Search NASA⌕ Search

SEARCH · Search NASA

Results for “polaritons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Hybrid Plasmonic Coupled‐Mode Metasurface Design for Shot‐Noise Limited Ppb‐Level Hydrogen Detection

Plasmonic hydrogen sensors have enabled hydrogen detection below parts-per-million (ppm) range by boosting the sensitivity using localized surface plasmonic resonant (LSPR) structures. However, the intrinsic optical losses of Palladium (Pd), the primary plasmonic metal used for hydrogen detection, result in a low quality (Q) factor LSPR, which fundamentally hinders further improvement. In this work, a hybrid plasmonic metasurface is proposed that couples Pd-based LSPR structure with an Au film supporting surface plasmon polariton mode (Au-SPP). The coupled near-perfect absorber resonance yields a spectrally narrow, high Q response that retains strong sensitivity to hydrogen while improving resonance localization. Numerical analysis shows that, under shot-noise-limited conditions, the limit of detection (LoD) can be improved by over threefold compared to the state-of-the-art designs. Furthermore, this hybrid plasmonic coupled-mode metasurface thus presents a promising pathway to achieve parts-per-billion-level (ppb-level) hydrogen detection with enhanced spectral precision and robustness.

coupled modes↗

Temperature-dependent optical constants of vanadium dioxide thin films deposited on polar dielectrics

Coating polar dielectrics with thin film vanadium dioxide (VO 2 ) enables one to exploit the temperature-dependent phase transition within VO 2 to actively tune and modulate surface phonon polaritons at mid-infrared. However, controlling the behavior of such systems requires intimate knowledge of the temperature-dependent optical constants of VO 2 , which depend greatly on the growth conditions and substrate material. Here, in this work, we accurately determine the complex optical constants of VO 2 on polar dielectrics across the insulator-to-metal phase transition (IMT) using only normal incident reflectance spectra by analyzing the reflectance with Kramers–Kronig relations and thin film Fresnel equations. This non-ellipsometry technique offers an advantage in determining the refractive index using a standard infrared spectrometer.

36 MATERIALS SCIENCE↗

Magnetic field driven emergent phenomena: Insights from magneto-optics and nanoscopy

This review explores magnetic field-driven emergent phenomena across various material systems, emphasizing the pivotal roles of magneto-optical and nanoscopy techniques. We examine fundamental aspects of Landau electrodynamics in both 2D and 3D systems, including quantum Hall and topological magnetoelectric effects in graphene and topological insulators. Particularly attention is given to magnetic excitations and magnetopolaritons, such as surface magnon polaritons, magnetoplasmons, and magnetoexcitons in novel quantum materials, including quantum magnets and hybrid heterostructures. Advanced imaging techniques, such as scattering-type scanning near-field optical microscopy (SNOM) and microwave impedance microscopy, are showcased for their capability to resolve these phenomena with microscopic and nanoscopic resolution. These insights are complemented by discussions of advanced experimental approaches, including cryogenic environments, ultrafast pump-probe techniques, and the integration of magnetic fields into near-field optical methodologies. We further investigate the potential of these imaging techniques for unraveling complex magnetic orders, quantum phases, and correlated electronic behaviors. Finally, we offer perspectives on future research directions and highlight emerging opportunities in the evolving field of optical magneto-nanoscopy.

36 MATERIALS SCIENCE↗

Synchrotron infrared nano-spectroscopy and -imaging

Infrared (IR) spectroscopy has evolved into a powerful analytical technique to probe molecular and lattice vibrations, low-energy electronic excitations and correlations, and related collective surface plasmon, phonon, or other polaritonic resonances. In combination with scanning probe microscopy, near-field infrared nano-spectroscopy and -imaging techniques have recently emerged as a frontier in imaging science, enabling the study of complex heterogeneous materials with simultaneous nanoscale spatial resolution and chemical and quantum state spectroscopic specificity. Here, we describe synchrotron infrared nano-spectroscopy (SINS), which takes advantage of the low-noise, broadband, high spectral irradiance, and coherence of synchrotron infrared radiation for near-field infrared measurements across the mid- to far-infrared with nanometer spatial resolution. This powerful combination provides a qualitatively new form of broadband spatio-spectral analysis of nanoscale, mesoscale, and surface phenomena that were previously difficult to study with IR techniques, or even any form of micro-spectroscopy in general. We review the development of SINS, describe its technical implementations, and highlight selected examples representative of the rapidly growing range of applications in physics, chemistry, biology, materials science, geology, and atmospheric and space sciences.

