Search NASA⌕ Search

SEARCH · Search NASA

Results for “geosynchronous orbits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Origin of orbital debris impacts on Long Duration Exposure Facility's (LDEF) trailing surfaces

Orbital debris tracked by the US Space Command is mostly in near circular orbit around the Earth. If small debris were in the same types of orbits, there would be very few orbital debris impacts on the Long Duration Exposure Facility's (LDEF's) trailing surfaces. However, at least 15 percent of the impacts found on the trailing A03 gold surface was found to be orbital debris impacts. This measurement suggests that the orbital distribution of small debris is not the same as that of larger debris. Although this is not a total surprise, since modelling of satellite breakups has predicted different distributions, it does raise questions as to what types of orbits could be responsible for these impacts. A model was developed to explain these LDEF results. The model calculates the expected debris impact crater distribution around LDEF, as a function of debris orbital parameters. The results show that only low inclination and highly elliptical orbits could be responsible for these impacts. The most common object left in this type of orbit is an orbital transfer stage, used by the US and ESA to place objects into geosynchronous orbit, and inclinations near 28 and 7 degrees for the US and ESA, respectively. Even large fragments from satellites, which break up in these types of orbits, are difficult to observe from the ground; consequently, little is known about the number and characteristics of breakups in these orbits. The LDEF data suggest that these objects are breaking up. The LDEF data also suggest that the ratio of the contribution of small debris from this type of orbit to the contribution from circular orbits is about an order of magnitude larger than the same ratio for debris tracked by the US Space Command.

Kessler, Donald J.↗
NASA NTRS1993

Origin of orbital debris impacts on LDEF's trailing surfaces

A model was developed to determine the origin of orbital impacts measured on the training surfaces of LDEF. The model calculates the expected debris impact crater distribution around LDEF as a function of debris orbital parameters. The results show that only highly elliptical, low inclination orbits could be responsible for these impacts. The most common objects left in this type of orbit are orbital transfer stages used by the U.S. and ESA to place payloads into geosynchronous orbit. Objects in this type of orbit are difficult to catalog by the U.S. Space Command; consequently there are independent reasons to believe that the catalog does not adequately represent this population. This analysis concludes that the relative number of cataloged objects with highly elliptical, low inclination orbits must be increased by a factor of 20 to be consistent with the LDEF data.

Kessler, Donald J.↗
NASA NTRS2015

On Possible Arc Inception on Low Voltage Solar Array

Recent analysis of spacecraft failures during the period of 1990-2013 demonstrated clearly that electrostatic discharges caused more than 8 percent of all registered failures and anomalies, and comprised the most costly losses (25 percent) for operating companies and agencies. The electrostatic discharges on spacecraft surfaces are the results of differential charging above some critical (threshold) voltages. The mechanisms of differential charging are well known, and various methods have been developed to prevent a generation of significant electric fields in areas of triple junctions. For example, low bus voltages in Low Earth Orbit plasma environment and slightly conducting layer over cover-glass (ITO) in Geosynchronous Orbit surroundings are believed to be quite reliable measures to prevent discharges on respective surfaces. In most cases, the vulnerable elements of spacecraft (solar arrays, diode boards, etc.) go through comprehensive ground tests in vacuum chambers. However, tests articles contain the miniscule fragments of spacecraft components such as 10-30 solar cells of many thousands deployed on spacecraft in orbit. This is one reason why manufacturing defects may not be revealed in ground tests but expose themselves in arcing on array surface in space. The other reason for ineffectiveness of discharge preventive measures is aging of all materials in harsh orbital environments. The expected life time of modern spacecraft varies within the range of five-fifteen years, and thermal cycling, radiation damages, and mechanical stresses can result in surface erosion on conductive layers and microscopic cracks in cover-glass sheets and adhesive films. These possible damages may cause significant increases in local electric field strengths and subsequent discharges. The primary discharges may or may not be detrimental to spacecraft operation, but they can produce the necessary conditions for sustained arcs initiation. Multiple measures were developed to prevent sustained discharges between adjacent strings, and many ground tests were performed to determine threshold parameters (voltage and current) for sustained arcs. And again, manufacturing defects and aging in space environments may result in considerable decrease of critical threshold parameters. This paper is devoted to the analysis of possible reasons behind arcing on spacecraft with low bus voltages.

