Search NASA⌕ Search

SEARCH · Search NASA

Results for “loop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Observational evidence of continual heating in X-ray emitting coronal loops

A 90 s time resolution study of the soft X-ray emission from three active region loops shows the emission to be constant to about two percent over the half hour period of observation. Soft X-ray observations in two wavebands are used to deduce the temperature and density of these loops. The data unambiguously demonstrate that energy is supplied to each loop during the observations. If heating is due to discrete events, the time interval between events is shown to be less than 10 min, which is short relative to the radiative cooling time of the loops.

Gerassimenko, M.↗
NASA NTRS1978

Magnetic loops, downflows, and convection in the solar corona

Optical and extreme-ultraviolet observations of solar loop structures show that flows of cool plasma from condensations near the loop apex are a common property of loops associated with radiations whose maximum temperature is greater than approximately 7000 K and less than approximately 3,000,000 K. It is suggested that the mass balance of these structures indicates reconnection by means of plasma motion across field lines under rather general circumstances (not only after flares). It is shown that the cool material has lower gas pressure than the surrounding coronal medium. The density structure of the bright extreme ultraviolet loops suggests that downflows of cool gas result from isobaric condensation of plasma that is either out of thermal equilibrium with the local energy deposition rate into the corona, or is thermally unstable. The evidence is thought to indicate that magnetic fields act to induce a pattern of forced convection.

Foukal, P.↗
NASA NTRS1978

False lock performance of Shuttle Costas loop receivers

The false (sideband) lock problem in Shuttle Costas loop receivers, in the presence of noise, is assessed. False lock margin is defined depending on symbol signal-to-noise ratio rather than in the absence of noise. Closed-form results are given for the case where the arm filters of the Costas loop are one-pole Butterworth filters as used in the Shuttle receivers. However, the approach taken is also general enough to cover filters of arbitrary characteristics. As part of the development of the false lock margin, it is shown that the false lock phenomenon of the squaring loop is identical to that of the Costas loop.

Woo, K. T.↗
NASA NTRS1979

The stability of solar coronal loops

The stability of the 'quasi-static' models of coronal loops was examined. It was found that all models in which the heat flux at the base of the loop is assumed to vanish are unstable to the growth of thermal perturbations. The growth rates and the profiles of the unstable modes indicate that the instability involves primarily the low-temperature, transition-region plasma. The models can be made stable only by assuming that the heat flux at the base of the loop is large, of the order of 13% of the maximum flux in the loop. The results imply that the transition region must be intrinsically dynamic.

Antiochos, S. K.↗
NASA NTRS1980

Analysis of first and second order binary quantized digital phase-locked loops for ideal and white Gaussian noise inputs

Specific configurations of first and second order all digital phase locked loops are analyzed for both ideal and additive white gaussian noise inputs. In addition, a design for a hardware digital phase locked loop capable of either first or second order operation is presented along with appropriate experimental data obtained from testing of the hardware loop. All parameters chosen for the analysis and the design of the digital phase locked loop are consistent with an application to an Omega navigation receiver although neither the analysis nor the design are limited to this application.

Blasche, P. R.↗
NASA NTRS1981

Optimum design of hybrid phase locked loops

The design procedure of phase locked loops is described in which the analog loop filter is replaced by a digital computer. Specific design curves are given for the step and ramp input changes in phase. It is shown that the designed digital filter depends explicitly on the product of the sampling time and the noise bandwidth of the phase locked loop. This technique of optimization can be applied to the design of digital analog loops for other applications.

Lee, P.↗
NASA NTRS1980

The thermal statics of coronal loops

The thermal statics of constant pressure coronal loops is discussed, with particular emphasis on non-equilibrium and scaling relations. An analytical solution showing explicitly the occurrence of non-equilibrium in radiation dominated loops is presented. In addition, the general scaling law for hot loops is given. However, in view of the uncertainties in the coronal heating function and the observational determined loop parameters, it is suggested that scaling laws are currently of limited value.

