Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dynamic response of a freely rotating butterfly valve in the advanced test reactor − dynamic coefficients modeling

Here, in evaluating the water hammer issue pertaining to the primary-coolant-regulating butterfly valve in the Advanced Test Reactor, the dynamic fluid body interaction (DFBI) approach was implemented in the analysis covered in Part I. Although DFBI modeling accurately and simultaneously solved the dynamic motion of the valve’s disk along with the flow field of the surrounding fluid, it shed little light on the reason behind such motion. For Part II, the reacting torque of the fluid on the disk was decomposed into representations of the dynamic coefficients in terms of stiffness, damping, and added mass. These were evaluated via simulations with steady-state static (stiffness), constant angular speed (damping), and variable angular speed (added mass) disks. Substituting the dynamic coefficients into Newton’s second law enabled the response trajectories to be obtained. Stable (by average) and unstable equilibrium positions and thrust tendencies of the valve were determined based on the stiffness coefficient (or static torque), the response amplitude was dampened or enlarged by the damping coefficient (minorly affected by added mass), and the response frequency was altered by the damping and added mass coefficients. Although the dynamic coefficient approach renders slightly different trajectories, due to the averaging effect of the torque in comparison to the DFBI method, the overall trend of the response aligns with the DFBI simulation, thus confirming the conclusion in Part I that a fix to the current butterfly valve is necessary.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Time Correlations from Steady-State Expectation Values

Recovering properties of correlation functions is typically challenging. On the one hand, experimentally, it requires measurements with a temporal resolution finer than the system’s dynamics. On the other hand, analytical or numerical analysis requires solving the system evolution. Here, we use recent results of quantum metrology with continuous measurements to derive general lower bounds on the relaxation and second-order correlation times that are both easy to calculate and measure. These bounds are based solely on steady-state expectation values and their derivatives with respect to a system parameter, and can be readily extended to the autocorrelation of arbitrary observables. We validate our method on two examples of critical quantum systems: a critical driven-dissipative resonator, where the bound matches analytical results for the dynamics, and the infinite-range Ising model, where only the steady state is solvable, and thus the bound provides information beyond the reach of existing analytical approaches. Our results can be applied to the experimental characterization of ultrafast systems and to the theoretical analysis of many-body models whose dynamics are hard to compute.

Górecki, Wojciech [INFN, Pavia] (ORCID:00000001991↗
DOE OSTI2026

Enhanced accuracy through ensembling of randomly initialized auto-regressive models for dynamical systems

Computational mechanics simulations using traditional finite element methods (FEM) require prohibitively expensive computational resources for real-time engineering applications, design optimization, and digital twin implementations. While machine learning (ML) surrogate models offer significant computational speedups, autoregressive ML models for time-dependent mechanical systems suffer from error accumulation that compromises long-term prediction reliability - a critical concern for engineering applications where accuracy over extended time horizons is essential for safety and performance assessments. Here, we propose a deep ensemble framework specifically designed to address this challenge in computational mechanics applications, where multiple ML surrogate models with random weight initializations are trained in parallel and their predictions aggregated during inference. This approach leverages statistical diversity to maximize information gain from a fixed set of training data and to mitigate error propagation, while maintaining the computational efficiency that makes ML surrogates attractive for engineering practice. We validate the framework on three representative problems spanning critical areas of computational mechanics: stress field evolution in heterogeneous microstructures under complex loading (relevant to advanced materials design and composite analysis), planetary-scale shallow water dynamics (applicable to environmental and geotechnical engineering), and Gray-Scott reaction-diffusion systems (relevant to mass transport and chemical process engineering). Across all test cases, the ensemble approach demonstrates consistent error reduction of 15-33% compared to individual models. The codes for this work are available on GitHub (https://github.com/Graham-Brady-Research-Group/AutoregressiveEnsemble_SpatioTemporal_Evolution).

autoregressive prediction↗
DOE OSTI2024

Machine learning-driven descriptions of protein dynamics at solid-liquid interfaces

This chapter has described how ML has enabled quantitative analysis of HS-AFM data to discover the physical phenomena governing protein dynamics and ordering at solid-liquid interfaces. The research detailed in this chapter modeled the rotation models of protein nanorods, the discovery of which would otherwise not be possible. By tracking the trajectories of individual protein rods from frame to frame, it was possible to model Brownian type motion and behaviors and Levy-flight dynamics that had not previously been shown. We also described the application of the Python package AtomAI, which has been developed specifically to analyze and extract physical phenomena, providing exemplar code for training an ensemble of deep neural networks to produce the semantic segmentation of AFM data and functions for encoding and decoding local environments. We last described a combinatorial approach to analyze very noisy data with a densely covered substrate where the emergence of order for the protein liquid crystals could be elucidated. By combining the methods from Case 1 and 2, it was possible to obtain the center of mass and angle for each rod in the images and track the assembly of the rods over time into a 2D liquid crystal array on the surface of mica.

