Search NASA⌕ Search

SEARCH · Search NASA

Results for “network data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Performance Validation of Advanced PHEV Vehicle

Summary of Major Accomplishments: Ford developed a PHEV Escape as part of a DOE contract to develop a production-ready PHEV prototype. Although conventional certification tests were conducted by Ford during their development, Argonne was brought in at the half-way point and at end of the development project to run their research-oriented benchmark testing on one of their prototype vehicles in different states of controls development. Here are the accomplishments: Prototype vehicle was instrumented by installing voltage and current probes and a resolver was installed for engien speed and position; Other signals were collected such as several temperatures and sett up CAN network data collection. ANL-1060 (10/07/2016) Summary of Major Accomplishments: 51 individual tests were conducted on the 4WD chassis dynamometer in December 2008, in both CD and CS modes over UDDS, US06, HWY, SC03 cycles, and research cycles including preformance and steady-state - 66 individual tests were conducted run on the 4WD chassis dynamometer in Aug 2009, in both CD and CS modes over UDDS, US06, HWY, SC03 cycles, and research cycles including prefoemance and steady-state - Data was analyzed and summarized for DOE in several in-person briefings. One briefing was held in early 2009 and another in the fall of 2009.

33 ADVANCED PROPULSION SYSTEMS↗

Performance Validation of Advanced PHEV Vehicle

Summary of Major Accomplishments: Chrysler developed a PHEV minivan as part of a DOE contract to develop a production-ready PHEV prototype. Although conventional certification tests were conducted by Chrysler during their development, Argonne was brought in at the end of the development project to run their research-oriented benchmark testing on one of the prototype vehicles. Here are the accomplishments: Prototype vehicle was instrumented by removing some panels and installing voltage and current probes; Other signals such as temperature and setting up CAN network data collection; 42 drive cycle tests were run on the 4WD chassis dynamometer, in both CD and CS modes over UDDS, US06, HWY, SC03 cycles, and research cycles including steady-state

33 ADVANCED PROPULSION SYSTEMS↗

DOE BSSD Performance Management Metrics Report Q1

Microbes play key roles in our biosphere, from driving global nutrient cycling to impacting plant, animal and human health and disease. Complex data from microbial genomes, proteins, and metabolites provide a window into these tiny engines that drive life on our planet. Yet these data are dispersed among researchers’ laboratories and various repositories, making it difficult to access. This calls for new ways of managing data, improving data interoperability, advancing community standards, and creating an infrastructure where data are shared efficiently. We have built the National Microbiome Data Collaborative (NMDC) to advance how scientists create, use, and reuse data to redefine the way we understand and harness the power of microbes. The vision of the National Microbiome Data Collaborative (NMDC) is to drive a microbiome data sharing network connecting data, people, and ideas to advance microbiome innovation and discovery. The NMDC was launched in 2019 and brought together DOE National Laboratories to collaborate across resources, capabilities, and expertise. The NMDC team was strategically assembled to include software developers, microbial researchers, metadata experts, and multi-omics specialists. The diversity of the NMDC team reflects the inherently interdisciplinary nature of microbiome science, and we leverage the strengths of the DOE National Laboratory system. Towards BER’s goal of advancing an iterative systems biology approach to the understanding of microbial genomes, the NMDC serves as a foundation for infrastructure, data standards, and community building. Together with the flagship DOE User Facilities, the Joint Genome Institute (JGI) and the Environmental Molecular Sciences Laboratory (EMSL), we are developing core capabilities in metadata standards for environmental descriptors and sample handling and processing; standardized bioinformatic workflows; an interface for data search and access; and robust community engagement activities. The NMDC production platform supports long-term data infrastructure and community building for BER’s bioenergy and environmental research goals. Our approach leverages lessons learned and an ambitious framework for collaborative, interdisciplinary data infrastructure to support microbiome research. The NMDC supports data, information, and knowledge access through three defined software tools – the Submission Portal, NMDC EDGE, and the Data Portal – driven by community needs. Herein, we describe the value proposition for the microbiome research community, our overarching strategy, and challenges and opportunities for developing the NMDC as both an infrastructure and community engagement program.

