Search NASA⌕ Search

SEARCH · Search NASA

Results for “form factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Charm Form Factors at Cleo-c

Many precision tests of the Standard Model require input from Lattice QCD or other QCD techniques. Of particular importance are the semileptonic form factors used to extract V{sub ub} in semileptonic B decays. Similarities between the D and B sector make charm semileptonic decays an excellent testing ground for the increasingly precise predictions of Lattice QCD. CLEO-c has recently used its entire data sample to produce a set of measurements involving the decays D{sup 0}{yields}{pi}{sup -}e{sup +}{nu}{sub e}, D{sup 0}{yields}K{sup -}e{sup +}{nu}{sub e}, D{sup +}{pi}{sup 0}e{sup +}{nu}{sub e}, and D{sup +}K-bar{sup 0}e{sup +}{nu}{sub e}. These results, which include the world's most precise measurements of D{yields}{pi} form factors, are in agreement with currently available theoretical results and are significantly more precise.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improving the K{pi} vector form factor through K{sub l3} constraints

The K{pi} vector form factor, F{sub +}{sup K{pi}}, used to reproduce the Belle spectrum of {tau}{yields}K{pi}{nu}{sub {tau}} decays is described by means of a three-times subtracted dispersion relation also incorporating constraints from K{sub l3} decays. The slope and curvature of F{sub +}{sup K{pi}} are fitted to the data yielding {lambda}{sub +}{sup '} = (25.49{+-}0.31)x10{sup -3} and {lambda}{sub +}{sup ''} (12.22{+-}0.14)x10{sup -4}. The pole parameters of the K*(892){sup {+-}} are found to be m{sub K*(892){sup {+-}}} = 892.0{+-}0.5 MeV and {Gamma}{sub K*(892){sup {+-}}} = 46.5{+-}1.1 MeV. The phase-space integrals relevant for K{sub l3} analyses and the P-wave isospin-1/2 K{pi} phase-shift threshold parameters are also calculated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New Proton Form Factor Ratio Recoil Polarization Measurements in Hall C at JLab

The experimental determination of the proton elastic form factors has become a very active field since two experiments at JLab using the double-polarization technique revealed a stark discrepancy from the previous Rosenbluth data. In a next step, started in the fall of 2007, a new experiment in Hall C at JLab has pushed the Q2 limit from 5.6 to 8.54 GeV2, with intermediate points at 5.2 and 6.8 GeV2. The kinematics dependence of the form factor ratio at 2.5 GeV2 has also been investigated. The current status of the data analysis and some preliminary results are reported.

Perdrisat, C. F.↗

Accurate optimization of amino acid form factors for computing small-angle X-ray scattering intensity of atomistic protein structures

Structure modelling via small-angle X-ray scattering (SAXS) data generally requires intensive computations of scattering intensity from any given biomolecular structure, where the accurate evaluation of SAXS profiles using coarse-grained (CG) methods is vital to improve computational efficiency. To date, most CG SAXS computing methods have been based on a single-bead-per-residue approximation but have neglected structural correlations between amino acids. To improve the accuracy of scattering calculations, accurate CG form factors of amino acids are now derived using a rigorous optimization strategy, termed electron-density matching (EDM), to best fit electron-density distributions of protein structures. This EDM method is compared with and tested against other CG SAXS computing methods, and the resulting CG SAXS profiles from EDM agree better with all-atom theoretical SAXS data. By including the protein hydration shell represented by explicit CG water molecules and the correction of protein excluded volume, the developed CG form factors also reproduce the selected experimental SAXS profiles with very small deviations. Taken together, these EDM-derived CG form factors present an accurate and efficient computational approach for SAXS computing, especially when higher molecular details (represented by the q range of the SAXS data) become necessary for effective structure modelling.