protein dynamics, solid-liquid interfaces, atomic ↗
DOE OSTI2026

Historical and Future Global Irrigation Energy Consumption by Fuel and Region

Irrigation energy use is a significant component of agricultural production costs, contributing directly to the energy and emissions intensity of crop production and ultimately to food prices. Understanding the existing structure of irrigation energy consumption help achieve food-energy-water security and environmental goals. We present a comprehensive global data set detailing country-level irrigation energy consumption, emphasizing the comparative use of electric, diesel, and emerging solar pumps. To our knowledge, no such data set exists. We draw from a literature review to develop a logistic transformed regression model to estimate the shares of fuel sources for irrigation across countries over historical years to construct a global data set of country-level irrigation energy consumption by multiple fuel sources. Additionally, we compare our estimates of irrigation energy use with agricultural energy use as reported by the International Energy Agency and other external sources. We then use this data to project future irrigation energy use with the Global Change Analysis Model, which is a multisector dynamics model, to showcase the usage of this data set. Projections under the reference scenario show a global shift in fuel types for irrigation pumping, while patterns vary across regions, with India and Pakistan leading in solar-powered irrigation growth and countries like the USA and China continuing to rely primarily on grid electricity. This data set provides a resource to understand the role of irrigation fuel choices within the broader energy sector, as well as the connected agricultural, land use, and water sectors under alternative future scenarios, enabling informed decision making toward efficient agricultural practices.

Global Change Analysis Model (GCAM)↗
DOE OSTI2024

Machine tool cross beam design, fabrication, and testing using metal big area additive manufacturing

This paper describes the application of metal Big Area Additive Manufacturing (mBAAM) to the fabrication of a machine tool cross beam. The replacement of a traditional box design weldment with a new design printed by wire arc additive manufacturing using the MedUSA system at Oak Ridge National Laboratory (ORNL) is detailed. This requires a new design strategy based on the unique mBAAM capabilities. The intent of the new design is to reduce mass, while maintaining the dynamic stiffness. To compare the two designs, the natural frequencies and mode shapes are measured using impact testing and predicted using finite element analysis. It is confirmed that the printed structure dynamics agreed with the numerical model predictions, which demonstrates that it is feasible to model a large-scale mBAAM part and understand its behavior prior to printing. Another notable outcome of this study is that the significant residual stress and distortion in the print indicate that knowledge gaps remain for widespread implementation of mBAAM.

42 ENGINEERING↗
DOE OSTI2024

Implementation and (Inverse Modified) Error Analysis for Implicitly Templated ODE-Nets

We focus on learning unknown dynamics from data using ODE-nets templated on implicit numerical initial value problem solvers. First, we perform inverse modified error analysis of the ODE-nets using unrolled implicit schemes for ease of interpretation. It is shown that training an ODE-net using an unrolled implicit scheme returns a close approximation of an inverse modified differential equation (IMDE). In addition, we establish a theoretical basis for hyperparameter selection when training such ODE-nets, whereas current strategies usually treat numerical integration of ODE-nets as a black box. We thus formulate an adaptive algorithm which monitors the level of error and adapts the number of (unrolled) implicit solution iterations during the training process, so that the error of the unrolled approximation is less than the current learning loss. This helps accelerate training while maintaining accuracy. Several numerical experiments are performed to demonstrate the advantages of the proposed algorithm compared to nonadaptive unrollings and validate the theoretical analysis. Here, we also note that this approach naturally allows for incorporating partially known physical terms in the equations, giving rise to what is termed “gray box” identification.

