Search NASA⌕ Search

SEARCH · Search NASA

Results for “electric heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Crystal Structure and Atomic Vacancy Optimized Thermoelectric Properties in Gadolinium Selenides

Thermoelectric materials enable the energy conversion of waste heat into electricity, helpful to relieve global energy crisis. Here, we report a systematic investigation on high-temperature thermoelectric gadolinium selenides, cubic Gd 3-x Se 4 (x = 0.16, 0.21 and 0.25) and orthorhombic Gd 2 Se 3-y (y = 0.02, 0.06 and 0.08). High energy synchrotron x-ray diffraction and total scattering have been used to investigate the crystallographic and local structures. Atomic-scale clusters of Gd vacancy in the cubic phase are observed by employing the reverse Monte Carlo simulation. For cubic Gd 3-x Se 4 , adjusting Gd vacancy triggers the effect of multiple conduction bands, confirmed by the increase in effective masses and theoretical calculations. A reasonable peak zT value of 0.27 is achieved at 850 K for Gd 3-x Se 4 (x = 0.16). On the other hand, tuning Se vacancy enables the optimization of electron concentration for the orthorhombic Gd 2 Se 3-y . More significantly, its low deformation potential (Ξ = 12eV) gives rise to enhanced electron mobility and higher peak zT value of 0.54 at 850 K for Gd 2 Se 3-y (y = 0.02). Intriguingly, a higher zT of 1.2 at 1200 K is reasonably predicted by quality factor analysis. Finally, this work extends the scope of high-temperature thermoelectric materials and facilitates the exploration of novel high-temperature thermoelectric materials

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal Evolution of Internal Strain in Doped PbTe

Recent improvements in the efficiency of heat-to-electricity energy conversion in lead chalcogenide thermoelectrics involve reducing the thermal conductivity by incorporating large amounts of internal strain. The extent to which typical lead chalcogenide processing techniques (such as doping, ball milling, and densification) increase internal strain and dislocation density must be quantified to improve materials design. In this study, neutron powder diffraction is leveraged to evaluate the internal strain introduced by ball milling in doped and undoped powders. Doping with Na and/or Eu increases internal strain beyond ball milling alone, with the greatest increase from combining the two dopants. Strain recovery occurs in each powder above 400 K but can be suppressed by co-doping, indicating a strong dopant–dislocation interaction in this system. Therefore, high-temperature processing of PbTe powders should be avoided if high internal strain is desired. Low-temperature densification and/or rapid pressing techniques may be key to maintaining internal strain in the final pressed pellet. The diffraction peak asymmetry and correlated elastic softening measured in pressed PbTe pellets in past studies were not observed in the precursor powders measured here, suggesting that measurements of the Debye temperature on final pressed pellets are required to examine the influence of defect-induced elastic softening on thermal conductivity. This work provides key guidance for defect engineering to maximize internal strain and thermoelectric performance in PbTe thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cost and Life-Cycle Greenhouse Gas Implications of Integrating Biogas Upgrading and Carbon Capture Technologies in Cellulosic Biorefineries

We discuss gaseous streams in biorefineries that have been undervalued and underutilized. In cellulosic biorefineries, coproduced biogas is assumed to be combusted alongside lignin to generate process heat and electricity. Biogas can instead be upgraded to compressed biomethane and used as a transportation fuel. Capturing CO 2 -rich streams generated in biorefineries can also contribute to greenhouse gas (GHG) mitigation goals. We explore the economic and life-cycle GHG impacts of biogas upgrading and CO 2 capture and storage (CCS) at ionic liquid-based cellulosic ethanol biorefineries using biomass sorghum. Without policy incentives, biorefineries with biogas upgrading systems can achieve a comparable minimum ethanol selling price (MESP) and reduced GHG footprint ($1.38/liter gasoline equivalent (LGE) and 12.9 gCO 2e /MJ) relative to facilities that combust biogas onsite ($1.34/LGE and 24.3 gCO 2e /MJ). Incorporating renewable identification number (RIN) values advantages facilities that upgrade biogas relative to other options (MESP of $0.72/LGE). Incorporating CCS increases the MESP but dramatically decreases the GHG footprint (-21.3 gCO 2e /MJ for partial, -110.7 gCO 2e /MJ for full CCS). The addition of CCS also decreases the cost of carbon mitigation to as low as $52-$78/t CO 2 , depending on the assumed fuel selling price, and is the lowest-cost option if both RIN and California's Low Carbon Fuel Standard credits are incorporated.

