Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Synthesis routes to eliminate oxide impurity segregation and their influence on intergrain connectivity in K-doped BaFe 2 As 2 polycrystalline bulks

The poor reproducibility of intergrain critical current density $J_c$ in Fe-based superconductors is often believed to result from uncontrolled grain boundary (GB) connectivity degraded by extrinsic factors such as the local or global impurity concentration or GB porosity or cracks. Earlier we found that Ba and K can appear as oxide impurities at GBs, along with GB-wetting FeAs. In this study, we evaluated how the sample preparation environment and purity of the starting materials influence the polycrystalline $J_c$ in K-doped BaFe 2 As 2 (Ba122) bulks. Using a high-performance glovebox, the oxygen and water levels were significantly reduced, eliminating traces of FeAs. We report oxide impurities and Ba (or K) segregation associated with oxygen in the starting materials were significantly reduced by using high purity starting materials. This combination essentially doubled the best $J_c$(4.2 K) values to 2.3 × 10 5 at self-field and 1.6 × 10 4 A cm –2 at 10 T and analytical scanning transmission electron microscopy showed no GB or O segregation in the best samples, but did show dark Z-contrast and distinct nanoscale porosity. Our work shows that an inert synthesis environment and high purity K and Ba do reduce current-blocking oxygen impurity and GB impurity phases, allowing deeper exploration of the role of extrinsic and intrinsic GB blocking effects in controlling the $J_c$ of polycrystalline Ba122.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Structural changes induced by electric currents in a single crystal of Pr 2 CuO 4

We demonstrate an approach to the structural and electronic property modification of perovskites, focusing on Pr 2 CuO 4 , an undoped parent compound of a class of electron-doped copper-oxide superconductors. Currents were passed parallel or perpendicular to the copper oxygen layers with the voltage ramped up until a rapid drop in the resistivity was achieved, a process referred to as “flash.” The current was then further increased tenfold in current-control mode. This state was quenched by immersion into liquid nitrogen. Flash can drive many compounds into different atomic structures with new properties, whereas the quench freezes them into a long-lived state. Single-crystal neutron diffraction of as-grown and modified Pr 2 CuO 4 revealed a √10 ×√10 superlattice due to oxygen-vacancy order. The diffraction peak intensities of the superlattice of the modified sample were significantly enhanced relative to the pristine sample. Raman-active phonons in the modified sample were considerably sharper. Measurements of electrical resistivity, magnetization, and two-magnon Raman scattering indicate that the modification affected only the Pr-O layers, but not the Cu-O planes. These results point to enhanced oxygen-vacancy order in the modified samples well beyond what can be achieved without passing electrical current. Our work opens a new avenue toward electric field/quench control of structure and properties of layered perovskite oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Systematic Study of Different Anion Doping on the Electrochemical Performance of Cobalt-Free Lithium–Manganese-Rich Layered Cathode

Regardless of the appealingly high energy density (1000 Wh kg –1 ) of the lithium–manganese-rich layered oxide cathode (LMR-NMO), this material still suffers from rapid capacity and voltage decay after continuous cycling. LMR-NMO involves the redox reaction of both transition metals and oxygen to gain additional capacity in comparison with a conventional NMC cathode. Due to the use of a high voltage range (beyond 4.4 V), the oxygen release from the structure initiates and in turn generates intergranular cracks and spinel formation, consequently, into rock-salt structure. Here, LMR-NMO with different doping ranges (1–5 mol %) of F, S, and Cl are being examined to summarize the benefits and drawbacks of each anion. This study shows that F is the best candidate as it increases average voltage (voltage retention 96–97% after 200 cycles at 0.5 C), improves ionic conductivity (nearly two times higher than pristine), reduces cation mixing, minimizes oxygen release, and offers high stability during high temperature cycle. However, for S and Cl, the results are conflicted. An optimal amount of anion dopants should be considered as the side effects might overcome the benefits when the doping amount is excessive.

