SEARCH · Search NASA

Results for “initial conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1983

The influence of the tropics on the prediction of ultralong waves. I - Tropical wind field

The effects of tropical wind data from the FGGE and tropical latent heating on numerical modeling of ultralong waves are considered in a two-part study. The model studied is the global fourth-order GLAS general circulation model, an energy-conserving format with horizontal differences calculated with fourth-order accuracy. Data assimilation experiments were performed with and without the wind data, with account taken of eastward and northward wind components, the geopotential height, and the relative humidity, all over pressure surfaces. The initial conditions were used to generate six pairs of forecasts, and the tropical wind error decreased after two days of prediction when the initial conditions contained the wind data. The deviations from the measured planetary wave data were attributed to differences in the initial rotational wind field, which varied on a three-day basis. The latent heat initial data had a five-day period and extended its influence beyond the tropical zone. The tropical heat sources sustained the tropical westerlies in the GLAS model, and removal of the tropical heat sources reversed the wind to easterlies.

Baker, W. E.↗

NASA NTRS1992

Diabatic dynamic initialization

A generalized dynamical adjustment procedure was applied to a diabatic model to produce balanced initial conditions. Namely, backward adiabatic model integration is followed by forward diabatic model integration, with a high frequency (low pass) filter in the form of the Euler-backward time differencing scheme being applied throughout the whole integration. As a result of the application of such a diabatic dynamic initialization procedure within the Goddard Laboratory for Atmospheres (GLA) 4-D data assimilation system, the following properties of forecasts from initialized fields are achieved right from the beginning of the usual forecast integration: (1) the forecast tendencies (and fields) are free of any noise due to imbalance in initial conditions; (2) the shocks related to an initial imbalance between model physics and dynamics, and especially the substantial initial imbalance of precipitation and evaporation fields, or the initial spin-up effect, are practically removed. Diabatic dynamic initialization has been compared with implicit nonlinear normal mode initialization, and found to be superior in removing the initial spin-up effect, and also in improving the tropical structure. The diabatic dynamic initialization procedure was successfully tested for the GLA system with the use of all conventional data and the GLA satellite data retrievals. It allows a smooth data insertion without any shocks or imbalances, which is highly desirable for efficient functioning of 4-D data assimilation systems. The developed initialization procedure is computationally efficient and in principle easily applicable to different forecast models.

Fox-Rabinovitz, Michael S.↗

NASA NTRS2016

Orbital Stability Regions for Hypothetical Natural Satellites of 101955 Bennu (1999 RQ36)

The Origins, Spectral Interpretation, Resource Investigation, Security-Regolith Explorer (OSIRIS-Rex) mission will be orbiting and returning a sample from near-Earth asteroid 101955 Bennu. Ground-based observations have determined that no object greater then 15 m in diameter is orbiting Bennu. This investigation explores the possible size and stability of a natural satellite around Bennu. The focus of this research is soley on the existence of stable orbits for a natural satellite and purposefully places how the natural satellite migrated to this orbit outside the bounds of this research. Numerical simulations modeling J2, third-body dynamics and solar radiation pressue is used on a large set of initial conditions that vary in semi-major axis, inclination, longititude of periapsis and natural satellite diameter. Stable orbital initial conditions for a given natural satellite diameter must remain in orbit for more than a thousand years without escape or collision from Bennu. The data found the possible existence of natural satellites in orbit around Bennu as small as 0.75 cm. Certain mechanisms such as the modified Laplace plane, Kozai resonance and the Sun-terminator plane are explored for yielding stable orbits of a given natural satelllite.

asteroids↗

DOE OSTI2025

What can solve the strong CP problem?

