Search NASA⌕ Search

SEARCH · Search NASA

Results for “multimode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Spectral dispersion of the linewidth enhancement factor and four wave mixing conversion efficiency of an InAs/GaAs multimode quantum dot laser

The spectral dependence of the linewidth enhancement factor (αH-factor) of a multimode InAs/GaAs quantum dot laser is analyzed. Amplified spontaneous and high-frequency modulation methods are used to experimentally retrieve the αH-factor of each longitudinal mode below and above the threshold. A dispersion of the αH-factor is unlocked across the entire optical spectrum, which is further illustrated in the context of four wave mixing experiments. The results show that the induced conversion efficiency is increased at lasing wavelengths where the linewidth enhancement is lower. These results highlight the importance of carefully monitoring the linewidth enhancement factor in quantum dot lasers especially for frequency combs and mode-locking applications in future optical communication systems.

Ding, Shihao (ORCID:0000000346416944)↗

Optically pumped deep-UV multimode lasing in AlGaN double heterostructure grown by molecular beam homoepitaxy

Multimode lasing at sub-300 nm wavelengths is demonstrated by optical pumping in AlGaN heterostructures grown on single-crystal AlN substrates by plasma-assisted molecular beam epitaxy. Edge-emitting ridge-based Fabry–Pérot cavities are fabricated with the epitaxial AlN/AlGaN double heterostructure by a combined inductively coupled plasma reactive ion etch and tetramethylammonium hydroxide etch. The emitters exhibit peak gain at 284 nm and modal linewidths on the order of 0.1 nm at room temperature. The applied growth technique and its chemical and heterostructural design characteristics offer certain unique capabilities toward further development of electrically injected AlGaN laser diodes.

36 MATERIALS SCIENCE↗

A multimodal flow reactor for photocatalysis under atmospheric conditions

Photocatalysis is a promising concept for the direct conversion of solar energy into fuels and chemicals. The design, experimental protocol, and performance of a multimodal and versatile flow reactor for the characterization of powdered and immobilized photocatalysts are presented in this report. Ultimately, this instrument enables rigorous evaluation of photocatalysis performance metrics. The apparatus quantifies transient gas-phase reaction products via online real-time gas analyzer mass spectrometry (RTGA-MS). For H 2 , the most challenging gas, the photocatalytic system’s RTGA-MS gas detection sensitivity spans over three orders of magnitude and can detect down to tens of parts per million under atmospheric conditions. Using Pt nanoparticles supported on anatase TiO 2 photocatalyst via wet impregnation, the instrument’s capability for the characterization of photocatalytic H 2 evolution is demonstrated, resulting in an apparent quantum yield (AQY) of 48.1% ± 0.9% at 320 nm, 45.7% ± 0.3% at 340 nm and 31% ± 1% at 360 nm. The photodeposition of Pt on anatase TiO 2 was employed to demonstrate the instrument’s capability to track the transient behavior of photocatalysts, resulting in an improved 55% ± 2% AQY for H 2 evolution at 340 nm from aqueous methanol. This photocatalytic instrument enables systematic study of a wide variety of photocatalytic reactions such as water splitting and CO 2 reduction to valuable C2+ fuels and chemicals.

14 SOLAR ENERGY↗

Multimodal azimuthal oscillations in electron beam generated E×B plasma

Electron beam (e-beam) generated plasmas with applied crossed electric and magnetic (E×B) fields are promising for low-damage material processing. However, these plasmas can be subject to the formation of azimuthally propagating structures that enhance the radial transport of energetic charged species, which can harm the gentle processing capability of the plasma. In this work, we investigate the azimuthal structure formation in an e-beam generated E×B plasma using experimental diagnostics and 2D3V particle-in-cell simulations. Our findings demonstrate the formation of multiple simultaneously occurring azimuthally propagating modes that exhibit nontrivial radial dependence. It is suggested that the multimodal azimuthal spectrum is caused in part by the radial outflow of ions in the plasma.

electron beams↗

Gerchberg-Saxton algorithm: experimental realisation and modification for the problem of formation of multimode laser beams

