroscopy with two different crystal orientations. The diffusion coefficient was found to be 1.2 × 10{sup −11} m{sup 2}/s in the direction perpendicular to the c axis at room temperature. The Li ion diffusion coefficient along the c axis direction was found to be very small (6.4 × 10{sup −13} m{sup 2}/s at 333 K), which suggests that the macroscopic diffusion of the Li ion in the β-alumina crystal is mainly two-dimensional. The diffusion coefficient for the same sample was also estimated using NMR line narrowing data and impedance measurements. The impedance data show reasonable agreement with PFG-NMR data, while the line narrowing measurements provided a lower value for the diffusion coefficient. Line narrowing measurements also provided a relatively low value for the activation energy and pre-exponential factor. The temperature dependent diffusion coefficient was obtained in the temperature range 297–333 K by PFG-NMR, from which the activation energy for diffusion of the Li ion was estimated. The activation energy obtained by PFG-NMR was smaller than that obtained by impedance measurements, which suggests that thermally activated defect formation energy exists for 93% Li β-alumina single crystals. The diffusion time dependence of the diffusion coefficient was observed for the Li ion in the 93% Li β-alumina single crystal by means of PFG-NMR experiments. Motion of Li ion in fractal dimension might be a possible explanation for the observed diffusion time dependence of the diffusion coefficient in the 93% Li β–alumina system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

METAL DIFFUSION IN SMOOTHED PARTICLE HYDRODYNAMICS SIMULATIONS OF DWARF GALAXIES

We perform a series of smoothed particle hydrodynamics simulations of isolated dwarf galaxies to compare different metal mixing models. In particular, we examine the role of diffusion in the production of enriched outflows and in determining the metallicity distributions of gas and stars. We investigate different diffusion strengths by changing the pre-factor of the diffusion coefficient, by varying how the diffusion coefficient is calculated from the local velocity distribution, and by varying whether the speed of sound is included as a velocity term. Stronger diffusion produces a tighter [O/Fe]–[Fe/H] distribution in the gas and cuts off the gas metallicity distribution function at lower metallicities. Diffusion suppresses the formation of low-metallicity stars, even with weak diffusion, and also strips metals from enriched outflows. This produces a remarkably tight correlation between “metal mass-loading” (mean metal outflow rate divided by mean metal production rate) and the strength of diffusion, even when the diffusion coefficient is calculated in different ways. The effectiveness of outflows at removing metals from dwarf galaxies and the metal distribution of the gas is thus dependent on the strength of diffusion. By contrast, we show that the metallicities of stars are not strongly dependent on the strength of diffusion, provided that some diffusion is present.

79 ASTRONOMY AND ASTROPHYSICS↗

Geomagnetic field fluctuations at synchronous orbit. II - Radial diffusion

Power spectra of geomagnetic-field variations measured at synchronous equatorial altitude (geomagnetic shell parameter about 6.6) in the magnetosphere are used to calculate the time dependence of the radial diffusion coefficient for particles in the radiation belts. The diffusion coefficients calculated are mainly applicable for relativistic electrons. The magnitudes of the derived diffusion coefficients using data only from local day observations are consistent with those reported from analyses of most particle observations and thus are slightly larger than those derived from magnetic sudden commencements. They are consistent with the diffusion coefficients calculated from power spectra of ground-based geomagnetic data measured near L = 4.

Lanzerotti, L. J.↗

A feasibility study for measuring stratospheric turbulence using metrac positioning system

The feasibility of obtaining measurements of Lagrangian turbulence at stratospheric altitudes is demonstrated by using the METRAC System to track constant-level balloons. The basis for current estimates of diffusion coefficients are reviewed and it is pointed out that insufficient data is available upon which to base reliable estimates of vertical diffusion coefficients. It is concluded that diffusion coefficients could be directly obtained from Lagrangian turbulence measurements. The METRAC balloon tracking system is shown to possess the necessary precision in order to resolve the response of constant-level balloons to turbulence at stratospheric altitudes. A small sample of data recorded from a tropospheric tetroon flight tracked by the METRAC System is analyzed to obtain estimates of small-scale three-dimensional diffusion coefficients. It is recommended that this technique be employed to establish a climatology of diffusion coefficients and to ascertain the variation of these coefficients with altitude, season, and latitude.

