Search NASA⌕ Search

SEARCH · Search NASA

Results for “fluctuation and dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Spectroscopic Measurement Techniques for Aerospace Flows

The conditions that characterize aerospace flows are so varied, that a single diagnostic technique is not sufficient for its measurement. Fluid dynamists use knowledge of similarity to help categorize and focus on different flow conditions. For example, the Reynolds number represents the ratio of inertial to viscous forces in a flow. When the velocity scales, length scales, and gas density are large and the magnitude of the molecular viscosity is low, the Reynolds number becomes large. This corresponds to large scale vehicles (e.g Airbus A380), fast moving objects (e.g. artillery projectiles), vehicles in dense fluids (e.g. submarine in water), or flows with low dynamic viscosity (e.g. skydiver in air). In each of these cases, the inertial forces dominate viscous forces, and unsteady turbulent fluctuations in the flow variables are observed. In contrast, flows with small length scales (e.g. dispersion of micro-particles in a solid rocket nozzle), slow moving objects (e.g. micro aerial vehicles), flows with low density gases (e.g. atmospheric re-entry), or fluids with a large magnitude of viscosity (e.g. engine coolant flow), all have low Reynolds numbers. In these cases, viscous forces become very important and often the flows can be steady and laminar. The Mach number, which is the ratio of the velocity to the speed of sound in the medium, also helps to differentiate types of flows. At very low Mach numbers, acoustic waves travel much faster than the object, and the flow can be assumed to be incompressible (e.g. Cessna 172 aircraft). As the object speed approaches the speed of sound, the gas density can become variable (e.g. flow over wing of Learjet 85). When the object speed is higher than the speed of sound (Ma > 1), the presences of shock waves and other gas dynamic features can become important to the vehicle performance (e.g. SR-71 Blackbird). In the hypersonic flow regime (Ma > 5), large changes in temperature begin to affect flow properties, causing real-gas effects to occur (e.g. X-43 Scramjet). At even higher Mach numbers, chemistry and nonequilibrium effects come into play (e.g. Startdust re-entry capsule), further complicating the measurement. These limits can be predicted by calculating the ratio of chemical and thermal relaxation time to the flow time scales. Other non-dimensional numbers can be used to further differentiate types of aerospace flows.

Danehy, Paul M.↗
NASA NTRS1988

Imaging results from Dynamics Explorer 1

An overview of several of the most significant results from the global imaging instrumentation on board the earth-orbiting spacecraft Dynamics Explorer 1 is provided. These topics include: (1) the evolution of the auroral oval during substorms; (2) fluctuations of the polar cap area encircled by the auroral oval during a magnetic substorm; (3) the mapping of poleward arcs of the auroral oval into the plasma sheet boundary layer; (4) the theta aurora; (5) atmospheric holes; (6) the geocorona; and (7) the rates of water loss from Comet Halley.

Frank, L. A.↗
NASA NTRS1988

Monte Carlo modeling of large-scale ion-conic generation

Cyclotron resonance with observed electric field fluctuations is demonstrated to be responsible for production of the oxygen ion conics that are observed by the Dynamics Explorer 1 satellite in the central plasma sheet region of the earth's auroral zone. The ion velocity distribution is described by a quasi-linear diffusion equation which is solved using the Monte Carlo technique. The acceleration produced by the observed wave spectrum agrees well with the ion observations, in both form and magnitude.

Retterer, J. M.↗
NASA NTRS1994

Array Of Probes To Measure Static Pressure And Turbulence

Shapes and arrangements chosen to emphasize desired components of fluctuating pressures. Arrays of pressure probes designed with cross sections and orifices that impart specified directional responses to dynamic pressures, such that one can extract time-averaged static pressure from measurements.

Rossow, Vernon J.↗
NASA NTRS1996

An MHD Study of the Interaction Between the Solar Wind and the Interstellar Medium

The overall objective of this research program is to obtain a better understanding of the interaction between the solar wind and the interstellar medium through the use of numerical solutions of the time-dependent magnetohydrodynamic (MHD) equations. The simulated results have been compared with observations where possible and with the results from previous analytic and numerical studies. The primary accomplishment of this project has been the development of codes for 2-D models in both spherical and cylindrical coordinates and the application of the codes to the solar wind/interstellar medium interaction. Computations have been carried out for both a relatively simple gas-dynamic interaction and a flow-aligned interstellar magnetic field. The results have been shown to compare favorably with models that use more approximations and to modify and extend the previous results as would be expected. The simulations have also been used along with a data analysis study to provide a quantitative estimate of the distance to the termination and bow shocks. Some of the specific topics that have been studied are: (1) gas dynamic models of the solar wind/interstellar medium interaction, (2) termination shock response to large-scale solar wind fluctuations, and (3) distances to the termination shock and heliopause. The main results from each of these studies are summarized. The results were published in three papers which are included as attachments.

