Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen atoms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Ground radiation tests and flight atomic oxygen tests of ITO protective coatings for Galileo Spacecraft

Radiation simulation tests (protons and electrons) were performed along with atomic oxygen flight tests aboard the Shuttle to space qualify the surface protective coatings. The results, which contributed to the selection of indium-tin-oxide (ITO) coated polyester as the material for the thermal blankets of the Galileo Spacecraft, are given here. Two candidate materials, polyester and Fluorglas, were radiation-tested to determine changes at simulated Jovian radiation levels. The polyester exhibited a smaller weight loss (2.8) than the Fluorglas (8.8 percent). Other changes of polyester are given. During low-earth orbit, prior to transit to Jupiter, the thermal blankets would be exposed to atomic oxygen. Samples of uncoated and ITO-coated polyesters were flown on the Shuttle. Qualitative results are given which indicated that the ITO coating protected the underlying polyester.

Bouquet, Frank L.↗
NASA NTRS1989

Undercutting of defects in thin film protective coatings on polymer surfaces exposed to atomic oxygen

Protection for polymeric surfaces is needed to make them durable in the low Earth orbital environment, where oxidation by atomic oxygen is the predominant failure mechanism. Thin film coatings of oxides such as silicon dioxide are viable candidates to provide this protection, but concern has been voiced over the ability of these coatings to protect when defects are present in the coating due to surface anomalies occurring during the deposition process, handling, or micrometeoroid and debris bombardment in low Earth orbit. When a defected coating protecting a polymer substrate is exposed to atomic oxygen, the defect provides a pathway to the underlying polymer allowing oxidation and subsequent undercutting to occur. Defect undercutting was studied for sputter deposited coatings of silicon dioxide on polyimide Kapton. Preliminary results indicate that undercutting may be limited as long as the coating remains intact with the substrate. Therefore, coatings may not need to be defect free to give protection to the underlying surface.

Rutledge, Sharon K.↗
NASA NTRS1987

Differential cross sections for scattering of 0.5-, 1.5-, and 5.0 keV oxygen atoms by He, N2, and O2

This paper reports measurements of absolute scattering cross sections, differential in angle, for collisions of ground-state oxygen atoms with He, N2, and O2. Data are presented for scattering of 0.5-, 1.5-, and 5.0-keV oxygen-atom projectiles in the range of laboratory frame angles between 0.06 and 5 deg. These measurements provide information relevant to calculations of the aeronomic consequences of O(+) precipitation in the earth's upper atmosphere.

Schafer, D. A.↗
NASA NTRS1992

Leveling coatings for reducing the atomic oxygen defect density in protected graphite fiber epoxy composites

Pinholes or other defect sites in a protective oxide coating provide pathways for atomic oxygen in low Earth orbit to reach underlying material. One concept for enhancing the lifetime of materials in low Earth orbits is to apply a leveling coating to the material prior to applying any reflective and protective coatings. Using a surface tension leveling coating concept, a low viscosity epoxy was applied to the surface of several composite coupons. A protective layer of 1000 A of SiO2 was deposited on top of the leveling coating, and the coupons were exposed to an atomic oxygen environment in a plasma asher. Pinhole populations per unit area were estimated by counting the number of undercut sites observed by scanning electron microscopy. Defect density values of 180,000 defects/sq cm were reduced to about 1000 defects/sq cm as a result of the applied leveling coating. These improvements occur at a mass penalty of about 2.5 mg/sq cm.

Jaworske, D. A.↗
NASA NTRS1992

Leveling coatings for reducing the atomic oxygen defect density in protected graphite fiber epoxy composites

Pinholes or other defect sites in a protective oxide coating provide pathways for atomic oxygen in low Earth orbit to reach underlying material. One concept of enhancing the lifetime of materials in low Earth orbit is to apply a leveling coating to the material prior to applying any reflective and protective coatings. Using a surface tension leveling coating concept, a low viscosity epoxy was applied to the surface of several composite coupons. A protective layer of 1000 A of SiO2 was deposited on top of the leveling coating, and the coupons were exposed to an atomic oxygen environment in a plasma asher. Pinhole populations per unit area were estimated by counting the number of undercut sites observed by scanning electron microscopy. Defect density values of 180,000 defects/sq cm were reduced to about 1000 defects/sq cm as a result of the applied leveling coating. These improvements occur at a mass penalty of about 2.5 mg/sq cm.

