SEARCH · Search NASA

Results for “parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Continuation in a parameter - Experience with viscous and free surface flows

The results of modifications in continuation methods applied to obtain solutions to the Navier-Stokes systems of equations for incompressible, two-dimensional, steady flows are reported. It is shown that parameter continuation permits prediction of accurate, initial estimates for iterative processing of nonlinear finite difference and finite element equations of motions. The new parameter steps are derived from values of the preceding parameter steps. The accuracy of the estimates is ensured with appropriate choices of the step size. The continuation predictor/iterative corrector is demonstrated to trace the branches of parameter space along which steady flow states are found, and techniques are available for tracing multiply branching paths. The techniques are applied to solving the Navier-Stokes equations for flow through a rotating square channel, the formation of a falling liquid curtain, and gyrostatic equilibria of rotating cylindrical drops.

Kheshgi, H. S.↗

NASA NTRS1984

Discrete approximation methods for parameter identification in delay systems

Approximation schemes for parameter identification problems in which the governing state equation is a linear functional differential equation of retarded type are constructed. The basis of the schemes is the replacement of the parameter identification problem having an infinite dimensional state equation by a sequence of approximating parameter identification problems in which the states are given by finite dimensional discrete difference equations. The difference equations are constructed using linear semigroup theory and rational function approximations to the exponential. Sufficient conditions are given for the convergence of solutions to the approximating problems, which can be obtained using conventional methods, to solutions to the original parameter identification problem. Finite difference and spline based schemes using Paderational function approximations to the exponential are constructed, and shown to satisfy the sufficient conditions for convergence. A discussion and analysis of numerical results obtained through the application of the schemes to several examples is included.

Rosen, I. G.↗

NASA NTRS1984

A generalized multiple-input, multiple-output modal parameter estimation algorithm

A new method for experimental determination of the modal parameters of a structure is presented. The method allows for multiple input forces to be applied simultaneously, and for an arbitrary number of acceleration response measurements to be employed. These data are used to form the equations of motion for a damped linear elastic structure. The modal parameters are then obtained through an eigenvalue technique. In conjunction with the development of the equations, an extensive computer simulation study was performed. The results of the study show a marked improvement in the mode shape identification for closely-spaced modes as the number of applied forces is increased. Also demonstrated is the influence of noise on the method's ability to identify accurate modal parameters. Here again, an increase in the number of exciters leads to a significant improvement in the identified parameters.

Craig, R. R., Jr.↗

NASA NTRS1984

Estimated low-speed aerodynamic parameters of an advanced fighter from flight and wind tunnel data

A procedure for determination of aerodynamic model structure and estimation of aerodynamic parameters is applied to data from a modern fighter operating within an angle of attack range of 5 to 60 deg. The paper briefly describes the airplane, flight and wind tunnel data available, postulated models for airplane aerodynamic coefficients and flight data analysis. The results presented contain only a small number of selected longitudinal and lateral parameters. These parameters were obtained from various maneuvers and subsets of joined data from several flights. The estimated parameters are in good agreement with the wind tunnel measurements. The resulting aerodynamic model equations seem to be satisfactory for the prediction of airplane motion.

Klein, V.↗

NASA NTRS1985

Stokes parameters modulator for birefringent filters

The Solar Birefringent Filter (Filter Polarisiant Solaire Selectif FPSS) of Meudon Observatory is presently located at the focus of a solar refractor with a 28 cm lens directly pointed at the Sun. It produces a diffraction limited image without instrumental polarization and with a spectral resolution of 46,000 in a field of 6 arc min. diameter. The instrument is calibrated for absolute Doppler velocity measurements and is presently used for quantitative imagery of the radial velocity motions in the photosphere. The short period oscillations are recorded. Work of adapting the instrument for the imagery of the solar surface in the Stokes parameters is discussed. The first polarizer of the birefringent filter, with a reference position angle 0 deg, is associated with a fixed quarter wave plate at +45 deg. A rotating quarter wave plate is set at 0 deg and can be turned by incremented steps of exactly +45 deg. Another quarter wave plate also initially set at 0 deg is simultaneously incremented by -45 deg but only on each even step of the first plate. A complete cycle of increments produces images for each of the 6 parameters I + or - Q, I + or - U and I + or - V. These images are then subtracted by pairs to produce a full image in the three Stokes parameters Q, U and V. With proper retardation tolerance and positioning accuracy of the quarter wave plates, the cross talk between the Stokes parameters was calculated and checked to be minimal.

Dollfus, A.↗

NASA NTRS1985

Doppler parameter estimation for spaceborne synthetic-aperture radars

Problems in the determination of Doppler parameters for spaceborne synthetic-aperture radar (SAR) data processing are examined. The degradations in image quality due to errors in these parameters are summarized. It is shown that these parameters can be estimated using accurate spacecraft ancillary data. In cases where such data are not available, two techniques are proposed to estimate these parameters using the coherent radar return. These techniques were tested with the Seasat SAR data and the test results demonstrate that the accuracies achieved exceed the system performance requirements. Possible applications of these techniques in other areas of SAR data utilization are briefly discussed.