An original method is proposed to calculate the formation of specified far-field intensity distributions by a bimorph mirror in the case of initial transverse-multimode beams. The method is based on the Gerchberg-Saxton algorithm with replacement of the phase function in the plane of the control element by a function that takes into account both the intensity and phase distributions of each mode. The numerical results on the formation of a beam with the third-order super-Gaussian intensity distribution from beams composed of two or four lowest transverse modes are discussed. The experimental results on using the conventional Gerchberg-Saxton algorithm to form a desired intensity distribution from single-mode laser beams using a liquid-crystal modulator are presented. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of multimode lasing in an electron-beam-controlled CO{sub 2} laser with an unstable cavity under thermal self-action of radiation

A numerical technique for calculating the time-dependent multimode lasing in an electron-beam-controlled CO{sub 2} laser at significant optical inhomogeneities caused by radiation self-action is presented. The reported calculations for subatmospheric pressure yield a sequence of involvement of transverse modes in lasing, the evolution of their characteristics (which is self-consistent with the evolution of gain and optical inhomogeneities of the active medium), and the exclusion of output modes from lasing. This calculation technique can be used when the radiation round-trip time around the cavity is shorter than the characteristic time of change in the active-medium characteristics. (lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of bifurcation processes in a multimode waveguide with statistical irregularities

We consider the theoretical principles of the original investigation of irregular optical waveguides in the form of a dynamic dissipative system. The scattering of guided modes in an irregular optical waveguide is considered as a process of gradual transition of a dynamic dissipative system from an 'ordered' state into 'chaos.' The growth of scattering losses in an irregular optical waveguide is represented as an increase in chaos in the system under analysis. The phase retardation factor of a multimode waveguide is used as a control parameter of the process. The use of the methods of catastrophe theory can explain the behaviour of the dissipative system under study in the process of changing the control parameter. It is found that an increase in chaos in the system (an increase in losses due to scattering in an irregular waveguide under excitation of modes of increasingly higher order) can be explained by a sequence of direct bifurcations, i.e., the existence of stable cycles in the system. As a result, the irregular optical waveguide can be regarded as a system in which the energy of a regular process (the process of propagation of a guided mode) passes into the energy of a 'disordered' process, i.e., the energy of radiation modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral characteristics of multimode semiconductor lasers with a high-order surface diffraction grating

We have studied the spectral characteristics of multimode semiconductor lasers with high-order surface diffraction gratings based on asymmetric separate-confinement heterostructures grown by metalorganic vapour phase epitaxy (λ = 1070 nm). Experimental data demonstrate that, in the temperature range ±50 °C, the laser emission spectrum is ∼5 Å in width and contains a fine structure of longitudinal and transverse modes. A high-order (m = 15) surface diffraction grating is shown to ensure a temperature stability of the lasing spectrum dλ/dT = 0.9 Å K{sup -1} in this temperature range. From analysis of the fine structure of the lasing spectrum, we have evaluated the mode spacing and, thus, experimentally determined the effective length of the Bragg diffraction grating, which was ∼400 μm in our samples. (lasers)

36 MATERIALS SCIENCE↗

Mode selection in a directly diode-pumped Raman fibre laser using FBGs in a graded-index multimode fibre

We examine the selection of the fundamental transverse mode in a directly multimode-diode-pumped Raman laser with a cavity formed by fibre Bragg gratings (FBGs) in a graded-index fibre. The application of FBGs recorded by femtosecond radiation in the central region of the fibre core provides an unprecedentedly high (for lasers of this type) beam quality (M{sup 2}<1.2) at a lasing power above 5 W. (paper)

42 ENGINEERING↗

Nonlinear effects in optical signal transmission using a multimode fibre with weak coupling

We present the results of numerical simulation of nonlinear propagation of an optical signal in multimode gradient- and step-index fibres with weak coupling. It is found that when signals propagate in different modes, the system quality factor ( Q -factor) for a gradient-index fibre increases with the number of the modes involved. The quality degradation of the transmitted data with increasing the number of the involved modes is demonstrated for the case when the signals in different modes travel at the same velocity. It is shown that the use of a step-index fibre may significantly deteriorate the signal quality due to the presence of a mode with a small dispersion parameter. (fibre-optic communication)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Femtosecond writing of refractive index structures in multimode and multicore optical fibres