Jaworske, D. A.↗
NASA NTRS1977

Two photon excitation of atomic oxygen

A standard perturbation expansion in the atom-radiation field interaction is used to calculate the two photon excitation cross section for 1s(2) 2s(2) 2p(4) p3 to 1s(2) 2s(2) 2p(3) (s4) 3p p3 transition in atomic oxygen. The summation over bound and continuum intermediate states is handled by solving the equivalent inhomogeneous differential equation. Exact summation results differ by a factor of 2 from a rough estimate obtained by limiting the intermediate state summation to one bound state. Higher order electron correlation effects are also examined.

Pindzola, M. S.↗
NASA NTRS1978

Two-photon excitation of atomic oxygen

A standard perturbation expansion in the atom-radiation-field interaction is used to calculate the two-photon excitation cross section for the 1s2 2s2 2p4 3p to 1s2 2s2 3(4S)3p 3P transition in atomic oxygen. The lowest-order summation over bound and continuum intermediate states is handled by solving the equivalent inhomogeneous differential equation. Higher-order electron-correlation effects are also examined.

Pindzola, M. S.↗
NASA NTRS1978

Absolute cross section for photoionization of atomic oxygen

The absolute cross section for photoionization of atomic oxygen from the 2p4 3P ground state of O(0) to the 2p3 4S ground state of O(+) has been measured at five narrow wavelength intervals between 89.8 and 76.2 nm. The cross section near the 2p3 4S threshold is 4.5 Mb + or - 7%. Recent calculations by Taylor and Burke (1976) and by Pradhan and Saraph (1977) are in reasonable agreement with this work. The dipole-length results of Taylor and Burke (4.1 Mb) are in better agreement with the experiment than their dipole-velocity results (3.2 Mb).

Kohl, J. L.↗
NASA NTRS1992

The use of plasma ashers and Monte Carlo modeling for the projection of atomic oxygen durability of protected polymers in low Earth orbit

The results of ground laboratory and in-space exposure of polymeric materials to atomic oxygen has enabled the development of a Monte Carlo computational model which simulates the oxidation processes of both environments. The cost effective projection of long-term low-Earth-orbital durability of protected polymeric materials such as SiO(x)-coated polyimide Kapton photovoltaic array blankets will require ground-based testing to assure power system reliability. Although silicon dioxide thin film protective coatings can greatly extend the useful life of polymeric materials in ground-based testing, the projection of in-space durability based on these results can be made more reliable through the use of modeling which simulates the mechanistic properties of atomic oxygen interaction, and replicates test results in both environments. Techniques to project long-term performance of protected materials, such as the Space Station Freedom solar array blankets, are developed based on ground laboratory experiments, in-space experiments, and computational modeling.

Banks, Bruce A.↗
NASA NTRS1990

The effect of atomic oxygen on altered and coated Kapton surfaces for spacecraft applications in low earth orbit

A commercially applied silicon oxide coating on Kapton and an alternative material with Si groups on the surface were evaluated for durability with respect to atomic oxygen in both a random plasma and a directed atomic oxygen beam system. It is found that the alternative to Kapton, DuPont 93-1, is not adequately protecting to last 15 years in LEO, the desired operation time of the Space Station Freedom. The coated Kapton is considered to be promising due to the adherence of the coating and lack of extensive tearing at undercut defect sites. Fewer defects in the coating and elimination of long scratches and uncoated areas would substantially improve the durability of this material.

