Search NASA⌕ Search

SEARCH · Search NASA

Results for “graph model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Models of polarized infrared emission from bipolar nebulae

Many stars with circumstellar dust shells show a high degree of linear polarization (Sato et al. 1985). We are developing a model which assumes that the polarization arises from scattering by circumstellar dust. Our model assumes a geometry in which the star is surrounded by an optically thin spherical dust shell and embedded within an optically thick disk. This geometry is consistent with that proposed for objects with bipolar molecular outflow. This is important because many bipolar flow objects have also been observed to be highly polarized. The high degree of linear polarization is produced because the disk differentially attenuates the light from the star. The light incident from the point source is attenuated by a factor of exp(-tau/cos theta) where theta is the angle between a ray from the point source to the scatterer and a ray normal to the disk; tau is the optical depth at the wavelength of interest. Hence, the light scattered from the regions directly above and below the disk give the largest contribution to the total flux. The scattering angle for light from these regions is near 90 deg., so the light is strongly polarized and, in the Rayleigh scattering regime, is polarized parallel to the disk. The Stokes parameters for the scattered light from each particle in the shell are calculated by using the scattering matrix elements generated by a Mie scattering program. After the Stokes parameters for each particle are computed they are summed to give the Stokes parameters for the entire shell. Two graphs are presented which show the intensity and polarization spectrum generated by our model using the optical constants for astronomical silicates as defined by Draine and Lee (1984).

Burns, M. S.↗

Sensitivity of an energy balance climate model with predicted snowfall rates

A snowfall parameterization and a polar-ice-sheet model are developed and applied to the two-level zonally averaged seasonal energy-balance climate model of Held and Suarez (1979), and sensitivity experiments involving changes in insolation are performed both with and without ice sheets. The results are presented in tables and graphs, and the hydrological-cycle response to insolation changes is found to be similar to that predicted by global-circulation models employing prescribed precipitation levels, with a somewhat higher sensitivity in the snow line. The area covered by ice sheets in the ice-sheet models is shown to be greater than that covered by permanent snow in the models without ice sheets, an effect attributed to lower surface temperatures over the ice. It is inferred that an increase in the solar constant can cause increased high-latitude precipitation but not an ice age.

Bowman, K. P.↗

Probabilistic structural analysis of space propulsion system LOX post

The probabilistic structural analysis program NESSUS (Numerical Evaluation of Stochastic Structures Under Stress; Cruse et al., 1988) is applied to characterize the dynamic loading and response of the Space Shuttle main engine (SSME) LOX post. The design and operation of the SSME are reviewed; the LOX post structure is described; and particular attention is given to the generation of composite load spectra, the finite-element model of the LOX post, and the steps in the NESSUS structural analysis. The results are presented in extensive tables and graphs, and it is shown that NESSUS correctly predicts the structural effects of changes in the temperature loading. The probabilistic approach also facilitates (1) damage assessments for a given failure model (based on gas temperature, heat-shield gap, and material properties) and (2) correlation of the gas temperature with operational parameters such as engine thrust.

Newell, J. F.↗

Aeroservoelastic modeling and applications using minimum-state approximations of the unsteady aerodynamics

The theoretical basis of flexible-aircraft modeling techniques encompassing aerodynamic, control, and elastic-structure effects is investigated analytically, with a focus on methods which employ minimum-state approximations for the unsteady aerodynamics. Rational-function approximations to generalized aerodynamic forces are reviewed; constraints and lag-coefficient optimization are explained; the problem of physical weighting in the minimum-state equations of motion is examined; and results of typical analyses from the NASA Active Flexible Wing project (Perry et al., 1988) are presented in extensive tables and graphs and discussed in detail. The minimum-state approach is shown to produce accurate models at significantly reduced computation costs.

Tiffany, Sherwood H.↗

Research study on neutral thermodynamic atmospheric model

The Global Reference Atmospheric Model is used along with the revised perturbation statistics to evaluate and computer graph various atmospheric statistics along a space shuttle reference mission and abort trajectory. The trajectory plots are height vs. ground range, with height from ground level to 155 km and ground range along the reentry trajectory. Cross sectional plots, height vs. latitude or longitude, are also generated for 80 deg longitude, with heights from 30 km to 90 km and latitude from -90 deg to +90 deg, and for 45 deg latitude, with heights from 30 km to 90 km and longitudes from 180 deg E to 180 deg W. The variables plotted are monthly average pressure, density, temperature, wind components, and wind speed and standard deviations and 99th inter-percentile range for each of these variables.

