Search NASA⌕ Search

SEARCH · Search NASA

Results for “low temperature drying”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Substantial influence of vapour buoyancy on tropospheric air temperature and subtropical cloud

The molar mass of water vapor is less than that of dry air, making humid air lighter than dry air at the same temperature and pressure. This effect is known as vapor buoyancy and has been considered negligibly small in large-scale climate dynamics. Here we use theory, reanalysis data, and a hierarchy of climate models to show that vapor buoyancy has a similar magnitude to thermal buoyancy in the tropical free troposphere. We further show that vapor buoyancy makes cold air rise and increases subtropical stratiform low clouds by up to 70% of its climatological value. However, some widely used climate models fail to represent vapor buoyancy in the governing equations. Further, this flaw leads to inaccurate simulations of cloud distributions—the largest uncertainty in predicting climate change.

54 ENVIRONMENTAL SCIENCES↗

Effects on optical systems from interactions with oxygen atoms in low earth orbits

Modifications of material surface properties due to interactions with ambient atomic oxygen have been observed on surfaces facing the orbital direction in low earth orbits. Some effects are very damaging to surface optical properties while some are more subtle and even beneficial. Most combustible materials are heavily etched, and some coatings, such as silver and osmium, are seriously degraded or removed as volatile oxides. The growth of oxide films on metals and semiconductors considered stable in dry air was measured. Material removal, surface roughness, reflectance, and optical densities are reported. Effects of temperature, contamination, and overcoatings are noted.

Peters, P. N.↗

Addressing Data Center Cooling Needs through the Use of Subsurface Thermal Energy Storage Systems

This study aims to evaluate the feasibility of addressing the cooling needs for information technology (IT) equipment in data centers by using reservoir thermal energy storage (RTES) to provide reliable and sustainable low-temperature fluid. This project focuses on the technical viability of operating such a system in Houston, Texas, which is a representative location for crypto mining data centers. An analysis has been performed to investigate the technical feasibility with climate data for Houston. Results show that data centers on the scale of 30 MW, and operating at a temperature of 27 degrees C, can be reliably cooled by a combined RTES and dry coolers setup. A techno-economic analysis will be performed and energy/water saving benefits will be quantified in the future. In addition, the study will be extended to other representative data center locations with different climates and geographical locations.

cooling↗

Thermally Insulating Transparent Barrier (THINNER) coatings on single pane windows

Conventional silica aerogel monoliths can provide remarkable thermal insulation but the presence of large pores (> 30 nm) tends to scatter visible light and render the material opaque or translucent instead of transparent. In addition, they are prone to cracking during synthesis and handling which makes them difficult to integrate in products and in particular in window solutions. This project developed two new solgel synthesis methods using silica precursors or preformed silica nanoparticles and ambient drying to produce mesoporous organo-silica monoliths. The monoliths were (i) thermally insulating, (ii) optically transparent, (iii) flexible, and (iv) hydrophobic. They feature porosity ranging from 50% to 90% with narrow pore size distribution with pore less than 20 nm resulting in excellent optical clarity (haze < 2%) and very low thermal conductivity (< 30 mW/mK). Interestingly, not only porosity but also pore size and mass fractal dimension were found to affect the thermal conductivity of the mesoporous silica. The superior transparency of the monoliths was shown to be attributed to dependent scattering among silica nanoparticles. Flexibility was achieved through trimethylchlorosilane surface modification. Furthermore, process scale-up and integration of the ambigel monoliths into window solutions using optically clear adhesives were also demonstrated in 6”x6” double-pane windows. The aerogel and the window solution were shown to be durable to accelerated aging under UV, moisture, and/or temperature gradient and thermal cycling. Overall, the window solution achieved the technical performance and the cost target of $10/sqft set for the SHIELD program. However, scaling to industry relevant scale (> 10’x10’) remains a challenge due to requirements on the drying process and fume hood size and to the propensity of large aerogel slab to crack during drying.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Accuracy of sea ice temperature derived from the advanced very high resolution radiometer