low voltage solar array↗
NASA NTRSDate not supplied

Radiation and Fault Tolerance for Neuromorphic Computing

• The solar wind emanating from the sun is a stream of energetic electrons and protons and ions that are the primary ionizing radiation contributions. • The Earth’s magnetosphere significantly reduces radiation exposure and mutes the effects of solar flares out to 65K Km orbital altitude. • The radiation environment is highly dependent upon mission profile: for example geosynchronous orbits can see 50 times the radiation dose of a polar orbit due to reduction of atmospheric/magnetospheric shielding. • In LEO, the magnetosphere shields the Earth by creating trapped Van Allen radiation belts consisting of electrons and protons, which create a challenging radiation environment confined to specific regions. • Even for LEO, radiation dose can vary by a factor of 30 or more from a quiet sun to a solar flare. • Galactic Cosmic Rays (GCRs) are also present at very high energy, but at low rates. • Radiation effects on semiconductors are highly dependent upon particles species, energy and flux. • Therefore, radiation tolerance requirements will vary with mission profile and duration.

Space Radiation↗
NASA NTRS1980

Solar electric propulsion - A versatile stage for earth orbiting missions

The paper examines recent developments in solar array and ion propulsion systems which make possible the utilization of readily available solar energy for spacecraft propulsion and operation. The Solar Electric Propulsion System (SEPS) stage represents a substantial increase in capability to perform interplanetary and earth orbiting missions due to the combination of high performance and low thrust. SEPS is an important augmentation to the Space Transportation System (STS) for numerous earth orbit missions because it can deliver a greatly increased total satellite mass to a geosynchronous orbit or greatly increase the on-orbit delta V capability.

Smith, D. D.↗
NASA NTRS1985

Design principles for nickel hydrogen cells and batteries

Nickel hydrogen cells, and more recently, bipolar batteries have been built by a variety of organizations. The design principles that have been used by the technology group at the Lewis Research Center draw upon their extensive background in separator technology, alkaline fuel cell technology, and several alkaline cell technology areas. These design principles have been incorporated into both the more contemporary individual pressure vessel (IPV) designs that were pioneered by other groups, as well as the more recent bipolar battery designs using active cooling that are being developed at LeRC and their contractors. These principles are rather straightforward applications of capillary force formalisms, coupled with the slowly developing data base resulting from careful post test analyses. The objective of this overall effort is directed towards the low Earth orbit (LEO) application where the cycle life requirements are much more severe than the geosynchronous orbit (GEO) application. Nickel hydrogen cells have already been successfully flown in an increasing number of GEO missions.

Thaller, L. H.↗
NASA NTRS1990

Communication analysis for the expendable explorer spacecraft

This report provides the results of communication analysis for the baseline and enhanced performance spacecraft designs proposed for Expendable Explorer Spacecraft (EES) series of missions. Five classes of orbits (Geosynchronous, Circular-28 degree inclination, Polar-90 degree inclination, Sunsynchronous-97 degree inclination, Molniya orbit) and a set of candidate instrument payloads provided by the ESS Study Manager were used to formulate the basis for the ESS Communications Study. The study was performed to assess the feasibility of using Space Network or ground stations for supporting the communications, tracking and data handling of the candidate instruments that are proposed to be launched into the desired orbit.

Source record↗
NASA NTRS1990

Science and application payloads in the 90's

An overview is conducted of the payloads under development for NASA to support space science and the Mission to Planet Earth. The science payloads reviewed include the Controls, Astrophysics, and Structures Experiment in Space (CASES), the Advanced Solar Observatory (ASO), the Laser Atmospheric Wind Sounder (LAWS), and the Lightning Imaging Sensor. The payloads are supported by the Extended Duration Orbiter, the Space Station Freedom, and an infrastructure that includes platforms in polar and geosynchronous orbits. The LAWS payload can provide data for global wind-profile measurements, and the ASO can coordinate solar-physics observations and study solar dynamic processes. The CASES payload is designed to investigate critical control technology for stabilizing and pointing large flexible structures in space for astrophysics missions.