09 BIOMASS FUELS↗
DOE OSTI2025

The Effect of Hydrothermal Alteration and Microcracks on Hydraulic Properties and Poroelastic Deformation: A Case Study of the Blue Mountain Geothermal Field

Abstract Geothermal energy plays a vital role in decarbonizing electricity and heat supply. Effective utilization of geothermal resources hinges on identifying or generating permeable reservoir zones and understanding how effective pressure variations affect fluid circulation and reservoir properties by poroelastic deformation. Hydrothermal alteration can modify the petrophysical properties of geothermal reservoir rocks, which may increase or decrease its productivity. Understanding these alteration effects is essential to predict and optimize long‐term sustainable geothermal operations. Here, we investigate the impact of hydrothermal alteration on poroelastic and hydraulic properties of diverse lithologies in a series of deformation tests performed at several confining (0–80 MPa) and pore pressure (10–30 MPa) levels. Experimental results of hydrothermally altered dikes and phyllites obtained from the Blue Mountain geothermal field (Nevada, USA) are compared to thermally cracked La Peyratte granite (France) and correlated with petrophysical properties, mineral composition, and microstructures. Argillic alteration of dikes increases porosity and storage capacity but lowers thermal conductivity and increases pore compressibility. Conversely, silicate precipitation in phyllites increases stiffness and thermal conductivity but also reduces porosity and permeability. Experimentally determined effective pressure coefficients range from 0.1 to 0.9, differ for permeability and volumetric strain and decrease with increasing effective pressure. The presence of compliant microcracks and crack‐like pores significantly increases the stress sensitivity of La Peyratte granite and silicified phyllites. This study demonstrates how thermal and chemical alteration impacts poromechanical and petrophysical characteristics of geothermal targets, which ultimately govern reservoir stability and subsidence, induced seismicity as well as fluid and heat extraction efficiency during geothermal operations.

Schuster, Valerian [Helmholtz Centre Potsdam GFZ G↗
DOE OSTI2020

In-situ resonant band engineering of solution-processed semiconductors generates high performance n-type thermoelectric nano-inks

Thermoelectric devices possess enormous potential to reshape the global energy landscape by converting waste heat into electricity, yet their commercial implementation has been limited by their high cost to output power ratio. No single “champion” thermoelectric material exists due to a broad range of material-dependent thermal and electrical property optimization challenges. While the advent of nanostructuring provided a general design paradigm for reducing material thermal conductivities, there exists no analogous strategy for homogeneous, precise doping of materials. Here, we demonstrate a nanoscale interface-engineering approach that harnesses the large chemically accessible surface areas of nanomaterials to yield massive, finely-controlled, and stable changes in the Seebeck coefficient, switching a poor nonconventional p- type thermoelectric material, tellurium, into a robust n -type material exhibiting stable properties over months of testing. These remodeled, n -type nanowires display extremely high power factors (~500 µW m -1 K -2 ) that are orders of magnitude higher than their bulk p -type counterparts.

42 ENGINEERING↗
DOE OSTI2021

Observation of nuclear-spin Seebeck effect

Thermoelectric effects have been applied to power generators and temperature sensors that convert waste heat into electricity. The effects, however, have been limited to electrons to occur, and inevitably disappear at low temperatures due to electronic entropy quenching. Here, we report thermoelectric generation caused by nuclear spins in a solid: nuclear-spin Seebeck effect. The sample is a magnetically ordered material MnCO 3 having a large nuclear spin ( I = 5/2) of 55 Mn nuclei and strong hyperfine coupling, with a Pt contact. In the system, we observe low-temperature thermoelectric signals down to 100 mK due to nuclear-spin excitation. Our theoretical calculation in which interfacial Korringa process is taken into consideration quantitatively reproduces the results. The nuclear thermoelectric effect demonstrated here offers a way for exploring thermoelectric science and technologies at ultralow temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

