Search NASA⌕ Search

SEARCH · Search NASA

Results for “mathematical regularization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Numerical homogenization of concrete microstructures without explicit meshes

Life management of electric hydro or nuclear power plants requires to estimate long-term concrete properties on facilities, for obvious safety and serviceability reasons. Decades-old structures are foreseen to be operational for several more decades. As a large number of different concrete formulations are found in EDF facilities, empirical models based on many experiments cannot be an option for a large fleet of power plant buildings. To build predictive models, homogenization techniques offer an appealing alternative. To properly upscale creep, especially at long term, a rather precise description of the microstructure is required. However, the complexity of the morphology of concrete poses several challenges. In particular, concrete is formulated to maximize the packing density of the granular skeleton, leading to aggregates spanning several length scales with small inter particle spacings. Thus, explicit meshing of realistic concrete microstructures is either out of reach of current meshing algorithms or would produce a number of degrees of freedom far higher than the current generic FEM codes capabilities. This paper proposes a method to deal with complex matrix-inclusions microstructures such as the ones encountered at the mortar or concrete scales, without explicitly meshing them. The microstructure is superimposed to an independent mesh, which is a regular Cartesian grid. This inevitably yields so called 'gray elements', spanning across multiple phases. As the reliability of the estimate of the effective properties highly depends on the behavior affected to these gray elements, special attention is paid to them. As far as the question of the solvers is concerned, generic FEM codes are found to lack efficiency: they cannot reach high enough levels of discretization with classical free meshes, and they do not take advantage of the regular structure of the mesh. Thus, a specific finite differences/finite volumes solver has been developed. At first, generic off-the-shelf linear system solvers were used. To further improve the efficiency in terms of memory requirements, specific variants of the preconditioned conjugate gradient were implemented. This allowed to homogenize the conductivity of a concrete-like microstructure using more than 10{sup 9} degrees of freedom on a rather common hardware for 2010 (a PC embedding 48 GB of RAM). Taking benefit of the properties of the regular Cartesian grid we have also investigated a multi-level method to improve the CPU efficiency of the code.

36 MATERIALS SCIENCE↗

Simple Kinetic Monte Carlo Models for Dissolution Pitting Induced by Crystal Defects

The solid-on-solid kinetic Monte Carlo model of Lasaga and Blum for dislocation- controlled etch pit growth has been extended to the growth of etch pits under the control of multiple dislocations and point defects. This has required the development of algorithms that are 0(103) – O(104) times faster than primitive kinetic Monte Carlo models for surfaces with areas in the range 1024x1024 – 4096x4096 lattice sites. Simulations with multiple line defects indicate that the surface morphology coarsens with increasing time and that the coarsening is more pronounced for large bond-breaking activation energies. For small bond breaking activation energies dissolution enhanced by line defects perpendicular the dissolving surface results in pits with steep sides terminated by deep narrow hollow tubes (nanopipes). Larger bond breaking activation energies lead to shallow pits without deep nanopipes, and if the bond breaking activation energy is large enough, step flow is the primary dissolution mechanism, and pit formation is suppressed. Simplified models that neglect the far field strain energy density but include either a rapidly dissolving core or an empty core lead to results that are qualitatively similar to those obtained using models that include the effects of the far field stress and strain. Simulations with a regular array of line defects show that microscopic random thermal fluctuations play an important role in the coarsening process.

36 MATERIALS SCIENCE↗

CASL Validation Data: An Initial Review

The study aims to establish a comprehensive view of “data” needed for supporting implementation of the Consortium of Advanced Simulation of LWRs (CASL). Insights from this review (and its continual refinement), together with other elements developed in CASL, should provide the foundation for developing the CASL Validation Data Plan (VDP). VDP is instrumental to the development and assessment of CASL simulation tools as predictive capability. Most importantly, to be useful for CASL, the VDP must be devised (and agreed upon by all participating stakeholders) with appropriate account for nature of nuclear engineering applications, the availability, types and quality of CASL-related data, and novelty of CASL goals and its approach to the selected challenge problems. The initial review (summarized on the January 2011 report version) discusses a broad range of methodological issues in data review and Validation Data Plan. Such a top-down emphasis in data review is both needed to see a big picture on CASL data and appropriate when the actual data are not available for detailed scrutiny. As the data become available later in 2011, a revision of data review (and regular update) should be performed. It is expected that the basic framework for review laid out in this report will help streamline the CASL data review in a way that most pertinent to CASL VDP.

97 MATHEMATICS AND COMPUTING↗

LANL Workforce Reporting Tool

The LANL Workforce Reporting Tool compiles and analyzes workforce demographics and attributes as presented in the annual Stockpile and Stewardship Management Plan (SSMP) over FY15-21 using MicroStrategy, a data analytics and visualization software. There are three major employee populations included in the tool: 1) LANL’s regular (permanent) employees; 2) LANL’s entire workforce (regular, craft, contractors, students, post doctorate students, limited term employees, and lab associates); 3) The Nuclear Security Enterprise’s (NSE) permanent career employees (combined and site-by-site).

