SEARCH · Search NASA

Results for “method development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Development of AFE aerobrake aerothermodynamic data book

The computation method developed for the NASA Aeroassist Flight Experiment (AFE) data book generates a design reference for the AFE's aerothermodynamic environment using an optimized technology for a 4100-lb vehicle. This environment is defined by convective, radiative, and total heating rates, radiation equilibrium temperatures, and local surface pressures along the AFE pitch-plane and associated off-pitch planes. The Boundary Layer Integral Matrix Procedure is the major program code used in this analysis; a partially catalytic wall was assumed on the basis of measured recombination rates.

Ting, Paul C.↗

NASA NTRS1983

Combustion hot section technology

The overall objective of the Turbine Engine Hot Section Technology Combustion Project is to develop and verify improved and more accurate analysis methods for increasing the ability to design with confidence the combustion system for advanced aircraft turbine engines. The analysis methods developed will be generically applicable to combustion systems and not restricted to one specific engine or manufacturer. This project's approach was to first assess and evaluate existing combustor aerothermal analysis models by means of a contracted effort initiated during FY 1982. This evaluation effort has assessed and quantified known models' strengths and deficiencies. During FY 1984 the Aerothermal Modeling Program, Phase 2 will be initiated, which is expected to have contracted model development efforts in the areas of improved numerical methods for turbulent viscous flows, flow interactions, and fuel spray flow foekd interactions. A Phase 3 effort is planned to address remaining model deficiencies. The primary inhouse effort in this area will be the determination of high pressure flame radiation characteristics in a full annular combustor. This experiment will be conducted in the NASA LeRC High Pressure Facility with the results compiled into a comprehensive flame radiation and liner heat flux model.

Ercegovic, D. B.↗

DOE OSTI2024

MSD CoP Webinar: AI and Extreme Events - Overcoming Data Challenges for Improved Characterization of Climate Extremes

Context: This webinar was hosted by the MultiSector Dynamics Community of Practice (MSD CoP; https://multisectordynamics.org). Abstract: Artificial Intelligence (AI) models require large volumes of data for training and testing. Data requirements present challenges for using AI to explore extreme events with limited observational data. This webinar will showcase two innovative methods developed by part of the European Climate Intelligence (CLINT) project to overcome data challenges and harness AI to improve our understanding of climate extremes. Dr. Ascenso will present his research on data augmentation methods to improve estimates of tropical cyclones using satellite data. His presentation will review established methods for data augmentation and explore opportunities and challenges for using generative AI to generate images of extreme, life-threatening tropical cyclones. Next, Dr. Plesiat will present his research on deep learning techniques to overcome limited observational data sets. His presentation will illustrate deep learning methods to develop AI reconstructions of four climate indices across Europe. Presenters : Dr. Guido Ascenso (post-doctoral researcher, Politecnico di Milano); Dr. Étienne Plésiat (German Climate Computing Centre - DKRZ) Moderator(s): Stefano Galelli (MSD CoP WG Co-Lead), David Gold (MSD CoP WG Co-Lead), Jillian Sturtevant (MSD CoP WG Communications Officer), Matteo Giuliani (Politecnico di Milano, MSD CoP WG Member, Moderator and Organizer) This webinar was held on: October 11, 2024 from 11AM - 1PM ET

AI↗

DOE OSTI2021

Combustion chemistry in the twenty-first century: Developing theory-informed chemical kinetics models

Over the past 20 to 25 years theoretical chemistry (particularly theoretical chemical kinetics) has played an increasingly important role in developing chemical kinetics models for combustion. Theoretical methods of obtaining rate parameters are now competitive in accuracy with experiment, particularly for small molecules. Moreover, theoretical methods can deal with conditions that experiments frequently cannot. In addition to increased accuracy, theory has rejuvenated methods and discovered phenomena that were completely unappreciated, or at least underappreciated, in the 20th century. Our primary interest here is in molecular-level issues, i.e. in calculating rate and transport parameters. However, dealing with kinetics models that involve thousands of reactions and hundreds of species is important for practical applications and is relatively new to the 21st century. Theory, in a general sense, and theoretical methods development have a role to play here too. We discuss in this review all these topics in some detail with an emphasis on issues and methods that have emerged in the last 20 years or so. Even so, our review is selective, rather than comprehensive, out of necessity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1987

