Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Comparison of ice-phase microphysical parameterization schemes using numerical simulations of tropical convection

The performance of several ice parameterizations has been evaluated through a numerical cloud model. Ice effects using different schemes are contrasted with each other and with an ice-free control by incorporating them into the cloud model and by applying them to simulations of tropical squall systems. The latter are simulated in 2D so that a large domain can be used to incorporate a complete anvil. Nonsquall-type convective lines are simulated in 3D owing to their smaller horizontal scale. It is concluded that inclusion of ice microphysics in the cloud model enhanced the agreement of the simulated convection with some features of observed convection, including the proportion of surface rainfall in the anvil region and the intensity and structure of the radar brightband near the melting level in the anvil. In the experiments with bulk microphysics, three ice categories produced much better results than two ice categories, which in turn was better than no ice. For the tropical squall-type and nonsquall-type systems the optimal mix was ice, snow, and graupel.

Mccumber, Michael↗
NASA NTRS1991

Contributions to the implementation of the Arakawa-Schubert cumulus parameterization in the GLA GCM

The roles of the Critical Cloud Work Function (CCWF) data set and the upper and lower bounds on entrainment by cumulus plumes in the Arakawa-Schubert cumulus parameterization (ASCP) in the GLA GCM (Geller et al., 1988) were investigated in two sets of experiments. It was found that the horizontal and vertical distribution of cumulus heating can be altered in ASCP by adjusting these parameters. These changes can have a strong influence on the vertical structure of condensation heating, water vapor distribution, temperature, and rainfall. The CCWF is an important limiting parameter that controls the onset of different cloud types; increasing the threshold values of CCWF for all clouds tends to concentrate the rainfall into a narrower ITCZ and affects the rainfall during the initial adjustment period.

Sud, Y. C.↗
NASA NTRS1990

A parameterization of radiation heating at the surface in a numerical cloud model

The development of the parameterized radiation heat flux incorporated in a 2D time-dependent model that was tested for its predictive capabilities during the COHMEX project in 1986 is described, together with two experiments for using the model in the predictive mode. Using the 12 Z sounding during the North Dakota Thunderstorm Project in 1989, it was found that the COHMEX model was quite successful in simulating the convection and predicting the cloud characteristics.

Kopp, Fred J.↗
NASA NTRS1992

Role of a cumulus parameterization scheme in simulating atmospheric circulation and rainfall in the nine-layer Goddard Laboratory for Atmospheres General Circulation Model

The influence of a cumulus convection scheme on the simulated atmospheric circulation and hydrologic cycle is investigated by means of a coarse version of the GCM. Two sets of integrations, each containing an ensemble of three summer simulations, were produced. The ensemble sets of control and experiment simulations are compared and differentially analyzed to determine the influence of a cumulus convection scheme on the simulated circulation and hydrologic cycle. The results show that cumulus parameterization has a very significant influence on the simulation circulation and precipitation. The upper-level condensation heating over the ITCZ is much smaller for the experiment simulations as compared to the control simulations; correspondingly, the Hadley and Walker cells for the control simulations are also weaker and are accompanied by a weaker Ferrel cell in the Southern Hemisphere. Overall, the difference fields show that experiment simulations (without cumulus convection) produce a cooler and less energetic atmosphere.

Sud, Y. C.↗
NASA NTRS1992

Reflectance of broken cloud fields - Simulation and parameterization

The transfer of solar irradiance in plane parallel and broken cloud fields is simulated using a Monte Carlo method. The angular distribution pattern of radiances exiting the cloud layer is studied with varying cloud geometries, optical thicknesses, cloudiness, and solar zenith angles. A rather large anisotropy of the reflected flux is found, usually increasing with solar zenith angle and with patterns that strongly depend on cloud geometry. The main features are (1) a local maximum of reflected intensity in the forward direction for all cases, (2) a limb darkening for the plane parallel case, and (3) a limb brightening and a local maximum of reflected intensity in the backward direction for broken clouds. A parameterization for the azimuth-average reflectance function is developed. It reproduces the Monte Carlo simulation with a reasonable accuracy and illustrates that, when azimuthally averaged, the reflectance function is dominated by side viewing and intercloud shadowing effects.

