Search NASA⌕ Search

SEARCH · Search NASA

Results for “lead”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Lead isotopic compositions of airborne particulates collected from snow and from dry deposition in the East River Watershed, Colorado and at the Southern Sierra Critical Zone Observatory, California

The data set consists of lead (Pb) isotopic ratios (206Pb/207Pb and 208Pb/207Pb, as well as 206Pb/204Pb, 207Pb/204Pb, 208Pb/204Pb) for particulate samples collected from snow and dry deposition. This was part of a study (O’Day et al. 2020) that was looking at the speciation of phosphorous in splits of these samples to evaluate the flux and bio-availability of phosphorous to the mountain sites in the study. The Pb isotopic data allow sourcing of long-range transported Pb, specifically the fraction of Pb sourced in Asia, and so a comparison of the relative distances of PM sources between the high and low elevation sites. Samples were collected at the East River Watershed, CO (dry deposition collected over Sept.-Oct. 2016, show sampling winter 2017) and at the Southern Sierra Critical Zone Observatory (dry deposition collected over Sept-Nov 2016, July-Sept 2017, June-July 2017). The data includes Pb concentration data, as well as calculated fraction of the Pb sourced in Asia. This data set was published in part in O’Day et al. (2020) Phosphorus Speciation in Atmospherically Deposited Particulate Matter and Implications for Terrestrial Ecosystem Productivity. ES&T, https://dx.doi.org/10.1021/acs.est.9b06150

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Modeling of Combined Lead Fast Reactor and Concentrating Solar Power Supercritical Carbon Dioxide Cycles to Demonstrate Feasibility, Efficiency Gains, and Cost Reductions

Solar power has innate issues with weather, grid demand and time of day, which can be mitigated through use of thermal energy storage for concentrating solar power (CSP). Nuclear reactors, including lead-cooled fast reactors (LFRs), can adjust power output according to demand; but with high fixed costs and low operating costs, there may not be sufficient economic incentive to make this worthwhile. We investigate potential synergies through coupling CSP and LFR together in a single supercritical CO 2 Brayton cycle and/or using the same thermal energy storage. Combining these cycles allows for the LFR to thermally charge the salt storage in the CSP cycle during low-demand periods to be dispatched when grid demand increases. The LFR/CSP coupling into one cycle is modeled to find the preferred location of the LFR heat exchanger, CSP heat exchanger, sCO 2 -to-salt heat exchanger (C2S), turbines, and recuperators within the supercritical CO 2 Brayton cycle. Three cycle configurations have been studied: two-cycle configuration, which uses CSP and LFR heat for dedicated turbocompressors, has the highest efficiencies but with less component synergies; a combined cycle with CSP and LFR heat sources in parallel is the simplest with the lowest efficiencies; and a combined cycle with separate high-temperature recuperators for both the CSP and LFR is a compromise between efficiency and component synergies. Additionally, four thermal energy storage charging techniques are studied: the turbine positioned before C2S, requiring a high LFR outlet temperature for viability; the turbine after the C2S, reducing turbine inlet temperature and therefore power; the turbine parallel to the C2S producing moderate efficiency; and a dedicated circulator loop. While all configurations have pros and cons, use of a single cycle offers component synergies with limited efficiency penalty. Using a turbine in parallel with the C2S heat exchanger is feasible but results in a low charging efficiency, while a dedicated circulator loop offers flexibility and near-perfect heat storage efficiency but increasing cost with additional cycle components.

14 SOLAR ENERGY↗
DOE OSTI2020

Low-Income Energy Affordability Data (LEAD) Tool

This resource summary covers the Low-Income Energy Affordability Data (LEAD) Tool, which helps stakeholders make data-driven decisions on energy goals and program planning by improving their understanding of low-income and moderate-income household energy characteristics.