Steinolfson, R. S.↗
NASA NTRS1999

The Role of Self-Organized Criticality in the Substorm Phenomenon and its Relation to Localized Reconnection in the Plasma Sheet

Recent observations of the magnetotail plasma sheet have shown it to be a dynamic and turbulent region. Research has found strong turbulence in the plasma sheet at approximately 20 Earth's Radius tailward of Earth; the turbulence is observed at all activity levels. The existence of strong turbulence in the plasma sheet in the region associated with substorm onset might be thought difficult to reconcile with the coherence and repeatability of the substorm cycle. We review a variety of evidence that strongly suggests the magnetotail is driven, through magnetic flux transfer, into a state of "self-organized criticality" (SOC). It is an important property of physical systems that evolve into SOC that they self-organize into a unique, global dynamic state. This global state is inevitable, and repeatable. In this state, however, small-spatiotemporal-scale system fluctuations are unpredictable and can be only described statistically. This is the basis, we think, for the global coherence and repeatability of the substorm phenomenon in the turbulent plasma sheet. At, or near, substorm onset the plasma sheet can be described by a global SOC state containing significant small scale turbulence. In several recent studies, "sandpile" models were driven into SOC and then shown to reproduce various measures of substorm activity. We discuss the plasma physical foundation of these sandpile models. The evolution of simple continuum plasma sheet models into SOC-like states of many small reconnection events in the turbulent plasma sheet under the will be demonstrated. We view the substorm phenomenon as an avalanche assumption that the plasma sheet is in a SOC state.

Klimas, A. J.↗
NASA NTRS2016

Wavenumber-frequency Spectra of Pressure Fluctuations Measured via Fast Response Pressure Sensitive Paint

The recent advancement in fast-response Pressure-Sensitive Paint (PSP) allows time-resolved measurements of unsteady pressure fluctuations from a dense grid of spatial points on a wind tunnel model. This capability allows for direct calculations of the wavenumber-frequency (k-ω) spectrum of pressure fluctuations. Such data, useful for the vibro-acoustics analysis of aerospace vehicles, are difficult to obtain otherwise. For the present work, time histories of pressure fluctuations on a flat plate subjected to vortex shedding from a rectangular bluff-body were measured using PSP. The light intensity levels in the photographic images were then converted to instantaneous pressure histories by applying calibration constants, which were calculated from a few dynamic pressure sensors placed at selective points on the plate. Fourier transform of the time-histories from a large number of spatial points provided k-ω spectra for pressure fluctuations. The data provides first glimpse into the possibility of creating detailed forcing functions for vibro-acoustics analysis of aerospace vehicles, albeit for a limited frequency range.

Pressure Sensitive Paint↗
NASA NTRS1977

System for measuring three fluctuating velocity components in a turbulently flowing fluid

A system is described for measuring fluid velocity in a turbulently flowing fluid including a sensing apparatus for dynamically sensing the mainstream and two orthogonal cross velocity components of the fluid. A transducer operative is included to provide three electrical output signals representative of the velocity components in the mainstream, and in the cross directions. Signal processors can be utilized to derive the Reynolds stress wave and the Reynolds stress.

Cheng, D. Y.↗
NASA NTRS2005

Data-Analysis System for Entry, Descent, and Landing

A report describes the Entry Descent Landing Data Analysis (EDA), which is a system of signal-processing software and computer hardware for acquiring status data conveyed by multiple-frequency-shift-keying tone signals transmitted by a spacecraft during descent to the surface of a remote planet. The design of the EDA meets the challenge of processing weak, fluctuating signals that are Doppler-shifted by amounts that are only partly predictable. The software supports both real-time and post processing. The software performs fast-Fourier-transform integration, parallel frequency tracking with prediction, and mapping of detected tones to specific events. The use of backtrack and refinement parallel-processing threads helps to minimize data gaps. The design affords flexibility to enable division of a descent track into segments, within each of which the EDA is configured optimally for processing in the face of signal conditions and uncertainties. A dynamic-lock-state feature enables the detection of signals using minimum required computing power less when signals are steadily detected, more when signals fluctuate. At present, the hardware comprises eight dual-processor personal-computer modules and a server. The hardware is modular, making it possible to increase computing power by adding computers.