The accuracy of Arctic sea ice surface temperatures T(sub s) dericed from advanced very high resolution radiometer (AVHRR) thermal channels is evaluated in the cold seasons by comparing them with surface air temperatures T(sub air) from drifting buoys and ice stations. We use three different estimates of satellite surface temperatures, a direct estimate from AVHRR channel 4 with only correction for the snow surface emissivity but not for the atmosphere, a single-channel regression of T(sub s) with T(sub air), and Key and Haefliger's (1992) polar multichannel algorithm. We find no measurable bias in any of these estimates and few differences in their statistics. The similar performance of all three methods indicates that an atmospheric water vapor correction is not important for the dry winter atmosphere in the central Arctic, given the other sources of error that remain in both the satellite and the comparison data. A record of drifting station data shows winter air temperature to be 1.4 C warmer than the snow surface temperature. `Correcting' air temperatures to skin temperature by subtracting this amount implies that satellite T(sub s) estimates are biased warm with respect to skin temperature by about this amount. A case study with low-flying aircraft data suggests that ice crystal precipitation can cause satellite estimates of T(sub s) to be several degrees warmer than radiometric measurements taken close to the surface, presumably below the ice crystal precipitation layer. An analysis in which errors are assumed to exist in all measurements, not just the satellite measurements, gives a standard deviation in the satellite estimates of 0.9 C, about half the standard deviation of 1.7 C estimated by assigning all the variation between T(sub s) and T(sub air) to errors in T(sub s).

Yu, Y.↗

Effect Of Molecular Weight On Adhesive Properties Of The Phenylethynyl-Terminated Polyimide LARC(sup TM)-PETI-5

Future civilian aircraft will require the use of advanced adhesive systems with high temperature capabilities. One such material has been developed at the NASA Langley Research Center, a phenylethynyl-terminated polyimide given the designation LARC(sup TM)-PETI-5. Recent work has shown the advantages of similar phenylethynyl-terminated polyimides as films, moldings, adhesives, and composite matrix resins. Phenylethynyl-terminated oligomers provide greater processing windows than materials which incorporate simple ethynyl endcaps. Since these low molecular weight, low melt viscosity oligomers thermally cure without the evolution of volatile by-products, they provide an excellent means of producing polymers with high glass transition temperatures, excellent solvent resistance, and high mechanical properties. Three different versions of LARC(sup TM)-PETI-5 with theoretical number average molecular weights (M(sub n)s) of 250, 5000, and 10000 g/mol were synthesized in this work. Differential Scanning Calorimetry (DSC) measurements were performed on the dry powder form of these materials to establish cure conditions which result in high glass transition temperatures (T(sub g)s). Lap shear specimens were prepared from adhesive tape made from each material and with the thermal cure conditions determined from the DSC data. The tensile shear data established processing conditions which provided the best adhesive strengths. Further testing was performed to establish the properties of LARC(sup TM)-PETI-5 as an adhesive material and to determine its solvent resistance.

Cano, Roberto J.↗

Investigation of Capillary Limit in a Loop Heat Pipe

This paper presets an experimental study on the capillary limit of a loop heat pipe (LHP) at low powers. The slow thermal response of the loop at low powers made it possible to observe interactions among various components after the capillary limit was exceeded. The capillary limit at low powers was achieved by imposing additional pressure drops on the vapor line through the use of a metering valve. A differential pressure transducer was also used to measure the pressure drop across the evaporator and the compensation chamber (CC). Test results show that when the capillary limit is exceeded, vapor will penetrate the primary wick, resulting in a partial dry-out of the evaporator and a rapid increase of the CC temperature. Because the evaporator can tolerate vapor bubbles, the LHP will continue to function and may reach a new steady state at the higher temperature. Thus, the LHP will exhibit a graceful degradation in performance rather than a complete failure. Moreover, the loop can recover from a partial dry-out by reducing the heat load without a re-start.