25 ENERGY STORAGE↗
DOE OSTI2022

High Performance SOFCs with a Superior Stability for Reliable and Durable Power Systems

Next generation of fuel cells, electrolyzers, and batteries requires higher power, faster kinetics, and larger energy density, which necessitate the use of compositionally complex oxides to achieve multifunctionalities and activity. These compositionally complex oxides may change their phases and structures during an electrochemical process – a so-called “electrochemically driven phase transformation”. The origin for such a phase change has remained obscure. More importantly, there is a need to develop high performance solid oxide fuel cells with an enhanced stability. In this work, the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) cathode surface is modified by infiltration of Pr 6 O 11 and the power density at 0.8V and 750 °C is improved by 21%. In addition, by replacing the traditional barrier layer Gd 0.2 Ce 0.8 O 1.9 with mixed conducting Pr 0.1 Gd 0.1 Ce 0.8 O 1.9 , the power density increases by 38%. The different mechanism of promotions was investigated by electrochemical impedance spectroscopy. The ohmic resistance is dramatically reduced by applying the PGCO interlayer, and the distribution of relaxation time was used to analyze the mechanism for which the polarization resistance was decreased attributing to the mixed conduction nature in PrO x . An increase of power density at 0.8 V of 0.358 W/cm 2 (71%) is achieved with the implementation of both surface modification and buffer layer engineering. An experimental study and a theoretical analysis were then carried out on phase evolution in praseodymium nickelates. Nickelate-based electrodes show up to 60× greater phase transformation during operation when compared to thermally annealed ones. Theoretical analysis suggests that the presence of a reduced oxygen partial pressure at the interface between the oxygen electrode and the electrolyte is the origin for the phase change in an oxygen electrode. Guided by the theory, an addition of the electronic conduction in the interface layer leads to the significant suppression of phase change, while improving cell performance and performance stability. When an oxygen electrode is under polarization, the oxygen partial pressure at the interface between the oxygen electrode and the electrolyte is lower than that of incoming oxidant. Under a high polarization, the environment at the aforementioned interface may lead to phase transformation of the oxygen electrode. The local oxygen partial pressure is determined by the transport properties at the interfaces. An addition of the electronic conduction in the interface layer, for instance using (Pr,Gd)-doped ceria to replace Gd-doped ceria, results in improved cell performance and performance stability, while the phase transformation is significantly suppressed. This work provides a fundamental understanding of the origin for phase transformation in oxygen electrodes during operation and use this knowledge to develop a high-performance electrode that exhibits improved performance stability.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Highly Selective Oxygen Reduction to Hydrogen Peroxide on a Carbon-Supported Single-Atom Pd Electrocatalyst

Selective electrochemical two-electron oxygen reduction is a promising route for renewable and on-site H 2 O 2 generation as an alternative to the anthraquinone process. In this study, we report a high-performance nitrogen-coordinated single-atom Pd electrocatalyst, which is derived from Pd-doped zeolitic imidazolate frameworks (ZIFs) through one-step thermolysis. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) combined with X-ray absorption spectroscopy verifies atomically dispersed Pd atoms on nitrogen-doped carbon (Pd-NC). The single-atom Pd-NC catalyst exhibits excellent electrocatalytic performance for two-electron oxygen reduction to H 2 O 2 , which shows ~95% selectivity toward H 2 O 2 and an unprecedented onset potential of ~0.8 V versus revisable hydrogen electrode (RHE) in 0.1 M KOH. Density functional theory (DFT) calculations demonstrate that the Pd-N 4 catalytic sites thermodynamically prefer *–O bond breaking to O–O bond breaking, corresponding to a high selectivity for H 2 O 2 production. This work provides a deep insight into the understanding of the catalytic process and design of high-performance 2e– ORR catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ultra-Low Amounts of Transition Metals in Carbon-Based Catalysts Improve Their Alkaline OER Performance: A Systematic Study

