Search NASA⌕ Search

SEARCH · Search NASA

Results for “documentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Soil Moisture Active Passive (SMAP) Mission Level 4 Surface and Root Zone Soil Moisture (L4_SM) Product Specification Document

This is the Product Specification Document (PSD) for Level 4 Surface and Root Zone Soil Moisture (L4_SM) data for the Science Data System (SDS) of the Soil Moisture Active Passive (SMAP) project. The L4_SM data product provides estimates of land surface conditions based on the assimilation of SMAP observations into a customized version of the NASA Goddard Earth Observing System, Version 5 (GEOS-5) land data assimilation system (LDAS). This document applies to any standard L4_SM data product generated by the SMAP Project.

Soil Moisture↗
NASA NTRS2020

Documenting Antarctic Alteration of Eucrites

When meteorites were discovered in Antarctica, it was anticipated that terrestrial alteration would be at a minimum because of their deepfreeze storage where chemical reaction rates would be low. However, early compositional and petrologic studies established the presence of terrestrial alteration phases (e.g., [1, 2]). These were especially prevalent in chondrites because metal and troilite are most susceptible to terrestrial alteration [3]. Howardites, eucrites and diogenites (HEDs) are less prone to alteration because they have low abundances of metal and troilite. Nevertheless, investigations of HED meteorites document a wide array of mineralogical, compositional and isotopic effects of terrestrial alteration (e.g., [4-8]). Studies of the mineralogical effects of alteration [4] were done with old scanning electron microscope (SEM) technology which could only image small regions at a time. The micro-context of alteration phases was revealed, but larger-scale context was difficult to establish. Here we demonstrate the utility of wholethin-section X-ray mapping of eucrites by modern SEMs to document large-scale distributions of alteration materials which serve to evaluate sample freshness, highlight regions for detail study, and facilitate testing a hypothesis for alteration of eucrites [8]

Mittlefehldt, D. W.↗
NASA NTRS2018

GTTC Future of Ground Testing Meta-Analysis of 20 Documents

National research, development, test, and evaluation ground testing capabilities in the United States are at risk. There is a lack of vision and consensus on what is and will be needed, contributing to a significant threat that ground test capabilities may not be able to meet the national security and industrial needs of the future. To support future decisions, the AIAA Ground Testing Technical Committee’s (GTTC) “Future of Ground Test” (FoGT) Working Group selected and reviewed 20 “seminal” documents related to the application and direction of ground testing. Each document was reviewed, with the content main points collected and organized into sections in the form of a gap analysis – current state, future state, major challenges/gaps, and recommendations. This paper includes key findings and selected commentary by an editing team.

Dunn, Steven C.↗
NASA NTRS2012

MODIS MOD21 Land Surface Temperature and Emissivity Algorithm Theoretical Basis Document

This document outlines the theory and methodology for generating the Moderate Resolution Imaging Spectroradiometer (MODIS) Level-2 daily daytime and nighttime 1-km land surface temperature (LST) and emissivity product using the Temperature Emissivity Separation (TES) algorithm. The MODIS-TES (MOD21_L2) product, will include the LST and emissivity for three MODIS thermal infrared (TIR) bands 29, 31, and 32, and will be generated for data from the NASA-EOS AM and PM platforms. This is version 1.0 of the ATBD and the goal is maintain a ‘living’ version of this document with changes made when necessary. The current standard baseline MODIS LST products (MOD11*) are derived from the generalized split-window (SW) algorithm (Wan and Dozier 1996), which produces a 1-km LST product and two classification-based emissivities for bands 31 and 32; and a physics-based day/night algorithm (Wan and Li 1997), which produces a 5-km (C4) and 6-km (C5) LST product and emissivity for seven MODIS bands: 20, 22, 23, 29, 31–33

Hughes, Christopher↗
NASA NTRS2021

Retrospectively Documenting Satisfaction of the Overarching Properties: An Exploratory Prototype

Software-intensive aviation systems are typically developed in accordance with recognized development process, safety analysis, and software development standards such as SAE ARP4754A, SAE ARP4761, and RTCA DO-178C. Efforts to streamline assurance processes and make them flexible enough to handle future assurance challenges have produced the Overarching Properties (OPs) for airworthiness approval. Each of the three OPs is a property systems must possess to be certifiable. There is no mandated means of documenting possession of the OPs. To explore possible means, we have prepared retrospective documentation showing that a specimen software system possesses the OPs. The specimen system, Safeguard, enforces geofencing restrictions on unmanned aerial vehicles. Our OP-possession case for its airborne component comprises eight arguments in the Goal Structuring Notation (GSN): a main argument for each OP and five cross-cutting auxiliary arguments. We present this argument as an example for discussion and further research, e.g., into means of assessing OP possession.

