Search NASA⌕ Search

SEARCH · Search NASA

Results for “interdiffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Quantifying mixing using equilibrium reactions

A method of quantifying equilibrium reactions in a microchannel using a fluorometric reaction of Fluo-4 and Ca{sup 2+} ions is presented. Under the proper conditions, equilibrium reactions can be used to quantify fluid mixing without the challenges associated with constituent mixing measures such as limited imaging spatial resolution and viewing angle coupled with three-dimensional structure. Quantitative measurements of CaCl and calcium-indicating fluorescent dye Fluo-4 mixing are measured in Y-shaped microchannels. Reactant and product concentration distributions are modeled using Green's function solutions and a numerical solution to the advection-diffusion equation. Equilibrium reactions provide for an unambiguous, quantitative measure of mixing when the reactant concentrations are greater than 100 times their dissociation constant and the diffusivities are equal. At lower concentrations and for dissimilar diffusivities, the area averaged fluorescence signal reaches a maximum before the species have interdiffused, suggesting that reactant concentrations and diffusivities must be carefully selected to provide unambiguous, quantitative mixing measures. Fluorometric equilibrium reactions work over a wide range of pH and background concentrations such that they can be used for a wide variety of fluid mixing measures including industrial or microscale flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Annealing of self-assembled InAs/GaAs quantum dots: A stabilizing effect of beryllium doping

We investigated the effects of postgrowth thermal annealing on optical properties of beryllium-doped InAs quantum dot (QD) heterostructures grown by molecular beam epitaxy. Thermal annealing induced a blueshift of up to 200 meV in light emission from an undoped sample, while a sample having GaAs layer heavily doped with beryllium on top of the QD region exhibited a much smaller blueshift. This phenomenon is interpreted as due to suppression of annealing-induced In/Ga interdiffusion.

36 MATERIALS SCIENCE↗

Magnetic phases and structural properties in Co/Ru superlattices

We report studies by x-ray diffraction, ferromagnetic resonance (FMR), and x-ray magnetic circular dichroism (XMCD) in Co/Ru superlattices grown by magnetron sputtering. We studied the [Co(50 A)/Ru(t{sub Ru})]{sub 20} samples, which were deposited at room temperature on Si substrates with the Ru thicknesses, t{sub Ru}, varying between 9 and 33 A. The main and secondary uniform absorption modes, observed in the FMR spectra, are associated with the Co/Ru interfaces and the bulk Co regions, respectively. The main mode becomes more intense than the secondary one for increasing t{sub Ru}. This is attributed to the roughness and/or atomic interdiffusion, which leads, with increasing t{sub Ru}, to an increasing volume of Co/Ru interfacial regions and a decreasing volume of pure Co regions. The XMCD measurements provide Co spin magnetic moments lower than the bulk Co value, confirming the presence of a Co magnetic region with a lower local effective magnetization attributed to the Co/Ru interfaces.

36 MATERIALS SCIENCE↗

Magnetic, dielectric, magnetoelectric, and microstructural studies demonstrating improved magnetoelectric sensitivity in three-phase BaTiO{sub 3}-CoFe{sub 2}O{sub 4}-poly(vinylidene-fluoride) composite

A three-phase BaTiO{sub 3}-CoFe{sub 2}O{sub 4}-poly(vinylidene-fluoride) (BT-CF-PVDF) particulate composite showing a maximum magnetoelectric voltage coefficient alpha{sub E33}approx26 mV/cm Oe, at a small applied magnetic field H{sub DC}=263 Oe, has been demonstrated in this work. Large magnetoelectric response in this composite (particulate BT-CF embedded in PVDF matrix) is possibly a result of the effective mechanical interaction between CF and BT through the PVDF matrix. Processing temperatures for composite preparation are low, ensuring no chemical reaction or interdiffusion between the atoms of piezoelectric and magnetostrictive phases, leading to large value of magnetoelectric voltage coefficient. Detailed measurements of dielectric, magnetic, and static magnetoelectric data are reported. Peak in the dielectric spectrum is shown to correlate with the buildup of magnetization in the composite. Although the M-H loop gives M{sub s}, M{sub r}, and H{sub c} (=37.2 emu/g, 16.4 emu/g, and 830 Oe, respectively) in accordance with the expected values (wt % of CF in the composite is 52.5%), the overall magnetic behavior of the composite is identified as 'spin glass'.