De Sanctis, Carmine E.↗
NASA NTRS2014

Overview of Intelligent Power Controller Development for Human Deep Space Exploration

Intelligent or autonomous control of an entire spacecraft is a major technology that must be developed to enable NASA to meet its human exploration goals. NASA's current long term human space platform, the International Space Station, is in low earth orbit with almost continuous communication with the ground based mission control. This permits the near real-time control by the ground of all of the core systems including power. As NASA moves beyond Low Earth Orbit, the issues of communication time-lag and lack of communication bandwidth beyond geosynchronous orbit does not permit this type of operation. This paper presents the work currently ongoing at NASA to develop an architecture for an autonomous power control system as well as the effort to assemble that controller into the framework of the vehicle mission manager and other subsystem controllers to enable autonomous control of the complete spacecraft. Due to the common problems faced in both space power systems and terrestrial power system, the potential for spin-off applications of this technology for use in micro-grids located at the edge or user end of terrestrial power grids for peak power accommodation and reliability are described.

Space Flight↗
NASA NTRS2014

Overview of Intelligent Power Controller Development for Human Deep Space Exploration

Intelligent or autonomous control of an entire spacecraft is a major technology that must be developed to enable NASA to meet its human exploration goals. NASAs current long term human space platform, the International Space Station, is in low earth orbit with almost continuous communication with the ground based mission control. This permits the near real-time control by the ground of all of the core systems including power. As NASA moves beyond Low Earth Orbit, the issues of communication time-lag and lack of communication bandwidth beyond geosynchronous orbit does not permit this type of operation. This paper presents the work currently ongoing at NASA to develop an architecture for an autonomous power control system as well as the effort to assemble that controller into the framework of the vehicle mission manager and other subsystem controllers to enable autonomous control of the complete spacecraft. Due to the common problems faced in both space power systems and terrestrial power system, the potential for spin-off applications of this technology for use in micro-grids located at the edge or user end of terrestrial power grids for peak power accommodation and reliability are described.

Space Flight↗
NASA NTRS2014

Overview of Intelligent Power Controller Development for Human Deep Space Exploration

Intelligent or autonomous control of an entire spacecraft is a major technology that must be developed to enable NASA to meet its human exploration goals. NASA's current long term human space platform, the International Space Station, is in low Earth orbit with almost continuous communication with the ground based mission control. This permits the near real-time control by the ground of all of the core systems including power. As NASA moves beyond low Earth orbit, the issues of communication time-lag and lack of communication bandwidth beyond geosynchronous orbit does not permit this type of operation. This paper presents the work currently ongoing at NASA to develop an architecture for an autonomous power control system as well as the effort to assemble that controller into the framework of the vehicle mission manager and other subsystem controllers to enable autonomous control of the complete spacecraft. Due to the common problems faced in both space power systems and terrestrial power system, the potential for spin-off applications of this technology for use in micro-grids located at the edge or user end of terrestrial power grids for peak power accommodation and reliability are described.

Space Flight↗
NASA NTRS1976

Substorm phenomena and the uniqueness of the geostationary orbit for observation of dynamic processes in the magnetosphere

During the Spring equinox, both ATS-6 and ATS-5 were in geosynchronous orbit with a separation of about 11 deg longitude. A ground-based campaign was undertaken by Eather, Mende, and Judge to observe aurora at the foot of the ATS field line with a variety of instruments. Initial results support the injection boundary hypothesis of Mauk and McIlwain. Also during this period, the Cs-ion thrusters on both spacecraft were exercized in a deliberate attempt to control the spacecraft potential. Some success was achieved, and the presence of a sheath with a potential minimum about ATS-5 has been demonstrated (the sheath about ATS-6 is observed directly).

Deforest, S. E.↗
NASA NTRS1974

Development of large earth orbital space station

This paper outlines the major aspects of the development of large earth orbital space stations. At the outset, the uses of the space station are surveyed and the major systems and configurational drivers enumerated. A representative 12-man space station, studied by the Space Division of North American Rockwell Corporation under NASA contract is described. The subsequent discussion centers around earth-to-orbit logistics and possible future missions with emphasis on the establishment of a branch station geosynchronous orbit. In dealing with the associated transportation between low and high orbits, the concept of a geospace shuttle station oscillating between near-earth and synchronous orbit is compared with conventional shuttle vehicles with chemical and nuclear propulsion. In the final part, the evolution of the 12-man space station to a larger space base is described.

