Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiferroics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Electrical and magnetic properties of multiferroic BiFeO{sub 3}/CoFe{sub 2}O{sub 4} heterostructure

To realize a magnetoelectric heterostructure with desired ferroelectric and magnetic properties, a heterostructure consisting of BiFeO{sub 3} (BFO)/CoFe{sub 2}O{sub 4} (CFO) layers has been grown on SrRuO{sub 3} buffered Pt/TiO{sub 2}/SiO{sub 2}/Si substrate by rf sputtering. X-ray diffraction shows that the BFO and CFO phases have been successfully retained in the heterostructure. Grain growth of the CFO phase was enhanced on top of the BFO layer. The heterostructure exhibits both ferroelectric and magnetic behaviors at room temperature. Its remanent polarization (2P{sub r}) is measured to be {approx}146 {mu}C/cm{sup 2} and the coercive field (2E{sub c}) is {approx}1803 kV/cm, while the saturation magnetization (2M{sub s}) is 140 emu/cm{sup 3} and the coercive field (2H{sub c}) is {approx}2.7 kOe. The leakage current behavior of the heterostructure is consistent with space charge limited conduction mechanism. While the heterostructure is promising for multiferroic behavior, it would be necessary to control the structural defects such that the leakage is minimized.

36 MATERIALS SCIENCE↗

Room temperature multiferroic behavior of Cr-doped ZnO films

Single-phase 9 at. % Cr-doped ZnO film has been prepared on Pt(111)/Ti/SiO{sub 2}/Si(100) substrates by reactive sputtering method. The film is found to present ferroelectric and ferromagnetic behaviors simultaneously at room temperature, and it undergoes transitions to paraelectric and paramagnetic phases at {approx}368-373 and {approx}495 K, respectively. It is considered that the local electric dipoles induced by the distortions of CrO{sub 4} tetrahedra should be responsible for the ferroelectricity. On the other hand, the ferromagnetic ordering could be explained by the interaction of the localized spins with statically occupied polaron states. The multiferroic behavior adds a dimension to the multifunction of ZnO.

36 MATERIALS SCIENCE↗

THz generation via optical rectification from multiferroic BiFeO3

We detected broadband coherent terahertz (THz) emission from multiferroic BiFeO{sub 3} after illuminating a high-quality bulk single ferroelectric domain crystal with a {approx}100 fs optical pulse. The dependence of the emitted THz waveform on the energy and polarization of the optical pulse is consistent with the optical rectification mechanism of THz emission. The THz emission provides a sensitive probe of the electric polarization state of BiFeO{sub 3}, enabling applications in ferroelectric memories and ferroelectric domain imaging. We also report room-temperature THz optical constants of BiFeO{sub 3}.

36 MATERIALS SCIENCE↗

Dielectric relaxations and dielectric response in multiferroic BiFeO{sub 3} ceramics

Single-phase multiferroic BiFeO{sub 3} ceramics were fabricated using pure precipitation-prepared BiFeO{sub 3} powder. Dielectric response of BiFeO{sub 3} ceramics was investigated over a wide range of temperature and frequency. Our results reveal that the BiFeO{sub 3} ceramic sintered at 700 deg. C exhibited high dielectric permittivity, and three dielectric relaxations were observed. A Debye-type dielectric relaxation at low temperatures (-50 to 20 deg. C) is attributed to the carrier hopping process between Fe{sup 2+} and Fe{sup 3+}. The other two dielectric relaxations at the temperature ranges 30-130 deg. C and 140-200 deg. C could be due to the grain boundary effect and the defect ordering and/or the conductivity, respectively.

36 MATERIALS SCIENCE↗

Spin-charge-lattice coupling through resonant multimagnon excitations in multiferroic BiFeO{sub 3}.