Li, F.-K.↗

NASA NTRS1986

Effects of wing modification on an aircraft's aerodynamic parameters as determined from flight data

A study of the effects of four wing-leading-edge modifications on a general aviation aircraft's stability and control parameters is presented. Flight data from the basic aircraft configuration and configurations with wing modifications are analyzed to determine each wing geometry's stability and control parameters. The parameter estimates and aerodynamic model forms are obtained using the stepwise regression and maximum likelihood techniques. The resulting parameter estimates and aerodynamic models are verified using vortex-lattice theory and by analysis of each model's ability to predict aircraft behavior. Comparisons of the stability and control derivative estimates from the basic wing and the four leading-edge modifications are accomplished so that the effects of each modification on aircraft stability and control derivatives can be determined.

Hess, R. A.↗

NASA NTRS1985

Evaluation and interpretation of Thematic Mapper ratios in equations for estimating corn growth parameters

Reflectance and agronomic Thematic Mapper (TM) data were analyzed to determine possible data transformations for evaluating several plant parameters of corn. Three transformation forms were used: the ratio of two TM bands, logarithms of two-band ratios, and normalized differences of two bands. Normalized differences and logarithms of two-band ratios responsed similarly in the equations for estimating the plant growth parameters evaluated in this study. Two-term equations were required to obtain the maximum predictability of percent ground cover, canopy moisture content, and total wet phytomass. Standard error of estimate values were 15-26 percent lower for two-term estimates of these parameters than for one-term estimates. The terms log(TM4/TM2) and (TM4/TM5) produced the maximum predictability for leaf area and dry green leaf weight, respectively. The middle infrared bands TM5 and TM7 are essential for maximizing predictability for all measured plant parameters except leaf area index. The estimating models were evaluated over bare soil to discriminate between equations which are statistically similar. Qualitative interpretations of the resulting prediction equations are consistent with general agronomic and remote sensing theory.

Dardner, B. R.↗

NASA NTRS1985

Interdependence of parameters important to the design of subsonic canard-configured aircraft

An analysis is made of the interrelationship of the longitudinal parameters important to the aerodynamic design of an efficient canard or tandem wing configuration. It is shown that theoretical configuration span efficiencies substantially greater than one are feasible with the proper choice of parameters. This improvement can translate into significantly increased lift/drag ratios assuming fixed spans. The Prandtl-Munk relationship for induced drag is used as a convenient qualitative guide, with stability and trim criteria superimposed. An 'aspect-ratio ratio' parameter is introduced to aid in optimizing a configuration longitudinally. It is shown that a canard/wing 'aspect-ratio ratio' of approximately 3/2 to 2 is necessary to achieve peak span efficiency for a given span ratio and gap, assuming representative parameters.

Feistel, T. W.↗

NASA NTRS1986

Measurement of carrier transport and recombination parameter in heavily doped silicon

The minority carrier transport and recombination parameters in heavily doped bulk silicon were measured. Both Si:P and Si:B with bulk dopings from 10 to the 17th and 10 to the 20th power/cu cm were studied. It is shown that three parameters characterize transport in bulk heavily doped Si: the minority carrier lifetime tau, the minority carrier mobility mu, and the equilibrium minority carrier density of n sub 0 and p sub 0 (in p-type and n-type Si respectively.) However, dc current-voltage measurements can never measure all three of these parameters, and some ac or time-transient experiment is required to obtain the values of these parameters as a function of dopant density. Using both dc electrical measurements on bipolar transitors with heavily doped base regions and transients optical measurements on heavily doped bulk and epitaxially grown samples, lifetime, mobility, and bandgap narrowing were measured as a function of both p and n type dopant densities. Best fits of minority carrier mobility, bandgap narrowing and lifetime as a function of doping density (in the heavily doped range) were constructed to allow accurate modeling of minority carrier transport in heavily doped Si.

Swanson, Richard M.↗

NASA NTRS1986

Parameter estimation and error analysis in environmental modeling and computation

A method for the estimation of parameters and error analysis in the development of nonlinear modeling for environmental impact assessment studies is presented. The modular computer program can interactively fit different nonlinear models to the same set of data, dynamically changing the error structure associated with observed values. Parameter estimation techniques and sequential estimation algorithms employed in parameter identification and model selection are first discussed. Then, least-square parameter estimation procedures are formulated, utilizing differential or integrated equations, and are used to define a model for association of error with experimentally observed data.

Kalmaz, E. E.↗

NASA NTRS1987

Point source solutions and coupling parameters in cratering mechanics

The use of a point source of an impactor energy and momentum to replace the effects of the impactor is examined. The general framework and notation of the impact cratering problems are described; it is determined that the cratering phenomena are governed by Froude, Cauchy, and Reynolds numbers. The coupling parameter concept is defined mathematically as the measure that governs limit point source solutions. Examples of cases where coupling parameters are used are presented. The relationships of the coupling parameter concept with steady flow and the Z-model of cratering of Maxwell (1973, 1977) are studied. Crater size, ejecta distributions, growth histories, time of formation, melt volume, and shock decay for various scale factors for impact cratering mechanics are calculated, and the applicability of the coupling parameter to the study of cratering mechanics is revealed.