59 BASIC BIOLOGICAL SCIENCES↗

Quantifying the Operational Impacts of Cyber Events on Enterprise Network Environments

The "Quantifying the Operational Impacts of Cyber Events on Enterprise Network Environments" Feasibility Study addressed the question: Can an existing (novel) class of network characterization and change detection algorithms previously developed at LLNL for internal enterprise datasets, be effectively applied to assess and measure the analytic value of features derived from datasets composed of passively collected RF and wireless network data?

97 MATHEMATICS AND COMPUTING↗

Atmospheric CO Concentrations from the CSIRO GASLAB Flask Sampling Network

Individual measurements have been obtained from flask air samples returned to the CSIRO GASLAB. Typical sample storage times range from days to weeks for some sites (e.g. Cape Grim) to as much as 1 year for Macquarie Island and the Antarctic sites. Experiments carried out to test for changes in sample CO mixing ratio during storage have shown significant drifts in some flask types over test periods of several months to years (Cooper et al., 1999). Corrections derived from the test results are applied to network data according to flask type. (Data from the S160 flasks have been rejected due to large and variable drift.)An annual cycle of CO is evident, largely due to an increase in its destruction by the OH radical during the summer months. Additional influences include spatial and seasonal differences in source strength associated with varying trajectories of arriving air at different times of the year. Annual average CO mixing ratios at Alert in 2001 had decreased by about 13 percent of their 1993 value. A string of abnormally high monthly mixing ratios during the winter of 1998-1999, coupled with higher than normal mixing ratios during the previous summer, led to an anomalously high annual average for 1998. Elevated CO mixing ratios were observed on a global scale during 1998 (see Langenfelds et al., 2002).

54 ENVIRONMENTAL SCIENCES↗

Multi-model Mean Nitrogen and Sulfur Deposition from the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP): Evaluation of Historical and Projected Future Changes

We present multi-model global datasets of nitrogen and sulfate deposition covering time periods from 1850 to 2100, calculated within the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP). The computed deposition fluxes are compared to surface wet deposition and ice-core measurements. We use a new dataset of wet deposition for 2000-2002 based on critical assessment of the quality of existing regional network data. We show that for present-day (year 2000 ACCMIP time-slice), the ACCMIP results perform similarly to previously published multi-model assessments. The analysis of changes between 1980 and 2000 indicates significant differences between model and measurements over the United States, but less so over Europe. This difference points towards misrepresentation of 1980 NH3 emissions over North America. Based on ice-core records, the 1850 deposition fluxes agree well with Greenland ice cores but the change between 1850 and 2000 seems to be overestimated in the Northern Hemisphere for both nitrogen and sulfur species. Using the Representative Concentration Pathways to define the projected climate and atmospheric chemistry related emissions and concentrations, we find large regional nitrogen deposition increases in 2100 in Latin America, Africa and parts of Asia under some of the scenarios considered. Increases in South Asia are especially large, and are seen in all scenarios, with 2100 values more than double 2000 in some scenarios and reaching >1300 mgN/m2/yr averaged over regional to continental scale regions in RCP 2.6 and 8.5, ~30-50% larger than the values in any region currently (2000). Despite known issues, the new ACCMIP deposition dataset provides novel, consistent and evaluated global gridded deposition fields for use in a wide range of climate and ecological studies.