Low-Income Energy Affordability Data Tool, LEAD To↗
DOE OSTI2022

Conceptual design of inverted core lead bismuth eutectic fast reactor for marine applications

The development of an inverted core fast reactor aims to generate 60 MWth for about 30 Effective Full Power Years without refueling. The reactor design is a transportable reactor using UO{sub 2} fuel and lead-bismuth-eutectic cooled designed for marine applications and is intended to improve the reactor performances compared to the normal core design: better condition for passive cooling system capability by lower core pressure drop, taking advantage of potential power uprate from the lower maximum fuel temperature. Systematic design processes are presented in this work: fuel pin geometry selection, fuel assembly (FA) design, and core design. A relationship between pressure drops, coolant velocity, maximum fuel temperature, coolant channel diameter, and fuel volume fraction was introduced in a single graph used as a tool to select fuel pin geometry. Fuel fabrication capability also took place in consideration of FA design which led to 7 holes per FA, and two-dimensional temperature distribution studies were also carried out. Core design processes including radial zoning, axial zoning, and core optimization were conducted using Monte Carlo code MCS, which is UNIST CORE laboratory in-house code. The current core design uses 3 fuel enrichment levels and 3 FA types to control the local power distribution and power shift during its lifetime. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Feasibility of lead-bismuth-cooled fast reactor with fuel shuffling strategy

This paper investigates the feasibility of fuel shuffling of the Advanced Nitride-fueled Simplified 100 MWe (ANTS-100e) Lead-bismuth-cooled Fast Reactor (LFR). The preliminary design has the active core of 235 cm in diameter and 100 cm high. The core is composed of 138 hexagonal fuel assemblies enclosed with a 15-15Ti steel duct. The core adopts the onion zoning with the two zones of low-enriched uranium for a better breeding capability to maximize the first cycle length to 10 effective full-power years (EFPYs). The fuel shuffling study is performed by using the UNIST in-house Monte Carlo code MCS. The neutronic parameters such as the multiplication factor and burnup are being investigated. The fuel shuffling strategy is evaluated through several loading patterns for flattening radial power distribution. It is also found that the core with fuel shuffling could lengthen the core lifetime by more than 5 EFPYs without introducing fresh fuel. Thus, it appears that the ANTS-100e can be principally designed to have the second cycle with another 10 EFPYs if introducing fresh fuel into the core. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2019

Re-Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium-Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

Silicon is a promising anode material for lithium-ion batteries with its superior capacity. However, the drastic volume changes during lithiation/delithiation cycles hinder the cycling performance, resulting in particle pulverization, conductivity loss, and an unstable electrode-electrolyte interface. In this work, a series of synthetic polymeric binders, poly(acrylic acid-co-tetra(ethylene glycol) diacrylate)-featuring a poly(acrylic acid) (PAA) backbone branched via tetra(ethylene glycol) diacrylate (TEGDA)-are developed that edge toward evidencing well-balanced properties to confront capacity fading in Si-based electrodes. The incorporation of ether chain not only leads to the branching architecture of the PAA backbone, thus affecting its mechanical properties, but also promotes the conductivity of Li ions. As a result, a synergistic performance improvement is observed in both half and full cells. The best-performing cell using a branched PAA binder (bPAA) with a feeding molar ratio ([TEGDA]:[acrylic acid(AA)]) of 0.2 results in a 10% increase in initial capacity and a 31% increase in capacity retention over 100 cycles compared to the linear PAA cell. The cross-sectional microscopic images of the cycled electrodes reveal that bPAA binders can drastically reduce the electrode expansion. This improvement results from the well-balanced properties of the polymer design, which could guide further development for more advanced binder materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Atmospheric Humidity Underlies Irreproducibility of Formamidinium Lead Iodide Perovskites

Metal halide perovskite solar cells (PSCs) are infamous for their batch-to-batch and lab-to-lab irreproducibility in terms of stability and performance. Reproducible fabrication of PSCs is a critical requirement for market viability and practical commercialization. PSC irreproducibility plagues all levels of the community; from institutional research laboratories, start-up companies, to large established corporations. Here, in this work, the critical function of atmospheric humidity to regulate the crystallization and stabilization of formamidinium lead triiodide (FAPbI 3 ) perovskites is unraveled. It is demonstrated that the humidity content during processing induces profound variations in perovskite stoichiometry, thermodynamic stability, and optoelectronic quality. Almost counterintuitively, it is shown that the presence of humidity is perhaps indispensable to reproduce phase-stable and efficient FAPbI 3 -based PSCs.

