Search NASA⌕ Search

SEARCH · Search NASA

Results for “individual differences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Ab Initio Calculations of Water Line Strengths

We report on the determination of a high quality ab initiu potential energy surface (PES) and dipole moment function for water. This PES is empirically adjusted to improve the agreement between the computed line positions and those from the HITRAN 92 data base with J less than 6 for H2O. The changes in the PES are small, nonetheless including an estimate of core (oxygen 1s) electron correlation greatly improves the agreement with experiment. Using this adjusted PES, we can match 30,092 of the 30,117 transitions in the HITRAN 96 data base for H2O with theoretical lines. The 10,25,50,75, and 90 percentiles of the difference between the calculated and tabulated line positions are -0.11, -0.04, -0.01, 0.02, and 0.07 l/cm. Non-adiabatic effects are not explicitly included. About 3% of the tabulated line positions appear to be incorrect. Similar agreement using this adjusted PES is obtained for the oxygen 17 and oxygen 18 isotopes. For HDO, the agreement is not as good, with root-mean-square error of 0.25 l/cm for lines with J less than 6. This error is reduced to 0.02 l/cm by including a small asymmetric correction to the PES, which is parameterized by simultaneously fitting to HDO md D2O data. Scaling this correction by mass factors yields good results for T2O and HTO. The intensities summed over vibrational bands are usually in good agreement between the calculations and the tabulated results, but individual lines strengths can differ greatly. A high temperature list consisting of 307,721,352 lines is generated for H2O using our PES and dipole moment function.

Schwenke, David W.↗
NASA NTRS1971

Status and plans of NASA's Materials Science and Manufacturing in Space /MS-MS/ program.

Following two years of relatively low-level exploratory work, the Materials Science and Manufacturing in Space program is now in a phase of expansion toward higher levels of effort. The main thrust of this effort is toward initiation of a research and development program on the Space Shuttle missions that can prepare the way for possible commercial manufacturing operations on permanently orbiting space stations. Experiment capabilities currently being planned for the Space Shuttle will be based on an inventory of reusable general-purpose equipment that can be configured in many different ways to meet individual experiment requirements. It is expected that this approach can support very large numbers of experiments and make flight opportunities accessible to many potential experimenters who would not be prepared to involve themselves in the development of flight hardware.

Armstrong, W. O.↗
NASA NTRS1972

A solid state converter for measurement of aircraft noise and sonic boom

The problems inherent in present systems of instrumentation for measuring aircraft noise and sonic boom include limited frequency response, expensive connecting cables, sensitivity to cable length and type, high sensitivity to environmental conditions, and additional limitations of individual system components. Furthermore, differing requirements have resulted in the use of two different systems for aircraft noise and sonic boom measurements respectively. To alleviate these difficulties a unified system of instrumentation suitable for both types of measurements was developed. The system features a new solid state converter connected to a zero drive amplifier. The system was found insensitive to cable length and type up to at least 1000 ft and requires no impedance matching networks. The converter itself has flat frequency response from dc to 28 kHz (- 3 db), dynamic range of 72 db, and noise floor of 50 db in the band 22.4 Hz to 22.4 kHz.

Zuckerwar, A. J.↗
NASA NTRS1974

Status of FEP encapsulated solar cell modules used in terrestrial applications

The Lewis Research Center has been engaged in transferring the FEP encapsulated solar cell technology developed for the space program to terrestrial applications. FEP encapsulated solar cell modules and arrays were designed and built expressly for terrestrial applications. Solar cell power systems were installed at three different land sites, while individual modules are undergoing marine environment tests. Four additional power systems are being completed for installation during the summer of 1974. These tests have revealed some minor problems which have been corrected. The results confirm the inherent utility of FEP encapsulated terrestrial solar cell systems.

Ratajczak, A. F.↗
NASA NTRS1974

Status of FEP encapsulated solar cell modules used in terrestrial applications

FEP (fluorinated ethylene propylene) encapsulated solar cell modules and arrays have been designed and built expressly for terrestrial applications. Solar cell power systems have been installed at three different land sites, while individual modules are undergoing marine-environment tests. Four additional power systems are being completed for installation during the summer of 1974. These tests have revealed some minor problems which have been corrected. The results confirm the inherent utility of FEP encapsulated terrestrial solar cell systems.

Ratajczak, A. F.↗
NASA NTRS1975

ATS-6 - Solar cell flight experiment after 325 days in synchronous orbit

Preliminary results of the Applications Technology Satellite-6 (ATS-6) solar cell flight experiment to isolate and identify solar cell degradation mechanisms resulting from particulate radiation and to obtain specific design data applicable to extended synchronous spacecraft missions are presented. The experiment includes 80 individual cells representing 16 different solar cell/cover glass configurations. Most of the cells are 0.030 cm thick boron doped n/p cells with 10 ohm cm resistivity and solder-coated AgTi contacts. The voltage-current characteristics were measured regularly. The data for the first 325 days of flight show short circuit currents 1-8% higher than measurements made with solar simulations. Maximum power varied between -1 and +6%. After 50 days in orbit the degradation of short circuit current due to ultraviolet effects was determined to be about 2%. All cells except those with fluorinated ethylene propylene covers performed well after 325 days.