safety case↗
NASA NTRS2021

GEWEX (Global Energy and Water Exchanges Project): Surface Radiation Budget (SRB) Release 4 Integrated Product (IP4) - Algorithm Theoretical Basis Document and Evaluation

The World Climate Research Programme’s (WCRP) Global Energy and Water Exchanges (GEWEX) program is an integrated program of research, observations, and science activities with the mission to “Observe, understand and model the hydrological cycle and energy fluxes in the Earth’s atmosphere and at the surface.” Since the public release in 2010 of SRB Release 3, GEWEX reorganized to formulate the Data and Assessments Panel (GDAP) aimed at performing community assessments of the long-term global data products with focus on integrating various data products to address issues in the closing of the global energy and water cycles. SRB Release 4 Intergrated Product (Rel4-IP) integrates data products from the cloud, aerosol, atmosphere, ocean surface, and land surface projects within GDAP to produce a long-term time series of Top-of-Atmosphere (TOA) and surface radiative estimates. This Algorithm Theoretical Basis Document (ATBD) describes the various inputs, algorithms and resulting top-of-atmosphere and surface flux products that span from July 1983 through June 2017. Comparisons of the TOA flux products are made to overlapping CERES data products when possible. The surface radiative flux products are assessed relative to the globally distribution Baseline Surface Radiation Network measurements sites. Variability of the various products are compared to ERBE and CERES during overlapping time periods. The variability of the product show excellent correspondent to CERES during overlap years and improved statistical agreement with surface measurements. This document also discusses known issues with the data products to help the user understand the uncertainty and known issues.

Surface radiation budget↗
NASA NTRSDate not supplied

Documentation of Destructive Analyses on Thin Sections in the US Antarctic Meteorite Collection

Detailed studies and analytical measurements are commonly made using thin sections of rocks affixed with epoxy to a slide. Thin sections [1,2] are a convenient medium in which to study rocks and meteorites, and fit into sample holders compatible with many instruments. Thin sections can also be used multiple times by different researchers, and many meteorite thin sections from the US Antarctic meteorite collection, have been utilized by 5 to 6 researchers over their 40 year lifetime. Thin sections are thus a scientifically valuable resource that must be preserved, documented and conserved over time. Analytical capabilities for meteorite and other sample studies have progressed extensively in the last 20 years, including many different kinds of analysis of high spatial resolution on thin sections. The progression to analysis on small samples has provided new and efficient ways to characterize samples while also preserving more material for future generations to study. While the development of analytical tools has expanded, many of these analyses are destructive in the sense that small pits or holes or other effects of the analysis are created on the thin sections. Preserving material for future generations thus requires recording the effects of multiple analyses on thin sections. Here we describe the process used for documenting the effects of various analyses on thin sections in the US Antarctic meteorite collection.

thin section↗
NASA NTRS2016

The Man-machine Integration Design and Analysis System (MIDAS) Software Training Documentation

This document is a training manual for MIDAS v5 that takes an user through the hardware and software requirements for the MIDAS V5 software, the steps required to download the software, and the steps that a user needs to take to create a MIDAS simulation. The training guide also illustrates how the models interact to generate MIDAS predictions of operator performance along task, workload, and situation awareness timelines and provides the test routines that were conducted to verify the operation of the integrated MIDAS models. The training guide shows the user how the MIDAS task model interacts with and controls an anthropometric model through its use of behavioral primitives. The training documentation also illustrates one approach that has been used to filter and analyze MIDAS output.

Brian F. Gore↗
NASA NTRS2023

X-57 Cockpit Interface Control Document (ICD-CEPT-006)

