Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution line modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Toroidal wave frequency at L=6-10: AMPTE/CCE Observations and Comparison with Theoretical Model

Magnetospheric standing Alfven waves are guided along the ambient magnetic field and their frequency depends on the mass density of the plasma distributed along the field lines. These properties allow us to use Alfen waves to map time-dependent phenomena between space and ground and to estimate the mass density. In this paper we present a statistical study of the spatial variation of the fundamental frequency f(sub T1) of toroidal-mode standing Alfen waves in the L range from 6 to 10, where L indicates the maximum geocentric distance on the field line. The data used for this analysis are energetic particle flux anisotropy (proxy of transverse electric field) and magnetic field measurements from the Active Magnetospheric Particle Tracer Explorers Charge Composition Explorer (CCE) spacecraft. Using CCE data covering 4 years we obtained approximately 5000 20-min intervals containing a clear signature of toroidal waves. The median f(sub T1), is 6-10 mHz at L=7 and decreases to 4-8 mHz at L = . The frequency tends to be lower at noon than at midnight. The observed frequencies are compared with numerically derived frequencies using an empirical mass density model and a magnetic field model. We found a good agreement for 12-24 MLT but a large discrepancy near MLT= 3. This may indicate that the flux tubes at this local time are more heavily loaded than specified in the Gallagher et al. model.

Takahashi, Kazue↗
DOE OSTI2022

Comparison of spherical harmonics method and discrete ordinates method for radiative transfer in a turbulent jet flame

Here, in this study, we systematically compared the accuracy and computational cost of two popular solution methods for the radiative transfer equation (RTE): the spherical harmonics method (P N ) and the discrete ordinates method (DOM). We first investigated convergence characteristics of different orders of P N and DOM in a series of 1D homogeneous configurations with varying optical thicknesses. Both solvers perform better for optically thicker cases. The accuracy of P N methods increases with its order, , but the gain in accuracy reduces with the increase in , i.e., improvement of P 7 over P 5 is less than that of P 3 over P 1 . This decreasing trend becomes more prominent as the optical thickness decreases. On the other hand, DOM’s accuracy increases almost linearly with the increase in the number of ordinates (or polar angles in this study) in all cases. While comparing the directional profile of radiative intensity, both solvers perform better when the radiative intensity is more isotropic. These solvers were then connected with a full spectrum k-distribution (FSK) spectral model and used to perform radiation-coupled simulations of a turbulent jet flame in an axi-symmetric cylindrical domain. Results obtained from P 1 to P 7 approximations for P N , and 2 x 4, 4 x 4, 4 x 8, 8 x 8 finite angles for DOM are compared with that from an optically thin model, and a reference solution from line-by-line (LBL) photon Monte Carlo (PMC) method. The choice of radiation solver shows a noticeable impact on the temperature distribution of the flame. The P N solvers lead to slightly higher radiant fractions and the DOM solvers lead to slightly lower radiant fractions than the PMC benchmark solution. Finally, the computational costs of each of these solvers are also reported and an intermittent evaluation / time blending scheme to improve the computational efficiency of radiation solvers in radiation-coupled simulations are also demonstrated.

42 ENGINEERING↗
DOE OSTI2022

Mitigating the Impacts of Uncertain Geomagnetic Disturbances on Electric Grids: A Distributionally Robust Optimization Approach

Severe geomagnetic disturbances (GMDs) increase the magnitude of the electric field on the Earth’s surface (E-field) and drive geomagnetically-induced currents (GICs) along the transmission lines in electric grids. These additional currents can pose severe risks, such as current distortions, transformer saturation and increased reactive power losses, each of which can lead to system unreliability. Today several mitigation actions (e.g., changing grid topology) exist that can reduce the harmful GIC effects on the grids. Making such decisions can be challenging, however, because the magnitude and direction of the E-field are uncertain and non-stationary. In this paper, we model uncertain E-fields using the distributionally robust optimization (DRO) approach that determines optimal transmission grid operations such that the worst-case expectation of the system cost is minimized. We also capture the effect of GICs on the nonlinear AC power flow equations. For solution approaches, we develop an accelerated column-and-constraint generation (CCG) algorithm by exploiting a special structure of the support set of uncertain parameters representing the E-field. Extensive numerical experiments based on “epri-21” and “uiuc-150” systems, designed for GMD studies, demonstrate (i) the computational performance of the accelerated CCG algorithm, (ii) the superior performance of distributionally robust grid operations that satisfy nonlinear, nonconvex AC power flow equations and GIC constraints, in comparison with standard stochastic programming-based methods during the out-of-sample testing.