Spin-charge-lattice coupling mediated by multimagnon processes is demonstrated in multiferroic BiFeO{sub 3}. Experimental evidence of two- and three-magnon excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the two-magnon excitation below the Neel temperature. These are shown to be collective interactions between on-site Fe d-d electronic resonance, phonons, and multimagnons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multiferroic behavior and impedance spectroscopy of bilayered BiFeO{sub 3}/CoFe{sub 2}O{sub 4} thin films

Lead-free bilayered multiferroic thin films consisting of BiFeO{sub 3} (BFO) and CoFe{sub 2}O{sub 4} (CFO) layers with different thicknesses were grown on SrRuO{sub 3}-coated Pt/TiO{sub 2}/SiO{sub 2}/Si substrates by radio frequency sputtering. The effects of constituent layer thicknesses on the ferroelectric and magnetic behavior have been studied. The physical behaviors are shown to strongly depend on the thicknesses of the constituent layers. BFO (220 nm)/CFO (30 nm) bilayered thin film demonstrated much improved ferroelectric and ferromagnetic behavior (2P{sub r}=144.2 muC/cm{sup 2}, 2E{sub c}=778.0 kV/cm, M{sub s}=61.2 emu/cm{sup 3}, and H{sub c}=200.8 Oe) as compared to those of the single layer BFO thin film. The dielectric behavior and conductivity of BFO (220 nm)/CFO (30 nm) bilayered thin film were investigated as a function of both temperature (in the range of 294-534 K) and frequency (in the range of 10{sup -1}-10{sup 6} Hz), where an activation energy of approx1.11 eV for dielectric relaxation was demonstrated. From the conductivity behavior, an activation energies of approx0.98 eV was derived for dc conductivity are, implying that oxygen vacancies are involved in the conduction of the BFO (220 nm)/CFO (30 nm) bilayered film.

36 MATERIALS SCIENCE↗

Effects of SrRuO{sub 3} buffer layer thickness on multiferroic (Bi{sub 0.90}La{sub 0.10})(Fe{sub 0.95}Mn{sub 0.05})O{sub 3} thin films

Multiferroic (Bi{sub 0.90}La{sub 0.10})(Fe{sub 0.95}Mn{sub 0.05})O{sub 3} (BLFMO) thin films were deposited on SrRuO{sub 3} (SRO) buffered Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates with variable buffer layer thicknesses by using off-axis radio frequency sputtering. The orientation of BLFMO thin films is dependent on the SRO buffer layer thickness, which leads to a change in ferroelectric behavior. Due to the low leakage currents arising from the orientation change in association with the variation in SRO buffer layer thickness and the La and Mn codoping, well saturated P-E hysteresis loops (2P{sub r}approx210.0 muC/cm{sup 2} and 2E{sub c}approx525.5 kV/cm) are shown for the (111)-oriented BLFMO thin film at room temperature and 1 kHz. It also demonstrates little ferroelectric fatigue on 10{sup 9} switching cycles. Moreover, the BLFMO thin film exhibits the enhanced magnetic behavior as compared to pure BFO thin films, due to the canting of antiferromagnetically ordered spins.

36 MATERIALS SCIENCE↗

Multiferroic properties in Ba{sub 0.93}Bi{sub 0.07}Ti{sub 1-x}Mn{sub x}O{sub 3} ceramics

Nominal composition of Ba{sub 0.93}Bi{sub 0.07}Ti{sub 1-x}Mn{sub x}O{sub 3} (x=0, 0.02, and 0.04) ceramics have been prepared by a modified Pechini method. X-ray diffraction analysis reveals that the samples are pure perovskite BaTiO{sub 3} (BTO) structure with no trace of impurity phase. The cell volume of the composites increases monotonously with the increase in Mn content, which indicates that Mn ions have been incorporated into the lattice of Ba{sub 0.93}Bi{sub 0.07}TiO{sub 3}. The samples are experimentally confirmed to show ferromagnetic (FM) and ferroelectric behaviors simultaneously at room temperature. The temperature dependent magnetic behaviors show complex magnetic interactions including FM, antiferromagnetic, and paramagnetic. These results suggest that the dopant Bi and Mn help BTO transit from pure ferroelectric to multiferroic materials and the magnetic behaviors can be explained by the bound magnetic polaron model with inhomogeneity of Mn dopant distribution.

