Search NASA⌕ Search

SEARCH · Search NASA

Results for “fission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Using X-ray spectrum imaging to quantify fission gas in high-burnup UO2 fuel

Analysis of fission gas bubbles (FGBs) in light-water reactor (LWR) fuel is needed to improve the understanding and predictive capability of fuel evolution under normal- and transient conditions. One of the most important parameters of a FGB is the pressure of the gas, primarily Xe, inside it. Bubble volume and location (inter- vs. intragranular) are important considerations as well. However, experimental analysis of such bubbles is challenging due to their small size and embedded nature, and usefulness of the data requires large numbers be analyzed. This paper proposes a method to measure the pressure of Xe bubbles using X-ray spectrum imaging (XSI) in scanning transmission electron microscopy (STEM). From X-ray generation and instrumental parameters, the number of Xe atoms yielding a given number of Xe L-series X-ray counts is estimated, and then from the estimated volume of the bubble the Xe density is estimated, which can then be converted to pressure via an equation-of-state. We apply the method to XSI datasets from high burnup (HBu) fuel from North Anna 1 reactor in as-irradiated and post-LOCA-test conditions and find Xe pressures in the FGBs clustered around 1 GPa.

Parish, Chad [ORNL] (ORCID:0000000312097439)↗
DOE OSTI2024

Computational Discovery of Intermolecular Singlet Fission Materials Using Many-Body Perturbation Theory

Intermolecular singlet fission (SF) is the conversion of a photogenerated singlet exciton into two triplet excitons residing on different molecules. SF has the potential to enhance the conversion efficiency of solar cells by harvesting two charge carriers from one high-energy photon, whose surplus energy would otherwise be lost to heat. The development of commercial SF-augmented modules is hindered by the limited selection of molecular crystals that exhibit intermolecular SF in the solid state. Computational exploration may accelerate the discovery of new SF materials. The GW approximation and Bethe–Salpeter equation (GW+BSE) within the framework of many-body perturbation theory is the current state-of-the-art method for calculating the excited-state properties of molecular crystals with periodic boundary conditions. In this Review, we discuss the usage of GW+BSE to assess candidate SF materials as well as its combination with low-cost physical or machine learned models in materials discovery workflows. We demonstrate three successful strategies for the discovery of new SF materials: (i) functionalization of known materials to tune their properties, (ii) finding potential polymorphs with improved crystal packing, and (iii) exploring new classes of materials. In addition, three new candidate SF materials are proposed here, which have not been published previously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Elucidating Quintet-State Dynamics in Singlet Fission Oligomers and Polymers with Tetracene Pendants

To unlock the potential of molecular engineering for practical quantum sensing and computing, it is essential to create and control pure magnetic states in molecular systems. Singlet fission (SF) in organic materials offers a promising approach by generating pairs of triplet excited states from photoexcited singlets. Here, in this work, we investigate SF in a polymer with strategically positioned tetracene pendant groups along a polynorbornene backbone and its oligomeric counterparts, facilitating intrapolymer through-space coupling. Using continuous-wave and pulsed time-resolved electron paramagnetic resonance (EPR) spectroscopy, we elucidate the spin dynamics and identify key intermediates, including the quintet state, that emerge during SF. Our findings reveal that exciton translational motion along the pendant groups enhances the dissociation of triplet pairs, with oligomer length playing a critical role in modulating spin state interconversion and exciton transport. Our results provide key insights into the SF mechanism in polymeric materials and highlight the role of oligomer length in modulating spin state interconversion and exciton transport. This work advances our understanding of SF in polymers, paving the way for their application in quantum information science and energy conversion technologies.

Bindra, Jasleen K. [Argonne National Laboratory (A↗
DOE OSTI2026

Bridge Connectivity Dictates Spin Interactions and Triplet Pair Dynamics in Intramolecular Singlet Fission

Electron spin plays a critical role in determining the structure, dynamics, and reactivities of molecular excited states, including multiexciton processes such as singlet fission. These systems exhibit triplet pair states whose excited state dynamics can be widely tuned through molecular engineering. For example, the electronic coupling between covalently linked chromophores can be readily modulated using chemical bridges to control proximity, quantum interference, or resonance effects. However, less is known about how spin coupling interactions are impacted by chromophore architecture, and how this influences triplet pair recombination dynamics. Here, in this study, we investigate the role of bridge connectivity and chromophore identity in modulating interchromophore exchange and dipolar coupling interactions for a series of pentacene and tetracene dimers bridged by alternant hydrocarbons (phenylene, naphthalene, anthracene). Using both time-resolved electron paramagnetic resonance and transient absorption spectroscopy, we find that the boundedness and recombination pathways of the triplet pair spins are highly sensitive to molecular architecture and chromophore-specific magnetic dipolar interactions. Notably, nominally ferromagnetic and antiferromagnetic eigenstates result in distinct spin state orderings, consistent with predictions from quantum interference-based graphical models. These findings establish new design principles for tuning spin dynamics in iSF materials, with implications for photonic and quantum information applications.