The Cockpit Interface Control Document defines the hardware interfaces between the X-57 cockpit and subsystems. It provides locational and operational information in support of ground and flight operations with details on controls and displays that include Modes of Operation, Start-Up and Shut- Down Sequence diagrams and captures the current state of the MOD II Avionics Power Architecture. There is also preliminary information of the MOD III and MOD IV configurations. Microsoft PowerPoint was chosen for the document as early development required frequent meetings with multiple customers including aircraft operators (pilots), ground operations, support contractors and power, instrumentation, and human systems integration engineers and PowerPoint enabled presentations that could be quickly modified based on customer and developer interaction. One of the driving requirements for the cockpit design was to keep the left side panel as close the stock Tecnam panel as possible to reduce the failure risk of flight critical indicators. The original annunciator panel in the left side panel was modified to alert the pilot to failures in critical X-57 subsystems and an operator audio alert capability was added for these subsystems. Power-Up switches for the aircraft low voltage 13.8 VDC systems are located at the bottom of the left side panel and center panel, the same location as the stock Tecnam 13.8 VDC switches. The switches for energizing the high voltage system were located in the overhead panel to reduce the risk of inadvertently energizing the high voltage system during the low voltage power-up sequence. The Cruise Motor ARM switches were also located in the overhead panel and correspond to the same location as the stock Tecnam ignition switches. The stock Tecnam throttle levers and prop pitch levers were retained for the X-57. The throttle levers were renamed torque levers since they controlled the commanded torque to the cruise motors. The prop pitch levers provide a commanded RPM signal to an electronic prop pitch controller. X-57 specific displays, located in the right-side panel, are driven by dedicated sensors that monitor right and left side cruise motor RPM, right and left high voltage “Traction Bus” A and B (voltage, current and power) and the Avionics Bus DC converters (A and B) voltage and current. An X-57 Multi-Function Display (MFD) located in the center panel displays CAN Bus parameters. CAN Bus architecture is not certified for flight so these displays could not be used for safety critical information but were designed to be used for test point information only.

Laura Kushner↗
DOE OSTI2024

Requesting an Exemption from Standard Compliance: EPAct State and Alternative Fuel Provider Fleet Program Guidance Document

The U.S. Department of Energy established the Alternative Fuel Transportation Program (Program) and associated regulatory requirements pursuant to the Energy Policy Act of 1992. The Program, otherwise known as the State and Alternative Fuel Provider Fleet Program, requires covered state government and alternative fuel provider fleets operating under Standard Compliance to acquire alternative fuel vehicles (AFVs) as a specific percentage of their annual non-excluded light-duty vehicle acquisitions. The opportunity for covered fleets operating under Standard Compliance to request exemptions from their AFV-acquisition requirements serves as administrative relief in the unlikely event a fleet is unable to satisfy its requirements through the normally available compliance alternatives. These alternatives include the acquisition of light-duty AFVs, the acquisition of other, creditable vehicles (e.g., gasoline-fueled hybrid electric vehicles), making certain investments, the purchase of biodiesel for use in medium- or heavy-duty vehicles to the maximum extent allowed, and purchasing or trading for banked AFV credits. This document addresses requests for exemptions from the AFV-acquisition requirements to help covered fleets better understand: How to file a request for an exemption, information and documentation DOE needs to process an exemption request, and important policies relevant for filing exemption requests.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2026

ResStock Measure Documentation: Attic Floor Insulation

This report is part of a series describing different ResStock measures. "Measures" refers to energy efficiency retrofits that can be applied to buildings during modeling. This documentation covers the "Attic Floor Insulation" measure upgrade methodology and briefly discusses key results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2017

Documentation Resources on the ESIP Wiki

The ESIP community includes data providers and users that communicate with one another through datasets and metadata that describe them. Improving this communication depends on consistent high-quality metadata. The ESIP Documentation Cluster and the wiki play an important central role in facilitating this communication. We will describe and demonstrate sections of the wiki that provide information about metadata concept definitions, metadata recommendation, metadata dialects, and guidance pages. We will also describe and demonstrate the ISO Explorer, a tool that the community is developing to help metadata creators.

ESIP Documentation Cluster↗
DOE OSTI2025

Recommendations for developing, documenting, and distributing data products derived from NEON data

The National Ecological Observatory Network (NEON) provides over 180 distinct data products from 81 sites (47 terrestrial and 34 freshwater aquatic sites) within the United States and Puerto Rico. These data products include both field and remote sensing data collected using standardized protocols and sampling schema, with centralized quality assurance and quality control (QA/QC) provided by NEON staff. Such breadth of data creates opportunities for the research community to extend basic and applied research while also extending the impact and reach of NEON data through the creation of derived data products—higher level data products derived by the user community from NEON data. Derived data products are curated, documented, reproducibly-generated datasets created by applying various processing steps to one or more lower level data products—including interpolation, extrapolation, integration, statistical analysis, modeling, or transformations. Derived data products directly benefit the research community and increase the impact of NEON data by broadening the size and diversity of the user base, decreasing the time and effort needed for working with NEON data, providing primary research foci through the development via the derivation process, and helping users address multidisciplinary questions. Creating derived data products also promotes personal career advancement to those involved through publications, citations, and future grant proposals. However, the creation of derived data products is a nontrivial task. Here we provide an overview of the process of creating derived data products while outlining the advantages, challenges, and major considerations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Decision Support System to Compile Environmental Mitigations from Hydropower Licensing Documents