Tong, Dudu↗

Electromagnetic and two-photon transition form factors of the pseudoscalar mesons: An algebraic model computation

We compute electromagnetic and two-photon transition form factors of ground-state pseudoscalar mesons: π , K , η c , η b . To this end, we employ an algebraic model based upon the coupled formalism of Schwinger-Dyson and Bethe-Salpeter equations. Within this approach, the dressed quark propagator and the relevant Bethe-Salpeter amplitude encode the internal structure of the corresponding meson. Electromagnetic properties of the meson are probed via the quark-photon interaction. The algebraic model employed by us unifies the treatment of all ground-state pseudoscalar mesons. Its parameters are carefully fitted performing a global analysis of existing experimental data including the knowledge of the charge radii of the mesons studied. We then compute and predict electromagnetic and two-photon transition form factors for a wide range of probing photon momentum-squared which is of direct relevance to the experimental observations carried out thus far or planned at different hadron physics facilities such as the Thomas Jefferson National Accelerator Facility (JLab) and the forthcoming Electron-Ion Collider. We also present comparisons with other theoretical models and approaches and lattice quantum chromodynamics. Published by the American Physical Society 2024

Higuera-Angulo, I. M. (ORCID:0000000256008875)↗

Semileptonic Form Factor ratio B_s->D_s/B->D and Its Application to BR(B^0_s->\mu^+\mu^-)

We present a (2+1)-flavor lattice QCD calculation of the form factor ratio between the semileptonic decays {bar B}{sub s}{sup 0} {yields} D{sub s}{sup +}l{sup -}{bar {nu}} and {bar B}{sup 0} {yields} D{sup +}l{sup -}{bar {nu}}. This ratio is an important theoretical input to the hadronic determination of the B meson fragmentation fraction ratio f{sub s}/f{sub d} which enters in the measurement of BR(B{sub s}{sup 0} {yields} {mu}{sup +}{mu}{sup -}). Small lattice spacings and high statistics enable us to simulate the decays with a dynamic final D meson of small momentum and reliably extract the hadronic matrix elements at nonzero recoil. We report our preliminary result for the form factor ratio at the corresponding momentum transfer of the two decays f{sub 0}{sup (s)} (M{sub {pi}}{sup 2})/f{sub 0}{sup (d)} (M{sub K}{sup 2}).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluation of Small Form Factor Fiber Optic Interconnects for the NASA Electronics Parts and Packaging Program (NEPP)

The Diamond AVIM optical fiber connector has been used for over a decade in flight environments. AVIM which stands for Aviation Intermediate Maintenance is always referenced as a fiber optic connector type from the DIN (Deutsches Institut fur Normung) family of optical fiber connectors. The newly available Mini AVIM and DMI (Definition Multimedia Interface) connectors also by Diamond provide similar features as the high performance AVIM with the added benefits of being small form factor for board mount and internal box use where long connectors and strain relief can not be accommodated. Transceiver, fiber laser technology and receiver optic technology based on small sized constraints will benefit the most by the reduction in connector form factor. It is for this reason that the Mini AVIM is being evaluated for multimode and single mode optical fiber use in both fiber based and cable based packaging configurations. In a fiber based termination, there are no cable materials to bond to the connector. The only bonding that is conducted is the mounting of the fiber with epoxy to the connector ferrules (which are called DMI ferrules). In a cable configuration, the compatibility of the connector subcomponents along with the upjacketing materials of the cable around the fiber needs to be considered carefully for termination fabrication. Cabled terminations will show greater insertion loss and high probability of failures during thermal cycling testing. This is due to the stressing of the combination of materials that each have different Coefficients of Thermal Expansion (CTE's) and that are bonded together to the connector subcomponents. As the materials flex during thermal excursions, forces are applied to the termination and can make the system fail if the grouping of materials (per their CTE's) are not compatible and this includes cable materials, epoxies, ferrule and connector body components. For this evaluation, multimode 100 micron core step index fiber was used for the fiber terminated condition, and single mode SMF-28 upjacketed with W.L. Gore Flexlite was used for the cabled configuration. For background purposes, a comparison is presented here for information purposes between the high performance AVIM connector features and the Mini AVIM small form factor connectors. Basic connector features are described here.