Gage, K. S.↗

NUMERICAL ANALYSIS OF THE FOKKER-PLANCK EQUATION WITH ADIABATIC FOCUSING: ISOTROPIC PITCH-ANGLE SCATTERING

We present numerical solutions to both the standard and modified two-dimensional Fokker-Planck equations with adiabatic focusing and isotropic pitch-angle scattering. With the numerical solution of the particle distribution function, we then discuss the related numerical issues, calculate the parallel diffusion coefficient using several different methods, and compare our numerical solutions for the parallel diffusion coefficient to the analytical forms derived earlier. We find the numerical solution to the diffusion coefficient for both the standard and modified Fokker-Planck equations agrees with that of Shalchi for the mean squared displacement method of computing the diffusion coefficient. However, we also show the numerical solution agrees with that of Litvinenko and Shalchi and Danos when calculating the diffusion coefficient via the velocity correlation function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The improvement of the method of equivalent cross section in HTR

The Method of Equivalence Cross-Sections (MECS) is a combined transport-diffusion method. By appropriately adjusting the diffusion coefficient of homogenized absorber region, the diffusion theory could yield satisfactory results for the full core model with strong neutron absorber material, for example the control rod in High temperature gas cooled reactor (HTR). Original implementation of MECS based on 1-D cell transport model has some limitation on accuracy and applicability, a new implementation of MECS based on 2-D transport model are proposed and tested in this paper. This improvement can extend the MECS to the calculation of twin small absorber ball system which have a non-circular boring in graphite reflector and different radial position. A least-square algorithm for the calculation of equivalent diffusion coefficient is adopted, and special treatment for diffusion coefficient for higher energy group is proposed in the case that absorber is absent. Numerical results to adopt MECS into control rod calculation in HTR are encouraging. However, there are some problems left. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Self-diffusion Measurements of Liquid Sn Using the Shear Cell Technique and Stable Density Layering

By utilizing the shear cell technique and achieving stable density layering with the addition of an alloying element Bi, the self-diffusion coefficients of liquid Sn were measured on the ground at 573 K, 773 K, and 973 K (300 °C, 500 °C, and 700 °C). Moreover, the impurity diffusion coefficients of Bi in the liquid Sn were simultaneously measured, to confirm the suppression of natural convection. From the experimental results, natural convection was confirmed to be suppressed, given that the impurity diffusion coefficients of Bi were in good agreement with the microgravity reference data. Upon changing the amounts of added Bi within 5 at. pct Bi, the self-diffusion coefficients of liquid Sn did not vary significantly. Moreover, the SnBi system within 5 at. pct Bi can be regarded as a dilute solution by calculating the activity of Sn in the SnBi system beforehand. The self-diffusion coefficients of the liquid Sn were in good agreement with the power law of temperature dependence from the microgravity reference data. After confirming the suppression of natural convection and that the SnBi system is a dilute solution, the self-diffusion coefficient of liquid Sn was determined as 5.00 ± 0.16 × 10{sup −9} m{sup 2} s{sup −1} at 773 K (500 °C). The effectiveness of the experimental method used in this study for the measurement of the self-diffusion coefficients was confirmed, under the condition that the liquid system could be regarded as a dilute solution.

36 MATERIALS SCIENCE↗

Highly Selective Current-Induced Accumulation of Trace Ions at Micro-/NanoPorous Interfaces

During application of an electrical current through a composite micro-/nano-porous membrane, trace-ion accumulation in the microporous layer should vary greatly with the ion diffusion coefficient to allow selective accumulation of specific ions. In this study, we examine the theoretical enrichment factors in the microporous region as a function of current density and trace-ion diffusion coefficient to demonstrate the promise of such micro-/nano-porous interfaces for ion separations. Trace-ion accumulation relies on charged nanopores that exclude coions (ions with the same charge as the nanopore walls)and give rise (under current) to depletion of the dominant (high-concentration) salt in the region next to the nanopores. This depletion gives rise to high local electric fields. Trace ions accumulate in this region because convection carries them toward the nanoporous interface, whereas electromigration in the opposite direction is strongest next to the interface. For ions whose diffusion coefficients are half of the corresponding value for the dominant salt, calculated enrichment factors reach 150. In contrast depletion occurs for ions with the same diffusion coefficient as the dominant salt. Even higher enrichment factors appear for divalent ions due to their relatively low diffusion coefficients. Lastly, with monovalent coions whose diffusion coefficients differ by only 2%, calculated selectivity factors reach values >1.2 (>1.8 for divalent coions), depending on the magnitudes of the diffusion coefficients. Such selectivities may prove useful in separating very similar species such as isotopes or equally charged peptides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Pressure Transport Properties Of Fluids: Theory And Data From Levitated Drops At Combustion-Relevant Temperatures