Hargraves, W. R.↗

The use of analogs in the innovation process - A software engineering protocol analysis

A human information processing account of how experienced practitioners utilize analogs in the innovation process is presented. The protocols of several practitioners are collected and analyzed. The problem behavior graphs, knowledge elements utilized, and operator elements applied are described, and a descriptive model of the innovation process is assembled. Implications for a production system, deviations from other models of the innovation process, and extensions to other models of the analogy procedure are explored.

Silverman, B. G.↗

Ozone reference models for CIRA

The data bases and computational techniques used in recent models of the O3 distribution in the earth atmosphere are described, summarizing the results of ongoing efforts to define an O3 reference model for incorporation into CIRA. Consideration is given to the analysis of data from satellite instruments (Nimbus 7 LIMS, TOMS, and SBUV; SME UVS and IR; and AE-2 SAGE) to construct models of total column O3 and vertical O3 structure. The satellite-based model predictions are then compared with balloon, rocket, and umkehr measurements in extensive graphs: good agreement is demonstrated both among the satellite data sets and between satellite and nonsatellite data sets.

Keating, G. M.↗

Quantifying fault recovery in multiprocessor systems

Various aspects of reliable computing are formalized and quantified with emphasis on efficient fault recovery. The mathematical model which proves to be most appropriate is provided by the theory of graphs. New measures for fault recovery are developed and the value of elements of the fault recovery vector are observed to depend not only on the computation graph H and the architecture graph G, but also on the specific location of a fault. In the examples, a hypercube is chosen as a representative of parallel computer architecture, and a pipeline as a typical configuration for program execution. Dependability qualities of such a system is defined with or without a fault. These qualities are determined by the resiliency triple defined by three parameters: multiplicity, robustness, and configurability. Parameters for measuring the recovery effectiveness are also introduced in terms of distance, time, and the number of new, used, and moved nodes and edges.

Malek, Miroslaw↗

The gravitational effects on liquid phase sintering

The liquid-phase sintering of heavy-metal PM alloys containing 78, 83, 88, 93, or 98 wt pct W plus Ni and Fe in a 7:3 ratio is investigated experimentally. The focus is on the potential role of gravity in phenomena such as specimen slumping and distortion, liquid migration, and microstructural coarsening. The results are presented in extensive graphs and micrographs and discussed in detail, and a preliminary grain-growth model is developed which accounts for the effects of contiguity and the volume fraction of solid.

Kipphut, C. M.↗

Generic POCC architecture: Revised recommended refinements and object-oriented interfaces

This document is a sequel to the report entitled Generic POCC Architectures, dated April 5, 1989, prepared by CTA under Contract NAS5-31500, Task 28-11600. That document presented a generic architecture based upon current technology, and a series of three refinements based on object-oriented analysis principles and expectations for POCC evolution. The current document revisits the object-oriented analysis of POCC's. We have reassessed the functional groupings that best adhere to object-oriented principles and have revised the recommended architecture accordingly. We present an updated view of the recommended generic POCC architecture using the same graphical models as the previous document: entity-relationship diagrams, dataflow diagrams, and composition graphs. In addition, we present another view in the form of entity-interface diagrams (EID's). EID's may be viewed as a precursor to object diagrams which are the basic construct of the general object-oriented design (GOOD) methodology. The entity-interface diagrams, together with their textual annotations, constitute our specification of object-oriented interfaces in the generic architecture.

Source record↗

Quantum Leap: Evaluating the Feasibility of Quantum Machine Learning Using NASA Earth Observational Data

This study explores the feasibility of leveraging quantum machine learning (QML) to analyze NASA Earth Observational (EO) data for climate change research, with a particular focus on the phenomenon of ”crop frosting” which has become more prevalent due to climate change. We implemented and evaluated two QML models, the Variational Quantum Classifier (VQC) and Quantum Support Vector Classifier (QSVC), in both simulated and real quantum computing environments using a 127 qubit IBM quantum processor. Our study emphasizes the scientific rigor in comparing these quantum models with a classical Support Vector Machine (SVM) classifier, highlighting their performance in processing climate data. The results offer valuable insights into the potential scientific advantages, limitations, and scalability of QML for analyzing EO datasets, thus paving the way for more advanced climate modeling and predictive analytics using quantum computing. We showcased how Environmental Interaction Knowledge Graphs (EIKGs) and Digital Twins (DTs) can be integrated into this study. This research underscores the transformative potential of Classical and QML leveraging KGs and DT to address the multifaceted challenges posed by climate change.