42 ENGINEERING↗
NASA NTRS2011

Forward Modeling of a Coronal Cavity

We apply a forward model of emission from a coronal cavity in an effort to determine the temperature and density distribution in the cavity. Coronal cavities are long, low-density structures located over filament neutral lines and are often seen as dark elliptical features at the solar limb in white light, EUV and X-rays. When these structures erupt they form the cavity portions of CMEs The model consists of a coronal streamer model with a tunnel-like cavity with elliptical cross-section and a Gaussian variation of height along the tunnel length. Temperature and density can be varied as a function of altitude both in the cavity and streamer. We apply this model to a cavity observed in Aug. 2007 by a wide array of instruments including Hinode/EIS, STEREO/EUVI and SOHO/EIT. Studies such as these will ultimately help us understand the the original structures which erupt to become CMEs and ICMES, one of the prime Solar Orbiter objectives.

Kucera, T. A.↗
NASA NTRS1994

Compression strength of composite primary structural components

The linear elastic response is determined for an internally pressurized, long circular cylindrical shell stiffened on the inside by a regular arrangement of identical stringers and identical rings. Periodicity of this configuration permits the analysis of a portion of the shell wall centered over a generic stringer-ring joint; i.e., a unit cell model. The stiffeners are modeled as discrete beams, and the stringer is assumed to have a symmetrical cross section and the ring an asymmetrical section. Asymmetery causes out-of-plane bending and torsion of the ring. Displacements are assumed as truncated double Fourier series plus simple terms in the axial coordinate to account for the closed and pressure vessel effect (a non-periodic effect). The interacting line loads between the stiffeners and the inside shell wall are Lagrange multipliers in the formulation, and they are also assumed as truncated Fourier series. Displacement continuity constraints between the stiffeners and shell along the contact lines are satisfied point-wise. Equilibrium is imposed by the principle of virtual work. A composite material crown panel from the fuselage of a large transport aircraft is the numerical example. The distributions of the interacting line loads, and the out-of-plane bending moment and torque in the ring, are strongly dependent on modeling the deformations due to transverse shear and cross-sectional warping of the ring in torsion. This paper contains the results from the semiannual report on research on 'Pressure Pillowing of an Orthogonally Stiffened Cylindrical Shell'. The results of the new work are illustrated in the included appendix.

Johnson, Eric R.↗
NASA NTRS1989

Nonthermal synchrotron radiation and pair annihilation in gamma-ray bursts

A self-consistent Monte Carlo simulation of quantized synchrotron emission, pair production, and pair annihilation in strong (2 x 10 to the 12th G or greater) magnetic fields is presented as a model of the production of annihilation lines in gamma-ray burst sources. The calculation determines the self-consistent photon spectrum and pair distribution functions resulting from a nonthermal injection of electrons into a region of homogeneous, strong magnetic field. The results indicate that the appearance of observable annihilation features in gamma-ray burst spectra requires isotropic or fan-beamed injection of electrons with energies of at least 5 MeV. The lines are narrow because higher energy electrons escape annihilation and do not contribute to Doppler-broadening. Injection beamed along the field did not produce observable annihilation lines in any of the cases studied. As a result, emission at energies much greater than 1 MeV produced through beaming seems to be incompatible with observable annihilation in this model. These results are discussed in relation to observed features in gamma-ray burst spectra.

Preece, Robert↗
NASA NTRS1991

Model dependence of velocities derived from coronal resonance lines

Intensity measurements of coronal resonance lines can be used to determine the outflow velocities of the scattering particles, provided the distribution of the densities, temperatures and velocities along the line of sight is known. A parameter study is designed and carried out to investigate the effect of surrounding denser regions with different temperatures and velocities on the velocity deduced from intensity measurements of the H I Lyman-alpha line in low density coronal holes.