Pham, Timothy↗
NASA NTRS2002

Structure and Dynamics of the Quiet Solar Chromosphere

The grant supported research on the structure of the quiet, nonmagnetic chromosphere and on wave excitation and propagation in both the nonmagnetic chromosphere and the magnetic network. The work on the structure of the chromosphere culminated in the recognition that between two competing views of the solar chromosphere, older models by Avrett and collaborators (referred to as VAL) and the newer, dynamical model by Carlsson & Stein (referred to as CS), the clear decision is in favor of the older models, and this in spite of the evident lack of physics, which does not include wave motion and oscillations. The contrast between the static VAL models and the dynamical CS model can be stated most succinctly by comparing the temperature variation implied by the VAL models and the temperature fluctuations of the CS model, which are, respectively, of the order of 10% for the VAL model (at heights where hydrogen is 50% ionized) and a factor of 10 (at the upper boundary of their chromospheric model). The huge fluctuations of the CS model have never been observed, whereas the smaller temperature variations of the VAL models are consistent with ground-based and space-based observations. While it should be obvious which model describes the Sun and which one fails, the case is far from settled in the minds of solar physicists. Thus, much educational work remains to be done and, of course, more research to develop arguments that make the case more convincing. The research on waves and oscillations has been based on a unified theory of excitation of acoustic waves in the field-free atmosphere and of transverse and longitudinal waves in magnetic flux tubes located in the magnetic network by noting, first, that impulsive excitation of all these waves in gravitationally stratified media leads to oscillations at the respective cutoff frequencies and, second, that the observed oscillation frequencies in the nonmagnetic and magnetic parts of the chromosphere match corresponding cutoff frequencies in the upper solar photosphere. The dynamical simulations by Carlsson and Stein have been most instructive and of fundamental importance for understanding wave propagation in a stratified medium by their "flaws", the most important of which is an intensity excess at the H2v emission peak in the H line of Ca II, which is surprising since the observed intensity should have been an upper limit to the simulated intensity. The only plausible explanation for a predicted intensity that is higher than observed is that energy is spread horizontally in upward propagation in the Sun, but not in the plane-wave modeling of CS (as well as by almost everyone else). Investigations of the horizontal size of the region disturbed by the upward-propagating shock in the acoustic-wave propagation implies that the waves in H2v bright-point oscillations emanate from a point source with a diameter corresponding to the width of an intergranular lane, about 100 km, and reach a size of about 4000 km in the upper layers of the chromosphere. Linear, analytic modeling of waves emanating from a point source in a stratified atmosphere shows that the upward-expanding propagation channel does not have sharp boundaries and that the shape of the wave front depends on the order of the wave behind the initial pulse. Otherwise, the behavior of the linear waves resembles that of the nonlinear shock waves observed in the Sun. Research that needs to be done to firm up the conclusions reached above concerns the numerical simulations of nonlinear waves and oscillations in a three-dimensional stratified atmosphere with impulsive excitation, and observations linking directly the horizontal size of the disturbed area in upward propagation to individual waves.

Kalkofen, Wolfgang↗
NASA NTRS2007

Dynamic Snap-Through of Thermally Buckled Structures by a Reduced Order Method

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures exposed to combined high intensity random pressure fluctuations and thermal loadings. The study is conducted on a flat aluminum beam, which permits a comparison of results obtained by a reduced-order analysis with those obtained from a numerically intensive simulation in physical degrees-of-freedom. A uniformly distributed thermal loading is first applied to investigate the dynamic instability associated with thermal buckling. A uniformly distributed random loading is added to investigate the combined thermal-acoustic response. In the latter case, three types of response characteristics are considered, namely: (i) small amplitude vibration around one of the two stable buckling equilibrium positions, (ii) intermittent snap-through response between the two equilibrium positions, and (iii) persistent snap-through response between the two equilibrium positions. For the reduced-order analysis, four categories of modal basis functions are identified including those having symmetric transverse, anti-symmetric transverse, symmetric in-plane, and anti-symmetric in-plane displacements. The effect of basis selection on the quality of results is investigated for the dynamic thermal buckling and combined thermal-acoustic response. It is found that despite symmetric geometry, loading, and boundary conditions, the anti-symmetric transverse and symmetric in-plane modes must be included in the basis as they participate in the snap-through behavior.

Przekop, Adam↗
NASA NTRS2006

Dynamic Snap-Through of Thin-Walled Structures by a Reduced Order Method

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures exposed to combined high intensity random pressure fluctuations and thermal loadings. The study is conducted on a flat aluminum beam, which permits a comparison of results obtained by a reduced-order analysis with those obtained from a numerically intensive simulation in physical degrees-of-freedom. A uniformly distributed thermal loading is first applied to investigate the dynamic instability associated with thermal buckling. A uniformly distributed random loading is added to investigate the combined thermal-acoustic response. In the latter case, three types of response characteristics are considered, namely: (i) small amplitude vibration around one of the two stable buckling equilibrium positions, (ii) intermittent snap-through response between the two equilibrium positions, and (iii) persistent snap-through response between the two equilibrium positions. For the reduced order analysis, four categories of modal basis functions are identified including those having symmetric transverse (ST), anti-symmetric transverse (AT), symmetric in-plane (SI), and anti-symmetric in-plane (AI) displacements. The effect of basis selection on the quality of results is investigated for the dynamic thermal buckling and combined thermal-acoustic response. It is found that despite symmetric geometry, loading, and boundary conditions, the AT and SI modes must be included in the basis as they participate in the snap-through behavior.

