Search NASA⌕ Search

SEARCH · Search NASA

Results for “orbital dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Reduced-dynamic technique for precise orbit determination of low earth satellites

A reduced-dynamic technique for precise orbit determination of low earth satellites is described. This technique optimally combines the conventional dynamic technique with the nondynamic technique which uses differential GPS continuous carrier phase to define the state transition. A Kalman filter formulation for this reduced-dynamic technique is given. A covariance analysis shows that when neither the dynamic nor the nondynamic technique is clearly superior, the reduced-dynamic technique appreciably improves the orbit accuracy. Guidelines for selecting a near-optimum weighting for the combination are given. Sensitivity to suboptimal weighting is assessed.

Wu, Sien-Chong↗

The dynamics and control of large flexible space structures. Volume 3, part B: The modelling, dynamics, and stability of large Earth pointing orbiting structures

The dynamics and stability of large orbiting flexible beams, and platforms and dish type structures oriented along the local horizontal are treated both analytically and numerically. It is assumed that such structures could be gravitationally stabilized by attaching a rigid light-weight dumbbell at the center of mass by a spring loaded hinge which also could provide viscous damping. For the beam, the small amplitude inplane pitch motion, dumbbell librational motion, and the anti-symmetric elastic modes are all coupled. The three dimensional equations of motion for a circular flat plate and shallow spherical shell in orbit with a two-degree-of freedom gimballed dumbbell are also developed and show that only those elastic modes described by a single nodal diameter line are influenced by the dumbbell motion. Stability criteria are developed for all the examples and a sensitivity study of the system response characteristics to the key system parameters is carried out.

Bainum, P. M.↗

International Space Station Solar Alpha Rotary Joint Failure Analysis: The Materials and Processes Perspective

This paper summarizes the on-orbit structural dynamic data and the related modal analysis, model validation and correlation performed for the ISS configurations spanning ISS Stage 12A. The objective of this analysis is to validate and correlate analytical models used to verify the ISS critical interface dynamic loads and improve its fatigue life prediction. On-Orbit dynamic responses were measured during the ISS configurations throughout ISS Stage 12A by the two main ISS instrumentation systems; Internal Wireless Instrumentation System (IWIS) and the Structural Dynamic Measurement System (SDMS). These nominal on-orbit events include Russian vehicle docking and undockings. Also, the ISS photogrammetric system recorded the movements of the 2A and 4A solar arrays during a modified ISS maneuver. Modal analyses were performed on the measured data to extract modal parameters including frequency, damping and mode shapes. Correlation and comparisons between the test and analytical frequencies and mode shapes were performed to assess the accuracy of the analytical models for the ISS configurations under consideration.

Dasgupta, Rajib↗

ISS Stage 12A Post-Flight Modal Analysis, Model Validation and Correlation

This paper summarizes the on-orbit structural dynamic data and the related modal analysis, model validation and correlation performed for the ISS configurations spanning ISS Stage 12A. The objective of this analysis is to validate and correlate analytical models used to verify the ISS critical interface dynamic loads and improve its fatigue life prediction. On-Orbit dynamic responses were measured during the ISS configurations throughout ISS Stage 12A by the two main ISS instrumentation systems; Internal Wireless Instrumentation System (IWIS) and the Structural Dynamic Measurement System (SDMS). These nominal on-orbit events include Russian vehicle docking and undockings. Also, the ISS photogrammetric system recorded the movements of the 2A and 4A solar arrays during a modified ISS maneuver. Modal analyses were performed on the measured data to extract modal parameters including frequency, damping and mode shapes. Correlation and comparisons between the test and analytical frequencies and mode shapes were performed to assess the accuracy of the analytical models for the ISS configurations under consideration.