Roberts, B.↗
NASA NTRS1981

Effect of self-induced magnetic force in a coronal loop transient

The distribution of the self-induced magnetic force in a section of a model coronal loop is examined and it is found that an axial current produces a pointwise magnetic force in the direction toward the axis of the loop. The direction of the pointwise magnetic force indicates that the effect of this force, acting alone, is to cause a contraction of the cross section of the magnetic loop toward the axis, but not the translation motion of the loop as a whole. It is concluded that forces other than the self-induced magnetic force, such as thermal force of pressure gradient or extra-induced magnetic force of magnetic buoyancy, must be involved in the acceleration mechanisms for the heliocentrifugal motion of coronal transients.

Yeh, T.↗
NASA NTRS1981

Carrier tracking loop performance in the presence of strong CW interference

The analyses of Bruno (1973) and Blanchard (1974, 1975) of the effects of strong radio-frequency interference on the behavior of a phase-locked loop are examined in detail. The lock constraints derived directly from a steady-state trial solution by Bruno and those derived with simplifying assumptions from the same trial solution by Blanchard are compared, and circumstances which may be accommodated by the results of Bruno but not those of Blanchard are pointed out. An explicit approximation is then derived which extends the closed-form approximation of Bruno for the loop phase error to the entire lock region. Results are illustrated for a loop filter representative of a phase-locked loop in a deep space network receiver.

Levitt, B. K.↗
NASA NTRS1982

A magnetohydrodynamic theory of coronal loop transients

The physical and geometrical characteristics of solar coronal loop transients are described in an MHD model based on Archimedes' MHD buoyancy force. The theory was developed from interpretation of coronagraphic data, particularly from Skylab. The brightness of a loop is taken to indicate the electron density, and successive pictures reveal the electron enhancement in different columns. The forces which lift the loop off the sun surface are analyzed as an MHD buoyancy force affecting every mass element by imparting an inertial force necessary for heliocentrifugal motion. Thermal forces are responsible for transferring the ambient stress to the interior of the loop to begin the process. The kinematic and hydrostatic buoyancy overcome the gravitational force, and a flux rope can then curve upward, spiralling like a corkscrew with varying cross section around the unwinding solar magnetic field lines.

Yeh, T.↗
NASA NTRS1982

Fabrication techniques for superconducting readout loops

Procedures for the fabrication of superconducting readout loops out of niobium on glass substrates were developed. A computer program for an existing fabrication system was developed. Both positive and negative resist procedures for the production of the readout loops were investigated. Methods used to produce satisfactory loops are described and the various parameters affecting the performance of the loops are analyzed.

Payne, J. E.↗
NASA NTRS1983

Correlated particle and magnetic field observations of a large-scale magnetic loop structure behind an interplanetary shock

From a survey of observations on ISEE-3, an example of correlated particle and magnetic field observations of a large-scale magnetic loop structure is presented. Bidirectional proton fluxes were observed for a period of 40 hours in the energy range 35-1600 keV approximately 12 hours after the passage of the interplanetary shock of December 11, 1980, and directly after the passage of a discontinuity. For each of the eight logarithmically spaced energy channels, a three-dimensional anisotropy analysis reveals streaming along both directions of the magnetic field. The magnetic field rotated slowly but steadily through approximately 180 deg during this same 40-hour period; this is consistent with the existence of a large-scale loop with extent greater than 0.5 AU. The observations suggest that the particles are being injected into the loop sunward of the spacecraft; they appear as bidirectional fluxes in the outermost regions of the loop arising from a combination of focusing and near scatter-free transport.

Sanderson, T. R.↗
NASA NTRS1983

Transient brightenings of interconnecting loops. III Interpretation

Two alternative interpretations of the sudden X-ray brightenings observed in loops that interconnect active regions are presented. A fast tearing mode may be excited in those newly formed interconnecting loops within which sufficient magnetic free energy is stored to drive the mode. Alternatively, anomalous Joule heating driven by an inductive electric field parallel to the magnetic field, varying on a time scale of order of a minute, may cause the brightenings. It is suggested that it is plausible that the fast tearing mode may be the cause of brightenings in the young newly formed interconnecting loops, whereas the anomalous Joule heating might occur in old loop connections when an exteral disturbance propagates through them.