The pursuit of green hydrogen production highlights a persistent gap in electrocatalyst research: while academic efforts prioritize cost-efficiency via activity enhancement, industrial viability demands greater emphasis on electrochemical stability. Carbon-based electrocatalysts, particularly those incorporating transition metals, have shown promise in alkaline oxygen evolution (OER) due to their high activity, cost-efficiency, and resource-efficiency. However, these catalysts suffer from insufficient stability under oxidizing conditions compared to pure transition metal catalysts due to erosion of the carbon support resulting from carbon corrosion, among other degradation mechanisms. In this systematic study, the influence of ultra-low amounts (<1 wt %) of iron, cobalt, nickel, and their most common combinations on the stability of a hydrothermally derived, N-doped carbon support and the overall catalyst performance during alkaline OER is systematically explored. By identifying critical stability descriptors and correlating them with synthesis conditions and catalyst properties, primary and secondary corrosion pathways are unraveled. Subsequently, through careful adjustment of carbonization temperature and composition of incorporated transition metals, overall catalyst corrosion can be suppressed immensely. Especially, the inclusion of Ni and Fe is paramount for the formation of stable catalyst materials under laboratory conditions (10 mA/cm 2 in 0.1 M KOH), which is surprisingly unconstrained by the degree of graphitization of the carbon support. Mixing this electrochemically stable material with a graphitic carbon powder results in an excellent stability of over 400 h at 100 mA/cm 2 in 1 M KOH, implying great potential for the future improvement of carbon-based electrodes under oxidizing conditions toward industrial application.

N-doped carbon↗
DOE OSTI2022

Electron Redistributed S-Doped Nickel Iron Phosphides Derived from One-Step Phosphatization of MOFs for Significantly Boosting Electrochemical Water Splitting

Nonprecious transition metal-organic frameworks (MOFs) are one of the most promising precursors for developing electrocatalysts with high porosity and structural rigidity. This study reports the synthesis of high efficiency electrocatalysts based on S-doped NiFeP. MOF-derived S-doped NiFeP structure is synthesized by a one-step phosphorization process with using S-doped MOFs as the precursor, which is more convenient and environment friendly, and also helps retain the samples’ framework. The oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance of the NiFeP catalysts can be improved after partially replacing P by S due to the tunable electronic structure. The optimized CCS-NiFeP-10 reaches a current density of 10 mA cm –2 for OER with an overpotential of 201 mV and outperforms most NiFe-based catalysts. The S doping plays an important role in tuning the ΔG values for intermediates formation in Ni atoms to a suitable value and exhibits a pronouncedly improved the OER performance. CCS-NiFeP-20 sample presents excellent HER performance due to the d-band center downshifting from the Fermi level. When the voltage of the electrolytic cell is 1.50 V, a current density of 10 mA cm –2 can be obtained. This strategy paves the way for designing highly active none-noble metal catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Transition metal vacancy and position engineering enables reversible anionic redox reaction for sodium storage

Triggering the anionic redox reaction is an effective approach to boost the capacity of layered transition metal (TM) oxides. However, the irreversible oxygen release and structural deterioration at high voltage remain conundrums. Herein, a strategy for Mg ion and vacancy dual doping with partial TM ions pinned in the Na layers is developed to improve both the reversibility of anionic redox reaction and structural stability of layered oxides. Both the Mg ions and vacancies (□) are contained in the TM layers, while partial Mn ions (~1.1%) occupy the Na-sites. The introduced Mg ions combined with vacancies not only create abundant nonbonding O 2p orbitals in favor of high oxygen redox capacity, but also suppress the voltage decay originated from Na–O–□ configuration. The Mn ions pinned in the Na layers act as “rivets” to restrain the slab gliding at extreme de-sodiated state and thereby inhibit the generation of cracks. The positive electrode, Na 0.67 Mn 0.011 [Mg 0.1 □ 0.07 Mn 0.83 ]O 2 , delivers an enhanced discharge capacity and decent cyclability. This study provides insights into the construction of stable layered oxide positive electrode with highly reversible anionic redox reaction for sodium storage.