Ott, Melanie↗

Nucleon and Deuteron Form Factors from BLAST

The BLAST experiment was designed to study in a systematic manner the spin-dependent, electromagnetic interaction on hydrogen and deuterium. Measuring only asymmetries in electron scattering with respect to the beam helicity, target spin, or both; the BLAST experiment was able to extract information on nucleon and deuteron form factors independent of beam intensity or target density. By further forming 'super-ratios' of asymmetries, measurements were possible independent of beam and target polarization thus reducing uncertainties due to these quantities as well. Some of the form factor results from BLAST will be briefly presented here. Also, in response to observed discrepancies between polarization measurements and those obtained using traditional Rosenbluth separation techniques a proposed experiment, OLYMPUS, which will use the BLAST detector to measure the two photon contribution to elastic electron scattering will also be presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Super Bigbite Project: A Study of Nucleon Form Factors

A proposed set of instrumentation, collectively referred to as the Super Bigbite project, is presented. Used in three different con figurations it will allow measurements of three nucleon electromagnetic form factors GEn, GEp, and GMn with unprecedented precision to Q2-values up to three times higher than existing data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Duality and form factors in the thermally deformed two-dimensional tricritical Ising model

The thermal deformation of the critical point action of the 2D tricritical Ising model gives rise to an exact scattering theory with seven massive excitations based on the exceptional E_7 E 7 Lie algebra. The high and low temperature phases of this model are related by duality. This duality guarantees that the leading and sub-leading magnetisation operators, \sigma(x) σ ( x ) and \sigma'(x) σ ′ ( x ) , in either phase are accompanied by associated disorder operators, \mu(x) μ ( x ) and \mu'(x) μ ′ ( x ) . Working specifically in the high temperature phase, we write down the sets of bootstrap equations for these four operators. For \sigma(x) σ ( x ) and \sigma'(x) σ ′ ( x ) , the equations are identical in form and are parameterised by the values of the one-particle form factors of the two lightest \mathbb{Z}_2 ℤ 2 odd particles. Similarly, the equations for \mu(x) μ ( x ) and \mu'(x) μ ′ ( x ) have identical form and are parameterised by two elementary form factors. Using the clustering property, we show that these four sets of solutions are eventually not independent; instead, the parameters of the solutions for \sigma(x)/\sigma'(x) σ ( x ) / σ ′ ( x ) are fixed in terms of those for \mu(x)/\mu'(x) μ ( x ) / μ ′ ( x ) . We use the truncated conformal space approach to confirm numerically the derived expressions of the matrix elements as well as the validity of the \Delta Δ -sum rule as applied to the off-critical correlators. We employ the derived form factors of the order and disorder operators to compute the exact dynamical structure factors of the theory, a set of quantities with a rich spectroscopy which may be directly tested in future inelastic neutron or Raman scattering experiments.

Cortes Cubero, Axel↗

The Mainz high-precision proton form factor measurement

An extensive measurement of the elastic H(e, e')p reaction in the Q{sup 2}-region from 0.003 to 1 (GeV/c){sup 2} has been performed with the 3-spectrometer-setup of the A1 collaboration at the Mainz Microtron. The dataset consists of about 3000 overlapping cross section measurements with a high level of internal redundancy. The large number of precisely measured cross sections allow for a determination of the electric and magnetic form factors with strict control over statistical and systematic errors, in particular also of the charge and magnetization radii of the proton. Besides the classical Rosenbluth separation, the form factors are separated by direct, global fits of different sufficiently flexible models.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improved semileptonic form factor calculations in lattice QCD

We investigate the computational efficiency of two stochastic based alternatives to the sequential propagator method used in lattice QCD calculations of heavy-light semileptonic form factors. In the first method, we replace the sequential propagator, which couples the calculation of two of the three propagators required for the calculation, with a stochastic propagator so that the calculations of all three propagators are independent. This method is more flexible than the sequential propagator method but introduces stochastic noise. We study the noise to determine when this method becomes competitive with the sequential propagator method, and find that for any practical calculation it is competitive with or superior to the sequential propagator method. We also examine a second stochastic method, the so-called 'one-end trick', concluding it is relatively inefficient in this context. The investigation is carried out on two gauge field ensembles, using the nonperturbatively improved Wilson-Sheikholeslami-Wohlert action with N{sub f}=2 mass-degenerate sea quarks. The two ensembles have similar lattice spacings but different sea-quark masses. We use the first stochastic method to extract O(a)-improved, matched lattice results for the semileptonic form factors on the ensemble with lighter sea quarks, extracting f{sub +}(0).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nucleon electromagnetic form factors from lattice QCD using a nearly physical pion mass