36 MATERIALS SCIENCE↗

Oxygen migration in TiO{sub 2}-based higher-k gate stacks

We report on the stability of high-permittivity (high-k) TiO{sub 2} films incorporated in metal-oxide-silicon capacitor structures with a TiN metal gate electrode, focusing on oxygen migration. Titanium oxide films are deposited by either Ti sputtering [physical vapor deposition (PVD)] followed by radical shower oxidation or by plasma-enhanced atomic layer deposition (PEALD) from titanium isopropoxide (Ti{l_brace}OCH(CH{sub 3}){sub 2{r_brace}4}) and O{sub 2} plasma. Both PVD and PEALD films result in near-stoichiometric TiO{sub 2} prior to high-temperature annealing. We find that dopant activation anneals of TiO{sub 2}-containing gate stacks at 1000 deg. C cause 5 A or more of additional SiO{sub 2} to be formed at the gate-dielectric/Si-channel interface. Furthermore, we demonstrate for the first time that oxygen released from TiO{sub 2} diffuses through the TiN gate electrode and oxidizes the poly-Si contact. The thickness of this upper SiO{sub 2} layer continues to increase with increasing TiO{sub 2} thickness, while the thickness of the regrown SiO{sub 2} at the gate-dielectric/Si interface saturates. The upper SiO{sub 2} layer degrades gate stack capacitance, and simultaneously the oxygen-deficient TiO{sub x} becomes a poor insulator. In an attempt to mitigate O loss from the TiO{sub 2}, top and bottom Al{sub 2}O{sub 3} layers are added to the TiO{sub 2} gate dielectric as oxygen barriers. However, they are found to be ineffective, due to Al{sub 2}O{sub 3}-TiO{sub 2} interdiffusion during activation annealing. Bottom HfO{sub 2}/Si{sub 3}N{sub 4} interlayers are found to serve as more effective oxygen barriers, reducing, though not preventing, oxygen downdiffusion.

36 MATERIALS SCIENCE↗

Gigantic uphill diffusion during self-assembled growth of Ge quantum dots on strained SiGe sublayers

Raman spectroscopy and atomic-force microscopy were applied to study the morphology of nanoislands grown on strained Si{sub 1-x}Ge{sub x} sublayers. It was shown that the growth of nanoislands on strained Si{sub 1-x}Ge{sub x} sublayer not only induces the effect of their spatial ordering but also enhances the role of interdiffusion processes. Unusual high island volume increase during the epitaxy is explained by anomalous strong material diffusion from the sublayer into the islands, induced by nonuniform field of elastic strains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Note: X-ray radiography for measuring chemical diffusion in metallic melts

A x-ray radioscopy technique for measuring in situ chemical diffusion coefficients in metallic melts is presented. The long-capillary diffusion measurement method is combined with imaging techniques using microfocus tubes and flat panel detectors in order to visualize and quantitatively analyze diffusive mixing of two melts of different chemical composition. The interdiffusion coefficient as function of temperature and time is obtained by applying Fick's diffusion laws. Tracking the time dependence of the mean square penetration depth of the mixing process allows to detect changes in the mass transport caused by convective flow. The possibility to sort out convective mass transport contributions from analysis enhances significantly the accuracy compared to the conventional long-capillary diffusion measurement method with postmortem analysis. The performance of this novel diffusion measurement method with x-ray radiography technique is demonstrated by a diffusion experiment in an Al-Ni melt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-Ray And Polarized Neutron Reflectometry: Characterization Of Si/Co/Si And Si/Ni/Si Systems

Technologically important metal silicides formed through interdiffusion in metal/Si systems has been probed using two complementary techniques viz. x-ray reflectivity (XRR) and polarized neutron reflectivity (PNR). Both structural and magnetic characterization with good depth resolution has been achieved in these systems. We have studied two systems Si/Co/Si and Si/Ni/Si which relate to important applications in ferromagnetic/ non-magnetic semiconductor layered structures for memory devices.

36 MATERIALS SCIENCE↗

FePt:C/Fe graded and nongraded films with controllable coercivity fabricated by magnetron sputtering and postannealing

Graded and nongraded FePt:C(hard)/Fe(soft) films with different structures are fabricated by magnetron sputtering and postannealing. Due to the interdiffusion between FePt and C layers during the annealing process, films with a continuous variation in anisotropy are realized by varying the C concentration in the FePt hard layer. In comparison to the FePt/Fe bilayer, the coercivities of graded and nongraded films are effectively reduced. However, the mechanisms of reduction are different. Moreover, adding a nonmagnetic C layer not only tailors the gradient of anisotropy, but also weakens the intergranular exchange interaction.

