Search NASA⌕ Search

SEARCH · Search NASA

Results for “mixture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Effective permittivity of dielectric mixtures

General mixing formulas are derived for discrete scatterers immersed in a host medium. The inclusion particles are assumed to be ellipsoidal. The electric field inside the scatterers is determined by quasi-static analysis, assuming the diameter of the inclusion particles to be much smaller than one wavelength. The results are applicable to general multiphase mixtures, and the scattering ellipsoids of the different phases can have different sizes and arbitrary ellipticity distribution and axis orientation, i.e., the mixture may be isotropic or anisotropic. The resulting mixing formula is nonlinear and is suitable for iterative solutions. The formula contains a quantity called the apparent permittivity, and with different choices of this quantity, the result leads to the generalized Lorentz-Lorenz formula, the generalized Polder-van Santen formula, and the generalized coherent potential-quasicrystalline approximation formula. The results are applied to calculating the complex effective permittivity of dry and wet snow, and sea ice.

Sihvola, Ari H.↗

Penning gas mixtures for improving the energy resolution of proportional counters

An experimental investigation of the Penning effect in both argon and xenon has been carried out with a variety of quench gases of different ionization potentials. Acetylene with argon and trimethylamine with xenon show the strongest true Penning effect, returning very high gas gains for a given voltage and improved energy resolution over more conventional mixtures. Data for these mixtures, as well as others exhibiting weaker metastable effects, nonmetastable Penning effects, and charge transfer through photoionization, are presented.

Agrawal, P. C.↗

Densities of some molten fluoride salt mixtures suitable for heat storage in space power applications

Liquid densities were determined for a number of fluoride salt mixtures suitable for heat storage in space power applications, using a procedure that consisted of measuring the loss of weight of an inert bob in the melt. The density apparatus was calibrated with pure LiF and NaF at different temperatures. Density data for safe binary and ternary fluoride salt eutectics and congruently melting intermediate compounds are presented. In addition, a comparison was made between the volumetric heat storage capacity of different salt mixtures.

Misra, Ajay K.↗

Variable-mixture-ratio and other rocket engines for advanced shuttles

Previous computer models of rocket engines and single-stage-to-orbit vehicles have been extended to include variable-mixture-ratio engines. The model has been applied to study a vertical-takeoff, horizontal-landing, winged, manned, fully-reusable vehicle with a payload of 13.6 Mg and which is launched to low-earth orbit. Both single-stage and two-stage vehicles are considered, with special attention given to hydrogen, methane, and propane engines with staged-combustion cycles. Results are presented for the optimum nozzle exit pressure, thrust split between the booster and orbiter, chamber pressure, and mixture ratio.

Martin, James A.↗

High/variable mixture ratio oxygen/hydrogen engines

A LOX/LH2 high/variable mixture ratio booster upper stage is described. The engine has high thrust-weight ratio as a booster and high specific impulse as an upper stage engine. Operation at high mixture ratio utilizes the propellants at high bulk density. The engine may use multiple turbopump-preburners for higher thrust ratings. The engine uses the full flow cycle to obtain minimum turbine inlet temperatures for a given chamber pressure and to avoid interpropellant shaft seals and other single point failure modes. A portion of the liquid hydrogen is used to regeneratively cool the thrust chamber assembly. The warmed hydrogen coolant is then used to drive the fuel boost turbopump. All propellants arrive at the gas-gas injector ready to burn. Shear mixing of the parallel flowing high velocity, low density fuel-rich gases with the high density, low velocity oxidizer-rich gases provides complete combustion with a modest chamber volume. Combustion stability is assured by the injection of the heated fuel-rich gases and the comparatively low volume ratio of the propellants before and after combustion. The high area ratio nozzle skirt is fitted with a low area ratio nozzle skirt insert for optimum low altitude performance. The overall engine characteristics make it a candidate for ALS, Shuttle-C, LRB, and SSTO applications.

Knuth, William H.↗

High variable mixture ratio oxygen/hydrogen engine

The ability of an O2/H2 engine to operate over a range of high-propellant mixture ratios was previously shown to be advantageous in single stage to orbit (SSTO) vehicles. The results are presented for the analysis of high-performance engine power cycles operating over propellant mixture ratio ranges of 12 to 6 and 9 to 6. A requirement to throttle up to 60 percent of nominal thrust was superimposed as a typical throttle range to limit vehicle acceleration as propellant is expended. The object of the analysis was to determine areas of concern relative to component and engine operability or potential hazards resulting from the operating requirements and ranges of conditions that derive from the overall engine requirements. The SSTO mission necessitates a high-performance, lightweight engine. Therefore, staged combustion power cycles employing either dual fuel-rich preburners or dual mixed (fuel-rich and oxygen-rich) preburners were examined. Engine mass flow and power balances were made and major component operating ranges were defined. Component size and arrangement were determined through engine layouts for one of the configurations evaluated. Each component is being examined to determine if there are areas of concern with respect to component efficiency, operability, reliability, or hazard. The effects of reducing the maximum chamber pressure were investigated for one of the cycles.