Esser, Ruth↗
DOE OSTI2025

Cluster spin glass correlations and dynamics in Zn 0.5⁢ Mn 0.5⁢ Te

Here, we present a combined magnetometry, muon spin-relaxation (𝜇⁢SR), and neutron-scattering study of the insulating spin glass Zn 0.5 ⁢Mn 0.5 ⁢Te, for which magnetic Mn 2+ and nonmagnetic Zn 2+ ions are randomly distributed on a face-centered cubic lattice. The magnetometry and 𝜇⁢SR results confirm a spin freezing transition around 𝑇 𝑓 ≈ 23 K, with the spin-fluctuation rate decreasing gradually and somewhat inhomogeneously through the sample volume as the temperature decreases toward 𝑇 𝑓 . Characteristic spin-correlation times well above 𝑇 𝑓 are on the order of 10 −10 s, much slower than typically observed in canonical spin glasses but in line with expectations for a cluster spin glass. Using magnetic pair distribution function (mPDF) analysis and reverse Monte Carlo (RMC) modeling of the magnetic diffuse neutron-scattering data, we show that the spin-glass ground state consists of clusters of spins exhibiting short-range-ordered type-III antiferromagnetic correlations with a locally ordered moment of 3.1⁢(1)⁢𝜇 B between nearest-neighbor spins. The type-III correlations decay exponentially as a function of spin separation distance with a correlation length of approximately 5 Å. The diffuse magnetic scattering and corresponding mPDF show no significant changes across 𝑇 𝑓 , indicating that the dynamically fluctuating short-range spin correlations in the paramagnetic state retain the same basic type-III configuration that characterizes the spin-glass state; the only change apparent from the neutron-scattering data is a gradual reduction of the correlation length and locally ordered moment with increasing temperature. Taken together, these results paint a unique and detailed picture of the local magnetic structure and dynamics in Zn 0.5 ⁢Mn 0.5⁢ Te and provide strong evidence that this material is best described as a cluster spin glass. In addition, this work showcases a statistical method for extracting diffuse scattering signals from neutron powder diffraction data, which we developed to facilitate the mPDF and RMC analysis of the neutron data. This method has the potential to be broadly useful for neutron powder diffraction experiments on a variety of materials with short-range atomic or magnetic order.

magnetism↗
NASA NTRS1980

The distribution of maximum temperatures of coronal active region loops

The emission measure distribution across the range 4.5 log T 6.5 was derived for several coronal active regions by combining EUV line fluxes with broadband X-ray fluxes. The distributions of the maximum temperature was then derived using a numerical model. It is shown that the emission measure distribution can be represented over the full range 5.6 log Tm 6.5 by the superposition of simple loop models, if the models incorporate a substantial rise in their individual emission measure distributions near the maximum temperature. The unresolved loops may have substantial area ratios, since it is this ratio that fixes the extent of the rise in the emission measure distribution. Since the bulk of the emission measure is then contributed from the loop tops, the distribution of maximum temperatures has approximately the same shape as does the integrated emission measure distributions. The EUV and X-ray data used were obtained by from two separate experiments on ATM/Skylab.

Mayfield, E. B.↗
NASA NTRS1980

Numerical prediction of vortex cores of the leading and trailing edges of delta wings

The purpose of the present paper is to predict the roll-up of the vortex sheets emanating from the leading- and trailing-edges of delta wings with emphasis on the interaction of vortex cores beyond the trailing edge. The motivation behind the present work is the recent experimental data published by Hummel. The Nonlinear Discrete-Vortex method (NDV-method) is modified and extended to predict the leading- and trailing-vortex cores beyond the trailing edge. The present model alleviates the problems previously encountered in predicting satisfactory pressure distributions. This is accomplished by lumping the free-vortex lines during the iteration procedure. The leading- and trailing-edge cores and their feeding sheets are obtained as parts of the solution. The numerical results show that the NDV-method is successful in confirming the formation of a trailing-edge core with opposite circulation and opposite roll-up to those of the leading-edge core. This work is a breakthrough in the high angle of attack aerodynamics and moreover, it is the first numerical prediction done on this problem

Kandil, O. A.↗
NASA NTRS1981

A comparison of equatorial electron densities measured by whistlers and by a satellite radio technique

Magnetospheric equatorial electron densities determined from whistler observations are compared with in situ satellite measurements of electron density along near-equatorial orbits. Whistler data was recorded at Siple and Palmer, Antarctica, while the sweep frequency receiver on ISEE-1 was used to measure plasma densities during passes within about 15 deg of the whistler station longitudes at L values between 3 and 5.2. The whistler and satellite data sets are found to be in good agreement for the three rendezvous considered, suggesting that the diffusive equilibrium model applied to calculate electron densities from whistler measurements was appropriate for the description of electron density distributions along field lines in the outer plasmasphere. Data also indicate that density enhancements within the whistler ducts were not more than about 30% of the mean or interduct level, and that there were no significant east-west density gradients within about 15 deg of whistler station longitudes over the L range of the study.