High entropy powering green energy: hydrogen, batteries, electronics, and catalysis

A reformation in energy is underway to replace fossil fuels with renewable sources, driven by the development of new, robust, and multi-functional materials. High-entropy materials (HEMs) have emerged as promising candidates for various green energy applications, having unusual chemistries that give rise to remarkable functionalities. This review examines recent innovations in HEMs, focusing on hydrogen generation/storage, fuel cells, batteries, semiconductors/electronics, and catalysis—where HEMs have demonstrated the ability to outperform state-of-the-art materials. We present new master plots that illustrate the superior performance of HEMs compared to conventional systems for hydrogen generation/storage and heat-to-electricity conversion. We highlight the role of computational methods, such as density functional theory and machine learning, in accelerating the discovery and optimization of HEMs. The review also presents current challenges and proposes future directions for the field. We emphasize the need for continued integration of modeling, data, and experiments to investigate and leverage the underlying mechanisms of the HEMs that are powering progress in sustainable energy.

batteries↗
DOE OSTI2021

Bright and stable light-emitting diodes made with perovskite nanocrystals stabilized in metal–organic frameworks

Perovskite nanocrystals are exceptional candidates for light-emitting diodes (LEDs). However, they are unstable in the solid film and tend to degrade back to the bulk phase, which undermines their potential for LEDs. Here we demonstrate that perovskite nanocrystals stabilized in metal–organic framework (MOF) thin films make bright and stable LEDs. The perovskite nanocrystals in MOF thin films can maintain the photoluminescence and electroluminescence against continuous ultraviolet irradiation, heat and electrical stress. As revealed by optical and X-ray spectroscopy, the strong emission originates from localized carrier recombination. Bright LEDs made from perovskite-MOF nanocrystals are demonstrated with a maximum external quantum efficiency of over 15% and a high brightness of over 10 5 cd m -2 after the device reaches stabilization. During LED operation, the nanocrystals can be well preserved, free of ion migration or crystal merging through protection by the MOF matrix, leading to a stable performance over 50 hours.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Scalable, low-cost ink-based processing of high-performance silver selenide thermoelectrics

The growing global energy demand and its accelerating contribution to climate change emphasize the urgent need for sustainable energy conversion/harvesting technologies. Thermoelectric (TE) devices offer a compelling route to directly convert waste heat into electricity and enable solid-state cooling without moving parts or harmful refrigerants. Achieving their full potential requires not only higher TE performance (zT) but also scalable, low-cost manufacturing processes. Here, we introduce a transformative ink-based processing approach for scalable manufacturing of high-performance silver selenide-based TE materials and devices. Using a simple, high-throughput ink-mixing and blade coating strategy, our Ag 2 Se-based materials under the optimized composition and processing conditions yield an ultrahigh room-temperature power factor of 2.8 mW m −1 K −2 , over 100% higher than baseline samples and a reproducible figure of merit zT of 1 at room temperature. A thermoelectric generator (TEG) achieves a very competitive power density of 112 mW cm −2 at a 90 °C temperature difference between the hot and cold sides of the device, which is among the highest reported for silver selenide-based TE devices to date. This facile, scalable ink-based processing establishes a practical pathway toward industrial-scale manufacturing and widespread adoption of thermoelectric devices, advancing sustainable energy technologies.

