Search NASA⌕ Search

SEARCH · Search NASA

Results for “marine boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Stratocumulus simulation with a general circulation model

Stratus and stratocumulus cloud sheets which are among the most common cloud types over the world are discussed. They are characteristic of the undisturbed subtropical marine boundary layer over the eastern oceans, where cool water and large scale sinking motion suppress penetrative cumulus convection. They also occur over the Arctic Ocean, particularly in summer, and behind cold outbreaks over the western oceans in winter. Observational studies were conducted and further observations are planned.

Randall, D. A.↗
NASA NTRS1985

Aircraft measurements of ammonia and nitric acid in the lower troposphere

The first simultaneous measurements of ammonia and nitric acid in the troposphere have been made from an aircraft using a tungsten oxide denuder system. Vertical profiles of NH3 and HNO3 taken over coastal Virginia and Maryland in March and September, 1983, at altitudes from 150 m to 3000 m, show mixing ratios that decrease with altitude. Ammonia profiles show substantial seasonal variation, while nitric acid profiles do not. Using the measured profiles and a one-dimensional photochemical model, lifetimes due to heterogeneous loss of one day for HNO3 and ten days for NH3 are calculated. In contrast, NH3 profiles up to 5300 m over the North Atlantic Ocean during August 1982 show mixing ratios that increase slightly with altitude. These data represent the first ammonia profiles measured over the ocean. It is suggested that the increase in NH3 with altitude is a result of an ammonia-rich continental air mass advected over the ocean, followed by the dissolution of NH3 in the marine boundary layer on water-covered sea salt particles.

Lebel, P. J.↗
NASA NTRS1985

Development of the variational SEASAT data analysis technique

Surface winds are closely associated with the surface pressure gradient. The variational SEASAT data analysis technique was designed to improve the sea level pressure analysis in the data sparse areas. The SEASAT-derived surface wind data were compared with observations from the Joint Air Sea Interaction Experiment (JASIN) and it was found that the satellite-derived sea surface wind has an accuracy of up to + or - 2 m/s in speed and + or - 20 deg in direction. These numbers are considered characteristic of the retrieved SEASAT wind field. By combining the densely spaced SEASAT-derived wind data with the sparsely distributed sea-level pressure observation via a variational adjustment technique subject to some appropriate physical constraint(s), an improvement in the sea-level pressure analysis is expected. It is demonstrated that a simple marine boundary layer scheme in conjunction with a variational adjustment technique can be developed to help improve the sea-level pressure analysis by the SEASAT-derived wind of a limited-area domain in the ocean.

Sasaki, Y. K.↗
NASA NTRS1986

Development of a variational SEASAT data analysis technique

Oceans are data-sparse areas in terms of conventional weather observations. The surface pressure field obtained solely by analyzing the conventional weather data is not expected to possess high accuracy. On the other hand, in entering asynoptic data such as satellite-derived temperature soundings into an atmospheric prediction system, an improved surface analysis is crucial for obtaining more accurate weather predictions because the mass distribution of the entire atmosphere will be better represented in the system as a result of the more accurate surface pressure field. In order to obtain improved surface pressure analyses over the oceans, a variational adjustment technique was developed to help blend the densely distributed surface wind data derived from the SEASAT-A radar observations into the sparsely distributed conventional pressure data. A simple marine boundary layer scheme employed in the adjustment technique was discussed. In addition, a few aspects of the current technique were determined by numerical experiments.

Sasaki, Y. K.↗
NASA NTRS1986

Using a laser aureole to invert lidar return

An aureole generated by a laser beam was studied. The strength of the signal redirected towards a sensor high above the surface by a combination of one scattering event in the marine boundary layer (mbl) and one single reflection event from the ocean surface was estimated. A model of mbl aerosol size distributions was used to estimate Mie scattering for a wide range of meteorolocial conditions. The sea surface reflection was determined from a Gaussian model of the wave slopes. These laser aureoles which were estimated over the wide range of conditions and were normalized by the reflected laser light were found to be highly correlated with the optical depth of the boundary layer. By estimating optical depth from the aureole, the Bernoulli-Riccati inversion of lidar return could be constrained and the inversion accuracy improved. A Monte Carlo program was developed to study the laser aureole generated by up to 8 orders of reflection and scattering. The aureole was generated by a narrow, 10 nsec laser pulse at 1.06 microns and measured by a receiver 10 km above the ocean surface. The original theoretical computation compared well with the Monte Carlo method. When multiple scattereffects were included, the normalized aureole was still highly correlated with the mbl optical depth over the range of conditions.