14 SOLAR ENERGY↗
DOE OSTI2020

Methylammonium Lead Tribromide Single Crystal Detectors towards Robust Gamma-Ray Photon Sensing

In recent years, hybrid perovskite single crystalline solid-state detectors have shown promise in γ-ray spectroscopy. Here, the γ-ray photon induced electrical pulses are investigated, which are produced by perovskite solid-state detectors made with the commonly used methylammonium lead tribromide crystals with chlorine incorporation. Under low electric field detector operation, slow pulses generated by γ-rays with average rise times of 65 µs are observed, which decreases to 20 µs when a higher electrical field of 500 V cm -1 is applied. However, the baseline becomes noisy quickly, which prevents collection of clean pulses for spectra construction. Further, by systematically measuring the temperature dependence and current–voltage characteristics, such instability is attributed to the local ion migration under electrical field creating a fluctuating dark noise, which presents a major challenge in perovskite γ-ray detector technologies. It is demonstrated that cycling the bias between positive and negative polarity can stabilize the detector, allowing for longer periods of pulse accumulation for generating energy resolved spectra with resolutions of ≈35% at 59.6 keV and ≈25% at 662 keV at room temperature. The study indicates that the main limiting factors of perovskite-based γ-ray detectors are slow rise times and bias instability. Finally, these challenges must be properly addressed to achieve reproducible, high-resolution γ-ray detection.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Polaron and Spin Dynamics in Organic–Inorganic Lead Halide Perovskite Nanocrystals

Long-lived carrier population and spin-based behavior in lead halide perovskite nanocrystals (NCs) are very interesting for implementing photovoltaic devices with efficiencies exceeding the Shockley–Queisser limit and quantum information processing, respectively. However, a comprehensive understanding of polaron-mediated charge carrier interactions and an accurate description of the spin-polarized states for spintronics are still lacking. Herein, the carrier and spin interactions are studied under controlled conditions in FAPbI 3 and Cs 0.01 FA 0.99 Pb(Br 0.11 I 0.89 ) 3 NCs through ultrafast transient absorption (TA) spectroscopy. At early timescales, TA spectrum shows an asymmetric derivative feature originating from the hot carrier-induced spectral redshift in FAPbI 3 NCs (55 ± 3 meV) and Cs0.01FA0.99Pb(Br0.11I0.89)3 NCs (54 ± 2 meV) at the bandedges that stabilizes to 9 ± 1 and 11 ± 2 meV, respectively, at 1 ps due to the polaron formation. The kinetic analysis indicates that the polaron populations in FAPbI3 and Cs 0.01 FA 0.99 Pb(Br 0.11 I 0.89 ) 3 NCs decay with an average lifetime of 657 ± 34 and 532 ± 28 ps, respectively. The circular polarization-resolved TA reveals that polaron formation can control spin relaxation in NCs, thus providing a powerful tool to explore the development of their prospective applications in spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strong Induced Circular Dichroism in a Hybrid Lead‐Halide Semiconductor Using Chiral Amino Acids for Crystallite Surface Functionalization

Abstract Chirality is a desired property in functional semiconductors for optoelectronic, catalytic, and spintronic applications. Here, introducing enantiomerically‐pure 3‐aminobutyric acid (3‐ABA) into thin films of the 1D semiconductor dimethylammonium lead iodide (DMAPbI 3 ) is found to result in strong circular dichroism (CD) in the optical absorption. X‐ray diffraction and grazing incidence small angle X‐ray scattering (GISAXS) are applied to gain molecular‐scale insights into the chirality transfer mechanism, which is attributed to a chiral surface modification of DMAPbI 3 crystallites. This study demonstrates that the CD signal strength can be controlled by the amino‐acid content relative to the crystallite surface area. The CD intensity is tuned by the composition of the precursor solution and the spin‐coating time, thereby achieving anisotropy factors ( g abs ) as high as 1.75 × 10 –2 . Grazing incidence wide angle scattering reveals strong preferential ordering that can be suppressed via tailored synthesis conditions. Different contributions to the chiroptical properties are resolved by a detailed analysis of the CD signal utilizing an approach based on the Mueller matrix model. This report of a novel class of chiral hybrid semiconductors with precise control over their optical activity presents a promising approach for the design of circularly polarized light detectors and emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Incorporating Potassium Citrate to Improve the Performance of Tin‐Lead Perovskite Solar Cells