Ehricke, K. A.↗
NASA NTRS1977

Performance tests of two precision attitude determination systems

Results of laboratory performance tests of two satellite attitude determination systems are given. One system employed a strapdown star tracker and gyro assembly, the other a single axis, gimballed star tracker and a gyro assembly. The laboratory tests simulated those orbit conditions which would be experienced on a three axis stabilized, earth pointed satellite in geosynchronous orbit. A ground-fixed laboratory test was performed in which system axes remained stationary in the laboratory coordinates while revolving star beams stimulated the star trackers. The laboratory instrumentation techniques used to meet the stringent accuracy requirements are described. Results are presented which show both systems met the performance goal of 3.6 arc seconds. Comparative analyses of both systems are also discussed.

Mcaloon, K. J.↗
NASA NTRS1985

Design principles for nickel-hydrogen cells and batteries

Nickel-hydrogen cells and, more recently, bipolar batteries have been built by a variety of organizations. The design principles that have been used by the technology group at the NASA Lewis Research Center draw upon their extensive background in separator technology, alkaline fuel cell technology, and several alkaline cell technology areas. These design principles have been incorporated into both the more contemporary individual pressure vessel (IPV) designs that were pioneered by other groups, as well as the more recent bipolar battery designs using active cooling that are being developed at NASA Lewis Research Center and under contract. These principles are rather straightforward applications of capillary force formalisms, coupled with the slowly developing data base resulting from careful post test analyses. The objective of this overall effort is directed towards the low-Earth-orbit (LEO) application where the cycle life requirements are much more severe than the geosynchronous-orbit (GEO) application. A summary of the design principles employed is presented along with a discussion of the recommendations for component pore sizes and pore size distributions, as well as suggested materials of construction. These will be made based on our experience in these areas to show how these design principles have been translated into operating hardware.

Thaller, L. H.↗
NASA NTRS1985

Design principles for nickel-hydrogen cells and batteries

Nickel-hydrogen cells and, more recently, bipolar batteries have been built by a variety of organizations. The design principles that have been used by the technology group at the NASA Lewis Research Center draw upon their extensive background in separator technology, alkaline fuel cell technology, and several alkaline cell technology areas. These design principles have been incorporated into both the more contemporary individual pressure vessel (IPV) designs that were pioneered by other groups, as well as the more recent bipolar battery designs using active cooling that are being developed at NASA Lewis Research Center and under contract. These principles are rather straightforward applications of capillary force formalisms, coupled with the slowly developing data base resulting from careful post test analyses. The objective of this overall effort is directed towards the low-earth-orbit (LEO) application where the cycle life requirements are much more severe than the geosynchronous-orbit (GEO) application. A summary of the design principles employed is presented along with a discussion of the recommendations for component pore sizes and pore size distributions, as well as suggested materials of construction. These will be made based on our experience in these areas to show how these design principles have been translated into operating hardware.

Thaller, L. H.↗
NASA NTRS1997

Geosynchronous Technology Infusion Studies

NASA and NOAA are now sponsoring Advanced Geosynchronous Studies (AGeoS), technology work that will lead to the next generation of space sensors located in geosynchronous orbit. This report briefly describes the initial steps being taken to investigate the high priority geosynchronous measurement needs identified so far.

Hilliard, L.↗
NASA NTRS2018

Autonomous Power Controller for the NASA Gateway

Intelligent autonomous control of a spacecraft is an enabling technology that must be developed for deep space human exploration. NASA's current long term human space platform, the International Space Station which is in Low Earth Orbit, is in almost continuous communication with ground based mission control. This allows near real-time operation of all the vehicle core systems, including power, from the ground. As the focus shifts from Low Earth Orbit to deep space, challenges associated with communication time-lag and bandwidth limitations beyond geosynchronous orbit do not permit this type of ground based operation. These communication limitations motivate autonomous vehicle operations, including the vehicle subsystems such as power. This presentation will describe the ongoing development of an Autonomous Power Control (APC) system that can be used for a deep space exploration spacecraft. This work extends previous work on developing an autonomous power control which includes developing a control architecture for deep space vehicles, the use of software agents, and constructing a control simulation lab for demonstrating this capability. This presentation will begin with a discussion of the representative future power architectures that will be required for deep space exploration vehicles. The presentation then will describe how the power controller will integrate with the vehicle followed with a discussion of the autonomous power controller. Next it will describe the test setup used to evaluate the performance of the system and lastly show some of the test results. To develop the type of controller envisioned, it will be necessary to employ a detailed real-time simulation to evaluate its performance and ultimately verify its functionality.

Csank, Jeffrey↗