Search NASA⌕ Search

SEARCH · Search NASA

Results for “low order model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Aerodynamic Performance of Scale-Model Turbofan Outlet Guide Vanes Designed for Low Noise

The design of effective new technologies to reduce aircraft propulsion noise is dependent on an understanding of the noise sources and noise generation mechanisms in the modern turbofan engine. In order to more fully understand the physics of noise in a turbofan engine, a comprehensive aeroacoustic wind tunnel test programs was conducted called the 'Source Diagnostic Test.' The text was cooperative effort between NASA and General Electric Aircraft Engines, as part of the NASA Advanced Subsonic Technology Noise Reduction Program. A 1/5-scale model simulator representing the bypass stage of a current technology high bypass ratio turbofan engine was used in the test. The test article consisted of the bypass fan and outlet guide vanes in a flight-type nacelle. The fan used was a medium pressure ratio design with 22 individual, wide chord blades. Three outlet guide vane design configurations were investigated, representing a 54-vane radial Baseline configuration, a 26-vane radial, wide chord Low Count configuration and a 26-vane, wide chord Low Noise configuration with 30 deg of aft sweep. The test was conducted in the NASA Glenn Research Center 9 by 15-Foot Low Speed Wind Tunnel at velocities simulating the takeoff and approach phases of the aircraft flight envelope. The Source Diagnostic Test had several acoustic and aerodynamic technical objectives: (1) establish the performance of a scale model fan selected to represent the current technology turbofan product; (2) assess the performance of the fan stage with each of the three distinct outlet guide vane designs; (3) determine the effect of the outlet guide vane configuration on the fan baseline performance; and (4) conduct detailed flowfield diagnostic surveys, both acoustic and aerodynamic, to characterize and understand the noise generation mechanisms in a turbofan engine. This paper addresses the fan and stage aerodynamic performance results from the Source Diagnostic Test.

Hughes, Christopher E.↗
NASA NTRS1984

Effects of dynamical heat fluxes on model climate sensitivity

A coupled high and low latitude radiative-dynamical model of the annual mean northern hemisphere has been constructed in order to study the interactions of the vertical and meridional heat fluxes and their feedback effect on model climate sensitivity. The model's climate sensitivity to solar constant changes and CO2 increases is investigated, and the effect of feedback in the dynamical fluxes on model climate sensitivity is examined. Nonlinear interactions between heat fluxes and other feedbacks such as radiation-temperature, ice albedo, and humidity are also discussed.

Wang, W.-C.↗
NASA NTRS1986

HCNH(+) - A new interstellar molecular ion

The first interstellar detection of HCNH(+) is reported. The J = 1-0, 2-1, and 3-2 rotational transitions of this molecule at 74, 148, and 222 GHz have been observed toward Sgr B2. Using a large velocity gradient model calculation, the column density of HCNH(+) is found to be about 4 x 10 to the 14th/sq cm, about one order of magnitude less than that estimated for HCO(+) and HCN in this source. Such a column density implies a fractional abundance of at least one to several orders of magnitude larger than predicted by numerous ion-molecule models. Coupled with a relatively low abundance of HCN and a small HNC/HCN ratio, this suggests that HCNH(+) is not channeled into HCN or HNC as rapidly as thought.

Ziurys, L. M.↗
NASA NTRS1993

Three-dimensional flow analysis inside turbomachinery stages with steady and unsteady Navier-Stokes method

This study presents a numerical method for solving the three-dimensional, Navier-Stokes equations for unsteady, viscous flow through multiple turbomachinery blade rows. The method solves the fully three-dimensional Navier-Stokes equations with an implicit scheme which is based on a control volume approach. A two-equation turbulence model with a low Reynolds number modification is employed in the present study. A third-order accurate upwinding scheme is used to approximate convection terms while a second order accurate central difference scheme is used for the discretization of viscous terms. A second-order accurate scheme is employed for the temporal discretization. The numerical method is applied to study the unsteady flow field of a subsonic turbine stage and the unsteady flow field inside a transonic, high-through-flow, axial compressor stage. The stage calculation is performed by coupling the stator and the rotor flow fields at each time step through an over-laid grid.