Hooper, W. P.↗
NASA NTRS1986

Lidar observations and modeling of cold air outbreaks during MASEX and GALE

As part of MASEX and GALE a number of research flights were carried out over the Marine Boundary Layer (MBL) during periods when extremely cold and dry continental air was flowing out over the warm coastal waters at the east coast of the U.S. Such periods, which are named cold air outbreaks are characterized by massive warming and moistening of the MBL resulting in rapid entrainment conditions. As the MBL deepens as a function of fetch over the ocean, clouds develop. The line of cloud formation typically follows the coast line closely as has been observed many times from satellite imagery. The backscatter data from the NASA Goddard airborne lidar, which was used to measure the depth of the MBL in great detail, is ideally suited to verify parametrized models of boundary layer growth rate. The data indicates that the deepening MBL gradually develops clouds at its top. Those clouds form an integral part of the MBL and exercise an important influence on the energy cycle within the MBL. It is suggested that the rapid entrainment observed during overcast conditions represent an increase in efficiency of conversion of available turbulence kinetic energy into entrainment energy.

Boers, R.↗
NASA NTRS1988

Genesis of Atlantic Lows Experiment (GALE) - An overview

The field phase of the Genesis of Atlantic Lows Experiment (GALE) was conducted from 15 January to 15 March 1986. The objectives of GALE were to study mesoscale and air-sea interaction processes in East Coast winter storms, with particular emphasis on their contributions to cyclogenesis. This project area, specail observing systems, and field operations are described. There were thirteen special observing periods during the field phase including eight cases of cyclogenesis. Meterological and oceanographic phenomena on which special observations were collected include: cyclogenesis, rainbands, cold fronts, coastal fronts, cold-air damming, jets streaks, tropopause folding, low-level jets, cold-air outbreaks, lightning and marine boundary layer interactions with Gulf Stream and mid-shelf oceanic fronts. Preliminary research findings and operational implications are presented. GALE data documents are listed. The GALE data set is open to all interested scientists.

Dirks, R. A.↗
NASA NTRS1989

Probabilities and statistics for backscatter estimates obtained by a scatterometer

Methods for the recovery of winds near the surface of the ocean from measurements of the normalized radar backscattering cross section must recognize and make use of the statistics (i.e., the sampling variability) of the backscatter measurements. Radar backscatter values from a scatterometer are random variables with expected values given by a model. A model relates backscatter to properties of the waves on the ocean, which are in turn generated by the winds in the atmospheric marine boundary layer. The effective wind speed and direction at a known height for a neutrally stratified atmosphere are the values to be recovered from the model. The probability density function for the backscatter values is a normal probability distribution with the notable feature that the variance is a known function of the expected value. The sources of signal variability, the effects of this variability on the wind speed estimation, and criteria for the acceptance or rejection of models are discussed. A modified maximum likelihood method for estimating wind vectors is described. Ways to make corrections for the kinds of errors found for the Seasat SASS model function are described, and applications to a new scatterometer are given.