He, Guiying [City Univ. of New York (CUNY), NY (Un↗
DOE OSTI2025

Spatio-spectral optical fission in time-varying subwavelength layers

Transparent conducting oxides are highly doped semiconductors that exhibit favourable optical features compared with metals, including reduced material losses, tuneable electronic and optical properties, and enhanced damage thresholds. Recently, the photonic community has renewed its attention towards these materials, recognizing their remarkable nonlinear optical properties in the near-infrared spectrum. The exceptionally large and ultrafast change in the refractive index, which can be optically induced in these compounds, extends beyond the boundaries of conventional perturbative analysis and makes this class of materials the closest approximation to a time-varying system. Here we report the spatio-spectral fission of an ultrafast pulse trespassing a thin film of aluminium zinc oxide with a non-stationary refractive index. By applying phase conservation to this time-varying layer, our model can account for both space and time refraction and explain, in quantitative terms, the spatial separation of both spectrum and energy. Our findings represent an example of extreme nonlinear phenomena on subwavelength propagation distances, which provides new insights into transparent conducting oxides’ transient optical properties. This can be critical for the ongoing research on photonic time crystals, on-chip generation of non-classical states of light, integrated optical neural networks, ultrafast beam steering and frequency-division multiplexing.

integrated optics↗
DOE OSTI2024

Interplay of coulomb and exciton–phonon coupling controls singlet fission dynamics in two pentacene polymorphs

Pentacene is an important model organic semiconductor in both the singlet exciton fission (SF) and organic electronics communities. We have investigated the effect of changing crystal structure on the SF process, generating multiple triplet excitons from an initial singlet exciton, and subsequent triplet recombination. Unlike for similar organic semiconductors that have strong SF sensitive to polymorphism, we find almost no quantitative difference between the kinetics of triplet pair (TT) formation in the two dominant polymorphs of pentacene. Both pairwise dimer coupling and momentum-space crystal models predict much faster TT formation from the bright singlet excited state of the Bulk vs ThinFilm polymorph, contrasting with the experiment. GW and Bethe–Salpeter equation calculations, including exciton–phonon coupling, reveal that ultrafast phonon-driven transitions in the ThinFilm polymorph compensate the intrinsically slower purely Coulomb-mediated TT formation channel, rationalizing the similarity in observed rates. Taking into account the influence of subtle structural distinctions on both the direct and phonon-mediated SF pathways reveals a predictive capability to these methods, expected to be applicable to a wide variety of molecular crystals.

14 SOLAR ENERGY↗
DOE OSTI2025

Use of Constrained Gamma Emission Computed Tomography to Evaluate Fission Product Distributions in High-Temperature Materials from a TRISO Fuel Irradiation

An image reconstruction technique was developed to overcome problems with earlier methods of gamma emission computed tomography of graphite rings surrounding the AGR-3/4 TRISO fission product transport experiment. The profiles obtained from the tomography are compared with sampling done via radially resolved destructive sampling techniques. Generally, there is good agreement between profiles measured via destructive sampling of the rings and the tomographic profiles, though at low signal strengths, the tomographic profiles appear elevated.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Excited levels in odd-A silver isotopes populated rn fission of {sup 252}Cf

Excited levels in 111−121 Ag , odd-𝐴 isotopes populated following spontaneous fission of 252 Cf have been studied using high-fold 𝛾 coincidences measured with Gammasphere array of Compton-suppressed Ge spectrometers at Argonne National Laboratory. The experimental information on these nuclei reported before has been corrected and extended. In the work we discuss the evolution of triaxiality in odd-Ag nuclei. Relative positions of the 𝜋⁢𝑝1/2 and 𝜋⁢𝑔9/2 shells defining the 𝑍=40 gap when approaching the 𝑁=82 closure, the 𝜋⁢1/2+⁢[431] intruder bands, the three-quasiparticle configurations, and the so called 𝑗−1 anomaly in odd-Ag nuclei are also discussed.

Urban, W.↗
DOE OSTI2025

All Particle In Fission Reactor - Energy Deposition

This product includes software developed by Members of the Geant4 Collaboration (http://cern.ch/geant4). The basic principle of ALFRED consists of a k-eigenvalue module in which all generated particles are tracked and all deposited energy is accounted for. An eigenvalue module updates the neutron source after each run based on the neutrons emitted at each fission in the previous run. As a result, the source distribution converges to the fundamental mode of the steady-state eigenvalue problem of the associated critical reactor. ALFRED leverages the High Precision neutron transport package.