Copenhaver, W. W.↗
NASA NTRS1993

A normal stress subgrid-scale eddy viscosity model in large eddy simulation

The Smagorinsky subgrid-scale eddy viscosity model (SGS-EVM) is commonly used in large eddy simulations (LES) to represent the effects of the unresolved scales on the resolved scales. This model is known to be limited because its constant must be optimized in different flows, and it must be modified with a damping function to account for near-wall effects. The recent dynamic model is designed to overcome these limitations but is compositionally intensive as compared to the traditional SGS-EVM. In a recent study using direct numerical simulation data, Horiuti has shown that these drawbacks are due mainly to the use of an improper velocity scale in the SGS-EVM. He also proposed the use of the subgrid-scale normal stress as a new velocity scale that was inspired by a high-order anisotropic representation model. The testing of Horiuti, however, was conducted using DNS data from a low Reynolds number channel flow simulation. It was felt that further testing at higher Reynolds numbers and also using different flows (other than wall-bounded shear flows) were necessary steps needed to establish the validity of the new model. This is the primary motivation of the present study. The objective is to test the new model using DNS databases of high Reynolds number channel and fully developed turbulent mixing layer flows. The use of both channel (wall-bounded) and mixing layer flows is important for the development of accurate LES models because these two flows encompass many characteristic features of complex turbulent flows.

Horiuti, K.↗
NASA NTRS1999

Cryogenic Fuel Tank Draining Analysis Model

One of the technological challenges in designing advanced hypersonic aircraft and the next generation of spacecraft is developing reusable flight-weight cryogenic fuel tanks. As an aid in the design and analysis of these cryogenic tanks, a computational fluid dynamics (CFD) model has been developed specifically for the analysis of flow in a cryogenic fuel tank. This model employs the full set of Navier-Stokes equations, except that viscous dissipation is neglected in the energy equation. An explicit finite difference technique in two-dimensional generalized coordinates, approximated to second-order accuracy in both space and time is used. The stiffness resulting from the low Mach number is resolved by using artificial compressibility. The model simulates the transient, two-dimensional draining of a fuel tank cross section. To calculate the slosh wave dynamics the interface between the ullage gas and liquid fuel is modeled as a free surface. Then, experimental data for free convection inside a horizontal cylinder are compared with model results. Finally, cryogenic tank draining calculations are performed with three different wall heat fluxes to demonstrate the effect of wall heat flux on the internal tank flow field.

Greer, Donald↗
NASA NTRS2019

Serendipitous Geodesy from Bennu's Short-Lived Moonlets

The Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx; or OREx) spacecraft arrived at its target, near-Earth asteroid (101955) Bennu, on December 3, 2018. The OSIRIS-REx spacecraft has since collected a wealth of scientific information in order to select a suitable site for sampling. Shortly after insertion into orbit on December 31, 2018, particles were identified in starfield images taken by the navigation camera (NavCam 1). Several groups within the OSlRlS-REx team analyzed the particle data in an effort to better understand this newfound activity of Bennu and to investigate the potential sensitivity of the particles to Bennu's geophysical parameters. A number of particles were identified through automatic and manual methods in multiple images, which could be turned into short sequences of optical tracking observations. Here, we discuss the precision orbit determination (OD) effort focused on these particles at NASA GSFC, which involved members of the Independent Navigation Team (INT) in particular. The particle data are combined with other OSIRIS-REx tracking data (radiometric from OSN and optical landmark data) using the NASA GSFC GEODYN orbit determination and geodetic parameter estimation software. We present the results of our study, particularly those pertaining to the gravity field of Bennu. We describe the force modeling improvements made to GEODYN specifically for this work, e.g., with a raytracing-based modeling of solar radiation pressure. The short-lived, low-flying moonlets enable us to determine a gravity field model up to a relatively high degree and order: at least degree 6 without constraints, and up to degree 10 when applying Kaula-like regularization. We can backward- and forward-integrate the trajectory of these particles to the ejection and landing sites on Bennu. We assess the recovered field by its impact on the OSIRIS-REx trajectory reconstruction and prediction quality in the various mission phases (e.g., Orbital A, Detailed Survey, and Orbital B).