Pierson, Willard J., Jr.↗
NASA NTRS1990

An eight-month climatology of marine stratocumulus cloud fraction, albedo, and integrated liquid water

As part of the FIRE/Extended Time Observations (ETO) program, extended time observations were made at San Nicolas Island (SNI) from March to October, 1987. Hourly averages of air temperature, relative humidity, wind speed and direction, solar irradiance, and downward longwave irradiance were recorded. The radiation sensors were standard Eppley pyranometers (shortwave) and pyrgeometers (longwave). The SNI data were processed in several ways to deduce properties of the stratocumulus covered marine boundary layer (MBL). For example, from the temperature and humidity the lifting condensation level, which is an estimate of the height of the cloud bottom, can be computed. A combination of longwave irradiance statistics can be used to estimate fractional cloud cover. An analysis technique used to estimate the integrated cloud liquid water content (W) and the cloud albedo from the measured solar irradiance is also described. In this approach, the cloud transmittance is computed by dividing the irradiance measured at some time by a clear sky value obtained at the same hour on a cloudless day. From the transmittance and the zenith angle, values of cloud albedo and W are computed using the radiative transfer parameterizations of Stephens (1978). These analysis algorithms were evaluated with 17 days of simultaneous and colocated mm-wave (20.6 and 31.65 GHz) radiometer measurements of W and lidar ceilometer measurements of cloud fraction and cloudbase height made during the FIRE IFO. The algorithms are then applied to the entire data set to produce a climatology of these cloud properties for the eight month period.

Fairall, C. W.↗
NASA NTRS1990

Peroxyacetyl nitrate measurements during CITE 2 - Atmospheric distribution and precursor relationships

Results are reported from airborne PAN measurements obtained at altitudes 0-6 km over the continental U.S. and the eastern Pacific during the NASA Global Tropospheric Experiment Chemical Instrumentation Test and Evaluation 2 (CITE 2) in summer 1986. The CITE 2 flights and instrumentation are described, and the results are presented in extensive graphs and characterized in detail. It is shown that PAN is an important reactive N-containing species in the troposphere. Although the PAN mixing ratios were highly variable, in general high mixing ratios of 100-300 parts per trillion by volume (pptv) were found at 4-6 km, and very low ratios (5-20 pptv) were detected in the marine boundary layer. Good correlation was seen between the CITE 2 PAN values and those for O3, NO(y), NO(x), HNO3, C2H6, CO, and CFCl3.

Singh, H. B.↗
NASA NTRS1990

Plume mechanics and stratocumulus convection

The First ISCCP Regional Experiment (FIRE) marine stratocumulus Intensive Field Observation (IFO) held in July, 1987 produced a data set that is far more comprehensive than data sets from previous stratocumulus experiments. One exciting new development was the use of the 10.6 micron lidar system for cloud-top mapping that was available on the National Center for Atmospheric Research (NCAR) Electra. This system provided a unique look at the small scales of the turbulence in the clouds, images of the turbulent structures that are quantitatively revealed by conditional sampling (e.g., Khalsa and Greenhut, 1987). The behavior of these updrafts and downdrafts is central to the dynamics of the stratocumulus-topped marine boundary layer. FIRE's objectives of understanding cloud dynamics and how they affect the cloud optical depth - which, in turn, is the crucial factor in determining the clouds' albedo - therefore require the investigation of these drafts. Given here are initial results from a simple model capable of simulating moist, entraining plumes that are subject to water phase changes and radiative heating and cooling. These results correspond, therefore, to the 'dry cloud' case discussed by Lilly and Schubert (1980). The model's simplicity limits the realism of the results - the plumes are assumed not to interact, for example - but the role of radiative processes in influencing the plume dynamics is clear. Also revealed is the role the plumes play is maintaining the cloud-top inversion. The model equations and methodology used, and qualitative results are given.

Hanson, Howard P.↗
NASA NTRS1990

A numerical investigation of East Coast cyclogenesis during the cold-air damming event of 27-28 February 1982. I - Dynamic and thermodynamic structure

A cyclogenesis event combined with strong cold-air damming, coastal frontogenesis, and extensive mixed precipitation, which occurred on February 27-28, 1982 at the South Carolina coast is investigated numerically. The prestorm environment and subsequent cyclogenesis was simulated using a nested version of the Penn State/NCAR mesoscale model with 35-km fine-mesh resolution. The model was found to successfully reproduce most principal synoptic and mesoscale features associated with this cyclogenesis case, including the storm path and intensification, the coastal front structure, cold-air damming, circulations induced by a polar jet streak, low-level jets, and precipitation. The results of this study reveal the existence of two moist airstreams fed by an onshore flow from the marine boundary layer east of the coastal front.