Erickson, C. M.↗

Photometric phase functions of common geologic minerals and applications to quantitative analysis of mineral mixture reflectance spectra

The mass fractional abundance of components in intimately mixed, particulate surfaces is calculated from laboratory reflectance spectra using Hapke's (1981) model for bidirectional reflectance. It is found that a simplified version of the model is accurate to within 7 percent for mixtures not containing low albedo components. The model is not appropriate for mixtures with very low and high albedo components. Consideration is given to the possible improvement of the method's accuracy by using an empirical single-particle phase function to describe the scattering characteristics of all minerals, or by solving for the single-particle phase function of the minerals involved exactly using extensive bidirectional reflectance measurements and Hapke's equations for bidirectional reflectance. Also, the results are used to examine the general scattering behavior of particulate mineral surfaces.

Mustard, John F.↗

Formation of particulates by ion bombardment of cryogenic ice mixtures

An analysis of the particulates which form upon the bombardment of a gaseous mixture reflecting cosmic molecular abundances with H2(+) ions accelerated at 350 keV. The model of Black and Dalgarno (1977) for the Zeta Oph cloud and an observational determination of the interstellar Ar abundances (Simpson et al., 1986) are used to determine the abundances of the gas mixture. The characteristics of the resulting residue are examined, including photographs and absorbance spectra. The possible astrophysical implications of the experiment are discussed.

Wdowiak, T. J.↗

Laser induced spark ignition of methane-oxygen mixtures

Results from an experimental study of laser induced spark ignition of methane-oxygen mixtures are presented. The experiments were conducted at atmospheric pressure and 296 K under laminar pre-mixed and turbulent-incompletely mixed conditions. A pulsed, frequency doubled Nd:YAG laser was used as the ignition source. Laser sparks with energies of 10 mJ and 40 mJ were used, as well as a conventional electrode spark with an effective energy of 6 mJ. Measurements were made of the flame kernel radius as a function of time using pulsed laser shadowgraphy. The initial size of the spark ignited flame kernel was found to correlate reasonably well with breakdown energy as predicted by the Taylor spherical blast wave model. The subsequent growth rate of the flame kernel was found to increase with time from a value less than to a value greater than the adiabatic, unstretched laminar growth rate. This behavior was attributed to the combined effects of flame stretch and an apparent wrinkling of the flame surface due to the extremely rapid acceleration of the flame. The very large laminar flame speed of methane-oxygen mixtures appears to be the dominant factor affecting the growth rate of spark ignited flame kernels, with the mode of ignition having a small effect. The effect of incomplete fuel-oxidizer mixing was found to have a significant effect on the growth rate, one which was greater than could simply be accounted for by the effect of local variations in the equivalence ratio on the local flame speed.

Santavicca, D. A.↗

Stimulated Raman-scattering threshold behavior of binary mixture micrometer-sized droplets

Stimulated Raman scattering (SRS) from binary liquid mixture micrometer-sized droplets irradiated by nanosecond laser pulses exhibits previously unreported features. SRS emission at wavelength shifts corresponding to combination frequencies of the individual component Stokes shifts are observed in droplets but not in bulk mixtures. Furthermore, droplet SRS thresholds are determined by component refractive indices and concentrations, in contrast to bulk thresholds, for which self-focusing likely plays a dominant role.

Biswas, Abhijit↗

Ammonia-water mixtures at high pressures - Melting curves of ammonia dihydrate and ammonia monohydrate and a revised high-pressure phase diagram for the water-rich region

The phase relations of some mixtures of ammonia and water are investigated to create a phase diagram in pressure-temperature-composition space relevant to the geophysical study of bodies in the outer solar system. The mixtures of NH3(x)H2O(1-x), where x is greater than 0.30 but less than 0.51, are examined at pressures and temperatures ranging from 0-6.5 GPa and 125-400 K, respectively. The ruby luminescence technique monitors the pressure and a diamond-anvil cell compresses the samples, and the phases are identified by means of normal- and polarized-light optical microscopy. The melting curve for NH3H2O(2) is described by the equation T = 176 + 60P - 8.5P squared for the ranges of 0.06-1.4 GPa and 179-243 K. The equation for NH3H2O is T = 194 + 37P - P squared, which represents a minor correction of a previous description by Johnson et al. (1985). Observed phase transitions are consistent with the high-pressure stability limit of NH3H2O(2), and the transition boundary is found to be linear.

Boone, S.↗

Detonation of cryogenic gaseous hydrogen-oxygen mixtures

The accidental mixing and detonation of oxygen-hydrogen mixtures is a serious aerospace industry hazard. The detonation characteristics of cryogenic mixtures of gaseous hydrogen and oxygen have accordingly been studied at various initial pressures and equivalence ratios at 100 K, and the results compared with numerical computations of idealized, steady-state, one-dimensional Zeldovich-von Neumann-Doering detonation structure with detailed chemical reaction kinetics. The predictions thus obtained for critical tube diameter, on the basis of calculated reaction-zone thickness, are found to agree reasonably well with experimental data.