Optimum vibration control of flexible beams by piezo-electric actuators

The utilization of piezoelectric actuators in controlling the structural vibrations of flexible beams is examined. A Modified Independent Modal Space Control (MIMSC) method is devised to enable the selection of the optimal location, control gains and excitation voltage of the piezoelectric actuators in a way that would minimize the amplitudes of vibrations of beams to which these actuators are bonded, as well as the input control energy necessary to suppress these vibrations. The developed method accounts for the effects that the piezoelectric actuators have on changing the elastic and inertial properties of the flexible beams. Numerical examples are presented to illustrate the application of the developed MIMSC method in minimizing the structural vibrations of beams of different materials when subjected to different loading and end conditions using ceramic or polymeric piezoelectric actuators. The obtained results emphasize the importance of the devised method in designing more realistic active control systems for flexible beams, in particular, and large flexible structures in general.

Baz, A.↗

NASA NTRS1988

Optimum vibration control of flexible beams by piezo-electric actuators

Baz, A.↗

NASA NTRS1990

Experimental performance and acoustic investigation of modern, counterrotating blade concepts

The aerodynamic, acoustic, and aeromechanical performance of counterrotating blade concepts were evaluated both theoretically and experimentally. Analytical methods development and design are addressed. Utilizing the analytical methods which evolved during the conduct of this work, aerodynamic and aeroacoustic predictions were developed, which were compared to NASA and GE wind tunnel test results. The detailed mechanical design and fabrication of five different composite shell/titanium spar counterrotating blade set configurations are presented. Design philosophy, analyses methods, and material geometry are addressed, as well as the influence of aerodynamics, aeromechanics, and aeroacoustics on the design procedures. Blade fabrication and quality control procedures are detailed; bench testing procedures and results of blade integrity verification are presented; and instrumentation associated with the bench testing also is identified. Additional hardware to support specialized testing is described, as are operating blade instrumentation and the associated stress limits. The five counterrotating blade concepts were scaled to a tip diameter of 2 feet, so they could be incorporated into MPS (model propulsion simulators). Aerodynamic and aeroacoustic performance testing was conducted in the NASA Lewis 8 x 6 supersonic and 9 x 15 V/STOL (vertical or short takeoff and landing) wind tunnels and in the GE freejet anechoic test chamber (Cell 41) to generate an experimental data base for these counterrotating blade designs. Test facility and MPS vehicle matrices are provided, and test procedures are presented. Effects on performance of rotor-to-rotor spacing, angle-of-attack, pylon proximity, blade number, reduced-diameter aft blades, and mismatched rotor speeds are addressed. Counterrotating blade and specialized aeromechanical hub stability test results are also furnished.

Hoff, G. E.↗

NASA NTRS1983

A direct method for the solution of unsteady two-dimensional incompressible Navier-Stokes equations

The unsteady incompressible Navier-Stokes equations are formulated in terms of vorticity and stream function in generalized curvilinear orthogonal coordinates to facilitiate analysis of flow configurations with general geometries. The numerical method developed solves the conservative form of the transport equation using the alternating-direction implicit method, whereas the stream-function equation is solved by direct block Gaussian elimination. The method is applied to a model problem of flow over a back-step in a doubly infinite channel, using clustered conformal coordinates. One-dimensional stretching functions, dependent on the Reynolds number and the asymptotic behavior of the flow, are used to provide suitable grid distribution in the separation and reattachment regions, as well as in the inflow and outflow regions. The optimum grid distribution selected attempts to honor the multiple length scales of the separated-flow model problem. The asymptotic behavior of the finite-differenced transport equation near infinity is examined and the numerical method is carefully developed so as to lead to spatially second-order accurate wiggle-free solutions, i.e., with minimum dispersive error. Results have been obtained in the entire laminar range for the backstep channel and are in good agreement with the available experimental data for this flow problem.