Lapenta, William M.↗
NASA NTRS1992

Aureole lidar: Design, operation, and comparison with in-situ measurements

In 1986, H. Berber and Hooper examined the signals that could be detected by an airborne lidar flying above the marine boundary layer (MBL). One signal (aureole) formed from laser light returned to the receiver after a reflect off the ocean and forward scatter off the aerosol particles appeared to be both detectable and related to the optical depth of the MBL. Now, research has been directed towards developing a practical instrument to measure the aureole and finding an algorithm to use the information. Unlike the lidar backscatter which typically requires a telescope with a narrow field of view (0.5 mrad), the aureole signal occurs over a wide field of view (50 mrad). To accommodate the totally different needs, a standard commercial Cassegrainian telescope was modified to yield a telescope with two focal planes. The secondary mirror was replaced by a lens, whose front surface was half silvered and curved to match the replaced mirror. Light reflecting off the lens focused behind the primary mirror. The back lens surface was curved to allow unreflected light to focus at the natural focus of the primary mirror. This focal plane which is behind the lens has a wide field of view. To calculate an extinction profile, the aureole optical depth estimate is combined with the lidar backscatter profile.

Hooper, William P.↗
NASA NTRS1990

The diurnal variability of marine stratocumulus clouds

Observations of the diurnal variation of marine stratocumulus clouds obtained during July 1987 as part of the First ISCCP Regional Experiment are described. The observations show a clear diurnal signature in the structure of the cloud-topped marine boundary layer, with a large variation in the height of the cloud base, with lower heights observed at night. The observational results are numerically simulated using a 1D second-moment turbulence-closure model of Koracin and Rogers (1990) for a hydrostatically incompressible fluid. The model results indicate that the differential heating of the cloud layer promotes mixing in the upper part of the cloud and stabilizes the lower part of the layer.

Rogers, David P.↗
NASA NTRS1990

A study of the evolution of the surface heat flux off the southeast coast of the United States during a cold air outbreak using satellite remote sensing data

Attention is given to the contribution of the marine boundary layer to storm development via a study of the evolution of the spatial distribution of the heat flux during a cold-air outburst (CAO) which occurred during the GALE Field Program period in a 550,000-sq-km area off the southeast coast of the United States. The study focuses on a CAO that occurred in the period February 24-26, 1986. During the CAO, the area averaged total surface heat flux ranged from 190 W/sq m to 1114 W/sq m. The high value was characterized by a lower average surface air and dew-point temperatures and a higher average surface wind speed. In general, the surface heat flux increased as the sea-surface temperatures on the continental shelf increased. It reached the maximum over the Gulf Stream, and then decreased over the eastern portions of the Gulf Stream and over the Sargasso Sea. The configuration conforms with some of the earlier findings of Bane and Osgoode (1989) and Blanton et al. (1989).

Vukovich, Fred M.↗
NASA NTRS1994

Dimethylsulfide oxidation over the tropical South Atlantic: OH and other oxidants

The general course of events in the formation of a marine cloud begins with the emission of species which can eventually serve as nuclei around which water can condense to form a cloud droplet. In remote marine regions, cloud condensation nuclei (CCN) are primarily composed of sulfate, in either its acid or ammonium salt form. Most sulfate in these regions is the product of atmospheric oxidation of dimethyl sulfide (DMS), a reduced sulfur gas that is released by phytoplankton at the ocean surface. Therefore, in order to effectively quantify the links in the cloud-formation cycle, one must begin with a well-defined description of the atmospheric chemistry of DMS. The intent of this project has been to initiate development of a comprehensive model of the chemistry and dynamics responsible for the formation of clouds in the remote marine boundary layer. The primary tool in this work has been the Global/Regional Atmospheric Chemistry Event Simulator (GRACES), a global atmospheric chemistry model, which is under development within the Atmospheric Chemistry and Dynamics Branch of NASA-Ames Research Center. In this effort, GRACES was used to explore the first chemical link between DMS and sulfate by modeling the diurnal variation of DMS.