ACCMIP↗

A data model of the Climate and Forecast metadata conventions (CF-1.6) with a software implementation (cf-python v2.1)

Abstract. The CF (Climate and Forecast) metadata conventions are designed to promote the creation, processing, and sharing of climate and forecasting data using Network Common Data Form (netCDF) files and libraries. The CF conventions provide a description of the physical meaning of data and of their spatial and temporal properties, but they depend on the netCDF file encoding which can currently only be fully understood and interpreted by someone familiar with the rules and relationships specified in the conventions documentation. To aid in development of CF-compliant software and to capture with a minimal set of elements all of the information contained in the CF conventions, we propose a formal data model for CF which is independent of netCDF and describes all possible CF-compliant data. Because such data will often be analysed and visualised using software based on other data models, we compare our CF data model with the ISO 19123 coverage model, the Open Geospatial Consortium CF netCDF standard, and the Unidata Common Data Model. To demonstrate that this CF data model can in fact be implemented, we present cf-python, a Python software library that conforms to the model and can manipulate any CF-compliant dataset.

54 ENVIRONMENTAL SCIENCES↗

Fuzzy Logic Based Anomaly Detection for Embedded Network Security Cyber Sensor

Resiliency and security in critical infrastructure control systems in the modern world of cyber terrorism constitute a relevant concern. Developing a network security system specifically tailored to the requirements of such critical assets is of a primary importance. This paper proposes a novel learning algorithm for anomaly based network security cyber sensor together with its hardware implementation. The presented learning algorithm constructs a fuzzy logic rule based model of normal network behavior. Individual fuzzy rules are extracted directly from the stream of incoming packets using an online clustering algorithm. This learning algorithm was specifically developed to comply with the constrained computational requirements of low-cost embedded network security cyber sensors. The performance of the system was evaluated on a set of network data recorded from an experimental test-bed mimicking the environment of a critical infrastructure control system.

97 MATHEMATICS AND COMPUTING↗

Towards Resilient Critical Infrastructures: Application of Type-2 Fuzzy Logic in Embedded Network Security Cyber Sensor

Resiliency and cyber security of modern critical infrastructures is becoming increasingly important with the growing number of threats in the cyber-environment. This paper proposes an extension to a previously developed fuzzy logic based anomaly detection network security cyber sensor via incorporating Type-2 Fuzzy Logic (T2 FL). In general, fuzzy logic provides a framework for system modeling in linguistic form capable of coping with imprecise and vague meanings of words. T2 FL is an extension of Type-1 FL which proved to be successful in modeling and minimizing the effects of various kinds of dynamic uncertainties. In this paper, T2 FL provides a basis for robust anomaly detection and cyber security state awareness. In addition, the proposed algorithm was specifically developed to comply with the constrained computational requirements of low-cost embedded network security cyber sensors. The performance of the system was evaluated on a set of network data recorded from an experimental cyber-security test-bed.

97 MATHEMATICS AND COMPUTING↗

Sensor placement for optimal event characterization performance.

Contaminant sensor placement is often cast as an optimization problem to minimize objectives such as the probability of failed detection or public health impact. In the case of an actual incident, the sensor network data will also be utilized for event characterization to estimate source location, size and hazard areas. We present a sensor placement methodology to optimize for event characterization performance, and also compare the results to traditional placement objectives.

99 GENERAL AND MISCELLANEOUS↗

TOXNET and Beyond-Using the National Library of Medicine's Environmental Health and Toxicology Portal

The purpose of this training is to familiarize participants with reliable online environmental health and toxicology information, from the National Library of Medicine and other reliable sources. Skills and knowledge acquired in this training class will enable participants to access, utilize, and refer others to environmental health and toxicology information. After completing this course, participants will be able to: (1) Identify quality, accurate, and authoritative online resources pertaining to environmental health, toxicology, and related medical information; (2) Demonstrate the ability to perform strategic search techniques to find relevant online information; and (3) Apply the skills and knowledge obtained in this class to their organization's health information needs. NLMs TOXNET (Toxicology Data Network) is a free, Web-based system of databases on toxicology, environmental health, hazardous chemicals, toxic releases, chemical nomenclatures, and specialty areas such as occupational health and consumer products. Types of information in the TOXNET databases include: (1) Specific chemicals, mixtures, and products; (2) Unknown chemicals; and (3) Special toxic effects of chemicals in humans and/or animals.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The Common Communication Interface (CCI)