Bappy, Md. Omarsany [University of Notre Dame, IN ↗
DOE OSTI2022

Development of an operando characterization stage for multi-modal synchrotron x-ray experiments

It is widely accepted that micro- and nanoscale inhomogeneities govern the performance of many thin-film solar cell absorbers. These inhomogeneities yield material properties (e.g., composition, structure, and charge collection) that are challenging to correlate across length scales and measurement modalities. The challenge is compounded if a correlation is sought during device operation or in conditions that mimic aging under particular stressors (e.g., heat and electrical bias). Correlative approaches, particularly those based on synchrotron x-ray sources, are powerful since they can access several material properties in different modes (e.g., fluorescence, diffraction, and absorption) with minimal sample preparation. Small-scale laboratory x-ray instruments have begun to offer multi-modality but are typically limited by low x-ray photon flux, low spatial resolution, or specific sample sizes. To overcome these limitations, a characterization stage was developed to enable multi-scale, multi-modal operando measurements of industrially relevant photovoltaic devices. The stage offers compatibility across synchrotron x-ray facilities, enabling correlation between nanoscale x-ray fluorescence microscopy, microscale x-ray diffraction microscopy, and x-ray beam induced current microscopy, among others. Furthermore, the stage can accommodate device sizes up to 25 × 25 mm 2 , offering access to multiple regions of interest and increasing the statistical significance of correlated properties. The stage materials can sustain humid and non-oxidizing atmospheres, and temperature ranges encountered by photovoltaic devices in operational environments (e.g., from 25 to 100 °C). As a case study, we discuss the functionality of the stage by studying Se-alloyed CdTe photovoltaic devices aged in the stage between 25 and 100 °C.

14 SOLAR ENERGY↗
DOE OSTI2024

First-principles calculation of lattice distortion, electronic structure, and bonding properties of GeTe-based and PbSe-based high-entropy chalcogenides

The massive amount of wasted heat energy from industry has pushed the development of thermoelectric (TE) materials that directly convert heat into electricity to a new level of concern. Recently, multicomponent alloys such as GeTe-based and PbSe-based high-entropy (HE) chalcogenides have attracted a great deal of attention due to their potential application as TE materials. The nature of the interatomic bonding, lattice distortion (LD), and the electronic structure in this class of materials is not fully understood. Herein, we report a comprehensive computational investigation of nine GeTe-based HE alloys with eight metallic elements (Ag, Pb, Sb, Bi, Cu, Cd, Mn, and Sn) with large supercells of 1080 atoms each; seven PbSe-based HE solid solutions: Pb0.99−ySb0.012SnySe1−2xTexSx (x = 0.1, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, with y = 0) with supercells of 1000 atoms each; and five Pb0.99−ySb0.012SnySe1−2xTexSx (y = 0.05, 0.1, 0.15, 0.2, 0.25 with x = 0.25) solid solutions with supercells of 1000 atoms each. All these HE models are theoretically investigated for the first time. The electronic structure, interatomic bonding, charge transfer, and lattice distortion (LD) are investigated by first-principles calculations based on density functional theory. Multicomponent HE alloys can cause a significant LD, which affects their mechanical, thermal, and TE properties. The calculations for the GeTe-based HE chalcogenides showed that they are semiconductors with a narrow bandgap, except for m8, which has a semi-metallic characteristic, and this makes them good candidates for TE applications. For most of these models, the Fermi level shifts upward and locates deeply in the conduction bands, resulting in the enhancement of the electrical conductivity (σ). The bonding properties showed that most bonds in m5 are more dispersed, indicating highest LD and lower lattice thermal conductivity. For PbSe-based HE solid solutions, the LD calculations showed that the models Pb0.99Sb0.012Se0.5Te0.25S0.25 and Pb0.89Sb0.012Sn0.1Se0.5Te0.25S0.25 have the higher LD, and thus a lower lattice thermal conductivity. Such investigations are in high demand since it enables us to design new HE chalcogenides for TE applications. We use the novel concept of total bond order density as a single quantum mechanical metric to characterize the internal cohesion of these HE alloys and correlate with calculated properties, especially the mechanical properties. This work provides a solid database for HE chalcogenides and a road map for many potential applications. Moreover, the computational procedure we developed can be used to design new HE chalcogenides for specific TE applications.