ODE-nets↗
DOE OSTI2025

Scalable edge clustering of dynamic graphs via weighted line graphs

Timestamped relational datasets consisting of records (or connections) between pairs of entities are ubiquitous in network science. For applications like peer-to-peer communication, email, various social network interactions, and computer network security, it is useful to organize these records into groups based on how and when they are occurring. Weighted line graphs offer a natural way to model how records are related in such datasets but for large real-world graph topologies, building and utilizing the line graph is prohibitively expensive. Here, we present the framework to cluster the edges of a dynamic graph via the associated line graph that contains two major contributions. The first is a method to work with the line graph implicitly and the second is a distributed scale implementation of an agglomerative hierarchical graph clustering algorithm. We outline a novel hierarchical dynamic graph edge clustering approach that efficiently breaks massive relational datasets into small sets of edges containing events at various timescales. This is in stark contrast to traditional graph clustering algorithms that prioritize highly connected (clique-like) community structures. Our approach relies on constructing a sufficient subgraph of a weighted line graph and applying a hierarchical agglomerative clustering. This approach is related to scalable techniques from spatial clustering, nonlinear-dimension reduction, topological data analysis, and draws particular inspiration from HDBSCAN. As an edge clustering, this method yields an overlapping node clustering. Our algorithm is parallelizable and we demonstrate efficient clustering of a billion-scale, real-world dynamic graph into small edge sets that correlate in topology and time. The entire clustering process for a graph with tens of billions of edges takes just a few minutes of run time on 256 nodes of a distributed compute environment. We argue how the output of the edge clustering is useful for a multitude of data visualization and powerful machine learning tasks, both involving the original massive dynamic graph data and metadata associated with the nodes and edges. Finally, we describe how this approach can be extended to dynamic hypergraphs and dynamic graphs/hypergraphs with unstructured data living on vertices and edges.

Data Analysis↗
DOE OSTI2025

Coherent diffraction imaging in the undergraduate laboratory

We present an undergraduate optics instructional laboratory designed to teach skills relevant to a broad range of modern scientific and technical careers. In this laboratory project, students image a custom aperture using coherent diffraction imaging, while learning principles and skills related to digital image processing and computational imaging, including multidimensional Fourier analysis, iterative phase retrieval, noise reduction, finite dynamic range, and sampling considerations. After briefly reviewing these imaging principles, we describe the required experimental materials and setup for this project. Our experimental apparatus is both inexpensive and portable, and a software application we developed for interactive data analysis is freely available.

Porter, J. Nicholas↗
DOE OSTI2026

Tuning Shinkarev’s Bicycle: Separating the Parallel Cycles of Photosystem II Using Empirical Wavelet Transform

The oxygen-evolving complex (OEC) of Photosystem II (PSII) catalyzes light-driven water oxidation, a process necessary to sustain Earth’s atmospheric oxygen. Oxygen yields measured during single-turnover flash sequences exhibit period-four oscillations, which form the basis of the Joliot–Kok (S-state) model. However, when the oscillations of other processes contribute to the measured oxygen yield, fitting methods can conflate these signals and distort estimates of inefficiencies and initial S-state populations. To address this, we applied the empirical wavelet transform (EWT) as a model-independent method to separate overlapping oscillators and capture damping dynamics that are not well represented in Fourier analysis. We tested this framework on polarographic flash-oxygen traces from both our Synechocystis sp. PCC 6803 thylakoid membrane preparations and archival datasets on Chlorella and isolated chloroplasts. EWT consistently resolves the expected period-four component alongside a distinct binary oscillation. Simulations suggest that fitting this isolated period-four signal recovers VZAD parameters more accurately than analysis of raw traces, yielding different estimates for S-state distributions and transition probabilities. Notably, this binary oscillation aligns closely with semiquinone dynamics predicted solely from period-four fit parameters. These findings indicate that EWT can effectively distinguish complex signals in oxygen evolution, offering a framework potentially applicable to other spectroscopic probes of the S-state cycle.

Ferrari, Nicholas [Louisiana State Univ., Baton Ro↗
DOE OSTI2025

Evaluating User Errors and Temporal Trends in Marine Fish Communities Using 360-Degree Underwater Photography

The use of environmental DNA (eDNA) sampling has been proposed as a complementary method to monitor fish species in marine environments, offering a non-invasive and potentially more efficient approach to marine species observations. eDNA monitoring could be especially useful in and around sites targeted for marine energy generation as these regions need regular monitoring that would be impractical with traditional techniques. Before we can fully rely upon eDNA, we must first verify its accuracy against other proven methods, such as the use of underwater photography. In this study, I deployed a 360-degree camera in the tidal channel of Sequim Bay once a month during several hours overlapping slack tide. I investigated how having multiple people identify and count fish on underwater images could affect the overall results. Using chi square tests in R, I compared my fish identifications and counts to those made by another intern on the same images recorded in August. I found significant differences in the number of species identified and the total individual counts between the two different datasets. I also tested the statistical differences in both Shannon diversity and Pielou evenness indices between the August, September, and November camera deployments using a Hutcheson t-test. Only one significant difference was found in the Shannon index comparisons, and none were found between the Pielou evenness comparisons. These findings show that if multiple identifiers are used to process underwater images, quality control checks must be made to reduce the potential for error. This also points toward the possibility to leverage more advanced image analysis processes, such as automated image analysis software. The findings from this study also show that the dynamics of marine fish communities can vary over a few months; however, further analysis is needed to determine the extent of the seasonal changes in Sequim Bay.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Summary of Pilot Project State Technical Assistance on Multi-Sector Analysis for Electric and Petroleum Fuels