36 MATERIALS SCIENCE↗

Preparation and Characterization of Ultrathin Stainless Steel Films

We report on the preparation of polycrystalline austenitic 310 ({sup 57}Fe{sub 0.55}Cr{sub 0.25}Ni{sub 0.20}) stainless steel (SS) thin films on Si substrates and the characterization of their residual magnetism via {sup 57}Fe conversion-electron Moessbauer spectroscopy (CEMS). The films were structurally characterized at room temperature by X-ray diffraction (XRD). The virgin films were found to be structurally disordered. Subsequent annealing at moderate temperatures in ultrahigh vacuum produces the ordered martensitic and austenitic SS phases. Further annealing at higher temperatures (up to temperatures where long-range diffusion into the substrate is still weak) transforms the films into the austenitic phase with no trace of a magnetic hyperfine interaction. However, when a 2 nm thick SS thin film is embedded between two carbon layers, the as prepared disordered SS film does not transform to the martensitic or austenitic SS phase irrespective of the annealing temperature, probably because the interdiffusion with C prohibits the formation of these phases.

36 MATERIALS SCIENCE↗

Fe/Si(001) Ferromagnetic Layers: Reactivity, Local Atomic Structure and Magnetism

Ultrathin ferromagnetic Fe layers on Si(001) have recently been synthesized using the molecular beam epitaxy (MBE) technique, and their structural and magnetic properties, as well as their interface reactivity have been investigated. The study was undertaken as function of the amount of Fe deposited and of substrate temperature. The interface reactivity was characterized by Auger electron spectroscopy (AES). The surface structure was characterized by low-energy electron diffraction (LEED). The magnetism was investigated by magneto-optical Kerr effect (MOKE). A higher deposition temperature stabilizes a better surface ordering, but it also enhances Fe and Si interdiffusion and it therefore decreases the magnetism. Despite the rapid disappearance of the long range order with Fe deposition at room temperature, the material exhibits a significant uniaxial in-plane magnetic anisotropy. For the Fe deposition performed at high temperature (500 deg. C), a weak ferromagnetism is still observed, with saturation magnetization of about 10% of the value obtained previously. MOKE studies allowed inferring the main properties of the distinct formed layers.

36 MATERIALS SCIENCE↗

The Protocol Of KFM Characterization On Cross-section Of CdS/CdTe Thin Film Solar Cell

In this work, we report a series of Kelvin Force Microscopy (KFM) measurements, suitable to observe the topography and the contact potential difference (CPD) distribution of the following stack: CdTe/CdS/ITO/glass. The sample is prepared by mechanical polishing after cleavage to decrease the roughness. In order to have a better understanding of the charge transport inside the solar cell and to vary the Fermi level pinning effect, different bias are applied to the sample. The CPD variations with different bias on cross-section in dark condition are presented. We observe the reverse bias widens the CdTe/CdS depletion region. Under illumination, electron and holes are generated near the interface and varies the CPD distribution. Additionally, the chemical composition of each layer has been investigated by nano-Auger electron spectroscopy (AES). We observe the interdiffusion at the CdTe/CdS interface and determine the composition of the active layers to be CdTe/CdS{sub 0.7}Te{sub 0.3}.

14 SOLAR ENERGY↗

Magnetic reconnection in space

Models of magnetic reconnection in space plasmas generally consider only a segment of the magnetic field lines. The consideration of only a segment of the lines is shown to lead to paradoxical results in which reconnection can be impossible even in a magnetic field constrained to be curl free or can be at an Alfven rate even when the plasma is a perfect conductor. A model of reconnecting magnetic fields is developed which shows the smallness of the interdiffusion distance {delta}{sub d} of magnetic field lines does not limit the speed of reconnection but does provide a reconnection trigger. When the reconnection region has a natural length L{sub r}, the spatial scale of the gradient of magnetic field across the magnetic field lines must reach L{sub g} Almost-Equal-To 0.3L{sub r}/ln(L{sub r}/{delta}{sub d}) for fast reconnection to be triggered, which implies a current density j Almost-Equal-To B/{mu}{sub 0}L{sub g} that is far lower than that usually thought required for fast reconnection. The relation between magnetic reconnection in space and in toroidal laboratory plasmas is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves using Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) Heusler alloy