Three possible strategies have been advocated to solve the strong CP problem. The first is the axion, a dynamical mechanism that relaxes any initial value of the CP violating angle $\overline{θ}$ to zero. The second is the imposition of new symmetries that are believed to set $\overline{θ}$ to zero in the UV. The third is the acceptance of the fine tuning of parameters. We argue that the latter two solutions do not solve the strong CP problem. The θ term of QCD is not a parameter — it does not exist in the Hamiltonian. Rather, it is a property of the quantum state that our universe finds itself in, arising from the fact that there are CP violating states of a CP preserving Hamiltonian. It is not eliminated by imposing parity as a symmetry since the underlying theory is already parity symmetric and that does not preclude the existence of CP violating states. Moreover, since the value of θ realized in our universe is a consequence of measurement, it is inherently random and cannot be fine tuned by choice of parameters. Rather any fine tuning would require a tuning between parameters in the theory and the random outcome of measurement. Our results considerably strengthen the case for the existence of the axion and axion dark matter. The confusion around θ arises from the fact that unlike classical mechanics, the Hamiltonian and Lagrangian are not equivalent in quantum mechanics. The Hamiltonian defines the differential time evolution, whereas the Lagrangian is a solution to this evolution. Consequently, initial conditions could in principle appear in the Lagrangian but not in the Hamiltonian. This results in aspects of the initial condition such as θ misleadingly appearing in the Lagrangian as parameters. We comment on the similarity between the θ vacua and the violations of the constraint equations of classical gauge theories in quantum mechanics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Experiments on the single-mode Richtmyer–Meshkov instability with reshock at high energy densities

Here, the hydrodynamic instability growth of a reshocked single-mode interface between high energy density fluids is studied. A laser-driven shock wave is used to drive an initially solid, sinusoidal interface between a dense plastic (1.43 g/cc) and a light foam (≈ 0.110 g/cc). After the interface has grown to a nonlinear state where the amplitude is of order of the wavelength, it is reshocked. The reshock compresses the nonlinear perturbation, which then grows at about twice the rate. While the pre-reshock growth rate is sensitive to the initial amplitude and wavelength of the perturbation, the post-reshock growth rate is comparatively insensitive to the initial condition. Qualitatively, we observe that the perturbations are less coherent after reshock, consistent with the idea that having a reshock accelerates the transition to turbulence. We find that some memory of the initial condition remains, even after reshock at late time: it appears if the initial perturbations have large enough wavelengths, and the flow structure of size comparable to the initial wavelength persists through reshock. Our results agree with design simulations and are consistent with the phenomenology of reshock studies in conventional gaseous shock tubes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2008

Effects of Moist Convection on Hurricane Predictability

This study exemplifies inherent uncertainties in deterministic prediction of hurricane formation and intensity. Such uncertainties could ultimately limit the predictability of hurricanes at all time scales. In particular, this study highlights the predictability limit due to the effects on moist convection of initial-condition errors with amplitudes far smaller than those of any observation or analysis system. Not only can small and arguably unobservable differences in the initial conditions result in different routes to tropical cyclogenesis, but they can also determine whether or not a tropical disturbance will significantly develop. The details of how the initial vortex is built can depend on chaotic interactions of mesoscale features, such as cold pools from moist convection, whose timing and placement may significantly vary with minute initial differences. Inherent uncertainties in hurricane forecasts illustrate the need for developing advanced ensemble prediction systems to provide event-dependent probabilistic forecasts and risk assessment.

Zhang, Fuqing↗

NASA NTRS1990

Simulated forecast error and climate drift resulting from the omission of the upper stratosphere in numerical models

Using an NCAR community climate model, Version I, the forecast error growth and the climate drift resulting from the omission of the upper stratosphere are investigated. In the experiment, the control simulation is a seasonal integration of a medium horizontal general circulation model with 30 levels extending from the surface to the upper mesosphere, while the main experiment uses an identical model, except that only the bottom 15 levels (below 10 mb) are retained. It is shown that both random and systematic errors develop rapidly in the lower stratosphere with some local propagation into the troposphere in the 10-30-day time range. The random growth rate in the troposphere in the case of the altered upper boundary was found to be slightly faster than that for the initial-condition uncertainty alone. However, this is not likely to make a significant impact in operational forecast models, because the initial-condition uncertainty is very large.