Plaster, M.↗

A progressive data compression scheme based upon adaptive transform coding: Mixture block coding of natural images

A method for efficiently coding natural images using a vector-quantized variable-blocksized transform source coder is presented. The method, mixture block coding (MBC), incorporates variable-rate coding by using a mixture of discrete cosine transform (DCT) source coders. Which coders are selected to code any given image region is made through a threshold driven distortion criterion. In this paper, MBC is used in two different applications. The base method is concerned with single-pass low-rate image data compression. The second is a natural extension of the base method which allows for low-rate progressive transmission (PT). Since the base method adapts easily to progressive coding, it offers the aesthetic advantage of progressive coding without incorporating extensive channel overhead. Image compression rates of approximately 0.5 bit/pel are demonstrated for both monochrome and color images.

Rost, Martin C.↗

The influence of Lewis number and nonhomogeneous mixture on premixed turbulent flame structure

The structure of a premixed flame front in two-dimensional turbulence is investigated using full numerical simulation including heat release, variable fluid properties, and one-step Arrhenius chemistry. Non-unity Lewis number (Le) effects are described by comparing the local instantaneous turbulent flame structure to the steady one dimensional laminar flame structure for the same thermochemical parameters. Flame surface area, mean reactant consumption rate per unit area of flame, turbulent flame speed, and statistical descriptions of the flame geometry are also reported. Principal findings are that the local flame structure correlates strongly with the local flame curvature, while global properties depend both on strain and on curvature. Preliminary results for cases with nonhomogeneous reactant mixture strength are reported. Here, the emphasis is on the ability of a propagating flame to recover after encountering a fuel-lean pocket in an otherwise homogeneous mixture. Both one dimensional and two dimensional cases are described.

Haworth, D. C.↗

A finite mixtures algorithm for finding classes in images

The authors describe an algorithm for estimating the proportions of classes in a SAR (synthetic aperture radar) image without any user interaction. The method assumes that the image is a mixture of a known number of different pixel types. A maximum likelihood estimate of the parameters of the resulting mixture distribution is then used to find the proportions for the various classes. The technique was successfully applied to aircraft SAR images of sea ice. Computer simulations were used to determine the relative errors of the technique. The technique performs well even with extremely noisy images.

Samadani, Ramin↗

Reflectance spectroscopy of palagonite and iron-rich montmorillonite clay mixtures - Implications for the surface composition of Mars

The diffuse reflectance spectra of Hawaiian palagonite mixtures with an Fe-rich montmorillonite have prompted their present use as spectral analogs of the Martian surface. Like the Mars spectrum and unlike clays, the 2.2-micron reflectance spectrum absorption band is not present in the palagonite sample; neither is the 2.2-micron Al-OH clay lattice band seen in palagonite-montmorillonite mixtures, where the latter component remains below 15 wt pct. Fe-rich montmorillonite clay may therefore be present in Mars, in combination with palagonite, while remaining undetected in remotely sensed spectra.

Orenberg, James↗

Benard convection in binary mixtures with Soret effects and solidification

Benard convection was studied in a two-component liquid which displayed Soret effects (Soret, 1879; DeGroot and Mazur, 1969) and in which the temperatures of the horizontal boundaries spanned the solidification temperature of the mixture. A steady basic state was observed, in which the layer is partly liquid (near the lower, heated plate) and partly solid (near the upper, cooled plate) with the interface being planar, and in which all transport is by conduction and diffusion. Linear stability of the basic state was examined to determine how the presence of solid and the ability of the material to solidify or melt under disturbance affects the critical conditions from the onset of instability. The theoretical results obtained for cases when the phase change is absent and when the Soret effects are absent (but the phase change is present) are compared with an experiment using alcohol-water mixtures.

Zimmermann, G.↗

Trade-offs arising from mixture of color cueing and monocular, binoptic, and stereoscopic cueing information for simulated rotorcraft flight

To provide stereopsis, binocular helmet-mounted display (HMD) systems must trade some of the total field of view available from their two monocular fields to obtain a partial overlap region. The visual field then provides a mixture of cues, with monocular regions on both peripheries and a binoptic (the same image in both eyes) region or, if lateral disparity is introduced to produce two images, a stereoscopic region in the overlapped center. This paper reports on in-simulator assessment of the trade-offs arising from the mixture of color cueing and monocular, binoptic, and stereoscopic cueing information in peripheral monitoring displays as utilized in HMD systems. The accompanying effect of stereoscopic cueing in the tracking information in the central region of the display is also assessed. The pilot's task for the study was to fly at a prescribed height above an undulating pathway in the sky while monitoring a dynamic bar chart displayed in the periphery of their field of view. Control of the simulated rotorcraft was limited to the longitudinal and vertical degrees of freedom to ensure the lateral separation of the viewing conditions of the concurrent tasks.

Parrish, Russell V.↗