Ku, Jentung↗

Climate-Induced Northerly Expansion of Siberian Silkmoth Range

Siberian silkmoth (Dendrolimus sibiricus Tschetv.) is a dangerous pest that has affected nearly 2.5 x 10(exp 6) ha of “dark taiga” stands (composed of Abies sibirica, Pinus sibirica and Picea obovata) within the latitude range of 52°–59° N. Here we describe a current silkmoth outbreak that is occurring about half degree northward of its formerly documented outbreak range. This outbreak has covered an area of about 800 thousand ha with mortality of conifer stands within an area of about 300 thousand ha. The primary outbreak originated in the year 2014 within stands located on gentle relatively dry southwest slopes at elevations up to 200 m above sea level (a.s.l.) Then the outbreak spread to the mesic areas including northern slopes and the low-elevation forest belts along the Yenisei ridge. Within the outbreak area, the northern Siberian silkmoth population has reduced generation length from two to one year. Our study showed that the outbreak was promoted by droughts in prior years, an increase of the sum of daily temperatures (t > +10 °C), and a decrease in ground cover moisture. Within the outbreak area, secondary pests were also active, including the aggressive Polygraphus proximus bark borer beetle. The outbreak considered here is part of the wide-spread (panzonal) Siberian silkmoth outbreak that originated during 2014–2015 with a range of up to 1000 km in southern Siberia. Our work concludes that observed climate warming opens opportunities for Siberian silkmoth migration into historically outbreak free northern “dark taiga” stands.

Siberian taiga↗

Balancing moisture and oxygen can match the crystallization dynamics of inert halide perovskite processing

Understanding crystallization in ambient environments is essential for scaling the fabrication of halide perovskite solar cells. Antisolvent-free perovskite deposition offers improved compatibility with high-throughput processing but introduces distinct crystallization dynamics relative to the more ubiquitous use of antisolvents in lab-scale perovskite fabrication. These dynamics are driven by interactions between solutes, solvent and the deposition environment. Using in situ wide-angle X-ray scattering during spin-coating and annealing, we demonstrate how relative humidity (RH) and oxygen, can be tuned to drive polytype evolution during ambient crystallization of formamidinium lead iodide to match that of inert synthesis and achieve comparable film and device quality. In an inert (N 2 ) environment, we find that perovskite films follow a well-established 2H → 3C phase transformation with a short period of coexistence of the 4H and 6H phase during heating. During crystallization in dry air (RH 0%), the added presence of oxygen leads to the dominance of 4H intermediate for an extended duration, establishing a 2H → 4H → 3C pathway. Introducing low humidity (RH 10%) suppresses the 4H phase to a short-lived intermediate above 100 °C, facilitating a more direct transition to the desired 3C phase and almost replicating the crystallization behavior observed under inert conditions. Interestingly, films crystallized under RH 10% show a lower onset temperature for the perovskite 3C phase than under N 2 . At higher humidity (RH 40%), the strong interaction of oxygen and moisture with iodoplumbates appears to stabilize higher order polytypes (4H and 6H). Devices fabricated under RH 10% achieve higher efficiency and enhanced stability compared to those produced under inert atmosphere. These findings provide mechanistic insight into crystallization pathways in different environments and provide a framework to transfer processes from inert to ambient conditions. The results highlight the critical role of controlled humidity in tuning antisolvent-free perovskite crystallization for scalable processing.

Hossain, Maimur [Univ. of California, San Diego, C↗

Low predictability of energy balance traits and leaf temperature metrics in desert, montane and alpine plant communities

Abstract Leaf energy balance may influence plant performance and community composition. While biophysical theory can link leaf energy balance to many traits and environment variables, predicting leaf temperature and key driver traits with incomplete parameterizations remains challenging. Predicting thermal offsets ( δ , T leaf − T air difference) or thermal coupling strengths ( β , T leaf vs. T air slope) is challenging. We ask: (a) whether environmental gradients predict variation in energy balance traits (absorptance, leaf angle, stomatal distribution, maximum stomatal conductance, leaf area, leaf height); (b) whether commonly measured leaf functional traits (dry matter content, mass per area, nitrogen fraction, δ 13 C, height above ground) predict energy balance traits; and (c) how traits and environmental variables predict δ and β among species. We address these questions with diurnal measurements of 41 species co‐occurring along a 1,100 m elevation gradient spanning desert to alpine biomes. We show that (a) energy balance traits are only weakly associated with environmental gradients and (b) are not well predicted by common functional traits. We also show that (c) δ and β can be partially approximated using interactions among site environment and traits, with a much larger role for environment than traits. The heterogeneity in leaf temperature metrics and energy balance traits challenges larger‐scale predictive models of plant performance under environmental change. A free Plain Language Summary can be found within the Supporting Information of this article.