There are many APIs for connecting and exchanging data between network peers. Each interface varies wildly based on metrics including performance, portability, and complexity. Specifically, many interfaces make design or implementation choices emphasizing some of the more desirable metrics (e.g., performance) while sacrificing others (e.g., portability). As a direct result, software developers building large, network-based applications are forced to choose a specific network API based on a complex, multi-dimensional set of criteria. Such trade-offs inevitably result in an interface that fails to deliver some desirable features. In this paper, we introduce a novel interface that both supports many features that have become standard (or otherwise generally expected) in other communication interfaces, and strives to export a small, yet powerful, interface. This new interface draws upon years of experience from network-oriented software development best practices to systems-level implementations. The goal is to create a relatively simple, high-level communication interface with low barriers to adoption while still providing important features such as scalability, resiliency, and performance. The result is the Common Communications Interface (CCI): an intuitive API that is portable, efficient, scalable, and robust to meet the needs of network-intensive applications common in HPC and cloud computing.

99 GENERAL AND MISCELLANEOUS↗

Detection of anomalous events

A system is described for receiving a stream of events and scoring the events based on anomalousness and maliciousness (or other classification). The system can include a plurality of anomaly detectors that together implement an algorithm to identify low-probability events and detect atypical traffic patterns. The anomaly detector provides for comparability of disparate sources of data (e.g., network flow data and firewall logs.) Additionally, the anomaly detector allows for regulatability, meaning that the algorithm can be user configurable to adjust a number of false alerts. The anomaly detector can be used for a variety of probability density functions, including normal Gaussian distributions, irregular distributions, as well as functions associated with continuous or discrete variables.

97 MATHEMATICS AND COMPUTING↗

Short-Term Solar Forecasting Performance of Popular Machine Learning Algorithms: Preprint

A framework for assessing the performance of short-term solar forecasting is presented in conjunction with a range of numerical results using global horizontal irradiation (GHI) from the open-source Surface Radiation Budget (SURFRAD) data network. A suite of popular machine learning algorithms is compared according to a set of statistically distinct metrics and benchmarked against the persistence-of-cloudiness forecast and a cloud motion forecast. Results show significant improvement compared to the benchmarks with trade-offs among the machine learning algorithms depending on the desired error metric. Training inputs include time series observations of GHI for a history of years, historical weather and atmospheric measurements, and corresponding date and time stamps such that training sensitivities might be inferred. Prediction outputs are GHI forecasts for 1, 2, 3, and 4 hours ahead of the issue time, and they are made for every month of the year for 7 locations. Photovoltaic power and energy outputs can then be made using the solar forecasts to better understand power system impacts.

14 SOLAR ENERGY↗

Cyber-Physical Events Emulation Based Transmission and Distribution Co-Simulation for Situation Awareness and Grid Anomaly (SAGA) Detection: Preprint

Energy management of transmission and distribution networks is becoming more challenged with the accelerated increasing of distributed energy resources (DERs) such as distributed photovoltaic (PV) generation and distributed energy storage. To better analyze the impacts of DERs on both transmission and distribution systems, a comprehensive transmission and distribution co-simulation platform should be developed. Furthermore, with DERs more actively participated in system operation such as providing real time grid services, their cyber vulnerability should be better understood to maintain system reliability. This paper discussed a cyber-physical events emulation based transmission & distribution co-simulation platform to perform different cyber events emulation and analyze the impacts of cyber physical events happened in distribution system on the T&D system operation. The case studies with both a transmission network and a synthetic distribution network data validate that the proposed T&D co-simulation platform can perform comprehensive cyber physical events emulation. Therefore, with extensive simulation using the proposed model, the system operator can accumulate adequate training data for the system situation awareness and grid anomaly detection purpose.