97 MATHEMATICS AND COMPUTING↗

QUIC-DEPDOSE: Software tools to prepare for and respond to nuclear emergencies

QUIC-DEPDOSE is a software application that calculates radiation doses from inhalation of radionuclides downstream from an atmospheric radiological release. Unlike other radiological modeling software, QUIC-DEPDOSE can provide accurate dose information in as little as an hour running on a regular laptop, allowing for use by emergency responders after an accident.

61 RADIATION PROTECTION AND DOSIMETRY↗

Adjoint-Based Constant-Mass Partial Derivatives

It is well known that the adjoint equation in transport theory provides an economical means of computing derivatives of a system response to system parameters. It is also well known, though not often remarked on, that adjoint-based partial derivatives with respect to mass density are constant-volume derivatives. Likewise, adjoint-based partial derivatives with respect to dimensions (i.e., internal interface locations and the outer system boundary) are constant-density derivatives. In this paper, we derive a formula for the constant-mass partial derivative of a response with respect to internal interface locations and the outer system boundary. The formula uses the partial derivatives for density and dimensions, which may be adjoint-based. This paper includes numerical comparisons for a two-dimensional (r-z) cylinder that also demonstrate the correctness of the regular adjoint-based derivatives for surface locations. Adjoint-based derivatives for the neutron problems were computed using the new SENSMG code at Los Alamos National Laboratory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Regularity underlying complexity: a redshift-independent description of the continuous variation of galaxy-scale molecular gas properties in the mass-star formation rate plane

Star-forming galaxies (SFGs) display a continuous specific star formation rate (sSFR) distribution, which can be approximated by two log-normal functions: one encompassing the galaxy main sequence (MS), and the other a rarer, starbursting population. Starburst (SB) sSFRs can be regarded as the outcome of a physical process (plausibly merging) taking the mathematical form of a log-normal boosting kernel that enhances star formation activity. We explore the utility of splitting the star-forming population into MS and SB galaxies—an approach we term the '2-Star Formation Mode' framework—for understanding their molecular gas properties. Star formation efficiency (SFE) and gas fraction variations among SFGs take a simple redshift-independent form, once these quantities are normalized to the corresponding values for average MS galaxies. SFE enhancements during SB episodes scale supra-linearly with the SFR increase, as expected for mergers. Consequently, galaxies separate more clearly into loci for SBs and normal galaxies in the Schmidt-Kennicutt plane than in (s)SFR versus M {sub *} space. SBs with large deviations (>10 fold) from the MS, e.g., local ULIRGs, are not average SBs, but are much rarer events whose progenitors had larger gas fractions than typical MS galaxies. Statistically, gas fractions in SBs are reduced two- to threefold compared to their direct MS progenitors, as expected for short-lived SFR boosts where internal gas reservoirs are depleted more quickly than gas is re-accreted from the cosmic web. We predict variations of the conversion factor α{sub CO} in the SFR-M {sub *} plane and we show that the higher sSFR of distant galaxies is directly related to their larger gas fractions.

79 ASTRONOMY AND ASTROPHYSICS↗

Permeability computation on a REV with an immersed finite element method

An efficient method to compute permeability of fibrous media is presented. An immersed domain approach is used to represent the porous material at its microscopic scale and the flow motion is computed with a stabilized mixed finite element method. Therefore the Stokes equation is solved on the whole domain (including solid part) using a penalty method. The accuracy is controlled by refining the mesh around the solid-fluid interface defined by a level set function. Using homogenisation techniques, the permeability of a representative elementary volume (REV) is computed. The computed permeabilities of regular fibre packings are compared to classical analytical relations found in the bibliography.

36 MATERIALS SCIENCE↗

Regular zeros of quadratic maps and their application

Sufficient conditions for the existence of regular zeros of quadratic maps are obtained. Their applications are indicated to certain problems of analysis related to the inverse function theorem in a neighbourhood of an abnormal point. Bibliography: 13 titles.

97 MATHEMATICS AND COMPUTING↗

Regular black holes: Electrically charged solutions, Reissner-Nordstroem outside a de Sitter core

To have the correct picture of a black hole as a whole, it is of crucial importance to understand its interior. The singularities that lurk inside the horizon of the usual Kerr-Newman family of black hole solutions signal an endpoint to the physical laws and, as such, should be substituted in one way or another. A proposal that has been around for sometime is to replace the singular region of the spacetime by a region containing some form of matter or false vacuum configuration that can also cohabit with the black hole interior. Black holes without singularities are called regular black holes. In the present work, regular black hole solutions are found within general relativity coupled to Maxwell's electromagnetism and charged matter. We show that there are objects which correspond to regular charged black holes, whose interior region is de Sitter, whose exterior region is Reissner-Nordstroem, and the boundary between both regions is made of an electrically charged spherically symmetric coat. There are several types of solutions: regular nonextremal black holes with a null matter boundary, regular nonextremal black holes with a timelike matter boundary, regular extremal black holes with a timelike matter boundary, and regular overcharged stars with a timelike matter boundary. The main physical and geometrical properties of such charged regular solutions are analyzed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Epi-Regularization of Risk Measures