Abstract Easy‐to‐form tin vacancies at the buried interface of tin‐lead perovskites hinder the performance of low‐bandgap perovskite solar cells (PSCs). Here, a synergistic strategy by incorporating potassium citrate (PC) into the poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hole‐transport layer to passivate the buried interface of Sn‐Pb PSCs is reported. PC neutralizes the acidity of PEDOT:PSS and stabilizes the perovskite front surface, enhancing device stability. Citrate moieties coordinate with Sn 2+ on the buried perovskite surface, preventing Sn 2+ oxidation and suppressing defect formation. Additionally, potassium cations incorporate into Sn‐Pb perovskites, enhancing crystallinity and passivating halide defects. The combined benefits enable efficient low‐bandgap Sn‐Pb PSCs with a power conversion efficiency of 22.7% and a high open‐circuit voltage of 0.894 V. Using this method, 26.1% efficiency for all‐perovskite tandem solar cells is demonstrated. These results emphasize the significance of buried interface passivation in developing efficient and stable Sn‐Pb PSCs and all‐perovskite tandem solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Pressure‐Suppressed Carrier Trapping Leads to Enhanced Emission in Two‐Dimensional Perovskite (HA) 2 (GA)Pb 2 I 7

Abstract A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA) 2 (GA)Pb 2 I 7 (HA= n ‐hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non‐luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above‐band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two‐fold higher PL emission compared with the pristine (HA) 2 (GA)Pb 2 I 7 .

Guo, Songhao↗
DOE OSTI2024

3D Lead-Organoselenide-Halide Perovskites and their Mixed-Chalcogenide and Mixed-Halide Alloys

Here, we incorporate Se into the 3D halide perovskite framework using the zwitterionic ligand: SeCYS ( + NH 3 (CH 2 ) 2 Se - ), which occupies both the X - and A + sites in the prototypical ABX 3 perovskite. The new organoselenide-halide perovskites: (SeCYS)PbX 2 (X=Cl, Br) expand upon the recently discovered organosulfide-halide perovskites. Single-crystal X-ray diffraction and pair distribution function analysis reveal the average structures of the organoselenide-halide perovskites, whereas the local lead coordination environments and their distributions were probed through solid-state 77 Se and 207 Pb NMR, complemented by theoretical simulations. Density functional theory calculations illustrate that the band structures of (SeCYS)PbX 2 largely resemble those of their S analogs, with similar band dispersion patterns, yet with a considerable band gap decrease. Optical absorbance measurements indeed show band gaps of 2.07 and 1.86 eV for (SeCYS)PbX 2 with X=Cl and Br, respectively. We further demonstrate routes to alloying the halides (Cl, Br) and chalcogenides (S, Se) continuously tuning the band gap from 1.86 to 2.31 eV–straddling the ideal range for tandem solar cells or visible-light photocatalysis. The comprehensive description of the average and local structures, and how they can fine-tune the band gap and potential trap states, respectively, establishes the foundation for understanding this new perovskite family, which combines solid-state and organo-main-group chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Impact of Dihedral Angle in Conjugated Organic Cation on the Structures and Properties of Organic‐Inorganic Lead Iodides

Abstract Conjugated organic cations are intriguing for organic‐inorganic halide perovskites due to their direct participation in the optoelectronic properties of hybrid materials. In conjugated cations, the dihedral angle, or torsion angle, between adjacent aromatic rings is a critical secondary structural element. This angle influences not only the shape of the cations but also the overlap between the π‐orbitals on adjacent rings, thereby affecting their electronic properties. Understanding how variations in the dihedral angle impact the structure and properties of hybrid organic‐inorganic metal halides (HOIMHs) is fundamentally important. In this study, we utilized 2,2′‐dimethyl bipyridinium as the organic cation, reacting it with PbI₂ to form hybrid lead iodides. Remarkably, variations in the dihedral angle between the two pyridinium rings resulted in the formation of two distinct crystal structures with different band gaps. Our findings demonstrate that manipulating the dihedral angle offers a novel approach to controlling the structures and properties of hybrid metal halides with conjugated cations.