Blonder, Benjamin↗

Dry and Wet CO 2 Capture from Milk‐Derived Microporous Carbons with Tuned Hydrophobicity

Abstract Pore size distribution and surface chemistry of bio‐derived (milk) microporous dominated carbon “MDC” is synergistically tuned, allowing for promising carbon capture in a dry CO 2 atmosphere and in mixed H 2 O–CO 2 . The capture capacity is attributed to the synergy of a large total surface area with an ultramicroporous and microporous texture (e.g., S tot 1889 m 2 g −1 , S mic 1755 m 2 g −1 , S ultra 1393 m 2 g −1 ), and a high content of nitrogen and oxygen heteroatom moieties (e.g., 5 at% N, 10.5 at% O). Tailored two‐step low‐temperature pyrolysis‐chemical activation is employed to take advantage of the intrinsic properties of the precursor, allowing for this unusual textural properties‐heteroatoms combination. For example, tested at 1 bar and 295 or 273 K, MDCs adsorb up to 22.0 and 29.4 wt% CO 2 , respectively. MDCs are also tailored to be hydrophobic, with CO 2 /H 2 O adsorption selectivity even after prolonged cycling. Maximum working capacities of 10.8 wt% for pure CO 2 and 3.5 wt% for a flue gas simulant (15% CO 2 , 85% N 2 ) are measured using temperature swing adsorption with dynamic purge gases, while being minimally affected by humid conditions. This work is directly aligned with the United Nation’s Sustainable Development Goal 13, take urgent action to combat climate change and its impacts.

Pokrzywinski, Jesse↗

Numerical investigations to identify environmental factors for field-scale reactive transport of pathogens at riverbank filtration sites

While induced bank filtration is a proven method for facilitating sustainable drinking water production, it is at risk from surface water contaminations (e.g., pathogens). Induced bank filtration and pathogen transport in groundwater have been studied extensively. However, long-term studies that consider real-world conditions are missing. These conditions include seasonal changes to environmental conditions and waterworks operations. Therefore, to analyze the effect of seasonal changes on the transport of human pathogenic viruses and their indicators in induced bank filtration, concentrations of adenoviruses and pathogen indicators were monitored over 16 months at an active bank filtration plant at the Rhine River, in Düsseldorf (Germany). Based on this data, a 2D groundwater model was created in PFLOTRAN that simulated flow, heat transport, conservative transport of chloride and the resulting electrical conductivity, reactive transport of oxygen and nitrate, and colloid-based transport of coliforms, somatic coliphages, and adenoviruses. The results show that reduced travel time was the key factor determining periods with a low removal of coliforms and somatic coliphages in the aquifer. Travel time was controlled by river level variations during rainy seasons, and the waterworks extraction rates during dry seasons. Further, for adenovirus transport, travel distance in the subsurface appeared to be the key factor, while travel time had no significant impact. Coliform removal increased when the colmation layer permeability decreased, while coliphage and adenovirus removal was unaffected by the colmation layer permeability. Seasonal changes in temperature and oxygen content did not significantly impact the removal of coliphages and adenoviruses in groundwater. Denitrifying conditions correlated with a lowered coliform removal, but the modelling could not establish a connection between denitrifying conditions and coliform removal. Our study showed that removal of pathogens and pathogen indicators at induced bank filtration plants varies greatly in time and space (e.g., for coliforms from 1 to 4 log-levels at 20m travel distance), and that adenovirus transport differs considerably from transport of coliforms and somatic coliphages.

59 BASIC BIOLOGICAL SCIENCES↗

In-flight estimation of gyro noise on the Upper Atmosphere Research Satellite (UARS) and Extreme Ultraviolet Explorer (EUVE) missions

This paper characterizes the low-frequency noise response of the Teledyne dry rotor inertial reference unit (DRIRU) gyroscopes on the Upper Atmosphere Research Satellite (UARS) and the Extreme Ultraviolet Explorer (EUVE). The accuracy of spacecraft attitude estimation algorithms that use gyro data for propagating the spacecraft attitude is sensitive to gyro noise. EUVE gyro data were processed to validate a single-axis gyro noise model, which is used onboard various spacecraft. The paper addresses the potential impact of temperature effects on the gyro noise model and the overall impact on attitude determination accuracy. The power spectral density (PSD) of the gyro noise is estimated from UARS in-flight data by Fast Fourier Transform (FFT). The role of actuator dynamics on the PSD function is also discussed.