Ghia, K. N.↗

NASA NTRS2010

Statistical Model Selection for TID Hardness Assurance

Radiation Hardness Assurance (RHA) methodologies against Total Ionizing Dose (TID) degradation impose rigorous statistical treatments for data from a part's Radiation Lot Acceptance Test (RLAT) and/or its historical performance. However, no similar methods exist for using "similarity" data - that is, data for similar parts fabricated in the same process as the part under qualification. This is despite the greater difficulty and potential risk in interpreting of similarity data. In this work, we develop methods to disentangle part-to-part, lot-to-lot and part-type-to-part-type variation. The methods we develop apply not just for qualification decisions, but also for quality control and detection of process changes and other "out-of-family" behavior. We begin by discussing the data used in ·the study and the challenges of developing a statistic providing a meaningful measure of degradation across multiple part types, each with its own performance specifications. We then develop analysis techniques and apply them to the different data sets.

Ladbury, R.↗

NASA NTRS1999

A TRMM Rainfall Estimation Method Applicable to Land Areas

Methods developed to estimate rain rate on a footprint scale over land with the satellite-borne multispectral dual-polarization Special Sensor Microwave Imager (SSM/1) radiometer have met with limited success. Variability of surface emissivity on land and beam filling are commonly cited as the weaknesses of these methods. On the contrary, we contend a more significant reason for this lack of success is that the information content of spectral and polarization measurements of the SSM/I is limited. because of significant redundancy. As a result, the complex nature and vertical distribution C, of frozen and melting ice particles of different densities, sizes, and shapes cannot resolved satisfactorily. Extinction in the microwave region due to these complex particles can mask the extinction due to rain drops. Because of these reasons, theoretical models that attempt to retrieve rain rate do not succeed on a footprint scale. To illustrate the weakness of these models, as an example we can consider the brightness temperature measurement made by the radiometer in the 85 GHz channel (T85). Models indicate that T85 should be inversely related to the rain rate, because of scattering. However, rain rate derived from 15-minute rain gauges on land indicate that this is not true in a majority of footprints. This is also supported by the ship-borne radar observations of rain in the Tropical Oceans and Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA-COARE) region over the ocean. Based on these observations. we infer that theoretical models that attempt to retrieve rain rate do not succeed on a footprint scale. We do not follow the above path of rain retrieval on a footprint scale. Instead, we depend on the limited ability of the microwave radiometer to detect the presence of rain. This capability is useful to determine the rain area in a mesoscale region. We find in a given rain event that this rain area is closely related to the mesoscale-average rain rate. Based on this observation, in this study we have developed a method to estimate the mesoscale-average rain rate over land utilizing microwave radiometer data. Because of the high degree of geographic and seasonal variability in the nature and intensity of rain, this method requires some tuning with 15-minute rain gauge data on land. After tuning the method, it can be applied to an independent set of rain events that are close in time and space. We find that the mesoscale rain rates retrieved over the period of a month on land with this method shows a correlation of about 0.85 with respect to the surface rain-gauge observations. This mesoscale-average rain rate estimation method can be useful to extend the spatial and temporal coverage of the rainfall data provided by the Precipitation Radar on board the Tropical Rainfall Measuring Mission (TRMM) satellite.

Prabhakara, C.↗

NASA NTRS1978

Development of advanced methods for continuous Czochralski growth. Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

The three components required to modify the furnace for batch and continuous recharging with granular silicon were designed. The feasibility of extended growth cycles up to 40 hours long was demonstrated by a recharge simulation experiment; a 6 inch diameter crystal was pulled from a 20 kg charge, remelted, and pulled again for a total of four growth cycles, 59-1/8 inch of body length, and approximately 65 kg of calculated mass.

Wolfson, R. G.↗

DOE OSTI2024

Direct detection system for full-field nanoscale X-ray diffraction-contrast imaging

Recent developments in X-ray science provide methods to probe deeply embedded mesoscale grain structures and spatially resolve them using dark field X-ray microscopy (DFXM). Extending this technique to investigate weak diffraction signals such as magnetic systems, quantum materials and thin films prove challenging due to available detection methods and incident X-ray flux at the sample. We present a direct detection method developed in conjunction with KAImaging which focuses on DFXM studies in the hard X-ray range of 10s of keV and above capable of approaching nanoscale resolution. Additionally, we compare this direct detection scheme with routinely used scintillator-based optical detection and achieve an order of magnitude improvement in exposure times allowing for imaging of weakly diffracting ordered systems.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