Chandra Patra, Bidhan [Department of Chemistry and↗
DOE OSTI2022

Warmer incubation temperatures and later lay–orders lead to shorter telomere lengths in wood duck ( Aix sponsa ) ducklings

The environment that animals experience during development shapes phenotypic expression. In birds, two important aspects of the early-developmental environment are lay-order sequence and incubation. Later-laid eggs tend to produce weaker offspring, sometimes with compensatory mechanisms to accelerate their growth rate to catch-up to their siblings. Further, small decreases in incubation temperature slow down embryonic growth rates and lead to wide-ranging negative effects on many post-hatch traits. Recently, telomeres, non-coding DNA sequences at the end of chromosomes, have been recognized as a potential proxy for fitness because longer telomeres are positively related to lifespan and individual quality in many animals, including birds. Although telomeres appear to be mechanistically linked to growth rate, little is known about how incubation temperature and lay-order may influence telomere length. We incubated wood duck (Aix sponsa) eggs at two ecologically-relevant temperatures (34.9 and 36.2ºC) and measured telomere length at hatch and one week after. We found that ducklings incubated at the lower temperature had longer telomeres than those incubated at the higher temperature both at hatch and one week later. Further, we found that later-laid eggs produced ducklings with shorter telomeres than those laid early in the lay-sequence, although lay-order was not related to embryonic developmental rate. Furthermore, this study contributes to our broader understanding of how parental effects can affect telomere length early in life. More work is needed to determine if these effects on telomere length persist until adulthood, and if they are associated with effects on fitness in this precocial species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Soft-collinear gravity beyond the leading power

We construct “soft-collinear gravity”, the effective field theory which describes the interaction of collinear and soft gravitons with matter (and themselves), to all orders in the soft-collinear power expansion. Despite the absence of collinear divergences in gravity at leading power, the construction exhibits remarkable similarities with soft-collinear effective theory of QCD (gauge fields). It reveals an emergent soft background gauge symmetry, which allows for a manifestly gauge-invariant representation of the interactions in terms of a soft covariant derivative, the soft Riemann tensor, and a covariant generalisation of the collinear light-cone gauge metric field. The gauge symmetries control both the unsuppressed collinear field components and the inherent inhomogeneity in λ of the invariant objects to all orders, resulting in a consistent expansion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Leading-color two-loop amplitudes for four partons and a $\textit{W}$ boson in QCD

We present the leading-color two-loop QCD corrections for the scattering of four partons and a W boson, including its leptonic decay. The amplitudes are assembled from the planar two-loop helicity amplitudes for four partons and a vector boson decaying to a lepton pair, which are also used to determine the planar two-loop amplitudes for four partons and a $Z/γ^\ast$ boson with a leptonic decay. The analytic expressions are obtained by setting up a dedicated Ansatz and constraining the free parameters from numerical samples obtained within the framework of numerical unitarity. The large linear systems that must be solved to determine the analytic expressions are constructed to be in Vandermonde form. Such systems can be very efficiently solved, bypassing the bottleneck of Gaussian elimination. Our results are expressed in a basis of one-mass pentagon functions, which opens the possibility of their efficient numerical evaluation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

The LPM effect in sequential bremsstrahlung: analytic results for sub-leading (single) logarithms

Consider the in-medium splitting g → gg of a very high-energy gluon traversing a QCD medium, accounting for the Landau-Pomeranchuk-Migdal (LPM) effect. It has been known for some time that soft radiative corrections to that splitting generate a double-log correction to the splitting rate, whose effects can be absorbed into running of the medium parameter $\hat{q}$ describing the rate of transverse momentum kicks to high-energy particles due to small-angle scattering from the medium. Less has been known about sub-leading, single logarithms in this context. In this paper, we find analytic formulas for those single logs (with various caveats and clarifications).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