47 OTHER INSTRUMENTATION↗

Tunability and Long-Range Enhancement of Resonance Energy Transfer Facilitated by Plasmonic Nanorods

Resonance energy transfer (RET) between molecules or quantum dots is an important process in many energy-related applications. Different environmental structures have been studied and demonstrated to be able to enhance the RET rates between a nearby donor–acceptor pair. In particular, cylindrical silver nanorods and nanowires have shown an extraordinary ability to transfer energy along their longitudinal axes over large distances. However, the detailed mechanism of such transfer and the effects on the molecular RET process are as yet elusive. In this study, we use the recently developed computational tool based on the plasmon-coupled RET method to systematically study the effects of nanorods with different dimensions on the RET rates. We find that highly frequency-dependent coupling factor (CF) spectra, whose amplitudes determine RET rates, can be obtained due to the localized surface plasmon polariton modes of the rods with nanoscale dimensions. Simple phenomenological models can be derived for the wavelengths of CF peaks in relation to the length and width of the nanorods, providing easy tunability for enhancing the RET rate in specific wavelength ranges. When coupled to longer rods with mesoscale lengths, exponential decay of the CF over long donor–acceptor distances with a small decay constant is observed, leading to the possibility of long-range RET processes. Furthermore, drumhead resonance modes emerge on the flat ends of the rod when the rod’s diameter reaches 300 nm, resulting in extra enhancement to RET rate compared to certain thinner rods. Furthermore, these findings shed new light on the mechanism of plasmonic enhancement with silver nanorods and establish design principles for how to optimally utilize these structures to manipulate RET processes for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast Dynamics of Plasmon-Coupled Excitons in Semiconducting Nanoplatelets

Exciton-plasmon coupling in nanomaterials produces many relevant phenomena for photonics applications including increased light-matter interactions, enhanced radiative rates of quantum emitters, and coherent energy exchange. In the case of exciton coupling to surface plasmon polaritons (SPPs), dispersive interactions controlled by the wavevector of optical excitation create the opportunity for tunable optical emission. Strong temporal impacts on exciton lifetimes can also occur in coupled systems, creating the opportunity for ultrafast control of exciton lifetime via changes in electronic coupling magnitude to a dispersive SPP. The coupling strength can be impacted by the morphology of the nanomaterials. Here, in this study, we utilize colloidal semiconductor nanoplatelets deposited onto thin silver plasmonic films, and compare the results to semiconductor quantum dots deposited on the silver films. We map the dispersion of the coupled systems and measure the ultrafast transient absorption response of the coupled systems. Due to the larger interaction areas of the nanoplatelets that lie flat on the silver films, a greater degree of coupling is found for the nanoplatelets, and much faster temporal responses are found as compared to quantum dots. Fresnel theory calculations that incorporate heavy and light hole features can reproduce the dispersion of the nanoplatelet-silver film, and a simple three-state model is developed to provide insights into the nature of the coupling at different photon energies along the dispersion curve.

colloidal semiconductor nanoplatelets↗

Role of Local Conductivities in the Plasmon Reflections at the Edges and Stacking Domain Boundaries of Trilayer Graphene

Here, we employed infrared scattering-type scanning near-field optical microscopy (IR-sSNOM) to study surface plasmon polaritons (SPPs) in trilayer graphene (TLG). Our study reveals systematic differences in near-field IR spectra and SPP wavelengths between Bernal (ABA) and rhombohedral (ABC) TLG domains on SiO 2 , which can be explained by stacking-dependent intraband conductivities. We also observed that the SPP reflection profiles at ABA-ABC boundaries could be mostly accounted for by an idealized domain boundary defined by the conductivity discontinuity. However, we identified distinct shapes in the SPP profiles at the edges of the ABA and ABC TLG, which cannot be solely attributed to idealized edges with stacking-dependent conductivities. Instead, this can be explained by the presence of various edge structures with local conductivities differing from those of bulk TLGs. Our findings unveil a new structural element that can control SPP and provide insights into the structures and electronic states of the edges of few-layer graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasmons Enable Ultralow Threshold Solid-State Triplet Fusion Upconversion with a 2D Sensitizer

Solid-state triplet−triplet annihilation (TTA) upconversion has significant potential for application in light harvesting, optoelectronic devices, and bioimaging. However, the high optical powers required to achieve efficient upconversion have inhibited its adoption. In this work, we demonstrate plasmon-enhanced near-infrared (NIR)-to-blue TTA upconversion in a monolayer WSe2/organic heterojunction. Under far-field excitation, the device reaches a threshold of 19 mW/cm 2 and an external quantum efficiency (EQE) of 0.17% with an anti-Stokes shift of 1.1 eV. Plasmon excitation lowers the threshold to 0.9 mW/cm 2 and improves the EQE to 3.6%. We attribute the plasmon enhancement to surface plasmon polariton (SPP) near-field enhancement and dark-exciton absorption. Optimization of the WSe 2 transfer process is identified as a key factor for the device performance. This work demonstrates that plasmon excitation overcomes the low far-field absorption of 2D transition-metal dichalcogenide (TMD) sensitizers. Consequently, monolayer TMDs can achieve solid-state upconversion with a performance among the best reported.