Goldhammer, L. J.↗
NASA NTRS1977

90-GHz flux-density measurements of variable radio sources

Results are presented for measurements of the flux densities of 10 variable extragalactic sources at 85.2 or 90 GHz, which were made over a period of almost seven years with the NRAO 36-ft millimeter-wave antenna. The primary flux-density calibration standards used include Jupiter, Saturn, Mars, and the small-diameter Galactic source DR 21. Measured flux densities are given as a function of time (in years) for the sources 3C 84, NRAO 150, 3C 120, OJ 287, 4C 39.25, 3C 273, 3C 279, 3C 345, BL Lac, and 3C 454.3. No statistically meaningful flux-density changes during an observing interval (1 to 3 days) are detected for any source, and a high degree of correlation between flux-density variations at 85.2 or 90 GHz and those observed at lower frequencies is found in all 10 sources. Some variations observed at different frequencies in several individual sources are briefly discussed.

Hobbs, R. W.↗
NASA NTRS1978

Magnetic dips in the solar wind

Using magnetic data from the HELIOS 1 fluxgate magnetometer, with a 0.2 sec resolution, the structures of several interplanetary discontinuities involving magnetic dips and rotations of the magnetic field vector were investigated. A minimum variance analysis illustrates the behavior of the magnetic field through the transition in the plane of its maximum variation. Using this analysis, quite different structures have been individuated and, in particular, narrow transitions resembling almost one dimensional reconnected neutral sheets. For the thinner cases (scale lengths of the magnetic rotation of the order or smaller than 1,000 km), results show the observed structures could be the nonlinear effect of a resistive tearing mode instability having developed on an originally one dimensional neutral sheet at the solar corona.

Dobrowolny, M.↗
NASA NTRS1980

Some useful concepts for the designer in treating cumulative fatigue damage at elevated temperatures

The paper concentrates on three subjects: (1) further development of the double-linear damage rule for cumulative fatigue damage summation in the sub-creep temperature range; (2) a new consideration of the effect of strain reversals in the creep range of materials, whereby reversals that occur later in the histogram can influence the degree of damage caused by earlier loading events; and (3) the application of the minimum-commitment time-temperature parameter to the treatment of creep rupture of multiheats wherein considerable differences in properties of individual heats may occur. Numerical examples and plots are given.

Manson, S. S.↗
NASA NTRS1980

Multiyear slant-path rain fade statistics at 28.56 GHz for Wallops Island, Va.

The multiyear rain fade statistics collected in the Wallops Island, Va., area at 28.56 GHz during 1977 through 1979 showed that the overall fade distributions for the individual years showed small differences. Exceedance time variations were observed in the monthly and time of day fade data from year to year, but the second year fades relative to the first year had less than 20% rms deviation. These results are useful to designers of earth-satellite communications systems which require reliable fade statistics for establishing link-margin requirements. The Wallops Island fade distribution had an rms decibel deviation of less than 14% when compared with the International Radio Consultative Committee prediction model.

Goldhirsh, J.↗
NASA NTRS1984

Computer simulations of space-borne meteorological systems on the CYBER 205

Because of the extreme expense involved in developing and flight testing meteorological instruments, an extensive series of numerical modeling experiments to simulate the performance of meteorological observing systems were performed on CYBER 205. The studies compare the relative importance of different global measurements of individual and composite systems of the meteorological variables needed to determine the state of the atmosphere. The assessments are made in terms of the systems ability to improve 12 hour global forecasts. Each experiment involves the daily assimilation of simulated data that is obtained from a data set called nature. This data is obtained from two sources: first, a long two-month general circulation integration with the GLAS 4th Order Forecast Model and second, global analysis prepared by the National Meteorological Center, NOAA, from the current observing systems twice daily.

Halem, M.↗
NASA NTRS1985

Single-Frequency Multitransmitter Telemetry

Telemetry technique for data collection on general aviation aircraft involved in aeronautical research consists of many sensor/transmitter units at different locations on aircraft. Individual signaling and logic at each sensor/transmitter send signals to single receiver in airplane. Transmitters operate independently on same frequency and are not synchronized to receiver, eliminating erroneous data resulting from two-transmitter overlap.

Carreno, V. A.↗
NASA NTRS1988

Satellite observations of a new type of discrete VLF emission at L below 4

A new type of discrete whistler mode emission has been observed in the magnetosphere at L below 4. The emission elements are confined to a bandwidth of 1-5 kHz, with the lower cutoff frequency of the band varying with L shell, being equal to about 0.2-0.5 f(Heq), where f(Heq) is the equatorial electron gyrofrequency. The discrete and burstlike nature of the emissions is similar to that of chorus emissions typically observed at higher L; however, dispersion of individual elements is often different from typical chorus, and the emissions are observed inside as well as outside the plasmapause. The phenomenon seems to occur mainly in the early morning local time sector and is well correlated with geomagnetic activity, occurring mostly at high gasmagnetic activity. The analysis of data from the low-altitude ISIS-2 and the high-altitude De-1 satellites indictes that the emissions may be generated near the equatorial plane at frequencies of about 0.2 f(Heq) inside and about 0.35 f(Heq) outside the plasmapause. The parallel energy of electrons for gyroresonance with the observed waves is found to be about 20-50 keV in both cases.