Cai, Congcong [Wuhan Univ. of Technology (China)]↗
DOE OSTI2021

DEVELOPMENT OF STABLE ANODE AND CATHODE MATERIALS FOR RECHARGEABLE BATTERIES

Batteries have been employed in a variety of applications, such as portable electronics, electric vehicles (EVs), and stationary energy storage to preserve energy from other renewable sources (like wind or solar energy). The ultimate goal is to develop high energy density, long life span, better safety, and low cost of the batteries. However, current commercialized batteries (like lead-acid, zinc-alkaline, lithium-ion batteries (LIBs)) could not fulfill all the demands of diversified applications. LIBs predominate the market because of their high energy density. To achieve a higher capacity of the cell, high-nickel layered (Ni > 90%) cathode materials are promising candidates since they compose high specific capacity and discharge voltage. In chapter 1, an introduction to cell energy density and the development of high-nickel layered cathode materials along with associated obstacles of poor cycling stability and thermal stability have been discussed. Associated works like doping or surface coating have also been mentioned in this section. In chapter 2, Al doping in high-nickel layered cathode materials to enhance the structural and thermal stability was introduced. Uniform incorporation of Al doping is achieved by mechanical fusion and calcination processes. The Al doping not only decreased the Li/Ni mixing ratio but also enhance the thermal resistance to oxygen evolution because of strong Al-O bonding, which leads to elevated electrochemical and thermal stability. In chapter 3, TiN is implemented as a Ti dopant for high-nickel layered cathode materials to improve the electrochemical performance in the LIBs. The Ti not only diffused within the bulk structure but also formed segregation on the surface, which improved the structural stability and led to better cycling performance. Although LIBs deliver high energy density, safety concerns of flammable organic electrolytes have not been resolved yet. Therefore, the aqueous rechargeable zinc-ion batteries (ZIB) have been praised for their safe, low-cost, eco-friendly stationary energy storage, which is considered as a complementary system to LIBs. In chapter 4, the mechanism, advantages, and challenges of ZIBs would be given and the strategies for solving the zinc metal anode issues have been discussed in this section. In chapter 5, a polymer coating method was reported to facilitate Zn deposition/ stripping by coordination with Zn2+ and prevented direct contact with aqueous electrolyte to block corrosion side-reactions. With this coating, a boost in a lifetime (up to 400 hours) and lower polarization under extremely high current conditions (10 mA cm-2) have been achieved in repeated Zn deposition/ stripping cycling.

25 ENERGY STORAGE↗
DOE OSTI2025

Modulating Surface Anionic Redox Chemistry toward Highly Stable Li-Rich Cathodes with Negligible Oxygen Loss

Low initial Coulombic efficiency and severe capacity/voltage fading during cycling caused by serious irreversible oxygen release, especially in the initial cycle, and resultantly induced unstable electrode/electrolyte interfacial chemistry, largely prohibit the commercial application of high-capacity Li-rich layered oxide cathodes (LLOs). Here, in this work, a dual reductive gas interface cotreatment strategy is applied to regulate the lattice oxygen redox activity and reversibility with a multiple defective structure design including Li/O/TM (TM = transition metal) vacancies and the intrinsic TM doping as well as a full-surface protective layer, which can suppress the irreversible TM migration and then undesirable phase transformation, resisting the corrosion of electrolyte during cycling effectively. Importantly, the introduced reversible SO 3 2- /SO 4 2- redox couple that provides extra capacity compensation could alleviate the distortion of oxygen-central octahedral structure and structural collapse caused by immoderate oxygen oxidation. Thus, the lattice oxygen redox chemistry is optimized, with negligible oxygen loss during the initial cycle. And the designed AS-LLO cathode with greatly enhanced structure stability shows high-capacity retentions of 99.2% at 0.3C after 100 cycles and 82.4% even after 1000 cycles at 5C. This work provides a guideline for manipulating the oxygen redox chemistry to achieve long-lifespan Li-rich layered oxide cathodes for high-energy-density lithium batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Insights into the Oxygen Evolution Reaction on Graphene-Based Single-Atom Catalysts from First-Principles-Informed Microkinetic Modeling