We propose lattice QCD calculations of nucleon electromagnetic form factors using pion masses m π = 149, 202, and 254 MeV and an action with clover-improved Wilson quarks coupled to smeared gauge fields, as used by the Budapest-Marseille-Wuppertal Collaboration. Particular attention is paid to the removal of the effects of excited-state contamination by calculations at three source-sink separations and the use of the summation and generalized pencil-of-function methods. The combination of a calculation at the nearly physical mass m π = 149 MeV in a large spatial volume (m π L s = 4.2) and the removal of excited-state effects yields agreement with experiment for the electric and magnetic form factors G E (Q 2 ) and G M (Q 2 ) up to Q 2 = 0.5 GeV 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

$B\to\pi\ell\nu$ semileptonic form factors from unquenched lattice QCD and determination of $|V_{ub}|$

We compute the $B\to\pi\ell\nu$ semileptonic form factors and update the determination of the CKM matrix element $|V_{ub}|$. We use the MILC asqtad ensembles with $N_f=2+1$ sea quarks at four different lattice spacings in the range $a \approx 0.045$~fm to $0.12$~fm. The lattice form factors are extrapolated to the continuum limit using SU(2) staggered chiral perturbation theory in the hard pion limit, followed by an extrapolation in $q^2$ to the full kinematic range using a functional $z$-parameterization. The extrapolation is combined with the experimental measurements of the partial branching fraction to extract $|V_{ub}|$. Our preliminary result is $|V_{ub}|=(3.72\pm 0.14)\times 10^{-3}$, where the error reflects both the lattice and experimental uncertainties, which are now on par with each other.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resonance form factors from finite-volume correlation functions with the external field method

A novel method for the extraction of form factors of unstable particles on the lattice is proposed. The approach is based on the study of two-particle scattering in a static, spatially periodic external field by using a generalization of the Lüscher method in the presence of such a field. It is shown that the resonance form factor is given by the derivative of the resonance pole position in the complex plane with respect to the coupling constant to the external field. Unlike the standard approach, this proposal does not suffer from problems caused by the presence of the triangle diagram.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of Form Factors with the BaBar Experiment

Selected recent results on measurements of form factors by the BaBar Collaboration are reviewed, including e{sup +}e{sup -} {yields} {eta}{prime}{gamma}, leptonic and semileptonic charm decays from data collected at or near the {Upsilon}(4S) resonance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pion Form Factor in Improved Holographic QCD Backgrounds

We extend our recent numerical calculation of the pion electromagnetic form factor F{sub {pi}}(Q{sup 2}) in holographic QCD with a background field that interpolates between 'hard-wall' and 'soft-wall' models to obtain an improved model that reproduces the desirable phenomenological features of both. In all cases, F{sub {pi}}for large Q{sup 2} is shallower than data, an effect that can be cured by relaxing the fit to one of the static observables, particularly the decay constant f{sub {pi}}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of |Vcb| and the Form-Factor Slope in Bbar -> Dlnu Decays in Events Tagged by a Fully Reconstructed B Meson

We present a measurement of the Cabibbo-Kobayashi-Maskawa matrix element |V{sub cb}| and the form-factor slope {rho}{sup 2} in {bar B} {yields} D{ell}{sup -} {bar {nu}}{sub {ell}} decays based on 460 million B{bar B} events recorded at the {Gamma}(4S) resonance with the BABAR detector. {bar B} {yields} D{ell}{sup -} {bar {nu}}{sub {ell}} decays are selected in events in which a hadronic decay of the second B meson is fully reconstructed. We measure the differential decay rate and determine G(1)|V{sub cb}| = (43.0 {+-} 1.9 {+-} 1.4) x 10{sup -3} and {rho}{sup 2} = 1.20 {+-}0.09 {+-} 0.04, where G(1) is the hadronic form factor at the point of zero recoil. We also determine the exclusive branching fractions and find {Beta}(B{sup -} {yields} D{sup 0} {ell}{sup -}{bar {nu}}{sub {ell}}) = (2.31 {+-} 0.08 {+-} 0.09)% and {Beta}(B{sup 0} {yields} D{sup +} {ell}{sup -} {bar {nu}}{sub {ell}}) = (2.23 {+-} 0.11 {+-} 0.11)%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