Przekop, Adam↗
NASA NTRS2016

Improving Fidelity of Launch Vehicle Liftoff Acoustic Simulations

Launch vehicles experience high acoustic loads during ignition and liftoff affected by the interaction of rocket plume generated acoustic waves with launch pad structures. Application of highly parallelized Computational Fluid Dynamics (CFD) analysis tools optimized for application on the NAS computer systems such as the Loci/CHEM program now enable simulation of time-accurate, turbulent, multi-species plume formation and interaction with launch pad geometry and capture the generation of acoustic noise at the source regions in the plume shear layers and impingement regions. These CFD solvers are robust in capturing the acoustic fluctuations, but they are too dissipative to accurately resolve the propagation of the acoustic waves throughout the launch environment domain along the vehicle. A hybrid Computational Fluid Dynamics and Computational Aero-Acoustics (CFD/CAA) modeling framework has been developed to improve such liftoff acoustic environment predictions. The framework combines the existing highly-scalable NASA production CFD code, Loci/CHEM, with a high-order accurate discontinuous Galerkin (DG) solver, Loci/THRUST, developed in the same computational framework. Loci/THRUST employs a low dissipation, high-order, unstructured DG method to accurately propagate acoustic waves away from the source regions across large distances. The DG solver is currently capable of solving up to 4th order solutions for non-linear, conservative acoustic field propagation. Higher order boundary conditions are implemented to accurately model the reflection and refraction of acoustic waves on launch pad components. The DG solver accepts generalized unstructured meshes, enabling efficient application of common mesh generation tools for CHEM and THRUST simulations. The DG solution is coupled with the CFD solution at interface boundaries placed near the CFD acoustic source regions. Both simulations are executed simultaneously with coordinated boundary condition data exchange.

Liever, Peter↗
NASA NTRS1978

A review of electrostatic wave measurements on auroral magnetic field lines

The review emphasizes experimental evidence for electrostatic waves on auroral zone magnetic field lines. Data were obtained from radar, balloon, rocket, and satellite observations. The paper is organized around three topics: (1) the turbulent density and velocity fields of the magnetospheric flow, (2) instabilities associated with the convection electric field and its interactions with the neutral atmosphere, and (3) waves and discontinuities in the dynamic region at about one earth radius above the auroral zone. Measurements of both the electric field and density fluctuation component of such waves are included. Although this is not a theoretical study, an attempt is made to organize the measurements about the existing theoretical framework.

Kelley, M. C.↗
NASA NTRS1988

Pressure measurements of impinging jet with asymmetric nozzle

For modern aircraft, impinging surfaces are commonly used as a device for obtaining vector thrust from engine exhaust. The nature of dynamic loading is important to understand for design purposes. In this study, the frequency, mode, and level of pressure fluctuations generated by an elliptic jet are examined. The elliptic jet is used because it has several operational advantages over a circular jet.

Ho, Chih-Ming↗
NASA NTRS1990

Turbulence measurements and noise generation in a transonic cryogenic wind tunnel

A high-frequency combination probe was used to measure dynamic flow quality in the test section of the NASA Langley 0.3-m Transonic Cryogenic Tunnel. The probe measures fluctuating stagnation (total) temperature and pressure, static pressure, and flow angles in two orthogonal planes. Simultaneous measurements of unsteady total temperature and pressure were also made in the settling chamber of the tunnel. The data show that the stagnation temperature fluctuations remain constant, and the stagnation pressure fluctuations increase by a factor of two, as the flow accelerates from the settling chamber to the test section. In the test section, the maximum rms value of the normalized fluctuating velocity is 0.7 percent. Correlation coefficients failed to show vorticity, entropy, or sound as the dominant mode of turbulence in the tunnel.

Ng, W. F.↗
NASA NTRS1992

Detector noise statistics in the non-linear regime

The statistical behavior of an idealized linear detector in the presence of threshold and saturation levels is examined. It is assumed that the noise is governed by the statistical fluctuations in the number of photons emitted by the source during an exposure. Since physical detectors cannot have infinite dynamic range, our model illustrates that all devices have non-linear regimes, particularly at high count rates. The primary effect is a decrease in the statistical variance about the mean signal due to a portion of the expected noise distribution being removed via clipping. Higher order statistical moments are also examined, in particular, skewness and kurtosis. In principle, the expected distortion in the detector noise characteristics can be calibrated using flatfield observations with count rates matched to the observations. For this purpose, some basic statistical methods that utilize Fourier analysis techniques are described.

Shopbell, P. L.↗