Carpenter, D. L.↗
NASA NTRS1987

New lines of ethylene and a search for methylene in IRC + 10216

Seven new lines in the 10 micron nu7 band of C2H4 have been detected in the highly obscured carbon star IRC + 10216. The line intensities cannot be well described by a single rotational temperature, in contrast to the lines of CH4 and SiH4 previously observed in this source. There are at least three interpretations: the line intensities are variable on a time scale of months and years, C2H4 lines are formed over a region less homogeneous than that of CH4 and SiH4, or ethylene is somewhat nonthermally excited. Regardless, the line intensities indicate an average rotational temperature of 100 K and a column density of about 4 x 10 to the 15th/sq cm, which is approximately 2 x 10 to the -5th times the CO abundance. A search was also made for infrared transitions of CH2, the methylene radical. No lines were detected, but the observational limits are compared with the abundance and radial distribution for CH2 predicted by a model invoking the photodissociation of CH4.

Goldhaber, D. M.↗
NASA NTRS1987

The chromospheres and coronae of five G-K main-sequence stars

Previous data and high and low dispersion IUE observations of Chi 1 Ori, Alpha Cen A, Xi Boo A, Alpha Cen B, and Epsilon Eri are used to model the atmospheres of these stars from the high chromosphere to the corona. The energy lost by radiation and transferred by thermal conduction is investigated to establish the heating requirements, and results similar to those found for the solar atmosphere are found. The observed emission measurement distribution below 100,000 K can be described by a model in which Alfven wave energy input, observed through nonthermal line broadening, is balanced by radiation losses. Comparison of the coronal, transition region, and chromospheric pressures shows scaling relations which are compatible with previous flux correlations.

Jordan, C.↗
NASA NTRS1987

A free-wake rotor analysis including ground effect

The objective of this work is to develop a computer program which analytically estimates the wake geometry, vorticity, and velocity distribution over a rotor and in the neighboring airflow for a variety of conditions in and out of ground effect. The resulting wake is used to provide an assessment of the blade loading distribution for various hover and low speed flight conditions. The computer program is based on a lifting line free wake model and provides stable solutions for a variety of steady state conditions, including ground effect and forward flight. The wake program was validated by comparing the computed wake geometry and experimental test data for two different rotors.

Saberi, H. A.↗
NASA NTRS1990

Far-infrared, submillimeter, and millimeter spectroscopy of the Galactic center - Radio ARC and +20/+50 kilometer per second clouds

Results are presented from FIR, sub-mm, and mm spectroscopic observations of the radio arc and the +20/+50 km/s molecular clouds in the Galactic center. The results for the radio arc are analyzed, including the spatial distribution of C II forbidden line emission, the spatial distribution of CO emission, the luminosity and mass of C(+) regions, and the CO 7 - 6 emission and line profiles. Model calculations are used to study molecular gas in the radio arc. In addition, forbidden C II, CO 7 - 6, and C(O-18) mapping is presented for the +20/+50 km/x clouds. Consideration is given to the impact of the results on the interpretation of the physical conditions, excitation, and heating of the gas clouds in the arc and near the center.

Genzel, R.↗
NASA NTRS1974

Modal Interfaces in Hawaii

Hawaii, an archipelago where transportation distances are short but the interfaces are many, seeks elimination of modal changes by totally-submerged hydrofoil craft operating at the water surface directly between tourist resort destinations, by dual mode rapid transit vehicles operating directly between the deplaning bridges at Honolulu International Airport and hotel porte-cochere at Waikiki, by demand responsive vehicles for collection and distribution operating on fixed guideways for line haul, and by roll-on/roll-off inter-island ferries for all models of manually operated ground vehicles. The paper also describes facilitation of unavoidable interfaces by innovative sub-systems.

Wright, E. Alvey↗
NASA NTRS2002

Development of a Generic Creep-Fatigue Life Prediction Model

The objective of this research proposal is to further compile creep-fatigue data of steel alloys and superalloys used in military aircraft engines and/or rocket engines and to develop a statistical multivariate equation. The newly derived model will be a probabilistic fit to all the data compiled from various sources. Attempts will be made to procure the creep-fatigue data from NASA Glenn Research Center and other sources to further develop life prediction models for specific alloy groups. In a previous effort [1-3], a bank of creep-fatigue data has been compiled and tabulated under a range of known test parameters. These test parameters are called independent variables, namely; total strain range, strain rate, hold time, and temperature. The present research attempts to use these variables to develop a multivariate equation, which will be a probabilistic equation fitting a large database. The data predicted by the new model will be analyzed using the normal distribution fits, the closer the predicted lives are with the experimental lives (normal line 1 to 1 fit) the better the prediction. This will be evaluated in terms of a coefficient of correlation, R 2 as well. A multivariate equation developed earlier [3] has the following form, where S, R, T, and H have specific meaning discussed later.

Goswami, Tarun↗