Although the high pressure multicomponent fluid conservation equations have already been derived and approximately validated for binary mixtures by this PI, the validation of the multicomponent theory is hampered by the lack of existing mixing rules for property calculations. Classical gas dynamics theory can provide property mixing-rules at low pressures exclusively. While thermal conductivity and viscosity high-pressure mixing rules have been documented in the literature, there is no such equivalent for the diffusion coefficients and the thermal diffusion factors. The primary goal of this investigation is to extend the low pressure mixing rule theory to high pressures and validate the new theory with experimental data from levitated single drops. The two properties that will be addressed are the diffusion coefficients and the thermal diffusion factors. To validate/determine the property calculations, ground-based experiments from levitated drops are being conducted.

Bellan, Josette↗

PERPENDICULAR DIFFUSION OF COSMIC RAYS FOR A GOLDREICH-SRIDHAR SPECTRUM

Perpendicular diffusion coefficients and mean free paths of cosmic particles are computed for an anisotropic Alfvenic turbulence spectrum corresponding to the Goldreich-Sridhar model by employing an enhanced nonlinear guiding center theory. The calculations are important for understanding cosmic ray propagation in the Galaxy and in the solar system. In addition, the knowledge of diffusion coefficients is also useful for modeling charged particles which experience diffusive shock acceleration in supernova remnants and at interplanetary shock waves. To replace the parallel diffusion coefficient in our equation for the perpendicular diffusion coefficient, we employ different models such as quasilinear results and phenomenological models. The results are compared with those derived earlier. We demonstrate that the choice of the turbulence model as well as the choice of the model for the parallel diffusion coefficient has a strong influence on the perpendicular diffusion coefficient.

79 ASTRONOMY AND ASTROPHYSICS↗

Diffusion and mobility of atomic particles in a liquid

The diffusion coefficient of a test atom or molecule in a liquid is determined for the mechanism where the displacement of the test molecule results from the vibrations and motion of liquid molecules surrounding the test molecule and of the test particle itself. This leads to a random change in the coordinate of the test molecule, which eventually results in the diffusion motion of the test particle in space. Two models parameters of interaction of a particle and a liquid are used to find the activation energy of the diffusion process under consideration: the gas-kinetic cross section for scattering of test molecules in the parent gas and the Wigner–Seitz radius for test molecules. In the context of this approach, we have calculated the diffusion coefficient of atoms and molecules in water, where based on experimental data, we have constructed the dependence of the activation energy for the diffusion of test molecules in water on the interaction parameter and the temperature dependence for diffusion coefficient of atoms or molecules in water within the models considered. The statistically averaged difference of the activation energies for the diffusion coefficients of different test molecules in water that we have calculated based on each of the presented models does not exceed 10% of the diffusion coefficient itself. We have considered the diffusion of clusters in water and present the dependence of the diffusion coefficient on the cluster size. The accuracy of the presented formulas for the diffusion coefficient of atomic particles in water is estimated to be 50%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On collisional diffusion in a stochastic magnetic field

The effect of particle collisions on the transport in a stochastic magnetic field in tokamaks is investigated. The model of resonant magnetic perturbations generated by external coils at the plasma edge is used for the stochastic magnetic field. The particle collisions are simulated by a random walk process along the magnetic field lines and the jumps across the field lines at the collision instants. The dependencies of the local diffusion coefficients on the mean free path λ{sub mfp}, the diffusion coefficients of field lines D{sub FL}, and the collisional diffusion coefficients, χ{sub ⊥} are studied. Based on these numerical data and the heuristic arguments, the empirical formula, D{sub r}=χ{sub ⊥}+v{sub ||}D{sub FL}/(1+L{sub c}/λ{sub mfp}), for the local diffusion coefficient is proposed, where L{sub c} is the characteristic length of order of the connection length l{sub c}=πqR{sub 0}, q is the safety factor, R{sub 0} is the major radius. The formula quite well describes the results of numerical simulations. In the limiting cases, the formula describes the Rechester-Rosenbluth and Laval scalings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of the validity of quasilinear theory for electron Landau damping in a tokamak using a broad-band wave effect