The Oregon Energy Security Plan, (ODOE 2024) published in September 2024, builds a strong case for the state to give acute attention to the fuel supply chain. In December 2024, Pacific Northwest National Laboratory (PNNL) in partnership with Oregon Department of Energy (ODOE), announced a pilot project to conduct an analysis that synthesizes current and projected transportation fuel dynamics, supply chain risks, and risk comparators with relevant sectors, such as transportation electrification, sponsored by the Department of Energy’s (DOE) Office of Cybersecurity, Energy Security, and Emergency Response (CESER). The study, is intended to leverage existing modeling and frameworks from a recent 2024 sector coupling analysis supported by the DOEs Office of Electricity (OE) (B. Mitra, S. Pal, et al., Coupling of the Electricity and Transportation Sectors - Part I: Sector Overviews 2024) (B. Mitra, S. Pal and J. Reeve, et al. 2024). While the PNNL team set out to conduct a quantitative risk analysis driven by detailed data that synthesizes current and projected transportation fuel dynamics, supply chain risks, and risk comparators with relevant sectors. The intention was to provide an approach that could be extendable to other parts of the country. They encountered data limitations and adjusted their approach accordingly. This report summarizes PNNL's original plan for executing the study, including limitations for obtaining data requirements for fuel flows and interim products, as well as a risk matrix that can be used to identify supply chain risks.

02 PETROLEUM↗
DOE OSTI2025

Acceleration of the particle-in-cell code Osiris with graphics processing units

Fully relativistic particle-in-cell (PIC) simulations are crucial for advancing our knowledge of plasma physics. Modern supercomputers based on graphics processing units (GPUs) offer the potential to perform PIC simulations of unprecedented scale, but require robust and feature-rich codes that can fully leverage their computational resources. In this work, this demand is addressed by adding GPU acceleration to the PIC code Osiris. An overview of the algorithm, which features a CUDA extension to the underlying Fortran architecture, is given. Detailed performance benchmarks for thermal plasmas are presented, which demonstrate excellent weak scaling on NERSC's Perlmutter supercomputer and high levels of absolute performance. The robustness of the code to model a variety of physical systems is demonstrated via simulations of Weibel filamentation and laser-wakefield acceleration run with dynamic load balancing. Finally, measurements and analysis of energy consumption are provided that indicate that the GPU algorithm is up to ~14 times faster and ~7 times more energy efficient than the optimized CPU algorithm on a node-to-node basis. The described development addresses the PIC simulation community's computational demands both by contributing a robust and performant GPU-accelerated PIC code and by providing insight into efficient use of GPU hardware.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Self-Assembled Oligomers Facilitate Amino Acid-Driven CO 2 Capture at the Air–Aqueous Interface

Direct air capture of CO 2 using amino acid absorbents, such as glycine or sarcosine, is constrained by the relatively slow mass transfer of CO 2 through the air–aqueous interface. Our recent study showed a marked improvement in CO 2 capture by introducing CO 2 -permeable oligo-dimethylsiloxane (ODMS-MIM + ) oligomers with cationic (imidazolium, MIM + ) headgroups. Here, in this work, we have employed all-atom molecular dynamics simulations in combination with subensemble analysis using network theory to provide a detailed molecular picture of the behavior of CO 2 and the glycinate anions (Gly – ) at the ODMS-MIM + decorated air–aqueous interfaces. We show that the cationic head groups of the surfactants enhance the concentration and lifetime of Gly – in the interfacial region, while ODMS tails promote the physisorption of CO 2 in the interfacial region. Together, these two factors increase the effective region of contact and the probability of interactions between CO 2 and Gly – compared to that of the pure air–aqueous interface. The fundamental insights gained in this work establish essential foundations for developing hybrid systems with oligomer-decorated interfaces to maximize the overall CO 2 capture rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

NH 3 -Mediated Reactive Capture and Conversion: Integrating CO 2 Absorption from Flue Gas with CO Production via NH 4 HCO 3 Electrolysis