Holsapple, K. A.↗

NASA NTRS1987

Efficient computation of parameter confidence intervals

An important step in system identification of aircraft is the estimation of stability and control derivatives from flight data along with an assessment of parameter accuracy. When the maximum likelihood estimation technique is used, parameter accuracy is commonly assessed by the Cramer-Rao lower bound. It is known, however, that in some cases the lower bound can be substantially different from the parameter variance. Under these circumstances the Cramer-Rao bounds may be misleading as an accuracy measure. This paper discusses the confidence interval estimation problem based on likelihood ratios, which offers a more general estimate of the error bounds. Four approaches are considered for computing confidence intervals of maximum likelihood parameter estimates. Each approach is applied to real flight data and compared.

Murphy, Patrick C.↗

NASA NTRS1988

Lateral and longitudinal stability and control parameters for the space shuttle discovery as determined from flight test data

The Discovery vehicle was found to have longitudinal and lateral aerodynamic characteristics similar to those of the Columbia and Challenger vehicles. The values of the lateral and longitudinal parameters are compared with the preflight data book. The lateral parameters showed the same trends as the data book. With the exception of C sub l sub Beta for Mach numbers greater than 15, C sub n sub delta r for Mach numbers greater than 2 and for Mach numbers less than 1.5, where the variation boundaries were not well defined, ninety percent of the extracted values of the lateral parameters fell within the predicted variations. The longitudinal parameters showed more scatter, but scattered about the preflight predictions. With the exception of the Mach 1.5 to .5 region of the flight envelope, the preflight predictions seem a reasonable representation of the Shuttle aerodynamics. The models determined accounted for ninety percent of the actual flight time histories.

Suit, William T.↗

NASA NTRS1988

Parameter identification methods for improving structural dynamic models

There is an increasing need to develop Parameter Identification methods for improving structural dynamic models, based on the inability of engineers to produce mathematical models which correlate with experimental data. This research explores the efficiency of combining Component Mode Synthesis (substructuring) methods with Parameter Identification procedures in order to improve analytical modeling of structural components and their connections. Improvements are computed in terms of physical stiffness and damping parameters in order that the physical characteristics of the model can be better understood. Connections involving both viscous and friction damping are investigated. Substructuring methods are utilized to reduce the complexity of the identification problem. Component and inter-component structural connection properties are evaluated and identified independently, thus simplifying the identification problem. It is shown that modal test data is effective for identifying modeling problems associated with structural components, and for determining the stiffness and damping properties of intercomponent connections. In general, Parameter Identification is improved when greater quantities of experimental data are available.

Lawrence, Charles↗

NASA NTRS1988

Cosmological parameters and evolution of the galaxy luminosity function

The relationship between the observed distribution of discrete sources of a flux limited sample, the luminosity function of these sources, and the cosmological model is discussed. It is stressed that some assumptions about the form and evolution of the luminosity function must be made in order to determine the cosmological parameters from the observed distribution of sources. Presented is a method to test the validity of these assumptions using the observations. It is shown how, using higher moments of the observed distribution, one can determine, independently of the cosmological model, all parameters of the luminosity function except those describing evolution of the density and the luminosity of the luminosity function. These methods are applied to the sample of approximately 1000 galaxies recently used by Loh and Spillar to determine a value of the cosmological density parameter Omega approx = 1. It is shown that the assumptions made by Loh and Spillar about the luminosity function are inconsistent with the data, and that a self-consistent treatment of the data indicates a lower value of Omega approx = 0.2 and a flatter luminosity function. It should be noted, however, that incompleteness in the sample could cause a flattening of the luminosity function and lower the calculated value of Omega and that uncertainty in the values of these parameters due to random fluctuations is large.

Caditz, David↗

NASA NTRS1988

Parameter identification using modal data

Parameter identification using experimental modal data is examined. The following approaches are discussed: (1) Direct - using actual sensor measurements to obtain parameters (e.g., ERA, ITD); and (2) Indirect - identifies parameters using measured modal data. In this work, only the natural frequencies are used to identify physical parameters.

Meirovitch, L.↗

NASA NTRS1989

An investigation of using an RQP based method to calculate parameter sensitivity derivatives

Estimation of the sensitivity of problem functions with respect to problem variables forms the basis for many of our modern day algorithms for engineering optimization. The most common application of problem sensitivities has been in the calculation of objective function and constraint partial derivatives for determining search directions and optimality conditions. A second form of sensitivity analysis, parameter sensitivity, has also become an important topic in recent years. By parameter sensitivity, researchers refer to the estimation of changes in the modeling functions and current design point due to small changes in the fixed parameters of the formulation. Methods for calculating these derivatives have been proposed by several authors (Armacost and Fiacco 1974, Sobieski et al 1981, Schmit and Chang 1984, and Vanderplaats and Yoshida 1985). Two drawbacks to estimating parameter sensitivities by current methods have been: (1) the need for second order information about the Lagrangian at the current point, and (2) the estimates assume no change in the active set of constraints. The first of these two problems is addressed here and a new algorithm is proposed that does not require explicit calculation of second order information.

Beltracchi, Todd J.↗