Physics↗
DOE OSTI2020

Scale-free, programmable design of morphable chain loops of kilobots and colloidal motors

Micron-scale robots require systems that can morph into arbitrary target configurations controlled by external agents such as heat, light, electricity, and chemical environment. Achieving this behavior using conventional approaches is challenging because the available materials at these scales are not programmable like their macroscopic counterparts. To overcome this challenge, we propose a design strategy to make a robotic machine that is both programmable and compatible with colloidal-scale physics. Our strategy uses motors in the form of active colloidal particles that constantly propel forward. We sequence these motors end-to-end in a closed chain forming a two-dimensional loop that folds under its mechanical constraints. We encode the target loop shape and its motion by regulating six design parameters, each scale-invariant and achievable at the colloidal scale. We demonstrate the plausibility of our design strategy using centimeter-scale robots called kilobots . We use Brownian dynamics simulation to explore the large design space beyond that possible with kilobots, and present an analytical theory to aid the design process. Multiple loops can also be fused together to achieve several complex shapes and robotic behaviors, demonstrated by folding a letter shape “M,” a dynamic gripper , and a dynamic pacman . The material-agnostic, scale-free, and programmable nature of our design enables building a variety of reconfigurable and autonomous robots at both colloidal scales and macroscales.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Highly Available Nuclear Power for Mission-Critical Applications

Some energy consumers require power on an anytime, all-year-round basis with a high level of certainty, including defense installations, isolated communities, and some industrial processes. For these customers, interruptions in electricity or heat can mean substantial financial loss or even loss of life. In the absence of grid-scale energy storage, a high level of power availability can be accomplished only through the robustness and redundancy of power generators. The NuScale small modular reactor design is well suited to provide highly available power because of several features related to both the nuclear steam supply system and the overall plant design. In analogy to Redundant Array of Independent Disks (RAID) systems used to provide highly reliable data storage, a NuScale plant can assure sustained power generation by virtue of its Redundant Array of Integral Reactors (RAIR).This paper describes the NuScale RAIR plant features and summarizes the results of a rigorous analysis of RAIR availability as a function of power or, conversely, the RAIR plant output power as a function of power availability. The analysis utilized the Matrix Laboratory code (MATLAB) and included probability distributions for the frequency and duration of module outages due to planned and unplanned events. Further, the study evaluated the impact of implementing turbine bypass rather than module shutdown and using one or more modules to supply house loads in the case of loss of off-site power (LOOP). Availability results are presented for a 12-module RAIR plant with and without turbine bypass enabled during a LOOP and for different possible connections to the off-site power distribution grid and dedicated service loads. Results indicate that a very high level of availability can be achieved at relatively high power output levels, regardless of turbine bypass and dedicated load connection, compared to the operating fleet.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Simulations of the fault current limiting operation of a long-length REBCO CORC ® superconducting cable cooled by helium gas

Conductor-on-round-core (CORC®) cables composed of rare-earth-barium-copper-oxide high-temperature superconducting (HTS) tapes are of great interest for power transmission applications due to their many advantages such as high power density, light weight, and low loss. Closed circulation loops of cryogenic helium gas can be used to cool HTS cables down to low temperatures to significantly improve their current-carrying capacity. Coupled circuit-electromagnetic-thermal finite element simulations implemented in the COMSOL Multiphysics package were developed, validated, and then used for simulating the fault current limiting (FCL) performance and the cooling processes of an 8-layer CORC® cable cooled with a flow of cryogenic helium gas. In the simulations, the temperature dependence of the electrical and thermal properties of all component materials is implemented for improved accuracy. To overcome computational challenges caused by the considerable difference in geometrical scales (i.e. few-µm-thick HTS layers versus 10 m-long HTS cable), the model is divided into two separate simulations. The first simulation is performed on the transverse cross-section of the cable to calculate the electric field, heating power and temperature rise in each component of a CORC® cable during FCL operation. The heating power calculated in the first simulation is transferred to the second model to simulate the cooling of a 10 m-long cable after the fault is cleared. The effect of the helium gas flow rate on the cooling process is also investigated to develop strategic approaches for optimizing cooling systems for HTS cables with FCL capability. The simulations indicated that a 40 ms fault with a voltage drop of 20 V m −1 along the cable can result in a temperature increase from 60 K to about 165 K inside the cable, and it takes about 500 s to cool the cable back to nearly 60 K with a flow of cold helium gas at a rate of 5 g s −1 .