Hemming, Brooke L.↗
NASA NTRS1993

Atmospheric measurements of carbonyl sulfide, dimethyl sulfide, and carbon disulfide using the electron capture sulfur detector

Measurements of atmospheric dimethyl sulfide (DMS), carbonyl sulfide (COS), and carbon disulfide (CS2) were conducted over the Atlantic Ocean on board the NASA Electra aircraft during the Chemical Instrumentation Test and Evaluation (CITE 3) project using the electron capture sulfur detector (ECD-S). The system employed cryogenic preconcentration of air samples, gas chromatographic separation, catalytic fluorination, and electron capture detection. Samples collected for DMS analysis were scrubbed of oxidants with NaOH impregnated glass fiber filters to preconcentration. The detection limits (DL) of the system for COS, DMS, and CS2 were 5, 5, and 2 ppt, respectively. COS concentrations ranged from 404 to 603 ppt with a mean of 489 ppt for measurements over the North Atlantic Ocean (31 deg N to 41 deg N), and from 395 to 437 ppt with a mean of 419 ppt for measurements over the Tropical Atlantic Ocean (11 deg S to 2 deg N). DMS concentrations in the lower marine boundary layer, below 600-m altitude, ranged from below DL to 150 ppt from flights over the North Atlantic, and from 9 to 104 ppt over the Tropical Atlantic. CS2 concentrations ranged from below DL to 29 ppt over the North Atlantic. Almost all CS2 measurements over the Tropical Atlantic were below DL.

Johnson, James E.↗
NASA NTRS1993

A photostationary state analysis of the NO2-NO system based on airborne observations from the subtropical/tropical North and South Atlantic

The Chemical Instrumentation Test and Evaluation 3 (CITE 3) NO-NO2 database has provided a unique opportunity to examine important aspects of tropospheric photochemistry as related to the rapid cycling between NO and NO2. Our results suggest that when quantitative testing of this photochemical system is based on airborne field data, extra precautions may need to be taken in the analysis. This was particularly true in the CITE 3 data analysis where different regional environments produced quite different results when evaluating the photochemical test ratio (NO2)(sub expt)/(NO2)(sub calc), designated here as R(sub E)/R(sub C). The quantity (NO2)(sub Calc) was evaluated using the following photostationary state expression: (NO2)(sub Calc) = k(sub 1)(O3) + k(sub 4)(HO2) + k(sub 5)(CH3O2) + k(sub 6)(RO2))(NO)(sub Expt)/J(sub 2). The four most prominent regional environmental data sets identified in this analysis were those labeled here as free-tropospheric northern hemisphere (FTNH), free-tropospheric tropical northern hemisphere (FTTNH), free-tropospheric southern hemisphere (FTSH), and tropical-marine boundary layer (plume) (TMBL(P)). The respective R(sub E)/R(sub C) mean and median values for these four data subsets were 1.74, 1.69; 3.00, 2.79; 1.01, 0.97; and 0.99, 0.94. Of the four data subsets listed, the two that were statistically the most robust were FTNH and FTSH; for these the respective R(sub E)/R(sub C) mean and standard deviation of the mean values were 1.74 +/- 0.07 and 1.01 +/- 0.04. The FTSH observations were in good agreement with theory, whereas those from the FTNH data set were in significant disagreement. An examination of the critical photochemical parameters O3, UV(zenith), NO, NO2, and non-methane hydrocarbons (NMHCs) for these two databases indicated that the most likely source of the R(sub E)/R(sub C) bias in the FTNH results was the presence of a systematic error in the observational data rather than a shortening in our understanding of fundamental photochemical processes. Although neither a chemical nor meteorological analyses of these data identified this error with complete certainty, they did point to the three most likely possibilities: (1) an NO2 interference from a yet unidentified NO(y) species: (2) the presence of unmeasured hydrocarbons, the integrated reactivity of which would be equivalent to approximately 2.7 parts per billion by volume (ppbv) of toluene; or (3) some combination of points (1) and (2). Details concerning hypotheses (1) and (2) as well as possible ways to minimize these problems in future airborne missions are discussed.

Davis, D. D.↗