36 MATERIALS SCIENCE↗

Nonstoichiometric BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} multiferroic ceramics with ultrahigh electrical resistivity

BiFeO{sub 3}, BiFe{sub 0.9}Ti{sub 0.1}O{sub 3}, and BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} ceramics of relatively high perovskite phase content were prepared for a comparison study. While both BiFe{sub 0.9}Ti{sub 0.1}O{sub 3} and BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} exhibit similarly improved weak ferromagnetism over BiFeO{sub 3}, there exists a major difference in the x-ray diffraction patterns of BiFe{sub 0.9}Ti{sub 0.1}O{sub 3} and BiFe{sub 0.9}Ti{sub 0.05}O{sub 3}, and the leakage current of BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} is decreased by five orders of magnitude from that of BiFe{sub 0.9}Ti{sub 0.1}O{sub 3}. With an ultrahigh electrical resistivity, over 1x10{sup 14} {Omega} cm, BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} ceramic displays an especially low dielectric loss, 0.015 at 100 Hz, a remanent polarization P{sub r} of 0.23 {mu}C/cm{sup 2} and a remanent magnetization M{sub r} of 0.13 emu/g at room temperature. It is proposed that the Fe-deficiency in BiFe{sub 0.9}Ti{sub 0.05}O{sub 3} decreases the amount of Fe{sup 2+} and leads to the ultrahigh electrical resistivity. Nonstoichiometric compositions should receive more attention for developing high quality BiFeO{sub 3} multiferroic materials.

36 MATERIALS SCIENCE↗

Study of epitaxial multiferroic BiFeO{sub 3} films

Multiferroic BiFeO{sub 3} epitaxial thin films are prepared using pulsed laser deposition method on single crystal SrTiO{sub 3}(001) substrates. The prepared films are characterized by [001] growth and the in-plane {phi}-scans haven shown that the films are characterized by ''cube-on-cube'' epitaxial growth. The photoelectron spectroscopy results confirm the presence of Fe{sup 3+} only. Better magnetic properties are observed in the case of less thickness BiFeO{sub 3} film as compared to higher thickness, which could be due to the in-plane strain effect.

36 MATERIALS SCIENCE↗

Magnetoelectric coupling study in multiferroic Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} ceramics through small and large electric signal standard measurements

Multifunctional multiferroic materials such as the single phase compound Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} (PFN), where ferroelectric and antiferromagnetic order coexist, are very promising and have great interest from the academic and technological points of view. In this work, coupling of the ferroelectric and magnetic moments is reported. For this study, a combination of the small signal response using the impedance spectroscopy technique and the electromechanical resonance method with the large signal response through standard ferroelectric hysteresis measurement, has been used with and without an applied magnetic field. The measurements to determine the electrical properties of the ceramic were performed as functions of the bias and poling electric fields. A simultaneous analysis of the complex dielectric constant {epsilon}-tilde, impedance Z-tilde, electric modulus M-tilde, admittance Y-tilde, and the electromechanical parameters and coupling factors is presented. The results are correlated with a previous study of structural, morphological, small signal dielectric frequency-temperature response, and the ferroelectric hysteretic, magnetic and magnetodielectric behaviors. The observed shifts of the resonance and antiresonance frequency values can be associated with change of the ferroelectric domain size favored by the readjustment of the oxygen octahedron when the magnetic field is applied. From P-E hysteresis loops obtained without and with an external applied magnetic field, a dc magnetoelectric coupling effect with maximum value of 4 kV/cm T (400 mV/cm Oe) was obtained.

36 MATERIALS SCIENCE↗

Dispersion Studies of La Substitution on Dielectric Properties of Multiferroic BiFeO{sub 3} Ceramics

Lanthanum (La)-substituted multiferroic Bi{sub 1-x}La{sub x}FeO{sub 3} ceramics with x = 0.0, 0.05, 0.10, 0.15, 0.20 and 0.25 have been prepared by solution combustion method. The effect of La substitution for the dispersion studies on dielectric properties of Bi{sub 1-x}La{sub x}FeO{sub 3} samples have been studied by performing x-ray diffraction (XRD) and dielectric measurements. The results of prepared samples are compared with those of bismuth ferrite (BiFeO{sub 3}). In the measuring frequency of 10 KHz-1 MHz, the dielectric constants and dielectric losses for samples x = 0.20, 0.25 are almost stable and exhibited lowest dielectric loss close to 0.1. The results also shows that stabilization of crystal structure and nonuniformity in spincycloid structure by La substitution enhances the dielectric properties.