The process of deciphering, extracting, and compiling information from texts dense with domain-specific terminology and technical jargon is a challenging endeavor. It demands considerable expertise and deep knowledge in the respective field, resulting in a labor-intensive process when executed by humans. Furthermore, the task of identifying multiple class labels in extensive texts presents a challenge due to intra- and inter-reader variability, making the process time-consuming and costly.We’re introducing a user-friendly graphical interface, fortified with a BERT model-powered decision support system. This advanced system aims to augment efficiency, curtail data collection time, and sustain high precision in data acquisition. It is instrumental in deciphering and synthesizing intricate texts teeming with a spectrum of expressions, even within similar mitigation categories. Such tasks traditionally demand substantial human effort and specialized knowledge in the domain.Our system is specifically engineered for the task of extracting environmental mitigation information to promote sustainable hydropower development from licenses issued by the Federal Energy Regulatory Commission (FERC). These license documents are comprehensive, each containing over 15,000 words and requiring the identification of 135 different class labels. We anticipate that our system will boost reading speed, improve the consistency of classification outputs among readers, and contribute to the development of a robust scientific database of environmental mitigations associated with the 2,000+ non-federal hydropower facilities licensed by FERC in the United States.

Yoon, Hong-Jun [ORNL] (ORCID:0000000254505878)↗
DOE OSTI2025

Lost in OCR Translation? Vision-Based Approaches to Robust Document Retrieval

Code for ‘Lost in OCR Translation?’: robust document retrieval under degradation. Compares OCR-based, vision-only, and hybrid pipelines; includes SambaNova LLaMA Vision OCR, Nougat, and ViDoRe baselines. Provides QA data generation, RAG evaluation, and metrics (Levenshtein, nDCG@k, Recall@k, EM/F1) with reproducible scripts. Includes dataset guides

Bhattarai, Manish [Los Alamos National Labs]↗
DOE OSTI2024

End-Use Savings Shapes Measure Documentation: Advanced Rooftop Unit Control

This technical report documents the Advanced Rooftop Unit Control End Use Savings Shapes (EUSS) measure, including providing a description of the technology, modeling methods, and the energy savings calculated from applying the measure to applicable across the US commercial building stock using ComStock to quantify its potential. Advanced rooftop unit controls (ARC) generally consist of a supply fan VFD, and controls to implement demand controlled ventilation (DCV) and air-side economizing, as a retrofit to improve energy efficiency of existing rooftop units (RTUs).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

End-Use Savings Shapes Measure Documentation: Boiler Replacement with Air-Source Heat Pump Boiler and Electric Boiler Backup

Building on the successfully completed effort to calibrate and validate the U.S. Department of Energy's ResStock TM and ComStock TM models over the past three years, the objective of this work is to produce national data sets that empower analysts working for federal, state, utility, city, and manufacturer stakeholders to answer a broad range of analysis questions. The goal of this work is to develop energy efficiency, electrification, and demand flexibility end-use load shapes (electricity, gas, propane, or fuel oil) that cover a majority of the high-impact, market-ready (or nearly market-ready) measures. "Measures" refers to energy efficiency variables that can be applied to buildings during modeling. An end-use savings shape is the difference in energy consumption between a baseline building and a building with an energy efficiency, electrification, or demand flexibility measure applied. It results in a time-series profile that is broken down by end use and fuel (electricity or on-site gas, propane, or fuel oil use) at each timestep. ComStock is a highly granular, bottom-up model that uses multiple data sources, statistical sampling methods, and advanced building energy simulations to estimate the annual sub hourly energy consumption of the commercial building stock across the United States. The baseline model intends to represent the U.S. commercial building stock as it existed in 2018. The methodology and results of the baseline model are discussed in the final technical report of the End-Use Load Profiles project. This documentation focuses on a single end-use savings shape measure—boiler replacement by air-source heat pump boiler. This measure replaces space heating natural gas boilers by air-source heat pump boilers when applicable and helps quantify the decarbonization as well as the energy savings potential from the replacement. The measure resulted higher savings in natural gas consumption compared to the increase in electricity consumption, with a ratio of 2.9. The total natural gas energy consumption was reduced by 20%, whereas the total electricity consumption was increased by 2.5%.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