Boville, Byron A.↗

NASA NTRS1978

Decay of homogeneous turbulence from a given state at higher Reynolds number

The turbulence equations are closed by specification of initial conditions (using either a Taylor or an exponential series) and by a modified Kovasznay-type closure. Good results for large times are obtained only for the initial-conditions closure used with four or more terms of an exponential series. The evolution of all of the initially-specified spectra can be calculated rather well from the theory. From a fundamental standpoint the method thus seems to be satisfactory.

Deissler, R. G.↗

NASA NTRS1978

Decay of homogeneous turbulence from a given state at higher Reynolds number

Deissler, R. G.↗

DOE OSTI2020

Scalar Power Spectra and Scalar Structure Function Evolution in the Richtmyer–Meshkov Instability Upon Reshock

The Richtmyer–Meshkov instability of a twice-shocked gas interface is studied using high-speed planar laser-induced fluorescence in the Wisconsin Shock Tube Laboratory's vertical shock tube. The initial condition is a shear layer with broadband diffuse perturbations at the interface between a helium–acetone mixture and argon. Furthermore, this initial condition is accelerated by a shock of nominal strength M = 1.9, and then accelerated again by the transmitted shock that reflects off the end wall of the tube. Three individual experiments are analyzed, the energy spectrum and the structure functions of the light gas mole fraction field are calculated and compared.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1984

A Study of the Adequacy of Quasi-geostrophic Dynamics for Modeling the Effect of Frontal Cyclones on the Larger Scale Flow

The major objectives of this study are to test the validity of quasi-geostrophic (QG) dynamics, compared to primitive equation (PE) dynamics for modeling the effect of cyclone waves on the larger scale flow, and to study the formation of frontal cyclones and the dynamics of occluded frontogenesis. In order to extend the realism of the initial conditions over those used in earlier work of this nature and in order to include strong surface frontal zones in the initial conditions, a horizontal resolution on the order of 100 km between gridpoints is needed. In order to allow for integrations of up to two weeks simulated time and to keep the logistics and cost of the runs feasible, the horizontal domain of the models must be reduced. Based on work concerning polar lows, the tropospheric static stability was reduced and was also allowed to vary in different tropospheric layers. Previous work used a 'standard atmosphere' temperature lapse rate. Stratospheric stability remains unchanged. The use of one of these 'reduced stability' cases, with no surface frontal zone present resulted in the discovery of normal mode perturbations.

Mudrick, S.↗

DOE OSTI2020

Development of a Testbed for Pipeline Flushing - 20425

Pipelines which carry high-level waste within the DOE complex should be properly flushed in the cases where stationary or moving beds of solid sediment occur, or lines are prone to hydrogen gas buildup. Present guidelines establish a minimum for the amount of water (flush volume) and flush velocity values used for post-transfer flushing operations to achieve satisfactory cleaning of pipelines. However, further studies are needed to find optimal operating velocity modes/values in order to minimizing the flush volume and consequent downstream waste. These efforts are significantly helpful to DOE waste remediation sites by preserving tank storage, preventing additional waste processing, and minimizing dilution and changes in waste chemistry. An experimental test loop was recently developed for study of non-Newtonian slurry flushing at the Florida International University (FIU). This loop was designed to create sediment beds of various materials and bed heights and investigate parameters that effect the efficiency of flushing operations. The objective is to find flush velocity values/modes which lead to satisfactory cleaning of transport lines with a minimum amount of water usage. A 165 ft experimental test loop made of 3-inch carbon steel pipes was constructed and used in initial testing campaigns. This pipe loop was equipped with real-time monitoring instruments to record variation of pressure, density, mass flow rate, and temperature during testing. Post-flush in-situ no-flow evaluations were performed using ultrasonic, endoscopy, and visual inspection. Additional post-flush evaluations were conducted using filtration and density monitoring of residuals within a designated circulations loop. These provisions enable comparison of pipeline cleanness before the start and after termination of flushing operations for efficiency evaluation. This paper presents efforts associated with flushing of kaolin-water mixtures at different concentrations and with various flush volume and flush velocity values/modes. In initial testing, efforts focused on creating repeatable sediment beds inside the pipeline in both fully-flooded (no pre-flush drainage) and gravity-drained (pre-flush drained) systems. Bed characterization (i.e., measurement of sediment height and solids concentration) was conducted to ensure about consistency of initial conditions between tests. Preliminary results for flushing study of 10% vol. kaolin-water mixtures starting from a fully-flooded initial condition showed that flushing with 1-line volume (65 gallons) could remove up to 72 percent of solids from the pipeline. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1986