The possibility of writing fibre Bragg gratings (FBGs) in optical fibres with a complex spatial structure using femtosecond IR laser pulses is considered. In particular, selective writing of uniform FBGs in individual cores of a seven-core fibre and writing of serial and parallel FBG arrays in the core of a multimode fibre with a gradient refractive index profile are demonstrated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental studies of 1.5 – 1.6 μm high-power asymmetric-waveguide multimode lasers

The current – voltage, light – current, and spectral characteristics of high-power multimode semiconductor lasers emitting at wavelengths of 1.5 – 1.6 μm are studied experimentally. It is shown that the cw output power of a C-mount laser with a cavity length of 2.6 mm and a mesa-stripe contact width of 100 μm exceeds 4 W at a pump power of 15 A. The output power in a pulsed regime amounts to 20 W at a pulse duration of 100 ns, a pulse repetition rate of 5 kHz, and a pump current no higher than 80 A. The dependences of the laser wavelength and spectral width on the pump current are presented. The current – voltage and light – current characteristics, as well as the characteristic temperatures of the lasers, are calculated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical simulation of the beam self-cleaning process in a multimode graded-index fibre during propagation of a pump wave and a Stokes component

A model of coupled modes is proposed, which makes it possible to describe the propagation of a pump wave and a Stokes component in a multimode graded-index fibre. A decrease in the depression in the centre of the profile of the pump wave intensity distribution as a result of the influence of Kerr effects and random linear coupling of modes is demonstrated. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Integrated nanotechnology platform for tumor-targeted multimodal imaging and therapeutic cargo release

A major challenge of targeted molecular imaging and drug delivery in cancer is establishing a functional combination of ligand-directed cargo with a triggered release system. Here we develop a hydrogel-based nanotechnology platform that integrates tumor targeting, photon-to-heat conversion, and triggered drug delivery within a single nanostructure to enable multimodal imaging and controlled release of therapeutic cargo. In proof-of-concept experiments, we show a broad range of ligand peptide-based applications with phage particles, heat-sensitive liposomes, or mesoporous silica nanoparticles that self-assemble into a hydrogel for tumor-targeted drug delivery. Because nanoparticles pack densely within the nanocarrier, their surface plasmon resonance shifts to near-infrared, thereby enabling a laser-mediated photothermal mechanism of cargo release. We demonstrate both noninvasive imaging and targeted drug delivery in preclinical mouse models of breast and prostate cancer. Finally, we applied mathematical modeling to predict and confirm tumor targeting and drug delivery. We conclude that these results are meaningful steps toward the design and initial translation of an enabling nanotechnology platform with potential for broad clinical applications.

60 APPLIED LIFE SCIENCES↗

Self-similarity of a Rayleigh–Taylor mixing layer at low Atwood number with a multimode initial perturbation

High-fidelity large eddy simulation (LES) of a low-Atwood number (A = 0.05) Rayleigh-Taylor mixing layer is performed using the tenth-order compact difference code Miranda. An initial multimode perturbation spectrum is specified in Fourier space as a function of mesh resolution such that a database of results is obtained in which each successive level of increased grid resolution corresponds approximately to one additional doubling of the mixing layer width, or generation. The database is then analyzed to determine approximate requirements for self-similarity, and a new metric is proposed to quantify how far a given simulation is from the limit of self-similarity. It is determined that mixing layer growth reaches a high degree of self-similarity after approximately 4.5 generations. Statistical convergence errors and boundary effects at late time, however, make it impossible to draw similar conclusions regarding the self-similar growth of more sensitive turbulence parameters. Finally, self-similar turbulence profiles from the LES database are compared with one-dimensional simulations using the k-L-a and BHR-2 Reynolds-averaged Navier-Stokes (RANS) models. The k-L-a model, which is calibrated to reproduce a quadratic turbulence kinetic energy profile for a self-similar mixing layer, is found to be in better agreement with the LES than BHR-2 results.