Rutledge, Sharon K.↗
NASA NTRS1979

Dynamical effects on the global distribution of thermospheric atomic oxygen

Results are presented of calculations pertaining to the effects of global-scale dynamical processes on the coupled seasonal and diurnal variations of atomic oxygen in the altitude range 90-500 km. The calculations are based on a three-dimensional numerical model of thermospheric dynamics which treats the three gases N2, O2, and O simultaneously, coupled together by collisional processes. The model is described, and the results of the calculations under both equinox and solstice conditions and a comparison with observational data are discussed. It is shown that none of these gases can be considered to be in hydrostatic equilibrium below about 200 km, and that global-scale winds cause the observed winter enhancement of atomic oxygen.

Straus, J. M.↗
NASA NTRS1984

Interaction of atomic oxygen with solid surfaces at orbital altitudes (A0114)

The basic approach to this experiment is to expose a wide variety of material surfaces to the atomic flux in orbit. The experiment is passive and depends on preflight and postflight measurements of the test surfaces in the laboratory. The experiment will also include a reflectometer device to measure atomic beam reflection angles and thus momentum accommodations, and a unique passive spacecraft attitude sensor. Samples consisting of solid disks or thin film coatings on substrate disks will be mounted in a panel. The face of this panel will be flown on Long Duration Exposure Facility normal to the incident stream of oxygen atoms. Each disk will have part of its front surface masked so exposure to the atomic-oxygen reaction will be limited to selected areas, the shadowed areas being used as control surfaces in the measurements. A typical sample is an optically flat quartz disk overcoated with a film of the material of interest. These include Ag, Au, Pt, Nb, Ni, Al, C, Si, Ge, LiF, and a few engineering materials. Some materials for which the expected removal rate is high, such as carbon, will be solid disks rather than thin films.

Gregory, J. C.↗
NASA NTRS1977

Thermospheric meridional winds and atomic oxygen depletion at high latitudes

Rocket vapor trail measurements of the properties of the high latitude wind system are compared with Ogo 6 measurements, the atomic densities being studied as a function of geomagnetic local time at three seasons for three ranges of magnetic activity. It is found that the atomic oxygen densities at altitudes in the region of 120 km are about 35% lower in the post-midnight sector than in the afternoon and evening sectors, decrease with increasing magnetic activity, and are lower in summer than in winter. The variations are related to vertical velocities in the 95-150 km altitude range and to the meridional fluxes at 70 deg geomagnetic latitude. The upward average vertical velocity of atomic oxygen in the region poleward of 70 deg is calculated to be of the order of 0.3 m/s at 120 km and the energy transported by the winds out of this region is calculated to be of the order of 10 to the 10th W for Kp levels of 2.

Nisbet, J. S.↗
NASA NTRS1989

ESCA Study of Poly (Vinylidene Fluoride) Tetrafluoroethylene - Ethylene Copolymer and Polyethylene Exposed to Atomic Oxygen

The ESCA (electron spectroscopy for chemical analysis) spectra of films of poly(vinylidene fluoride) (PVDF), tetrafluoroethylene-ethylene copolymer (TFE/ET) and polyethylene (PE) exposed to atomic oxygen (O(P-3)), in or out of the glow of a radio-frequency O2 plasma, were compared. ESCA spectra of PE films exposed to (O(P-3)) in low Earth orbit (LEO) on the STS-8 Space Shuttle were also examined. Apart from O(P-3)-induced surface recession (etching), the various polymer films exhibited surface oxidation, which proceeded towards equilibrium saturation oxygen levels. The maximum surface oxygen uptakes for in-glow or out-of-glow exposures were in the order: PE greater than TFE/ET greater than PVDF; for PE itself, the oxygen uptakes were in the order: in glow greater than out of glow greater than LEO. Given prior ESCA data on poly(vinyl fluoride) and polytetrafluoroethylene films exposed to O(P-3), the extent of surface oxidation is seen to decrease regularly with increase in fluorine substitution in a family of ethylene-type polymers. (Keywords: ESCA; poly(vinylidene fluoride); tetrafluoroethylene ethylene copolymer; polyethylene; atomic oxygen; radio-frequency oxygen plasma; low Earth orbit)

Golub, Morton A.↗