Mazarico, Erwan↗
NASA NTRS2001

The Origin of Hot Subluminous Horizontal-Branch Stars in Omega Cen and NGC 2808

Ultraviolet observations of the globular clusters omega Cen and NGC 2808 have revealed an unexpected population of hot subluminous stars lying up to 0.7 mag below the extreme horizontal branch (EHB), which axe not explained by canonical stellar models. In order to explore the evolutionary status of these stars, we have evolved a set of low-mass stars from the main sequence through the helium flash to the horizontal branch (HB) for a wide range in the mass loss along the red-giant branch (RGB). Stars with the largest mass loss evolve off the RGB to high effective temperatures before igniting helium in their cores. Our results indicate that the subluminous stars can be explained if these stars undergo a late helium flash while descending the white dwarf cooling curve. Under these conditions the convection zone produced by the helium flash will penetrate into the stellar envelope, thereby mixing the envelope hydrogen into the hot helium-burning interior, where it is rapidly consumed. Such "flashmixed" stars will have helium- and carbon-rich envelopes and will lie at higher effective temperatures than the hottest canonical (i.e., unmixed) EHB stars. Using new stellar atmospheres, we show that these changes in the envelope abundances will suppress the ultraviolet flux in the spectra of the flash-mixed stars by the amount needed to explain the hot subluminous stars in w Cen and NGC 2808. To test this evolutionary scenario, we have obtained medium resolution spectra of a sample of the hottest HB stars in omega Cen. We find that these stars axe indeed helium-rich compared to classical EHB stars and also considerably hotter than the hottest EHB models without flash mixing.

Sweigart, A. V.↗
NASA NTRS2013

Hartman Testing of X-Ray Telescopes

Hartmann testing of x-ray telescopes is a simple test method to retrieve and analyze alignment errors and low-order circumferential errors of x-ray telescopes and their components. A narrow slit is scanned along the circumference of the telescope in front of the mirror and the centroids of the images are calculated. From the centroid data, alignment errors, radius variation errors, and cone-angle variation errors can be calculated. Mean cone angle, mean radial height (average radius), and the focal length of the telescope can also be estimated if the centroid data is measured at multiple focal plane locations. In this paper we present the basic equations that are used in the analysis process. These equations can be applied to full circumference or segmented x-ray telescopes. We use the Optical Surface Analysis Code (OSAC) to model a segmented x-ray telescope and show that the derived equations and accompanying analysis retrieves the alignment errors and low order circumferential errors accurately.

Saha, Timo T.↗
NASA NTRS1993

Empirical wind model for the middle and lower atmosphere. Part 2: Local time variations

The HWM90 thermospheric wind model was revised in the lower thermosphere and extended into the mesosphere and lower atmosphere to provide a single analytic model for calculating zonal and meridional wind profiles representative of the climatological average for various geophysical conditions. Local time variations in the mesosphere are derived from rocket soundings, incoherent scatter radar, MF radar, and meteor radar. Low-order spherical harmonics and Fourier series are used to describe these variations as a function of latitude and day of year with cubic spline interpolation in altitude. The model represents a smoothed compromise between the original data sources. Although agreement between various data sources is generally good, some systematic differences are noted. Overall root mean square differences between measured and model tidal components are on the order of 5 to 10 m/s.

Hedin, A. E.↗
NASA NTRS1988

The scattered solar X-ray background in low earth orbit

In order to interpret X-ray observations of the sun-lit earth obtained with the IPC, a detailed model is developed that treats the radiative transfer of solar X-rays in single scattering approximation and employs the relevant scattering processes (elastic Thomson scattering and inelastic fluorescent scattering). The X-ray-bright earth, one of the strongest soft X-ray sources seen by the IPC, can then be understood in terms of solar X-rays scattered in the upper atmosphere. Using the CIRA 1972 Reference Atmosphere, it is possible to account for the observed 'bright earth' X-ray light curves under a variety of different viewing geometries. It is argued that the observed changes in hardness ratio of the scattered radiation can be interpreted as an indication of a change in the ratio of Thomson and fluorescently scattered photons as a function of zenith angle. The relevance of bright earth X-ray observations is further discussed in the context of operating X-ray telescopes in low-earth orbit, as well as in a broader astrophysical context.

Fink, H. H.↗
NASA NTRS1973

Effect of blockage ratio on drag and pressure distributions for bodies of revolution at transonic speeds

Experimental data were obtained in two wind tunnels for 13 models over a Mach number range from 0.70 to 1.02. Effects of increasing test-section blockage ratio in the transonic region near a Mach number of 1.0 included change in the shape of the drag curves, premature drag creep, delayed drag divergence, and a positive increment of pressures on the model afterbodies. Effects of wall interference were apparent in the data even for a change in blockage ratio from a very low 0.000343 to an even lower 0.000170. Therefore, models having values of blockage ratio of 0.0003 - an order of magnitude below the previously considered safe value of 0.0050 - had significant errors in the drag-coefficient values obtained at speeds near a Mach number of 1.0. Furthermore, the flow relief afforded by slots or perforations in test-section walls - designed according to previously accepted criteria for interference-free subsonic flow - does not appear to be sufficient to avoid significant interference of the walls with the model flow field for Mach numbers very close to 1.0.