31 CESER - Office of Cybersecurity, Energy Securit↗

Human factor engineering based design and modernization of control rooms with new I and C systems

Instrumentation and Control (I and C) systems of the latest nuclear power plants are based on the use of digital technology, distributed control systems and the integration of information in data networks (Distributed Control and Instrumentation Systems). This has a repercussion on Control Rooms (CRs), where the operations and monitoring interfaces correspond to these systems. These technologies are also used in modernizing I and C systems in currently operative nuclear power plants. The new interfaces provide additional capabilities for operation and supervision, as well as a high degree of flexibility, versatility and reliability. An example of this is the implementation of solutions such as compact stations, high level supervision screens, overview displays, computerized procedures, new operational support systems or intelligent alarms processing systems in the modernized Man-Machine Interface (MMI). These changes in the MMI are accompanied by newly added Software (SW) controls and new solutions in automation. Tecnatom has been leading various projects in this area for several years, both in Asian countries and in the United States, using in all cases international standards from which Tecnatom own methodologies have been developed and optimized. The experience acquired in applying this methodology to the design of new control rooms is to a large extent applicable also to the modernization of current control rooms. An adequate design of the interface between the operator and the systems will facilitate safe operation, contribute to the prompt identification of problems and help in the distribution of tasks and communications between the different members of the operating shift. Based on Tecnatom experience in the field, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Characterizing the acceleration time of laser-driven ion acceleration with data-informed neural networks

Peak ion energy is an important figure-of-merit in short-pulse, laser-driven ion acceleration and is dependent on an associated acceleration time. Standard metrics for these quantities depend on analytical results such as the self-similar fluid model or empirical models based on relatively small experimental and simulation datasets. In this work we attempt to use a data-informed neural network (NN) as a surrogate model for a large ensemble of PIC simulations to investigate an effective acceleration time. We explore the application of a stacked convolutional and recurrent NN architecture for improved regression by incorporating the time dependencies of the data into the training process. Of particular note is how pretraining a network on lower fidelity data, e.g. 1D analytical results, greatly improves the network's ability to learn more complex, higher fidelity data. Finally, the dependency of the acceleration time on various laser and plasma parameters is explored.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced Data Efficiency Using Deep Neural Networks and Gaussian Processes for Aerodynamic Design Optimization

Adjoint-based optimization methods are attractive for aerodynamic shape design primarily due to their computational costs being independent of the dimensionality of the input space and their ability to generate high-fidelity gradients that can then be used in a gradient-based optimizer. This makes them very well suited for high-fidelity simulation based aerodynamic shape optimization of highly parametrized geometries such as aircraft wings. However, the development of adjoint-based solvers involve careful mathematical treatment and their implementation require detailed software development. Furthermore, they can become prohibitively expensive when multiple optimization problems are being solved, each requiring multiple restarts to circumvent local optima. In this work, we propose a machine learning enabled, surrogate-based framework that replaces the expensive adjoint solver, without compromising on predicting predictive accuracy. Specifically, we first train a deep neural network (DNN) from training data generated from evaluating the high-fidelity simulation model on a model-agnostic design of experiments on the geometry shape parameters. The optimum shape may then be computed by using a gradient-based optimizer coupled with the trained DNN. Subsequently, we also perform a gradient-free Bayesian optimization, where the trained DNN is used as the prior mean. We observe that the latter framework (DNN-BO) improves upon the DNN-only based optimization strategy for the same computational cost. Overall, this framework predicts the true optimum with very high accuracy, while requiring far fewer high-fidelity function calls compared to the adjoint-based method. Furthermore, we show that multiple optimization problems can be solved with the same machine learning model with high accuracy, to amortize the offline costs associated with constructing our models. Our methodology finds applications in the early stages of aerospace design. (C) 2021 Published by Elsevier Masson SAS.

Renganathan, S. Ashwin↗