Poulsen, W. L.↗
NASA NTRS1990

Experiment K-6-12. Morphometric studies of atrial or granules and hepatocytes. Part 1: Morphometric study of the liver; Part 2: The atrial granular accumulations

The livers of flight, F, rats from the Cosmos 1887 mission were markedly paler and heavier than those of the synchronous, S, and vivarium, V, controls. In the F group, microscopic study revealed extensive hepatocytic intracytoplasmic vacuolization which was moderate in the S and minimal in the V groups. The vacuoles were not sudanophilic and therefore were regarded as glycogenic in origin. To obtain objective data concerning the extent of the vacuolization, livers were examined by computer assisted morphometry. Measurements of profile area and perimeter of the hepatocyte nuclei and vacuoles were evaluated according to stereological principles. Results indicated that the volume density of the nuclei was less in the F group than in the S(p equal less than 0.0002) and V(p equal less than 0.001) groups. Mean volume of individual nuclei did not differ. Volume density of the vacuoles was greater in the F than in the V group (p equal less than 0.02) while their mean diameter was less (p equal less than 0.05). To ascertain the relationship between increase in liver weight of the flight animals and the results of this study, an assumption was made that the specific gravity of the vacuolar contents was similar to the other extranuclear components of the hepatocyte. On that basis, calculations showed that the elevated vacuolar volume density in the flight group did not cause the increased liver weight in those animals, but that the non-nuclear, non-vacuolar parenchymal compartment did contribute significantly. Factors that may have played a causal role in liver weight and vacuolar compartment increases are discussed.

Kraft, L. M.↗
NASA NTRS1989

Microgravity processing of particulate reinforced metal matrix composites

The elimination of such gravity-related effects as buoyancy-driven sedimentation can yield more homogeneous microstructures in composite materials whose individual constituents have widely differing densities. A comparison of composite samples consisting of particulate ceramics in a nickel aluminide matrix solidified under gravity levels ranging from 0.01 to 1.8 G indicates that the G force normal to the growth direction plays a fundamental role in determining the distribution of the reinforcement in the matrix. Composites with extremely uniform microstructures can be produced by these methods.

Morel, Donald E.↗
NASA NTRS1991

Optimal processor assignment for pipeline computations

The availability of large scale multitasked parallel architectures introduces the following processor assignment problem for pipelined computations. Given a set of tasks and their precedence constraints, along with their experimentally determined individual responses times for different processor sizes, find an assignment of processor to tasks. Two objectives are of interest: minimal response given a throughput requirement, and maximal throughput given a response time requirement. These assignment problems differ considerably from the classical mapping problem in which several tasks share a processor; instead, it is assumed that a large number of processors are to be assigned to a relatively small number of tasks. Efficient assignment algorithms were developed for different classes of task structures. For a p processor system and a series parallel precedence graph with n constituent tasks, an O(np2) algorithm is provided that finds the optimal assignment for the response time optimization problem; it was found that the assignment optimizing the constrained throughput in O(np2log p) time. Special cases of linear, independent, and tree graphs are also considered.

Nicol, David M.↗
NASA NTRS1992

Implementation of an intelligent control system

A laboratory testbed facility which was constructed at NASA LeRC for the development of an Intelligent Control System (ICS) for reusable rocket engines is described. The framework of the ICS consists of a hierarchy of various control and diagnostic functions. The traditional high speed, closed-loop controller resides at the lowest level of the ICS hierarchy. Above this level resides the diagnostic functions which identify engine faults. The ICS top level consists of the coordination function which manages the interaction between an expert system and a traditional control system. The purpose of the testbed is to demonstrate the feasibility of the OCS concept by implementing the ICS as the primary controller in a simulation of the Space Shuttle Main Engine (SSME). The functions of the ICS which are implemented in the testbed are as follows: an SSME dynamic simulation with selected fault mode models, a reconfigurable controller, a neural network for sensor validation, a model-based failure detection algorithm, a rule based failure detection algorithm, a diagnostic expert system, an intelligent coordinator, and a user interface which provides a graphical representation of the event occurring within the testbed. The diverse nature of the ICS has led to the development of a distributed architecture consisting of specialized hardware and software for the implementation of the various functions. This testbed is made up of five different computer systems. These individual computers are discussed along with the schemes used to implement the various ICS components. The communication between computers and the timing and synchronization between components are also addressed.

Simon, D. L.↗
NASA NTRS1992

Effects of management and topography on the radiometric response of a tallgrass prairie

Bidirectional reflectance measurements are obtained for grazed, burned ungrazed, and unburned ungrazed tallgrass prairie in eastern Kansas. Observations are also made on experimental plots where vegetation height and biomass were manipulated by mowing. While productivity of grazed or mowed sites was either equal to or greater than that on ungrazed or unmowed sites, individual or cumulative normalized difference vegetation index values tended to be positively correlated with biomass, not productivity.

Turner, C. L.↗