Single-atom transition metals embedded in nitrogen-doped graphene have emerged as promising electrocatalysts due to their high activity and low material cost. These materials have been shown to catalyze a variety of electrochemical reactions, but their active sites under reaction conditions remain poorly understood. Using first-principles density functional theory calculations, we develop a pH-dependent microkinetic model to evaluate the relative performance of transition metal catalysts embedded in fourfold N-substituted double carbon vacancies in graphene for the oxygen evolution reaction. We find that reaction pathways involving intermediates co-adsorbed on the metal site are preferred on all transition metals. These pathways lead to enhancements in catalytic activity and broaden the activity peak when compared with purely thermodynamics-based predictions. Furthermore, these findings demonstrate the importance of investigating reaction pathways on graphene-based catalysts and other two-dimensional (2D) materials that involve metal active centers decorated by spectator intermediate species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces

Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, which are desirable as catalysts in green energy conversion technologies. It is crucial to precisely tailor the nanoparticle characteristics to optimize the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and examine its influence on the mass transfer kinetics of Ni dopants towards the oxide surface and on the subsequent coalescence behavior of the exsolved nanoparticles during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the acceptor-type fast-oxygen-ion-conductor SrTi 0.95 Ni 0.05 O 3–δ (STNi) show a high surface mobility leading to a very low thermal stability compared to nanoparticles that exsolve at the surface of donor-type SrTi 0.9 Nb 0.05 Ni 0.05 O 3–δ (STNNi). Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is linked to a high oxygen vacancy concentration at the nanoparticle-oxide interface. For catalysts that require fast oxygen exchange kinetics, exsolution synthesis routes in dry hydrogen conditions may hence lead to accelerated degradation, while humid reaction conditions may mitigate this failure mechanism.

25 ENERGY STORAGE↗
DOE OSTI2021

Zinc–hydrogen and zinc–iridium pairs in β-Ga 2 O 3

Zinc-doped monoclinic gallium oxide (β-Ga 2 O 3 :Zn) has semi-insulating properties that could make it a preferred material as a substrate for power devices. In this work, infrared and UV/Visible spectroscopy were used to investigate the defect properties of bulk β-Ga 2 O 3 :Zn crystals. As-grown crystals contain a single O-H stretching mode at 3486.7 cm -1 due to a neutral ZnH complex. A deuterium-annealed sample displays the corresponding O-D stretching mode at 2582.9 cm -1 , confirming the O-H assignment. A strong Ir 4+ electronic transition at 5147.6 cm -1 is also observed, along with sidebands attributed to ZnIr pairs. These sidebands show distinct differences compared with Mg-doped samples; most importantly, several peaks are attributed to Ir 4+ paired with a Zn on the tetrahedral Ga(I) site. Annealing under an oxygen atmosphere produced insulating material with a resistance above 1 TΩ.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Orbital Hybridization and Magnetic Coupling at Cuprate–Manganite Interfaces Driven by Manganite Doping