Breon, Francois-Marie↗
NASA NTRS1992

Parameterization of solar cells

The aggregation (sorting) of the individual solar cells into an array is commonly based on a single operating point on the current-voltage (I-V) characteristic curve. An alternative approach for cell performance prediction and cell screening is provided by modeling the cell using an equivalent electrical circuit, in which the parameters involved are related to the physical phenomena in the device. These analytical models may be represented by a double exponential I-V characteristic with seven parameters, by a double exponential model with five parameters, or by a single exponential equation with four or five parameters. In this article we address issues concerning methodologies for the determination of solar cell parameters based on measured data points of the I-V characteristic, and introduce a procedure for screening of solar cells for arrays. We show that common curve fitting techniques, e.g., least squares, may produce many combinations of parameter values while maintaining a good fit between the fitted and measured I-V characteristics of the cell. Therefore, techniques relying on curve fitting criteria alone cannot be directly used for cell parameterization. We propose a consistent procedure which takes into account the entire set of parameter values for a batch of cells. This procedure is based on a definition of a mean cell representing the batch, and takes into account the relative contribution of each parameter to the overall goodness of fit. The procedure is demonstrated on a batch of 50 silicon cells for Space Station Freedom.

Appelbaum, J.↗
NASA NTRS1992

A parameterization for longwave surface radiation from satellite data - Recent improvements

Several improvements have been made recently to the parameterization for surface longwave radiation described by Gupta (1989). Model constants have been modified in order to use meteorological data from the International Satellite Cloud Climatology Project instead of from the TIROS Operational Vertical Sounder data, primarily to take advantage of the vastly superior cloud information available from the former. Additional modifications were made to improve the estimation of cloud effect in the presence of low-level clouds. The latter modifications reduced the systematic error of the overcast-sky fluxes from 10.0 to 1.7 W/sq m and the random error from +/- 18.9 to +/- 6.3 W/sq m when compared to the fluxes computed with a detailed radiative transfer model.

Gupta, Shashi K.↗
NASA NTRS1993

Mountain-wave drag in the stratosphere and mesosphere inferred from observed winds and a simple mountain-wave parameterization scheme

A daily analysis of mountain-wave propagation through observed, global wind, and temperature fields in January and August is presented. Winds and temperatures are obtained from the daily 18-level NMC Climate Analysis Center. Mountain-wave properties are deduced from a simple, gravity wave parameterization scheme in which the effects of topographic anisotropy (ridge orientation) are explicitly included. Planetary waves in the northern winter stratosphere are found to play an important role in modulating the magnitude and distribution of inferred mountain-wave drag in the middle atmosphere. The Aleutian anticyclone is found to effectively block mountain waves generated over western North America from reaching the mesosphere by inducing local mountain-wave-critical levels in the stratosphere. Stratospheric sudden warmings have a similar effect at all longitudes so that during months with sudden warmings the average inferred drag in the mesosphere is reduced by a factor of 4 to 5 from its normal value. Partly as a consequence of larger planetary-wave filtering in the Northern Hemisphere, inferred mountain-wave drag in the southern winter mesosphere is found to be comparable to that in the northern winter mesosphere. Almost all of the mountain wave drag exerted on the southern middle atmosphere is found to originate over the southern Andes and Antarctic Peninsula.