42 ENGINEERING↗

Deep Multimodal Networks for M-type Star Classification with Paired Spectrum and Photometric Image

Abstract Traditional stellar classification methods include spectral and photometric classification separately. Although satisfactory results can be achieved, the accuracy could be improved. In this paper, we pioneer a novel approach to deeply fuse the spectra and photometric images of the sources in an advanced multimodal network to enhance the model’s discriminatory ability. We use Transformer as the fusion module and apply a spectrum–image contrastive loss function to enhance the consistency of the spectrum and photometric image of the same source in two different feature spaces. We perform M-type stellar subtype classification on two data sets with high and low signal-to-noise ratio (S/N) spectra and corresponding photometric images, and the F1-score achieves 95.65% and 90.84%, respectively. In our experiments, we prove that our model effectively utilizes the information from photometric images and is more accurate than advanced spectrum and photometric image classifiers. Our contributions can be summarized as follows: (1) We propose an innovative idea for stellar classification that allows the model to simultaneously consider information from spectra and photometric images. (2) We discover the challenge of fusing low-S/N spectra and photometric images in the Transformer and provide a solution. (3) The effectiveness of Transformer for spectral classification is discussed for the first time and will inspire more Transformer-based spectral classification models.

Astronomy & Astrophysics↗

Maven: a multimodal foundation model for supernova science

Abstract A common setting in astronomy is the availability of a small number of high-quality observations, and larger amounts of either lower-quality observations or synthetic data from simplified models. Time-domain astrophysics is a canonical example of this imbalance, with the number of supernovae observed photometrically outpacing the number observed spectroscopically by multiple orders of magnitude. At the same time, no data-driven models exist to understand these photometric and spectroscopic observables in a common context. Contrastive learning objectives, which have grown in popularity for aligning distinct data modalities in a shared embedding space, provide a potential solution to extract information from these modalities. We present Maven, the first foundation model for supernova science. To construct Maven, we first pre-train our model to align photometry and spectroscopy from 0.5 M synthetic supernovae using a contrastive objective. We then fine-tune the model on 4702 observed supernovae from the Zwicky transient facility. Maven reaches state-of-the-art performance on both classification and redshift estimation, despite the embeddings not being explicitly optimized for these tasks. Through ablation studies, we show that pre-training with synthetic data improves overall performance. In the upcoming era of the Vera C. Rubin observatory, Maven will serve as a valuable tool for leveraging large, unlabeled and multimodal time-domain datasets.

Zhang, Gemma (ORCID:0000000280198082)↗

miss-SNF: a multimodal patient similarity network integration approach to handle completely missing data sources

Abstract Motivation Precision medicine leverages patient-specific multimodal data to improve prevention, diagnosis, prognosis, and treatment of diseases. Advancing precision medicine requires the non-trivial integration of complex, heterogeneous, and potentially high-dimensional data sources, such as multi-omics and clinical data. In the literature, several approaches have been proposed to manage missing data, but are usually limited to the recovery of subsets of features for a subset of patients. A largely overlooked problem is the integration of multiple sources of data when one or more of them are completely missing for a subset of patients, a relatively common condition in clinical practice. Results We propose miss-Similarity Network Fusion (miss-SNF), a novel general-purpose data integration approach designed to manage completely missing data in the context of patient similarity networks. miss-SNF integrates incomplete unimodal patient similarity networks by leveraging a non-linear message-passing strategy borrowed from the SNF algorithm. miss-SNF is able to recover missing patient similarities and is “task agnostic”, in the sense that can integrate partial data for both unsupervised and supervised prediction tasks. Experimental analyses on nine cancer datasets from The Cancer Genome Atlas (TCGA) demonstrate that miss-SNF achieves state-of-the-art results in recovering similarities and in identifying patients subgroups enriched in clinically relevant variables and having differential survival. Moreover, amputation experiments show that miss-SNF supervised prediction of cancer clinical outcomes and Alzheimer’s disease diagnosis with completely missing data achieves results comparable to those obtained when all the data are available. Availability and implementation miss-SNF code, implemented in R, is available at https://github.com/AnacletoLAB/missSNF.

Biochemistry & Molecular Biology↗