Ferney, PaulA. [Idaho National Laboratory (INL), I↗
DOE OSTI2025

Comparison of nested geometry treatments within GPU-based Monte Carlo neutron transport simulations of fission reactors

Monte Carlo (MC) neutron transport provides detailed estimates of radiological quantities within fission reactors. This involves tracking individual neutrons through a computational geometry. CPU-based MC codes use multiple polymorphic tracker types with different tracking algorithms to exploit the repeated configurations of reactors, but virtual function calls have high overhead on the GPU. The Shift MC code was modified to support GPU-based tracking with three strategies: dynamic polymorphism with virtual functions, static polymorphism, and a single tracker type with tree-based acceleration. On the Frontier supercomputer these methods achieve 77.8%, 91.2%, and 83.4%, respectively, of the tracking rate obtained using a specialized tracker optimized for rectilinear-grid-based reactors. This indicates that all three methods are suitable for typical reactor problems in which tracking does not dominate runtime. The flexibility of the single tracker method is highlighted with a hexagonal-grid microreactor problem, performed without hexagonal-grid-specific tracking routines, providing a 2.19× speedup over CPU execution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Complete Development of Critical Capabilities for TRISO Fission Product Source Term Calculations and Quantify Mechanisms for Pd Penetration of SiC

Overall fission product (FP) release will be an important consideration for the licensing and deployment of advanced reactors utilizing tristructural isotropic (TRISO) fuels. This work focuses on enhancing and applying the BISON models needed to predict FP transport within TRISO particles and particle failure probability, both of which factor directly into release predictions. Specifically, this report details (1) the development of the models needed to predict palladium (Pd) conservation at the engineering scale and the application of those models to characterize Pd fluxes for input into a mechanistic multiscale model for Pd penetration; (2) the refinement of sorption mass transfer models and the development of models for trapping in porous layers, which were applied and compared to particle scans from AGR-2 to provide proof of concept for a method of particle-scale validation that may reduce uncertainties compared to compact-scale validation using data from integral effects tests; (3) the development of a failure-statistics-informed, mesh-independent methodology for applying smeared cracking, enabling further study of the localized multiphysics behaviors associated with cascading particle failure mechanisms; and (4) the preliminary characterization of those coupled multiphysics particle failure behaviors using smeared, nonretentive diffusivities to provide a baseline for future study and to guide ongoing engineering applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Measurements of the 238 U/ 235 U and 239 Pu/ 235 U Fission Cross-Section Ratios Using Monoenergetic Neutron Beams

A quasi-monoenergetic neutron beam was used to measure the neutron-induced fission cross-section ratios for 238 U(n,f)/ 235 U(n,f) (Table 1) and 239 Pu(n,f)/ 235 U(n,f) (Table 2). These results are plotted in comparison with data from the fissionTPC and ENDF/B-VIII.0 in Figs.1-3. For each cross section ratio, the total, systematic, and statistical uncertainties are listed, along with the total beamtime required.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Extension of Clad Damage Propagation Model for Fission Gas Dispersal and Two-Phase Flow Effects in MOOSE SubChannel Module

This report presents an extension of the Clad Damage Propagation (CDAP) model implemented in the MOOSE SubChannel Module (SCM) to capture post-failure fission-gas dispersal and two-phase flow effects in sodium-cooled fast reactor assemblies. The extended model tracks discharged gas axially and radially, computes channel-averaged flow quality and void fraction using a Lockhart–Martinelli framework, evaluates two-phase frictional pressure-drop multipliers, determines inlet mass-flow degradation under fixed core pressures, and applies an intensified-void-based heat-transfer degradation to affected fuel pins. Radial plume expansion is parameterized using mineral-oil jet experiments mapped to sodium conditions via Reynolds–Weber similarity. Implementation details are documented, along with the new methods and user inputs needed to control plume mapping and two-phase behavior. Demonstration simulations for 19- and 37-pin bundles show that breach size and inlet velocity strongly influence propagation potential: small breaches (≤0.5 mm) produce limited degradation while larger breaches (~1 mm) can drive oscillatory temperature spikes and enhanced failure propagation, especially at higher velocities. These results demonstrate that the extended CDAP model provides a more complete framework for quantifying cladding damage propagation and evaluating propagation potential in transient scenarios. The approach remains computationally efficient, consistent with subchannel-level analysis, yet incorporates sufficient physics to bridge localized post-failure effects with bundle- and assembly-scale degradation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Stochastic Modeling of the Joint Neutron Number-Cumulative Fission Fragment Kinetic Energy Deposition Distribution and its Statistical Moments [Slides]

We investigate the joint distribution of the neutron number and cumulative fission-fragment kinetic energy (FKE) deposition, with a specific focus on low-order statistical moments: the mean, variance, and correlation. Starting from a point-kinetic framework, we derive a forward Master equation (FME) for the joint distribution and develop the corresponding moment equations.

42 ENGINEERING↗