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Uncertainty in determining carbon dioxide removal potential of biochar

A quantitative and systematic assessment of uncertainty in life-cycle assessment is critical to informing sustainable development of carbon dioxide removal (CDR) technologies. Biochar is the most commonly sold form of CDR to date and it can be used in applications ranging from concrete to agricultural soil amendments. Previous analyses of biochar rely on modeled or estimated life-cycle data and suggest a cradle-to-gate range of 0.20–1.3 kg CO 2 net removal per kg of biomass feedstock, with the range reported driven by differences in energy consumption, pyrolysis temperature, and feedstock sourcing. Herein, we quantify the distribution of CDR possible for biochar production with a compositional life-cycle inventory model paired with scenario-aware Monte Carlo simulation in a 'best practice' (incorporating lower transportation distances, high pyrolysis temperatures, high energy efficiency, recapture of energy for drying and pyrolysis energy requirements, and co-generation of heat and electricity) and 'poor practice' (higher transportation distances, lower pyrolysis temperatures, low energy efficiency, natural gas for energy requirements, and no energy recovery) scenarios. In the best-practice scenario, cradle-to-gate CDR (which is representative of the upper limit of removal across the entire life cycle) is highly certain, with a median removal of 1.4 kg of CO 2 e/kg biomass and results in net removal across the entire distribution. In contrast, the poor-practice scenario results in median net emissions of 0.090 kg CO 2 e/kg biomass. Whether this scenario emits (66% likelihood) or removes (34% likelihood) carbon dioxide is highly uncertain. The emission intensity of energy inputs to the pyrolysis process and whether the bio-oil co-product is used as a chemical feedstock or combusted are critical factors impacting the net carbon dioxide emissions of biochar production, together responsible for 98% of the difference between the best- and poor-practice scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Unraveling the Origin of Glassy Thermal Transport in Medium-Entropy Semiconductors: From Nanoscale Phase Segregation to Atomic-Scale Lattice Distortion

Thermoelectric (TE) materials can directly and reversibly convert heat into electricity, offering a promising pathway for reshaping the global energy landscape. The performance of thermoelectric materials is evaluated using the figure of merit, zT = S 2 σT/κ, which can be optimized by improving Seebeck coefficient (S) and electrical conductivity (σ) while suppressing the thermal conductivity (κ) at the operating temperature (T). Here, we introduce a medium-entropy metal chalcogenide that exhibits phonon-glass electron-crystal behavior. The conventional perspective hypothesizes that the suppression of thermal transport arises solely from disordered atomic occupation, which enhances alloy scattering mechanisms for phonon transport. However, emerging evidence suggests the presence of structural and chemical inhomogeneity at multiple length scales in entropy-engineered materials, a phenomenon that has rarely been investigated in detail.

Liu, Yukun [Northwestern Univ]↗
DOE OSTI2025

Structural transition and possible pressure-induced superconductivity in a suboxide La 5 Pb 3 O

Here, in this study, we report a structural phase transition and its interplay with superconductivity in the suboxide La 5⁢ Pb 3 ⁢O. Upon cooling through 𝑇 𝑡 = 225K, La 5⁢ Pb 3⁢ O transforms from a high-temperature 𝐼⁢4/mcm to a low-temperature 𝑃⁢4/ncc structure in which La-Pb dimerization along the 𝑐 axis occurs. This transition is accompanied by anomalies in the temperature dependence of electrical resistivity and specific heat. High-pressure electrical transport measurements reveal that hydrostatic pressure suppresses the structural transition and possibly induces superconductivity with a maximum superconducting temperature of 10 K. Density functional theory calculations show minimal changes in the electronic density of states and no gap opening at 𝐸 𝐹 across 𝑇 𝑡 , suggesting that the transition is driven by bonding effects rather than Fermi surface instability. These findings establish La 5⁢ Pb 3 ⁢O as a promising platform for exploring the interplay between weak structural transitions and superconductivity.

Yan, Jiaqiang [Oak Ridge National Laboratory (ORNL↗