We have studied the structure and magnetoresistive properties of polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves (PSVs) with Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) (CMGG) ferromagnetic layers and a Ag spacer. With (110) textured CMGG thin films and (111) textured Ag spacer, the PSVs annealed at 350 °C with 2 nm CoFe buffer layers showed ΔRA of 3.7 mΩ μm{sup 2} and MR ratio of 12.2%, while the PSVs without the buffer layer showed ΔRA of only 1.3 mΩ μm{sup 2}. High angle angular dark field images showed that the drop of ΔRA by annealing was due to the deterioration of the multi-layer CMGG/Ag/CMGG structure. Energy-dispersive X-ray spectroscopy images further confirmed the interdiffusion between CMGG layer and the Ag layer outside the CMGG/Ag/CMGG trilayer. In addition, we discuss the difference in the magnetoresistive properties of polycrystalline and epitaxial PSVs.

36 MATERIALS SCIENCE↗

Morphological stability of Cu-Nb nanocomposites under high-energy collision cascades

We use molecular dynamics and phase field simulations to demonstrate that Cu-Nb multilayered nanocomposites with individual layer thicknesses above 2–4 nm remain morphologically stable when subjected to 100 keV collision cascades, characteristic of neutron or heavy ion irradiation. The probability of morphological instability rapidly increases as the layer thickness decreases to 1 nm, which we attribute to overlap of zones of liquid-like interdiffusion inside radiation-induced thermal spikes at neighboring interfaces in the multilayer.

36 MATERIALS SCIENCE↗

Enhancement of exchange bias and training effect in ion-beam sputtered Fe{sub 46}Mn{sub 54}/Ni{sub 81}Fe{sub 19} bilayers

We present a remarkable enhancement by 300% of the exchange-bias field at room temperature, without affecting the coercivity value, via optimum magnetic annealing (250 °C/3 kOe) in ion-beam sputtered FeMn(30 nm)/NiFe(10 nm) bilayers. This specific behavior has been attributed to a higher degree of γ-FeMn(111) orientation that offers more interfacial FeMn moments to get pinned with the moments of the adjacent NiFe layer. Unlike the absence of training effect at room temperature, a pronounced training effect and an accompanying magnetization reversal asymmetry are evidenced upon field cooling below 50 K due to the presence of biaxial exchange induced anisotropy across the interdiffused FeMn/NiFe interface. The present findings not only have technological significance but also are of relevance to the understanding of interfacial spin disorder and frustration in these exchange-biased systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two dimensional growth of ultrathin Fe films on BaTiO{sub 3} with sharp chemical interface

The Fe/BaTiO{sub 3} interface is a prototypical artificial multiferroic system displaying purely electronic magnetoelectric effects at room temperature. As magneto-electric coupling is essentially localized at the interface, the properties of the very first Fe layers in contact with BaTiO{sub 3} play a major role. In this paper, we investigate, by using X-ray photoemission spectroscopy and photoelectron diffraction, the in-situ growth, by molecular beam epitaxy, of ultrathin Fe films (∼7 monolayers) on a BaTiO{sub 3}/SrTiO{sub 3}(001) template. We found that growing the Fe films above room temperature (373 K) is essential in order to avoid island growth and obtain a continuous film. Post-annealing up to 473 K improves the film crystallinity but prevents chemical interdiffusion and roughening. Just an interfacial monolayer of oxidized iron is detected in these conditions, which appears as an unavoidable consequence of the Fe/BaTiO{sub 3} chemical interaction. Its active role in magnetoelectric coupling must be carefully taken into account to correlate theoretical predictions and experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial growth of VO{sub 2} by periodic annealing

We report the growth of ultrathin VO{sub 2} films on rutile TiO{sub 2} (001) substrates via reactive molecular-beam epitaxy. The films were formed by the cyclical deposition of amorphous vanadium and its subsequent oxidation and transformation to VO{sub 2} via solid-phase epitaxy. Significant metal-insulator transitions were observed in films as thin as 2.3 nm, where a resistance change ΔR/R of 25 was measured. Low angle annular dark field scanning transmission electron microscopy was used in conjunction with electron energy loss spectroscopy to study the film/substrate interface and revealed the vanadium to be tetravalent and the titanium interdiffusion to be limited to 1.6 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