Fitzpatrick, Kristin↗

Dynamics of Earth orbiting formations

In this paper the equations of motion of a formation consisting of n spacecraft in Earth orbit are derived via Lagrange's equations. The equations of motion of the formation are developed with respect to both (1) a bound Keplerian reference orbit, and (2) a specific spacecraft in the formation. The major orbital perturbations acting on a formation in low Earth orbit are also included in the analysis. In contrast to the traditional approach based on the balance of linear momentum, the use of Lagrange's equations leads to a high-level matrix derivation of the formation equations of motion. The matrix form of the nonlinear motion equations is then linearized about a bound Keplerian reference orbit. Next, it is demonstrated that under the assumption of a circular reference orbit, the linearized equations of motion reduce to the well-known Hill-Clohessy-Wiltshire equations. The resulting linear and nonlinear dynamic equations lead to maximal physical insight into the structure of formation dynamics, and are ideally suited for use in the design and validation of formation guidance and control laws.

formation flying↗

Comparison of TOPEX/Poseidon orbit determination solutions obtained by the Goddard Space Flight Center Flight Dynamics Division and Precision Orbit Determination Teams

Orbit determination results are obtained by the Goddard Space Flight Center (GSFC) Flight Dynamics Division (FDD) using the Goddard Trajectory Determination System (GTDS) and a real-time extended Kalman filter estimation system to process Tracking Data and Relay Satellite (TDRS) System (TDRSS) measurements in support of the Ocean Topography Experiment (TOPEX)/Poseidon spacecraft navigation and health and safety operations. GTDS is the operational orbit determination system used by the FDD, and the extended Kalman fliter was implemented in an analysis prototype system, the Real-Time Orbit Determination System/Enhanced (RTOD/E). The Precision Orbit Determination (POD) team within the GSFC Space Geodesy Branch generates an independent set of high-accuracy trajectories to support the TOPEX/Poseidon scientific data. These latter solutions use the Geodynamics (GEODYN) orbit determination system with laser ranging tracking data. The TOPEX/Poseidon trajectories were estimated for the October 22 - November 1, 1992, timeframe, for which the latest preliminary POD results were available. Independent assessments were made of the consistencies of solutions produced by the batch and sequential methods. The batch cases were assessed using overlap comparisons, while the sequential cases were assessed with covariances and the first measurement residuals. The batch least-squares and forward-filtered RTOD/E orbit solutions were compared with the definitive POD orbit solutions. The solution differences were generally less than 10 meters (m) for the batch least squares and less than 18 m for the sequential estimation solutions. The differences among the POD, GTDS, and RTOD/E solutions can be traced to differences in modeling and tracking data types, which are being analyzed in detail.

Doll, C.↗

Orbit determination and prediction study for Dynamic Explorer 2

Definitive orbit determination accuracy and orbit prediction accuracy for the Dynamic Explorer-2 (DE-2) are studied using the trajectory determination system for the period within six weeks of spacecraft reentry. Baseline accuracies using standard orbit determination models and methods are established. A promising general technique for improving the orbit determination accuracy of high drag orbits, estimation of random drag variations at perigee passages, is investigated. This technique improved the fit to the tracking data by a factor of five and improved the solution overlap consistency by a factor of two during a period in which the spacecraft perigee altitude was below 200 kilometers. The results of the DE-2 orbit predictions showed that improvement in short term prediction accuracy reduces to the problem of predicting future drag scale factors: the smoothness of the solar 10.7 centimeter flux density suggests that this may be feasible.

Smith, R. L.↗

Dynamical in-orbit behavior of the Radio Astronomy Explorer satellite

Onboard sensors and associated ground based processing systems are used to maintain a well stabilized attitude for the RAE 1 in its near circular earth orbit despite the satellite's four extremely long and flexible antenna booms. Boom tip deflection pictures and central hub orientation measurements show that large boom vibrations and major attitude stability problems anticipated prior to launch have not materialized.

Walden, H.↗

In-orbit flexible spacecraft dynamics program

A continuous flexible body nonlinear dynamics computer program is used for simulating the spinning mode performance of a spacecraft under applied control torques. The program takes into account the continuous flexible nature of the antennas by representing deflections in terms of shape functions and integrated the spatial dependence in the formulation of the equations of motion. Comparison of RAE flight data on roll, pitch, and yaw with predictions of the computer program in the gravity gradient mode show fair to good agreement in roll and pitch and excellent agreement in the yaw angle.

Fedor, J. V.↗

Linear and nonlinear analysis of orbital telescope/space shuttle dynamics and control

Work completed on the design and study of an annular suspension and pointing (ASP) system for the space shuttle was presented. This system makes use of a magnetically suspended vernier pointing assembly. The following objectives were pursued in this study: (1) development of a detailed mathematical model of the Space Shuttle/ASP system, (2) design of control laws in order to obtain the desired pointing performance, and (3) prediction of the statistical pointing accuracies in the presence of stochastic disturbances such as crew-motion, and sensor and actuator noise. The first two of these objectives are documented in this report.