Spicer, D. S.↗
NASA NTRS1983

ATOPS B-737 inner-loop control system linear model construction and verification

Nonlinear models and block diagrams of an inner-loop control system for the ATOPS B-737 Research Aircraft are presented. Continuous time linear model representations of the nonlinear inner-loop control systems are derived. Closed-loop aircraft simulations comparing nonlinear and linear dynamic responses to step inputs are used to verify the inner-loop control system models.

Broussard, J. R.↗
NASA NTRS1985

Digital Filters for Digital Phase-locked Loops

An s/z hybrid model for a general phase locked loop is proposed. The impact of the loop filter on the stability, gain margin, noise equivalent bandwidth, steady state error and time response is investigated. A specific digital filter is selected which maximizes the overall gain margin of the loop. This filter can have any desired number of integrators. Three integrators are sufficient in order to track a phase jerk with zero steady state error at loop update instants. This filter has one zero near z = 1.0 for each integrator. The total number of poles of the filter is equal to the number of integrators plus two.

Simon, M.↗
NASA NTRS1984

Numerical simulations of loops heated to solar flare temperatures. III - Asymmetrical heating

A numerical model is defined for asymmetric full solar flare loop heating and comparisons are made with observational data. The Dynamic Flux Tube Model is used to describe the heating process in terms of one-dimensional, two fluid conservation equations of mass, energy and momentum. An adaptive grid allows for the downward movement of the transition region caused by an advancing conduction front. A loop 20,000 km long is considered, along with a flare heating system and the hydrodynamic evolution of the loop. The model was applied to generating line profiles and spatial X-ray and UV line distributions, which were compared with SMM, P78-1 and Hintori data for Fe, Ca and Mg spectra. Little agreement was obtained, and it is suggested that flares be treated as multi-loop phenomena. Finally, it is concluded that chromospheric evaporation is not an effective mechanism for generating the soft X-ray bursts associated with flares.

Cheng, C.-C.↗
NASA NTRS1985

Shifting the closed-loop spectrum in the optimal linear quadratic regulator problem for hereditary systems

In the optimal linear quadratic regulator problem for finite dimensional systems, the method known as an alpha-shift can be used to produce a closed-loop system whose spectrum lies to the left of some specified vertical line; that is, a closed-loop system with a prescribed degree of stability. This paper treats the extension of the alpha-shift to hereditary systems. As infinite dimensions, the shift can be accomplished by adding alpha times the identity to the open-loop semigroup generator and then solving an optimal regulator problem. However, this approach does not work with a new approximation scheme for hereditary control problems recently developed by Kappel and Salamon. Since this scheme is among the best to date for the numerical solution of the linear regulator problem for hereditary systems, an alternative method for shifting the closed-loop spectrum is needed. An alpha-shift technique that can be used with the Kappel-Salamon approximation scheme is developed. Both the continuous-time and discrete-time problems are considered. A numerical example which demonstrates the feasibility of the method is included.

Gibson, J. S.↗
NASA NTRS1986

Closed-loop, pilot/vehicle analysis of the approach and landing task

In the case of approach and landing, it is universally accepted that the pilot uses more than one vehicle response, or output, to close his control loops. Therefore, to model this task, a multi-loop analysis technique is required. The analysis problem has been in obtaining reasonable analytic estimates of the describing functions representing the pilot's loop compensation. Once these pilot describing functions are obtained, appropriate performance and workload metrics must then be developed for the landing task. The optimal control approach provides a powerful technique for obtaining the necessary describing functions, once the appropriate task objective is defined in terms of a quadratic objective function. An approach is presented through the use of a simple, reasonable objective function and model-based metrics to evaluate loop performance and pilot workload. The results of an analysis of the LAHOS (Landing and Approach of Higher Order Systems) study performed by R.E. Smith is also presented.

Anderson, M. R.↗