Electrochemical Synthesis of Monodisperse Platinum-Cobalt Nanocrystals

The synthesis of platinum-cobalt nanocrystals (NCs) using colloidal solvothermal techniques is well understood. However, for monodisperse NCs to form, high temperatures and environmentally detrimental solvents are needed. We report a room temperature, aqueous method of platinum-cobalt NC synthesis using electrochemical reduction as the driving force for nucleation and growth. It is found that colloidal NCs will form in both the presence and absence of surfactant. Additionally, we report a monodisperse electrochemical deposition of NCs utilising a transparent conducting oxide electrode. The methods developed here will allow for a synthetic method to produce nanocatalysts with minimal environmental impact and should be readily applicable to other NC systems, including single- and multi-component alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Favipiravir Flow Synthesis

Researchers at Los Alamos have invented a novel flow/batch chemistry synthetic process to produce the small molecule anti-viral favipiravir more cheaply and rapidly to enable on-demand production for pandemic response. Current methods for synthesizing favipiravir are constrained by long reaction times and low yields. If ongoing clinical trials for favipiravir demonstrate its effectiveness as a COVID-19 antiviral, and as a broad spectrum anti-viral for treating future viral outbreaks, this synthesis would help alleviate potential drug shortages and supply chain issues for the manufacturing and availability of this small molecule anti-viral. This U.S.-based synthesis route would be capable of scale-up for making large (kilogram) amounts of favipiravir as needed to assist with clinical trial needs and demand for patient treatment, and can also produce isotopically labeled favipiravir. We are seeking a CRADA partner to finalize method development who has interest in licensing the method and employing it for domestic production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1962

Free-Flight Tests of Fifth-Stage Scout Entry Vehicle at Mach Numbers of 5 and 17

Measurements have been made in air at two Mach numbers of the static stability, normal force, and drag of a version of the fifth-stage Scout entry vehicle. The most significant result was that the design center of gravity led to a condition of static instability at small angles of attack at Mach number 17. At this Mach number, the static stability was a highly nonlinear function of the angle of attack. A useful method for analyzing free-flight data having this nonlinear behavior is included in this report. Comparisons were made between the measured aerodynamic coefficients and those estimated by Newtonian impact theory and by a method developed by Seiff and Whiting. The latter method gave good estimates of the normal-force-curve slope at both Mach numbers and of the moment-curve slope at the lower Mach number. It resulted in an overestimation of the static stability at Mach number 17, although it gave results decidedly closer to the experimental value than did Newtonian impact theory.

FREE FLIGHT↗

NASA NTRS1992

Orbiter attitude design for the Astro-1 Spacelab mission

The methods utilized to design orbiter attitudes that satisfied the various Space Shuttle program and payload constraints of the Astro-1 Spacelab astronomy mission are described. The premission methods developed for attitude design and how those methods were applied to accomplish the large amount of real-time replanning required during the flight are presented. Some of the attitude concerns for Astro-1 included orbiter window thermal constraints, two separate telescope fields-of-view, tracking and data relay satellite Ku-band access, and telescope sun avoidance.

Olsen, C. D.↗

NASA NTRS1952

A simple numerical method for the calculation of the laminar boundary layer

An iteration difference method for the calculation of the incompressible laminar boundary layer is described. The method uses Prandtl's boundary layer equation and the boundary conditions directly and permits the attainment of an arbitrary accuracy. The method has been tested successfully in the continuation of the Blasius profile on the flat plate, on the circular cylinder investigated by Heimenz and on an elliptical cylinder of fineness ratio 1:4. The method makes possible the testing of previously developed methods, all of which contain important assumptions.

BOUNDARY LAYER, LAMINAR - CALCULATIONS - SCHRODER ↗

NASA NTRS1995

Bringing the cross-correlation method up to date

The cross-correlation (XC) method of Tonry & Davis (1979, AJ, 84, 1511) is generalized to arbitrary parametrized line profiles. In the new algorithm the correlation function itself, rather than the observed galaxy spectrum, is fitted by the model line profile: this removes much of the complication in the error analysis caused by template mismatch. Like the Fourier correlation quotient (FCQ) method of Bender (1990, A&A, 229, 441), the inferred line profiles are, up to a normalization constant, independent of template mismatch as long as there are no blended lines. The standard reduced chi(exp 2) is a good measure of the fit of the inferred velocity distribution, largely decoupled from the fit of the spectral template. The updated XC method performs as well as other recently developed methods, with the added virtue of conceptual simplicity.

Statler, Thomas↗