Fundamental understanding of interface mechanisms that generate unexpected physical properties in the cuprate/manganite heterostructures is essential for possible applications as spintronic devices. In this study, CaCuO 2 /La 1–x Sr x MnO 3 (CCO/LSMO) superlattices are investigated, where the infinite-layer cuprate CCO does not have apical oxygen for Cu in the Ca-plane so that the Mn–O–Cu superexchange coupling can be only present at the MnO 2 –(La,Sr)O–CuO 2 interface. Two different doping states for the manganites are studied, namely x = 0.1 and x = 0.3, corresponding to the ferromagnetic insulating and ferromagnetic metallic states, respectively, in the manganite phase diagram. Linear and circular dichroism in X-ray absorption by synchrotron radiation at Cu and Mn L-edges clearly demonstrate that in the absence of apical oxygen in the cuprate block, the magnetic coupling between the LSMO and CCO is weakly ferromagnetic when LSMO is metallic, while it is antiferromagnetic when LSMO is insulating, along with an increased Cu 3d(3z 2 –r 2 ) and Mn 3d(3z 2 –r 2 ) orbital occupation. It is proposed that the Mn 3d valence band upward shift driven by the enhancement of Mn 3+ content in the underdoped sample enhances the orbital hybridization. The stronger hybridization at the interface MnO 2 –(La,Sr)O–CuO 2 gives rise to the antiferromagnetic coupling between cuprate and underdoped manganite.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Localizing Tungsten Single Atoms around Tungsten Nitride Nanoparticles for Efficient Oxygen Reduction Electrocatalysis in Metal–Air Batteries

Combining isolated atomic active sites with those in nanoparticles for synergizing complex multistep catalysis is being actively pursued in the design of new electrocatalyst systems. However, these novel systems have been rarely studied due to the challenges with synthesis and analysis. Herein, a synergistically catalytic performance is demonstrated with a 0.89 V (vs reversible hydrogen electrode) onset potential in the four-step oxygen reduction reaction (ORR) by localizing tungsten single atoms around tungsten nitride nanoparticles confined into nitrogen-doped carbon (W SAs/WNNC). Through density functional theory calculations, it is shown that each of the active centers in the synergistic entity feature a specific potential-determining step in their respective reaction pathway that can be merged to optimize the intermediate steps involving scaling relations on individual active centers. Impressively, the W SAs/WNNC as the air cathode in all-solid-state Zn-air and Al-air batteries demonstrate competitive durability and reversibility, despite the acknowledged low activity of W-based catalyst toward the ORR.

25 ENERGY STORAGE↗
DOE OSTI2020

From cellulose to 1,2,4-benzenetriol via catalytic degradation over a wood-based activated carbon catalyst

In this study, spherical P-doped activated carbon (CSP) was obtained from poplar bark by microwave carbonization with phosphoric acid as the dopant and activating agent. Phosphorus bonded with four oxygen atoms to form a phosphate-like structure rather than directly bonding with C atoms in CSP; such groups can provide Lewis acid active sites with moderately strong acidity. The Lewis acid and total acid content increased with increasing phosphoric acid doping ratio. The use of phosphoric acid as an activating agent promotes the formation of a developed porous structure. CSP 1 (mass ratio of raw material to acid = 1 : 1) had a specific surface area of 1115 m 2 g –1 with developed micro–mesoporous structures, mainly micropores. Investigation of the activity of CSP in catalytic cellulose hydrolysis during hydrothermal degradation showed that Brønsted acid sites promote hydrolysis and dehydration of cellulose, Lewis acid sites promote subsequent reactions such as isomerization, rearrangement, and oligomerization, and the developed pores can provide reaction sites and facilitate reactant transportation. The optimal reaction conditions, i.e. , 1 h at 230 °C and 1 MPa with CSP 1 (0.4 g) as the catalyst, gave a cellulose conversion of >99.9%, with 42.30% selectivity for 1,2,4-benzenetriol. This study provides an effective method for preparing 1,2,4-benzenetriol from cellulose with biomass-based activated carbon as the catalyst, which enables green synthesis of 1,2,4-benzenetriol and promotes the use of biomass waste resources.