Uncertainty pervades virtually every branch of science and engineering, and in many disciplines, the underlying phenomena can be modeled by partial differential equations (PDEs) with uncertain or random inputs. This work is motivated by risk-averse stochastic programming problems constrained by PDEs. These problems are posed in infinite dimensions, which leads to a significant increase in the scale of the (discretized) problem. In order to handle the inherent nonsmoothness of, for example, coherent risk measures and to exploit existing solution techniques for smooth, PDE-constrained optimization problems, we propose a variational smoothing technique called epigraphical (epi-)regularization. Here, we investigate the effects of epi-regularization on the axioms of coherency and prove differentiability of the smoothed risk measures. In addition, we demonstrate variational convergence of the epi-regularized risk measures and prove the consistency of minimizers and first-order stationary points for the approximate risk-averse optimization problem. We conclude with numerical experiments confirming our theoretical results.

97 MATHEMATICS AND COMPUTING↗

The eXtended virtual element method for elliptic problems with weakly singular solutions

This paper introduces a novel eXtended virtual element method, an extension of the conforming virtual element method. The X-VEM is formulated by incorporating appropriate enrichment functions in the local spaces. The method is designed to handle highly generic enrichment functions, including singularities arising from fractured domains. By achieving consistency on the enrichment space, the method is proven to achieve arbitrary approximation orders even in the presence of singular solutions. The paper includes a complete convergence analysis under general assumptions on mesh regularity, and numerical experiments validating the method’s accuracy on various mesh families, demonstrating optimal convergence rates in the L 2 - and H 1 - norms on fractured or L-shaped domains.

97 MATHEMATICS AND COMPUTING↗

Logarithmic enhancements in conformal perturbation theory and their real time interpretation

We study various corrections of correlation functions to leading order in conformal perturbation theory, both on the cylinder and on the plane. Many problems on the cylinder are mathematically equivalent to those in the plane if we give the perturbations a position dependent scaling profile. The integrals to be done are then similar to those in the study of correlation functions with one additional insertion at the center of the profile. We will be primarily interested in the divergence structure of these corrections when computed in dimensional regularization. In particular, we show that the logarithmic divergences (enhancements) that show up in the plane under these circumstances can be understood in terms of resonant behavior in time dependent perturbation theory, for a transition between states that is induced by an oscillatory perturbation on the cylinder.

Physics↗

Atoms confined by very thin layers

The Hamiltonian of an atom with N electrons and a fixed nucleus of infinite mass between two parallel planes is considered in the limit when the distance a between the planes tends to zero. We show that this Hamiltonian converges in the norm resolvent sense to a Schrödinger operator acting effectively in L{sup 2}(R{sup 2N}) whose potential part depends on a. Moreover, we prove that after an appropriate regularization this Schrödinger operator tends, again in the norm resolvent sense, to the Hamiltonian of a two-dimensional atom (with the three-dimensional Coulomb potential-one over distance) as a → 0. This makes possible to locate the discrete spectrum of the full Hamiltonian once we know the spectrum of the latter one. Our results also provide a mathematical justification for the interest in the two-dimensional atoms with the three-dimensional Coulomb potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cox rings, semigroups and automorphisms of affine algebraic varieties

We study the Cox realization of an affine variety, that is, a canonical representation of a normal affine variety with finitely generated divisor class group as a quotient of a factorially graded affine variety by an action of the Neron-Severi quasitorus. The realization is described explicitly for the quotient space of a linear action of a finite group. A universal property of this realization is proved, and some results in the divisor theory of an abstract semigroup emerging in this context are given. We show that each automorphism of an affine variety can be lifted to an automorphism of the Cox ring normalizing the grading. It follows that the automorphism group of an affine toric variety of dimension {>=}2 without nonconstant invertible regular functions has infinite dimension. We obtain a wild automorphism of the three-dimensional quadratic cone that rises to the Anick automorphism of the polynomial algebra in four variables. Bibliography: 22 titles.

97 MATHEMATICS AND COMPUTING↗

Arrangements of codimension-one submanifolds

We study the number f of connected components in the complement to a finite set (arrangement) of closed submanifolds of codimension 1 in a closed manifold M. In the case of arrangements of closed geodesics on an isohedral tetrahedron, we find all possible values for the number fof connected components. We prove that the set of numbers that cannot be realized by the number f of an arrangement of n {>=} 71 projective planes in the three-dimensional real projective space is contained in the similar known set of numbers that are not realizable by arrangements of n lines on the projective plane. For Riemannian surfaces M we express the number f via a regular neighbourhood of a union of immersed circles and the multiplicities of their intersection points. For m-dimensional Lobachevskii space we find the set of all possible numbers f for hyperplane arrangements. Bibliography: 18 titles.

97 MATHEMATICS AND COMPUTING↗