Numerical modeling of water-vapor transport during pre-storm and COHMEX

Initial conditions are designed for numerical simulation of mesocale processes in the atmosphere using the Limited Area Mesoscale Prediction System (LAMPS) model. These initial conditions represent an idealized baroclinic wave in which the transport of water vapor can be simulated. The constructed atmosphere has two homogeneous air masses, polar front, polar jet stream and a stratosphere. All these simulate the basic structure of the earth's atmosphere. The hydrostatic and geostrophic balances make it possible to evaluate mutually consistent fields of wind and of the height of isobaric surfaces.

Djuric, Dusan↗

NASA NTRS1998

Overexpanding Coronal Mass Ejections at High Heliographic Latitudes: Observations and Simulations

Ulysses observations reveal that most coronal mass ejections (CMES) observed in the solar wind far from the Sun at high heliographic latitudes have large radial widths and are still expanding as they pass the spacecraft. CME radial widths ranging between 0.5 and 2.5 AU have observed at heliocentric distances between 1.4 and 4.6 AU and at latitudes greater than 22 deg. A CME may expand simply because it is ejected from the Sun with a leading edge speed that is greater than its trailing edge speed. Rarefaction waves produced by relative motion between a CME and the surrounding wind also can cause a CME to expand. Finally, a CME may expand because it is ejected into the wind with an internal pressure that is greater than that of the surrounding wind. In the latter case, which we have called 'overexpansion,' the expansion tends to drive compressive waves into the surrounding solar wind; these waves commonly steepen into shocks at large distances from the Sun. The relative importance of these various expansion processes differs from event to event depending upon initial conditions within the CME and the surrounding wind. Using Ulysses observations and a simple one-dimensional, gasdynamic code, we have explored how initial conditions affect the radial evolution of solar wind disturbances associated with overexpanding CMES. We find good qualitative agreement between the results of our simulations and Ulysses observations of such disturbances.

Gosling, J. T.↗

DOE OSTI2021

Dynamics and energy coupling of gas puff Z-pinches on a fast linear transformer driver

Gas puff Z-pinch experiments with annular Ar and Ne gas shells have been conducted on the Compact Experimental System for Z-pinch and Ablation Research (CESZAR) linear transformer driver (LTD) with 500 kA current and 160 ns rise time. Here, we present results from the first systematic gas puff Z-pinch experiments using a fast (≤ 200 ns) LTD as a driver, in which we show that 7% of the stored energy in the capacitors is coupled to plasma kinetic energy as estimated via self-emission and laser schlieren images. 0D and 1D simulations—which do not allow instability growth and thus reach greater maximum average velocities—using initial conditions inferred from experimental implosion trajectories predict coupling in excess of 10% of the stored energy. Additionally, the Ar and Ne implosions were comparably massed and thus achieved similar maximum kinetic energies, though the Ne pinches were more stable and the x-ray pulses were longer and produced higher yield: 2–5 ns and 0.21–0.52 J (0.15–0.37 J/cm) of Ar K-shell and 12–25 ns and 2.2–3.9 J (1.6–2.6 J/cm) of Ne K-shell, respectively. The difference in stability is most likely attributed to variations in initial conditions such as density distribution and gas breakdown initiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Field-level reconstruction from foreground-contaminated 21-cm maps