Lee, M.↗

Extraction technique for the determination of oxygen-18 in water using preevacuated glass vials

The need for a rapid, inexpensive technique for routine 18O/16O extraction from water has arisen recently through applications in the medical sciences and in hydrology. The traditional experimental technique for determining the oxygen isotope composition of water, the CO2-H2O equilibration method, is tedious, time consuming, and involves the use of custom-made glass apparatus. Furthermore, because of potential memory effects from one sample to the next, the glassware needs to be thoroughly cleaned between runs. A few attempts have been made to improve upon the method. Attempts to analyze water directly in the source of the mass spectrometer produced large memory effects and questionable results. Commercially available apparatus for automated extraction of 18O/16O from water is generally prohibitively expensive and often is designed to interface only with the manufacturer's own mass spectrometer. The method described in this paper utilizes inexpensive, off-the-shelf, preevacuated, glass vials. Preevacuated vials have been used by others for the isotopic analysis of breath CO2 and are well tested. The vials can be purchased in bulk from scientific apparatus suppliers at a relatively low cost. These are coupled with a simplified extraction line consisting of a stainless steel syringe needle and a glass cold trap. Vials are filled with CO2 and H2O and shaken in a constant-temperature water bath for at least 90 min. Since the vials are discarded after use, no cleaning is necessary, essentially eliminating any memory effect. Reproducibility is generally better than +/- 0.05%. The only reagents required are gaseous CO2 for equilibration, a dry ice/alcohol mixture for trapping water, and liquid nitrogen for transferring the CO2.

NASA Discipline Number 52-10↗

Thermal Insulation Strips Conserve Energy

Launching the space shuttle involves an interesting paradox: While the temperatures inside the shuttle s main engines climb higher than 6,000 F hot enough to boil iron for fuel, the engines use liquid hydrogen, the second coldest liquid on Earth after liquid helium. Maintained below 20 K (-423 F), the liquid hydrogen is contained in the shuttle s rust-colored external tank. The external tank also contains liquid oxygen (kept below a somewhat less chilly 90 K or -297 F) that combines with the hydrogen to create an explosive mixture that along with the shuttle s two, powdered aluminum-fueled solid rocket boosters allows the shuttle to escape Earth s gravity. The cryogenic temperatures of the main engines liquid fuel can cause ice, frost, or liquefied air to build up on the external tank and other parts of the numerous launch fueling systems, posing a possible debris risk when the ice breaks off during launch and causing difficulties in the transfer and control of these cryogenic liquid propellants. Keeping the fuel at the necessary ultra-cold temperatures while minimizing ice buildup and other safety hazards, as well as reducing the operational maintenance costs, has required NASA to explore innovative ways for providing superior thermal insulation systems. To address the challenge, the Agency turned to an insulating technology so effective that, even though it is mostly air, a thin sheet can prevent a blowtorch from igniting a match. Aerogels were invented in 1931 and demonstrate properties that make them the most extraordinary insulating materials known; a 1-inch-thick piece of aerogel provides the same insulation as layering 15 panes of glass with air pockets in between. Derived from silica, aluminum oxide, or carbon gels using a supercritical drying process - resulting in a composition of almost 99-percent air - aerogels are the world s lightest solid (among 15 other titles they hold in the Guinness World Records), can float indefinitely on water if treated to be hydrophobic, and can withstand extremely hot temperatures (from 1,100 F to 3,000 F depending on the type of aerogel) down to cryogenic levels, making this "frozen smoke" ideal for use in space. Because of its low weight and ability to withstand temperature extremes, an aerogel was even used as the space-based catcher s mitt to trap comet particles and space dust for NASA s Stardust mission, launched in 1999. All of this remarkable technology s characteristics were ideal for NASA s purposes except one: The aerogels were extremely brittle. Through a long-term partnership between Kennedy Space Center and Aspen Aerogels Inc., of Northborough, Massachusetts, researchers developed a flexible, durable form of aerogel that NASA has since used as cryogenic insulation for space shuttle launch systems. Through Aspen Aerogels, the technology has made oil pipeline insulation, extreme weather clothing, and infrared shielding for combat helicopters.