36 MATERIALS SCIENCE↗

Effect of (Bi, La)(Fe, Zn)O{sub 3} thickness on the microstructure and multiferroic properties of BiFeO{sub 3} thin films

The effect of Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3} (BLFZO) thicknesses on the microstructure and multiferroic properties of BiFeO{sub 3} (BFO) thin films was investigated, and all bilayered thin films were grown on Pt-coated silicon substrates without any buffer layers by a radio frequency sputtering. A (110) orientation is dominant in all the bilayers, and two grain growth modes are identified in these bilayers by using an atomic force microscope, where different grain growth modes significantly affect their leakage behavior. The dielectric constant ({epsilon}{sub r}) of bilayers gradually increases, and magnetic properties were deteriorated with the addition of BLFZO with a higher {epsilon}{sub r} and a weaker magnetic behavior. An enhanced ferroelectric behavior of 2P{sub r} {approx} 116.2 {mu}C/cm{sup 2} and 2E{sub c} {approx} 524 kV/cm could be observed in the BFO/BLFZO bilayered thin film with 80 nm BLFZO layer owing to a higher orientation degree of (110) and an interface coupling together with a lower leakage current density. As a result, electrical properties of BFO could be tailored by modifying the thicknesses of BLFZO.

36 MATERIALS SCIENCE↗

Enhanced multiferroic properties in scandium doped Bi{sub 2}Fe{sub 4}O{sub 9}

Undoped and Sc{sup 3+} doped Bi{sub 2}Fe{sub 4}O{sub 9} nanoparticles have been synthesized using sonochemical method. The phase purity of the samples was checked using powder X-rau diffraction technique. EDS analysis was done to confirm the extent of Sc{sup 3+} doping in the samples. The size and morphology of the nanoparticles have been analyzed using transmission electron microscopy (TEM). The Bi{sub 2}Fe{sub 4}O{sub 9} nanoparticles show a weak ferromagnetic behavior at room temperature, which is quite different from the linear M-H relationship reported for bulk Bi{sub 2}Fe{sub 4}O{sub 9}. This is mainly attributed to the uncompensated moments at the disordered particle surface resulting from the reduced coordination of the surface spins, arising due to lattice strain or oxygen deficiency. Addition of Sc{sup 3+} dopant in varying concentrations in these Bi{sub 2}Fe{sub 4}O{sub 9} nanoparticles, improves their magnetic as well as ferroelectric properties. The leakage current is considerably reduced and electric polarization increases significantly in case of Bi{sub 2}Fe{sub 4(1-x)}Sc{sub x}O{sub 9}(x = 0.1) nanoparticles. Hence it can be inferred that Sc{sup 3+} doped Bi{sub 2}Fe{sub 4}O{sub 9} nanoparticles shows promise as good multiferroic materials.

36 MATERIALS SCIENCE↗

Room temperature multiferroic properties of Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}–Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4} composites

We report the crystal structure, magnetic, ferroelectric, dielectric, and magneto-dielectric properties of [Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}]{sub (1−x)}[Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4}]{sub x}: (x = 0.1, 0.2, 0.3, and 0.4) composites. Rietveld refinement results of X-ray diffraction patterns confirm the formation of these composites for all x values. All the composites show well-saturated ferroelectric and ferromagnetic hysteresis (multiferroic-composite behavior) at room temperature. With increase in Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4} (CZFO) content an increase in saturation magnetization, and decrease in saturation polarization, remanent polarization, and dielectric constant are observed. The ferroelectric phase transition temperature increases with increase in CZFO content. All of the compositions undergo second-order ferroelectric phase transitions, which can be explained by Landau-Devonshire theory. The recoverable energy density (∼0.20 to 0.04 J/cm{sup 3}) and charge-curve energy density (∼0.84 to 0.11 J/cm{sup 3}) decrease with increase in the CZFO content. The room-temperature magneto-dielectric measurements provide direct evidence of magneto-electric coupling via strain at room temperature.