Current and upcoming 21-cm experiments will soon be able to map 21-cm spatial fluctuations in three dimensions for a wide range of redshifts. However, bright foreground contamination and the nature of radio interferometry create significant challenges, making it difficult to access rich cosmological information from the Fourier modes that lie within the “foreground wedge”. Here, in this work, we introduce two approaches aiming to reconstruct the full 21-cm density field, including the missing modes in the wedge: (a) a field-level inference under an effective field theory (EFT) framework; (b) a diffusion-based deep generative model trained on simulations. Under the EFT framework, we implement a fully differentiable forward model that maps the initial conditions of matter fluctuations to the observed, foreground-filtered 21-cm maps. This enables a gradient-based sampler to simultaneously sample the initial conditions and bias parameters, allowing a physically motivated mode reconstruction. Alternatively, we apply a variational diffusion model to perform 21-cm density reconstruction at the map level. Our model is trained on semi-numerical simulations over a wide range of astrophysical parameters. Our results from both approaches should provide improved cosmological constraints from the field level and also enable cross-correlation between experiments that have little or no overlapping modes.

cosmological perturbation theory↗

NASA NTRS1984

The utilization of Seasat-A data in numerical weather prediction

The present paper provides the results from several numerical experiments which have been conducted in cases in which SASS (Seasat-A Satellite Scatterometer) winds were either included or excluded. Global scale experiments are discussed along with a regional area model. The regional model is essentially that described by Duffy (1981). A description of the initial conditions used in the regional model experiment is also provided. It is found that Seasat-A data can be important in defining the initial conditions which results in rapid maritime cyclogenesis. Currently conducted work is concerned with the development of a higher horizontal and vertical resolution global model, with an improved planetary boundary layer parameterization.

Duffy, D. G.↗

DOE OSTI2023

Semi-Annual Report for Horizontal Compact High Temperature Gas Reactor (HC-HTGR) Development during Performance Period April 2023 – September 2023

Horizontal Compact High Temperature Gas Reactor (HC-HTGR) is being designed by a multi-disciplinary team of nuclear, mechanical, and structural engineers under the support of a DOE-NE Advanced Reactor Demonstration Program’s Advanced Reactor Concepts-20 (ARC-20) award. The objective of this ARC-20 project is to deliver a conceptual design for the proposed HC-HTGR in 3 years and support its commercialization as a safe, low-cost HTGR. Argonne National Laboratory (Argonne) is responsible for the design and analysis of the reactor cavity cooling system (RCCS) as a safety system for passive decay heat removal of the reactor concept. Additionally, Argonne is providing analysis of the primary coolant system to ensure temperatures within the core remain below safety margins during steady-state and potential accident scenarios. This fourth semi-annual report summarized the progress made at Argonne on the two tasks during the second half of FY23. As a part of the RCCS design task, recent efforts have been made to complete a conceptual design of the RCCS for the HC-HTGR, including the design update of the water panel and system configuration favorable in point of view of fabrication and system operation. Design calculations were conducted under various heat load conditions to validate the system design. Transient simulations using RELAP5-3D were conducted to investigate system dynamics under transients of interest and to evaluate the system performance in the design condition. The results demonstrated the overall system feasibility that the RCCS design maintains structures temperatures lower than maximum allowable temperature with sufficient system inventory without any active heat sink. In the primary system thermal hydraulics task, the preliminary analysis was performed for a long term pressurized conduction cooldown (PCC) transient. This analysis used a combination of a fully resolved and coarse homogenized mesh to predict the temperature distribution for the steady-state initial condition and the PCC transient. The steady-state initial condition was determined using a fully resolved full core model with 3D solid to 1D fluid coupling. The fully resolved mesh was also used to model the first 20 seconds of the PCC. The temperature difference between fuel pins and the graphite matrix becomes minimal and the dominant heat transfer shifts to a larger scale radially towards the RCCS. After 20 seconds, a homogenized coarse mesh is used, greatly reducing the computational costs of the model. These results demonstrate that the core is designed to passively remove enough decay heat in a protected loss of primary coolant flow to prevent an unsafe rise of core temperatures.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