Couch, L. M.↗
NASA NTRS1973

Intermediate energy nucleon-deuteron elastic scattering

The adequacy of a multiple scattering description of nucleon-deuteron scattering at intermediate energy is examined. Although the multiple-scattering series is expected to converge slowly, model calculations indicate that the higher-order multiple-scattering terms contribute only to the low-order partial waves. The first two terms, nucleon exchange and single scattering, are assumed to describe the high-order partial waves completely. It is assumed that the deuteron is coupled only to the nucleon channel and that the internal structure is adequately defined by a nonrelativistic wave function.

Wilson, J. W.↗
NASA NTRS1978

Attitude control of a flexible spacecraft

An algorithm is presented for designing optimal low order compensators for high order systems and it is applied to the title problem where many vibration modes are excited by the control torque. These low order compensators are compared with the full order optimal compensator and found to be less sensitive to modeling errors and to provide near optimal attitude regulation.

Martin, G. D.↗
NASA NTRS1989

Transonic viscous flow calculations for a turbine cascade with a two equation turbulence model

A numerical method for the study of steady, transonic, turbulent viscous flow through plane turbine cascades is presented. The governing equations are written in Favre-averaged form and closed with a first order model. The turbulent quantities are expressed according to a two-equation kappa-epsilon model where low Reynolds number and compressibility effects are included. The solution is obtained by using a pseudo-unsteady method with improved perturbation propagation properties. The equations are discretized in space by using a finite volume formulation. An explicit multistage dissipative Runge-Kutta algorithm is then used to advance the flow equations in the pseudo-time. First results of calculations compare fairly well with experimental data.

Boretti, A. A.↗
NASA NTRS1993

Unsteady aerodynamic flow phenomena in a transonic compressor stage

A three-dimensional unsteady, viscous aerodynamic analysis has been developed for the flow inside a transonic, high-through-flow, single stage compressor. The compressor stage is comprised of a low-aspect-ratio rotor and a closely coupled stator. The analysis is based on a numerical method for solving the three-dimensional Navier-Stokes equation for unsteady viscous flow through multiple turbomachinery blade rows. The method solves the fully three-dimensional Navier-Stokes equation with an implicit scheme. A two-equation turbulence model with a low-Reynolds-number modification is applied for the turbulence closure. A third-order accurate upwinding scheme is used to approximate convection terms while a second-order accurate central difference scheme is used for the discretization of the viscous terms. A second-order accurate scheme is employed for the temporal discretization. The numerical method is applied to study the unsteady flow field inside a transonic, high-through-flow, axial compressor stage. The numerical results are compared with available experimental data.

Hah, C.↗
NASA NTRS1990

Direct Numerical Simulations of Turbulent Convection: Variable Gravity and Uniform Rotation - Part 1

Turbulent convection may have played a major role in determining the structure and evolution of the primordial solar nebula, but current, incomplete models of convection and turbulence give very different results and remain largely untested in the absence of detailed astronomical observations. Numerical simulations provide an 'experimental' database for comparison with these models, and, to this end, direct numerical simulations of turbulent convection were performed with modifications intended to mimic some of the unique physical features of thin accretion disks, such as the primordial solar nebula: internal heating, a gravitational acceleration that is linearly proportional to the distance from midplane of the nebula, and rapid rotation. Peclet numbers in the simulations are comparable to those in solar nebula models; Rossby numbers in the simulations are an order of magnitude larger than those in solar nebula models because of the unrealistically high Prandtl and low, Reynolds numbers required to resolve all scales of the convective flow. We find that, despite the loss of buoyancy at midplane, turbulent motions easily penetrate the midplane region with little loss of intensity, providing efficient transport of heat and turbulent kinetic energy throughout the interior. A simple mixing length model modified to include rotation is found to give convective heat fluxes for the interior flow in rough agreement with the numerical simulations. We discuss these preliminary results with regard to assumptions about heating distributions and convective heat fluxes made in standard solar nebula models. More definitive comparisons with solar nebula modelling will become possible when more realistic effects of shear, density, stratification, and compression are included.

Cabot, W.↗