Roberts, A. S., Jr.↗

Preliminary sizing of vibration absorber for space mast structures

A simple method of sizing a vibration absorber for a large, cantilevered flexible mast is presented. The method is based on Den Hartog's vibration absorber theory for two-degree-of-freedom systems. Generalized design curves are presented as well as specific numerical results for a candidate space experiment in which a long flexible antenna mast is attached to the shuttle orbiter and dynamically excited by orbiter accelerations. Results indicate that for large flexible masts, the mass of the vibration absorber required to meet stringent tip deflection tolerances becomes prohibitively large.

Card, M. F.↗

Error dynamics and relative orbital uncertainty of the Magellan spacecraft

Relative error is discussed in light of a proposed orbiter mission to Venus. It is hypothesized that the relative (position) error of the orbiting spacecraft between disjoint data sets will be large because of residual uncertainties of the absolute estimates and their decorrelation caused by succeeding estimates. A method is proposed to limit relative error by inducing correlations between the estimates on successive data arcs. These correlations are induced by overlapping the data arcs. Covariance analyses of the data sets are undertaken at two distinct mapping times, yielding the relative error between those mapping times. The technique is applied to a mosaicking problem on a specific day in the mission.

Haw, R. J.↗

Interaction dynamics of an orbiter and a flexible space structure undergoing incremental in-space construction

A theoretical investigation is presented pertaining to the use of a Shuttle based remote manipulator system to construct and assemble the Space Station at the primary stage. The equations of motion for an on-orbit Space Shuttle with flexible or rigid remote manipulator system are developed including the effect of librational motion, starting and stopping motion constraints, and contact/impact conditions in maneuvering the Space Shuttle Remote Manipulator System (SRMS). Preliminary results indicated that the orbiting system may become unstable when certain disturbances have been triggered that provided a guideline in maneuvering the SRMS.

Chiou, J. C.↗

Dynamic Tow Maneuver Orbital Launch Technique

An orbital launch system and its method of operation use a maneuver to improve the launch condition of a booster rocket and payload. A towed launch aircraft, to which the booster rocket is mounted, is towed to a predetermined elevation and airspeed. The towed launch aircraft begins the maneuver by increasing its lift, thereby increasing the flight path angle, which increases the tension on the towline connecting the towed launch aircraft to a towing aircraft. The increased tension accelerates the towed launch aircraft and booster rocket, while decreasing the speed (and thus the kinetic energy) of the towing aircraft, while increasing kinetic energy of the towed launch aircraft and booster rocket by transferring energy from the towing aircraft. The potential energy of the towed launch aircraft and booster rocket is also increased, due to the increased lift. The booster rocket is released and ignited, completing the launch.

Rutan, Elbert L.↗

Dynamics of Planets Orbiting in the Alpha Centauri AB Stellar System

The Alpha Centauri system contains the Solar System's closest stellar neighbors. If an earth-like planet is present in the system, it could in principle be detected using a small space-based telescope. As Alpha Centauri is billions of years old, planets are only expected to be found in regions where their orbits are long-lived. We evaluate the extent of the regions within the Alpha Centauri AB system where small planets are able to orbit for billion-year timescales, as well as how closely-spaced planetary orbits can be within those regions in which individual planets can survive. Individual planets on nearly circular, coplanar orbits can survive throughout the habitable zones of both stars. However, perturbations from the companion star imply that the spacing of such planets in multi-planet systems must be significantly larger than the spacing of similar systems orbiting single stars in order to be long-lived. Because the binary companion induces a forced eccentricity upon the orbits of planets in orbit around either star, appropriately-phased circumstellar orbits with small initial eccentricities are stable to slightly larger initial semi-major axes than are initially circular orbits. Small initial eccentricities have a much larger effect on how closely planetary orbits can be spaced. Our results are of special interest as they can guide observers designing instrumentation and search strategies to attempt to discover planets orbiting the nearest sun-like stars. Results remain significantly higher than for planets orbiting single stars.

Lissauer, Jack J.↗