Quantum Computing↗

Correlations in cosmic density fields

A method is proposed to place constraints on the functional form of the high-order correlation functions zeta(sub n) that arise in cosmic density fields at large scales. This technique is based on a mass-in-cell statistic and a difference of mass in partitions of a cell. The relationship between these measures is sensitive to the formal structure of the zeta(sub n) as well as their amplitudes. This relationship is quantified in several theoretical models of structure, based on the hierarchical clustering paradigm. The results lead to a test for specific types of hierarchical clustering that is sensitive to correlations of all orders. The method is applied to examples of simulated large-scaled structure dominated by cold dark matter. In the preliminary study, the hierarchical paradigm appears to be a realistic approximation over a broad range of the scales. Furthermore, there is evidence that graphs of low-order vertices are dominant. On the basis of simulated data a phenomological model is specified that gives a good representation of clustering from linear scales to the strongly clustered regime (zeta(sub 2) approximately 500).

Bromley, B. C.↗

Ring dynamics

Theoretical models of planetary-ring dynamics are discussed in a detailed analytical review and illustrated with graphs and diagrams. The streamline concept is introduced, and the phenomena associated with the transport of angular momentum are described. Particular attention is then given to (1) broad rings like those of Saturn (shepherding, density-wave excitation, gaps, bending-wave excitation, multiringlet structures, inner-edge shepherding, and the possibility of polar rings around Neptune), (2) narrow rings like those of Uranus (shepherding, ring shapes, and a self-gravity model of rigid precession), and (3) ring arcs like those seen in stellar-occultation observations of Neptune.

Borderies, Nicole↗

Multi-Parent Clustering Algorithms from Stochastic Grammar Data Models

We introduce a statistical data model and an associated optimization-based clustering algorithm which allows data vectors to belong to zero, one or several "parent" clusters. For each data vector the algorithm makes a discrete decision among these alternatives. Thus, a recursive version of this algorithm would place data clusters in a Directed Acyclic Graph rather than a tree. We test the algorithm with synthetic data generated according to the statistical data model. We also illustrate the algorithm using real data from large-scale gene expression assays.

Mjoisness, Eric↗

Spectral energy distributions of active galactic nuclei between 0.1 and 100 microns

The 0.1-100-micron line-free spectral energy distributions of 29 AGN are characterized by fitting simple models to data from IRAS and IUE observations and ground-based NIR and optical spectrophotometry. The data are presented in tables and graphs and discussed in detail. It is found that nuclear dust does not play a major role in most of the Seyfert 1 galaxies and QSOs, which can be described by a model with four spectral components.

Edelson, R. A.↗

Requirement Discovery Using Embedded Knowledge Graph with ChatGPT

- NASA’s Air Traffic Management-Exploration (ATM-X) Urban Air Mobility (UAM) Airspace Subproject is conducting research that evolves UAM airspace towards a highly automated and operationally flexible system of the future. - (see https://www.nasa.gov/uam-overview/ for more information) - The complexity of UAM airspace, and its evolution through a series of transformative epochs, requires a planning tool to effectively organize, integrate, and communicate the research that will guide the evolution of UAM operations in the National Airspace System (NAS). - The planning tool, called the UAM airspace research roadmap (or just roadmap), is being developed as a new system engineering methodology leveraging model based system engineering (MBSE) and artificial intelligence capabilities. This presentation gives an overview of the Knowledge Graph and ChatGPT applications within this system engineering methodology and will describe how it is being used to meet the ATM-X UAM Airspace Subproject’s overarching research goals.

systems engineering↗

A system for verifying models and classification maps by extraction of information from a variety of data sources

Recent updates to a geographical information system (GIS) called VICAR (Video Image Communication and Retrieval)/IBIS are described. The system is designed to handle data from many different formats (vector, raster, tabular) and many different sources (models, radar images, ground truth surveys, optical images). All the data are referenced to a single georeference plane, and average or typical values for parameters defined within a polygonal region are stored in a tabular file, called an info file. The info file format allows tracking of data in time, maintenance of links between component data sets and the georeference image, conversion of pixel values to `actual' values (e.g., radar cross-section, luminance, temperature), graph plotting, data manipulation, generation of training vectors for classification algorithms, and comparison between actual measurements and model predictions (with ground truth data as input).

Norikane, L.↗