The quasilinear diffusion coefficient assuming a constant magnetic field along the electron orbit is widely used to describe electron Landau damping of waves in a tokamak where the magnitude of the magnetic field varies on a flux surface. To understand the impact of violating the constant magnetic field assumption, we introduce the effect of a broad-bandwidth wave spectrum which has been used in the past to validate quasilinear theory for the fast decorrelation process between resonances. By the reevaluation of the diffusion coefficient through the level of the phase integral for the tokamak geometry with the broad-band wave effect included, we identify the three acceptable errors for the use of the quasilinear diffusion coefficient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coherent quantum transport in disordered systems: A unified polaron treatment of hopping and band-like transport

Quantum transport in disordered systems is studied using a polaron-based master equation. The polaron approach is capable of bridging the results from the coherent band-like transport regime governed by the Redfield equation to incoherent hopping transport in the classical regime. A non-monotonic dependence of the diffusion coefficient is observed both as a function of temperature and system-phonon coupling strength. In the band-like transport regime, the diffusion coefficient is shown to be linearly proportional to the system-phonon coupling strength and vanishes at zero coupling due to Anderson localization. In the opposite classical hopping regime, we correctly recover the dynamics described by the Fermi’s Golden Rule and establish that the scaling of the diffusion coefficient depends on the phonon bath relaxation time. In both the hopping and band-like transport regimes, it is demonstrated that at low temperature, the zero-point fluctuations of the bath lead to non-zero transport rates and hence a finite diffusion constant. Application to rubrene and other organic semiconductor materials shows a good agreement with experimental mobility data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Waste Acceptance Testing of Secondary Waste Forms: Cast Stone, Ceramicrete and DuraLith

To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions has initiated secondary-waste-form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is conducting tests on four candidate waste forms to evaluate their ability to meet potential waste acceptance criteria for immobilized secondary wastes that would be placed in the IDF. All three waste forms demonstrated compressive strengths above the minimum 3.45 MPa (500 psi) set as a target for cement-based waste forms. Further, none of the waste forms showed any significant degradation in compressive strength after undergoing thermal cycling (30 cycles in a 10 day period) between -40 C and 60 C or water immersion for 90 days. The three leach test methods are intended to measure the diffusion rates of contaminants from the waste forms. Results are reported in terms of diffusion coefficients and a leachability index (LI) calculated based on the diffusion coefficients. A smaller diffusion coefficient and a larger LI are desired. The NRC, in its Waste Form Technical Position (NRC 1991), provides recommendations and guidance regarding methods to demonstrate waste stability for land disposal of radioactive waste. Included is a recommendation to conduct leach tests using the ANS 16.1 method. The resulting leachability index (LI) should be greater than 6.0. For Hanford secondary wastes, the LI > 6.0 criterion applies to sodium leached from the waste form. For technetium and iodine, higher targets of LI > 9 for Tc and LI > 11 for iodine have been set based on early waste-disposal risk and performance assessment analyses. The results of these three leach tests conducted for a total time between 11days (ASTM C1308) to 90 days (ANS 16.1) showed: (1) Technetium diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that all the waste forms had leachability indices better than the target LI > 9 for technetium; (2) Rhenium diffusivity: Cast Stone 2M specimens, when tested using EPA 1315 protocol, had leachability indices better than the target LI > 9 for technetium based on rhenium as a surrogate for technetium. All other waste forms tested by ANSI/ANS 16.1, ASTM C1308, and EPA 1315 test methods had leachability indices that were below the target LI > 9 for Tc based on rhenium release. These studies indicated that use of Re(VII) as a surrogate for 99Tc(VII) in low temperature secondary waste forms containing reductants will provide overestimated diffusivity values for 99Tc. Therefore, it is not appropriate to use Re as a surrogate 99Tc in future low temperature waste form studies. (3) Iodine diffusivity: ANSI/ANS 16.1, ASTM C1308, and EPA 1315 tests indicated that the three waste forms had leachability indices that were below the target LI > 11 for iodine. Therefore, it may be necessary to use a more effective sequestering material than silver zeolite used in two of the waste forms (Ceramicrete and DuraLith); (4) Sodium diffusivity: All the waste form specimens tested by the three leach methods (ANSI/ANS 16.1, ASTM C1308, and EPA 1315) exceeded the target LI value of 6; (5) All three leach methods (ANS 16.1, ASTM C1308 and EPA 1315) provided similar 99Tc diffusivity values for both short-time transient diffusivity effects as well as long-term ({approx}90 days) steady diffusivity from each of the three tested waste forms (Cast Stone 2M, Ceramicrete and DuraLith). Therefore, any one of the three methods can be used to determine the contaminant diffusivities from a selected waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