Efficient carbon capture and utilization require strategies that minimize energy penalties of CO 2 regeneration and compression. Reactive capture and conversion (RCC) address this challenge by integrating capture with direct electrochemical conversion. Here, we show an NH3-mediated tandem RCC system that couples capture of CO 2 from simulated flue gas (10% v/v CO 2 in N 2 ) with electroreduction of NH 4 HCO 3 to CO over a Ni single-atom catalyst (Ni-SAC). Speciation modeling and capture experiments revealed that a deep CO 2 capture with C/N ratio of 0.65 was achieved using 2.5 M NH 3 from simulated flue gas. Electrolysis of the resulting NH 4 HCO 3 on the Ni- SAC delivered an 85% CO Faradaic efficiency at 100 mA/cm 2 with excellent tolerance to NH 3 /NH 4 + as confirmed by DFT calculations and ab initio molecular dynamics (AIMD) simulations. Further, the technoeconomic analysis established a levelized total cost of CO manufacturing of $25.43/kmol, gauging the practical viability. Overall, this study holds great potential to decarbonize the chemical manufacturing industry while reducing synthetic production costs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Discovering the Multisectoral Impacts of Global Energy Sector Outcomes Through Multiple Ensemble Aggregation Measures

Understanding complex human-Earth system interactions often involves analyzing large scenario ensembles that encompass a wide range of plausible futures. These ensembles often require aggregation to summarize information based on specific criteria or conditions. However, previous research using global change scenario ensembles has largely overlooked how the choice of aggregation method influences the interpretation of results. To address this gap, we leverage a large ensemble data set designed to capture broad energy system dynamics generated using the Global Change Analysis Model. We first explore how energy-related uncertainties are propagated to both global and regional water-energy-food sectors. We then conduct a rank correlation analysis across seven ensemble aggregation measures and demonstrate the need to consider multiple measures in global change scenarios. Our results suggest that global water and food sector outcomes in the 21st century vary widely depending on different scenario assumptions. The global energy productivity is projected to improve by the end of the century across all scenarios. Moreover, regions facing water scarcity challenges in 2100 do not always overlap with those facing extreme energy and food sector outcomes. Although rank correlations across seven aggregation measures are relatively stable across sectors, we identify cases where relying on a single measure leads to losing critical information in the full ensemble. Reliance on a single aggregation measure can distort the interpretation of global change scenario outcomes. Instead, adopting multiple ensemble aggregation measures provides a more holistic understanding of global change scenario ensembles.

Kim, Gijoo↗
DOE OSTI2025

Spatially explicit terrestrial carbon densities for calibrating the carbon cycle in human-Earth system Models

Soil and vegetation carbon stocks play a critical role in human-Earth system models. These stocks (denominated as densities in MgC/ha) affect variables such as land use change emissions and also influence land use change pathways under climate forcing scenarios where terrestrial carbon is assigned a carbon price. Here we present reharmonized soil and vegetation carbon densities both at the 5-arcmin resolution grid cell level and also aggregated to 235 water sheds for 4 land use types (Cropland, Grazed land, Urban land and unmanaged vegetation) and 15 unmanaged land cover types. Moreover, we use the distribution of carbon within and across pixels to define statistical "states" of carbon, once again differentiated by land type. These statistical states are used to define a range of possible carbon values that can be used for defining initial conditions of soil and vegetation carbon in human-Earth system models. We implement these data in a state-of-the-art multi sector dynamics model, namely the Global Change Analysis Model (GCAM), and show that these new data improve several land use responses, especially when terrestrial carbon is assigned a carbon price.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Development of Whole System Digital Twins for Advanced Reactors: Leveraging Graph Neural Networks and SAM Simulations

Here, in this work, we introduce a novel method to develop whole system digital twins (DTs) for advanced nuclear reactors. This method treats a complex reactor system as a heterogeneous graph: with the system components as different types of graph nodes and their physical interconnections as edges. Based on the heterogeneous graph, a graph neural network combining graph convolution and temporal node attention is developed as the DT, facilitating a comprehensive understanding of the system's dynamic behavior. By utilizing the System Analysis Module (SAM) code for simulating various operational transients, we develop a graph-based database that trains the DT. This DT is characterized by two primary functions: It can infer the entire system's status using sparse node information, and it can predict the progress of transients based on current and historical system information. Our approach is validated through case studies on the Experimental Breeder Reactor II (EBR-II) system and a generic Fluoride-salt-cooled High-temperature Reactor (gFHR), demonstrating the DT's accuracy in forecasting operational transients. The DT's rapid computation capabilities enhance its potential for supporting advanced reactor operations, offering benefits in intelligent simulation, autonomous control, and anomaly detection, paving the way for improved safety analysis and intelligent component health management for advanced reactor systems and reducing their operations and maintenance cost.

EBR-II↗