1,2,4-benzenetriol↗
DOE OSTI2026

Measuring the neutrino-oxygen neutral current quasielastic cross section using the accelerator neutrino neutron interaction experiment

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is a 26-ton gadolinium-doped water Cherenkov detector located on-axis to Fermilab’s Booster Neutrino Beam (BNB). ANNIE is uniquely positioned to perform high-statistics measurements of neutrino-nucleus interactions in water, benefiting from a large neutrino flux due to a short (100-meter) baseline. A central focus of ANNIE’s physics program is the measurement of both charged current (CC) and neutral current (NC) cross sections on water, including neutral current quasielastic (NCQE) and CC-inclusive channels. The NCQE measurement is particularly critical for constraining uncertainties in rare-event searches such as the Diffuse Supernova Neutrino Background (DSNB), where atmospheric $\nu$NCQE interactions constitute a significant and poorly constrained background. This dissertation presents a measurement of the flux-averaged neutrino-oxygen neutral current quasielastic ($\nu$NCQE) cross section using $2.573 \times 10^{20}$~POT of BNB exposure from the 2022 and 2023 beam years. The $\nu$NCQE interaction is identified through the primary $\gamma$-rays produced by nuclear de-excitation of the residual $^{15}$N$^*$ or $^{15}$O$^*$ nucleus following nucleon knockout from $^{16}$O. A dedicated Monte Carlo (MC) re-tuning campaign was conducted using an americium-beryllium (AmBe) calibration source, Michel electrons from stopped muons, and throughgoing dirt muons originating upstream of the detector. This multi-sample approach provided a wide-ranging $\mathcal{O}(\text{MeV})$--$\mathcal{O}(\text{GeV})$ dataset for tuning the simulated detector response, which was subsequently validated against AmBe neutron and Michel electron data for use in the $\nu$NCQE analysis. A dedicated laser calibration campaign was carried out to reduce timing uncertainties across the PMT system, enabling reconstruction of the BNB bunch substructure with sufficient resolution to serve as a background rejection tool. By selecting events in-time with individual neutrino bunches, beam-correlated $\nu$NCQE events are separated from diffuse and accelerator-induced backgrounds, notably skyshine neutrons and externally-originating events, that would otherwise dominate traditional charge-based selections within a small-scale, surface-level, short-baseline detector. A data-driven estimation of the skyshine neutron and external background rates was performed and incorporated into the systematic uncertainty budget. The flux-averaged $\nu$NCQE cross section on oxygen is measured to be $1.57 \pm 0.06\,(\text{stat.})$ $^{+0.91}_{-0.67}\,(\text{syst.})$ $\times 10^{-38}\ \text{cm}^{2}$. A full systematic budget is constructed by propagating uncertainties in the secondary hadronic interaction modeling, background cross section normalizations, detector response, neutrino flux, and the primary $\gamma$-ray emission probabilities from oxygen nuclear de-excitation. An idealized de-excitation model, constructed from existing measurements in the literature is developed to benchmark the predictions of the \textsc{GENIE} event generator. A comparison reveals that \textsc{GENIE} systematically overpredicts the primary $\gamma$-ray emission probability from oxygen de-excitation by a factor of $1.49\times$ for $E_\gamma > 6$~MeV and $3.07\times$ in the $3$--$6$~MeV band. This comparison motivates the dominant systematic uncertainty in this analysis, where a conservative uncertainty of $^{+39.9\%}_{-0\%}$ on the primary $\gamma$-ray signal prediction is assigned. The ANNIE result is consistent with and complementary to existing flux-averaged $\nu$NCQE cross section measurements from T2K and Super-Kamiokande, providing an independent measurement with a different detector, neutrino beam, and analysis methodology. Looking ahead, an upgrade to the ANNIE DAQ infrastructure enabling continuous extended readout will allow a complementary $\nu$NCQE neutron multiplicity measurement, directly relevant to constraining the NCQE background in DSNB searches, competitive with the recent T2K measurement at SK-Gd. The planned Super-SANDI upgrade, deploying a large Water-based Liquid Scintillator (WbLS) volume, will further extend ANNIE's reach to hadronic final states and exclusive NC channels, and enable joint measurements with liquid argon detectors sharing the BNB beamline ahead of DUNE and Hyper-Kamiokande.

Doran, Steven [Iowa State U.]↗