Bacmeister, Julio T.↗
NASA NTRS1993

Construction and parameterization of all static and dynamic H2-optimal state feedback solutions, optimal fixed modes, and fixed decoupling zeros

This paper considers an H2 optimization problem via state feedback. The class of problems dealt with here are general singular type which have a left invertible transfer matrix function from the control input to the controlled output. This class subsumes the regular H2 optimization problems. The paper constructs and parameterizes all the static and dynamic H2 optimal state feedback solutions. Moreover, all the eigenvalues of an optimal closed-loop system are characterized. All optimal closed-loop systems share a set of eigenvalues which are termed here as the optimal fixed modes. Every H2 optimal controller must assign among the closed-loop eigenvalues the set of optimal fixed modes. This set of optimal fixed modes includes a set of optimal fixed decoupling zeros which shows the minimum absolutely necessary number and locations of pole-zero cancellations present in any H2 optimal design. It is shown that both the sets of optimal fixed modes and optimal fixed decoupling zeros do not vary depending upon whether the static or the dynamic controllers are used.

Chen, Ben M.↗
NASA NTRS1993

Parameterization of surface heat fluxes above forest with satellite thermal sensing and boundary-layer soundings

The paper is concerned with the feasibility of determining the surface flux of sensible heat from forest using surface temperatures measured by a satellite together with soundings of temperature aloft in the unstable atmospheric boundary layer. Consideration is also given to the effect of the spatial scale of the surface temperature measurement on the parameterization by means of the scalar roughness. The latent heat flux is derived from the sensible heat flux by means of the energy budget. The data used in the study have been obtained during the HAPEX-MOBILHY experiment of 1986. The approach is based on turbulence similarity for the unstable atmospheric boundary layer.

Brutsaert, Wilfried↗
NASA NTRS1992

Search for subgrid scale parameterization by projection pursuit regression

The dependence of subgrid-scale stresses on variables of the resolved field is studied using direct numerical simulations of isotropic turbulence, homogeneous shear flow, and channel flow. The projection pursuit algorithm, a promising new regression tool for high-dimensional data, is used to systematically search through a large collection of resolved variables, such as components of the strain rate, vorticity, velocity gradients at neighboring grid points, etc. For the case of isotropic turbulence, the search algorithm recovers the linear dependence on the rate of strain (which is necessary to transfer energy to subgrid scales) but is unable to determine any other more complex relationship. For shear flows, however, new systematic relations beyond eddy viscosity are found. For the homogeneous shear flow, the results suggest that products of the mean rotation rate tensor with both the fluctuating strain rate and fluctuating rotation rate tensors are important quantities in parameterizing the subgrid-scale stresses. A model incorporating these terms is proposed. When evaluated with direct numerical simulation data, this model significantly increases the correlation between the modeled and exact stresses, as compared with the Smagorinsky model. In the case of channel flow, the stresses are found to correlate with products of the fluctuating strain and rotation rate tensors. The mean rates of rotation or strain do not appear to be important in this case, and the model determined for homogeneous shear flow does not perform well when tested with channel flow data. Many questions remain about the physical mechanisms underlying these findings, about possible Reynolds number dependence, and, given the low level of correlations, about their impact on modeling. Nevertheless, demonstration of the existence of causal relations between sgs stresses and large-scale characteristics of turbulent shear flows, in addition to those necessary for energy transfer, provides important insight into the relation between scales in turbulent flows.

Meneveau, C.↗
NASA NTRS1993

Research into the influence of spatial variability and scale on the parameterization of hydrological processes

The objectives of the research were as follows: (1) Extend the Representative Elementary Area (RE) concept, first proposed and developed in Wood et al, (1988), to the water balance fluxes of the interstorm period (redistribution, evapotranspiration and baseflow) necessary for the analysis of long-term water balance processes. (2) Derive spatially averaged water balance model equations for spatially variable soil, topography and vegetation, over A RANGE OF CLIMATES. This is a necessary step in our goal to derive consistent hydrologic results up to GCM grid scales necessary for global climate modeling. (3) Apply the above macroscale water balance equations with remotely sensed data and begin to explore the feasibility of parameterizing the water balance constitutive equations at GCM grid scale.

Wood, Eric F.↗
NASA NTRS1993

Session on cumulus parameterization

The session on cumulus parameterization from the Colloquium and Workshop on Multiscale Coupled Modeling is covered. The ten major issues raised that were suggested to be critical unknowns requiring immediate attention are presented.