36 MATERIALS SCIENCE↗

The Cr-substitution concentration dependence of the structural, electric and magnetic behaviors for Aurivillius Bi{sub 5}Ti{sub 3}FeO{sub 15} multiferroic ceramics

Aurivillius Bi{sub 5}Ti{sub 3}FeO{sub 15} (BTFO) multiferroic ceramics with different Cr-doped concentrations have been synthesized by the conventional solid state reaction method. The influences of Cr-doping concentrations on the structural, magnetic, dielectric, and ferroelectric properties of BTFO ceramics are investigated in detail. All these sintered Cr-substituted BTFO ceramics are determined to be layered perovskite Aurivillius structure by X-ray diffraction, as well as the lattice parameters a, b, and c are in good accordance with Vegard's law along with the Cr-doping concentration. The lattice distortion a/b for Aurivillius family decreases with increasing Cr-doping concentration. Moreover, Cr-doping can promote greatly the grain growth of BTFO samples confirmed from field emission scanning electron microscopy characterization. However, no obvious signs of the improvement in ferroelectric properties are found in Cr-doped BTFO ceramics, and abnormal ferroelectric polarization versus electric field (P-E) loops are observed as Cr-doping content is beyond 0.1. Similar ε (tanδ) versus frequency plots to those of the BTFO sample are exhibited when Cr-doping concentration is less than 0.1. Nevertheless, obvious dielectric dispersion phenomena are shown as the Cr-doping concentration is beyond 0.1, and this dispersion behavior becomes strong with further increasing Cr-doping concentration, which are clearly indicated by the appearance of dielectric loss relaxation peaks in the measurement frequency from 10{sup 2} Hz to 10{sup 6} Hz. In addition, the corresponding frequency to relaxation peak shifts towards high frequencies with the Cr-doping concentration. Finally, the same magnetic orderings for all these Cr-doped BTFO ceramics as those of the BTFO one, i.e., superparamagnetic state dominated with antiferromagnetic interaction, are unambiguously found, signifying that the predicted Fe{sup 3+}-O-Cr{sup 3+} 180° ferromagnetic superexchange interaction based on the Goodenough-Kanamori (G-K) rule might not be achieved in BTFO ceramics through Cr substitution by the conventional solid state reaction.

36 MATERIALS SCIENCE↗

Misfit strain driven cation inter-diffusion across an epitaxial multiferroic thin film interface

Cation intermixing at functional oxide interfaces remains a highly controversial area directly relevant to interface-driven nanoelectronic device properties. Here, we systematically explore the cation intermixing in epitaxial (001) oriented multiferroic bismuth ferrite (BFO) grown on a (001) lanthanum aluminate (LAO) substrate. Aberration corrected dedicated scanning transmission electron microscopy and electron energy loss spectroscopy reveal that the interface is not chemically sharp, but with an intermixing of ∼2 nm. The driving force for this process is identified as misfit-driven elastic strain. Landau-Ginzburg-Devonshire-based phenomenological theory was combined with the Sheldon and Shenoy formula in order to understand the influence of boundary conditions and depolarizing fields arising from misfit strain between the LAO substrate and BFO film. The theory predicts the presence of a strong potential gradient at the interface, which decays on moving into the bulk of the film. This potential gradient is significant enough to drive the cation migration across the interface, thereby mitigating the misfit strain. Our results offer new insights on how chemical roughening at oxide interfaces can be effective in stabilizing the structural integrity of the interface without the need for misfit dislocations. These findings offer a general formalism for understanding cation intermixing at highly strained oxide interfaces that are used in nanoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiferroicity and magnetoelectric coupling enhanced large magnetocaloric effect in DyFe{sub 0.5}Cr{sub 0.5}O{sub 3}

DyFe{sub 0.5}Cr{sub 0.5}O{sub 3} has been synthesized using a sol-gel method. It exhibits ferroelectricity at the antiferromagnetic ordering temperature T{sub N1}∼261 K. Large magnetocaloric effect (MCE) (11.3 J/kg K at 4.5 T) enhanced by magnetoelectric coupling due to magnetic field and temperature induced magnetic transition was observed. Temperature-dependent Raman study shows an anomalous behavior near T{sub N1} in the phonon modes related to the vibration of Dy atoms and stretching of CrO{sub 6}/FeO{sub 6} octahedra, suggesting the ferroelectricity in DyFe{sub 0.5}Cr{sub 0.5}O{sub 3} is associated with the spin-phonon coupling with respect to both Dy and Cr/Fe ions. These results suggest routes to obtain high-temperature multiferroicity and large MCE for practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