Source record↗

Inter-annual variation of tropical cyclones simulated by GEOS-5 AGCM with modified convection scheme

The Goddard Earth Observing System version 5 (GEOS-5) global climate model with a 50-km horizontal resolution is forced by observed sea surface temperature (SST) to examine the fidelity of the seasonal-mean and inter-annual variation of tropical cyclones (TCs) in the western North Pacific (WNP) and the North Atlantic (NATL). The standard Relaxed Arakawa Schubert (RAS) deep convection scheme is modified to improve the representation of TCs, where the scheme implements a stochastic limit of the cumulus entrainment rate. The modification drives mid- and upper-tropospheric cooling and low- to mid-tropospheric drying in the background state, which tends to increase atmospheric instability. This enables the model to increase convective variability on an intra-seasonal timescale and improve the simulation of intense storms. Five-member ensemble runs with the modified RAS scheme for 12 years (1998–2009) exhibit realistic spatial distributions in the climatological-mean TC development area and their pathways over WNP and NATL. The GCM is able to reproduce the inter-annual variation of accumulated cyclone energy (ACE) by prescribing yearly varying observed SST even though the individual TC intensity is still underpredicted. A sensitivity of TC activity to El Niño–Southern Oscillation (ENSO) phase is also reproduced realistically over WNP in terms of the spatial pattern changes in the main development region and TC pathways. However, the model exhibits a notable deficiency in NATL in reproducing the observed inter-annual variation of TC activity and the sensitivity to the ENSO.

accumulated cyclone energy↗

Optimization of Aerogels for High Temperature Applications

Aerogels can be used in spaceflight applications as thermal insulators due to their low density, low thermal conductivity, and tortuous path for solid conduction. However, the aerogel formulation must be optimized to increase the thermal stability of the aerogels as drastic densification and decrease in surface area is often exhibited after high-temperature exposure. Current research investigates yttria-stabilized zirconia (YSZ) aerogels, which have low thermal conductivity and are expected to be used between 600°C and 1000°C. We anticipate that new sol-gel chemistries and processing will yield YSZ aerogels that display retained mesoporous structure, increased surface area, and minimized shrinkage upon exposure to higher temperatures in the projected use range. This work investigates the cationic surfactant, cetrimonium bromide (CTAB), as a templating agent to prevent the collapse of the aerogel pore structure upon gelation and drying. It was determined that adding one-half times the critical micelle concentration (CMC) of CTAB increased the surface area and pore volume of the aerogels, as compared to aerogels without CTAB or with twice the CMC of CTAB, following high-temperature exposure. By optimizing CTAB, the thermal stability of YSZ aerogels can be enhanced to make these materials more efficient when used as thermal management systems.

Rebecca C Walker↗

Phase Transitions and Melting in the Venusian Basaltic Crust: Implications for Crustal Recycling

Understanding phase transitions and melting in the Venusian crust and the associated changes in density are critical to constrain crustal thickness, recycling, and remelting processes. For example, average surface conditions on Venus of 92 bars and 460 °C correspond to low-grade metamorphic conditions on Earth equivalent to hornfels- and greenschist-facies. Further, the primary igneous mineralogy in the Venusian crust should be replaced by metamorphic minerals over time and potentially melt, as temperatures and pressures increase with depth along geothermal gradients. Here, we use Perple_X (Connolly, 2005), a Gibbs free energy minimization program to calculates table phase equilibria over a range of pressure and temperature conditions for whole-rock compositions of a dry basalt, alkali basalt, and peridotite. Further, we extract mineral abundancies along five geotherms of 5, 10, 15, 20 and 25 °C/km and calculate the rock density after the extraction of melt. On the coldest geotherm of 5 °C/km, melting would start at ~ 197 km and ~121 km in the basalt and alkali basalt, respectively, and therefore at depths that significantly exceed the estimated thickness of the Venusian crust (8-25 km). A density cross-over, where the crustal density would exceed that of the mantle could potentially induce delamination and is estimated to occur at ~ 40 km for both compositions. On the 10 °C/km geotherm, melting of the basalt starts at 65 km and melt extraction only causes a gradual densification due the formation of initially lower melt proportions. In contrast, the alkali basalt starts to melt at a depth of ~ 57 km and the subsequent densification of the residual composition could trigger delamination at ~ 60km depth. For hotter geotherms (i.e., 25 °C/km gradient), melting would occur at shallower depths of 21 – 23 km. However, the basalt will not get significantly denser than the mantle while the residuum of the alkali basalt would reach a density cross-over at 30 km. Hence, differences in Venusian crustal compositions can significantly influence the thickness of the crust on individual geotherms. Our results demonstrate that phase transitions and melting are strongly dependent on the assumed geotherm and could, combined with geodynamic models, further constrain crustal parameters.

Julia Semprich↗