Frank, Bill↗
NASA NTRS1995

Improvements of an ice-phase microphysics parameterization for use in numerical simulations of tropical convection

It is important to properly simulate the extent and ice water content of tropical anvil clouds in numerical models that explicitly include cloud formation because of the significant effects that these clouds have on the radiation budget. For this reason, a commonly used bulk ice-phase microphysics parameterization was modified to more realistically simulate some of the microphysical processes that occur in tropical anvil clouds. Cloud ice growth by the Bergeron process and the associated formation of snow were revised. The characteristics of graupel were also modified in accord with a previous study. Numerical simulations of a tropical squall line demonstrate that the amount of cloud ice and the extent of anvil clouds are increased to more realistic values by the first two changes.

Krueger, Steven K.↗
NASA NTRS1995

Modeling and parameterization of horizontally inhomogeneous cloud radiative properties

One of the fundamental difficulties in modeling cloud fields is the large variability of cloud optical properties (liquid water content, reflectance, emissivity). The stratocumulus and cirrus clouds, under special consideration for FIRE, exhibit spatial variability on scales of 1 km or less. While it is impractical to model individual cloud elements, the research direction is to model a statistical ensembles of cloud elements with mean-cloud properties specified. The major areas of this investigation are: (1) analysis of cloud field properties; (2) intercomparison of cloud radiative model results with satellite observations; (3) radiative parameterization of cloud fields; and (4) development of improved cloud classification algorithms.

Welch, R. M.↗
NASA NTRS1995

Parameterization and scaling of arctic ice conditions in the context of ice-atmospheric processes

The goals of this project are to observe how the open water/thin ice fraction in a high-concentration ice pack responds to different short-period atmospheric forcings, and how this response is represented in different scales of observation. The objectives can be summarized as follows: determine the feasibility and accuracy of ice concentration and ice typing by ERS-1 SAR backscatter data, and whether SAR data might be used to calibrate concentration estimates from optical and massive-microwave sensors; investigate methods to integrate SAR data with other satellite data for turbulent heat flux parameterization at the ocean/atmosphere interface; determine how the development and evolution of open water/thin ice areas within the interior ice pack vary under different atmospheric synoptic regimes; compare how open-water/thin ice fractions estimated from large-area divergence measurements differ from fractions determined by summing localized openings in the pack; relate these questions of scale and process to methods of observation, modeling, and averaging over time and space.

Barry, R. G.↗
NASA NTRS1995

Evaluating and Understanding Parameterized Convective Processes and Their Role in the Development of Mesoscale Precipitation Systems

Research efforts during the first year focused on numerical simulations of two convective systems with the Penn State/NCAR mesoscale model. The first of these systems was tropical cyclone Irma, which occurred in 1987 in Australia's Gulf of Carpentaria during the AMEX field program. Comparison simulations of this system were done with two different convective parameterization schemes (CPS's), the Kain-Fritsch (1993 - KF) and the Betts-Miller (Betts 1986- BM) schemes. The second system was the June 10-11 1985 squall line simulation, which occurred over the Kansas-Oklahoma region during the PRE-STORM experiment. Simulations of this system using the KF scheme were examined in detail.

Fritsch, J. Michael↗
NASA NTRS1996

Evaluating and Understanding Parameterized Convective Processes and Their Role in the Development of Mesoscale Precipitation Systems

Research efforts focused on numerical simulations of two convective systems with the Penn State/NCAR mesoscale model. The first of these systems was tropical cyclone Irma, which occurred in 1987 in Australia's Gulf of Carpentaria during the AMEX field program. Comparison simulations of this system were done with two different convective parameterization schemes (CPS's), the Kain-Fritsch (KF) and the Betts-Miller (BM) schemes. The second system was the June 10-11, 1985 squall line simulation, which occurred over the Kansas-Oklahoma region during the PRE-STORM experiment. Simulations of this system using the KF scheme were examined in detail.

Fritsch, J. Michael↗