2D materials↗

Comparison of Metal Adhesion Layers for Au Films in Thermoplasmonic Applications

If thermoplasmonic applications such as heat-assisted magnetic recording are to be commercially viable, it is necessary to optimize both thermal stability and plasmonic performance of the devices involved. In this work, a variety of different adhesion layers were investigated for their ability to reduce dewetting of sputtered 50 nm Au films on SiO 2 substrates. Traditional adhesion layer metals Ti and Cr were compared with alternative materials of Al, Ta, and W. Film dewetting was shown to increase when the adhesion material diffuses through the Au layer. An adhesion layer thickness of 0.5 nm resulted in superior thermomechanical stability for all adhesion metals, with an enhancement factor of up to 200X over 5 nm thick analogues. The metals were ranked by their effectiveness in inhibiting dewetting, starting with the most effective, in the order Ta > Ti > W > Cr > AI. Finally, the Au surface-plasmon polariton response was compared for each adhesion layer, and it was found that 0.5 nm adhesion layers produced the best response, with W being the optimal adhesion layer material for plasmonic performance.

36 MATERIALS SCIENCE↗

Low-Loss Charge Transfer Plasmons in Graphene/α-RuCl 3 Heterostructures Below 40 K

Charge transfer at material interfaces governs a wide range of physical properties, from electronic band structures to emergent collective excitations. In two-dimensional (2D) material heterostructures, charge transfer phenomena play important roles in enabling novel quantum phases, proximity effects, and tunable plasmonic responses. One representative charge transfer interface is formed between α-RuCl 3 , a van der Waals material with high electron affinity, and graphene. Significant charge transfer across this interface induces the formation of charge-transfer plasmon polaritons (CPPs), hybrid excitations between light and charge oscillations. However, previous studies found that as the charge transfer process takes place, α-RuCl 3 becomes lossy, which limits the quality factor of CPPs. Here, we investigate CPPs down to 10 K using a home-built scattering-type scanning near-field optical microscope (s-SNOM) optimized for low-temperature measurements. Our study reveals a dramatic suppression of plasmon loss channels below 40 K, contributing to a significant enhancement in the plasmonic quality factor. This reduction in loss is likely attributed to the blue shift of the correlation-induced Mott gap in α-RuCl 3 with decreasing temperature, along with the reduction of phonon scattering at low temperature. In conclusion, our results highlight the potential of using s-SNOM and CPPs to study complex 2D interfaces and reveal correlated electron dynamics in the underlying material.

36 MATERIALS SCIENCE↗

Enhancement of van der Waals Interlayer Coupling through Polar Janus MoSSe

Interlayer coupling plays essential roles in the quantum transport, polaritonic, and electrochemical properties of stacked van der Waals (vdW) materials. In this work, we report the unconventional interlayer coupling in vdW heterostructures (HSs) by utilizing an emerging 2D material, Janus transition metal dichalcogenides (TMDs). In contrast to conventional TMDs, monolayer Janus TMDs have two different chalcogen layers sandwiching the transition metal and thus exhibit broken mirror symmetry and an intrinsic vertical dipole moment. Such a broken symmetry is found to strongly enhance the vdW interlayer coupling by as much as 13.2% when forming MoSSe/MoS 2 HS as compared to the pristine MoS 2 counterparts. Our noncontact ultralow-frequency Raman probe, linear chain model, and density functional theory calculations confirm the enhancement and reveal the origins as charge redistribution in Janus MoSSe and reduced interlayer distance. Furthermore, our results uncover the potential of tuning interlayer coupling strength through Janus heterostacking.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of Photoswitching Kinetics with Strong Light–Matter Coupling in a Cavity

Most photochemistry occurs in the regime of weak light–matter coupling, in which a molecule absorbs a photon and then performs photochemistry from its excited state. In the strong coupling regime, enhanced light–matter interactions between an optical field and multiple molecules lead to collective hybrid light–matter states called polaritons. This strong coupling leads to fundamental changes in the nature of the excited states including multi-molecule delocalized excitations, modified potential energy surfaces, and dramatically altered energy levels relative to non-coupled molecules. Here, the effect of strong light–matter coupling on covalent photochemistry has not been well explored. Photoswitches undergo reversible intramolecular photoreactions that can be readily monitored spectroscopically. In this work, we study the effect of strong light–matter coupling on the kinetics of photoswitching within optical cavities. Reproducing prior experiments, photoswitching of spiropyran/merocyanine photoswitches is decelerated in a cavity. Fulgide photoswitches, however, show the opposite effect, with strong coupling accelerating photoswitching. While modified merocyanine switching can be explained by changes in radiative decay rates or the amount of light in the cavity, modified fulgide switching kinetics suggest direct changes to excited-state reaction kinetics.

Cavities↗

Modulation of the Electronic and Vibrational Landscape in Lead Organic Chalcogenides

Metal organic chalcogenides (MOCs) are an emerging class of two-dimensional (2D) materials featuring tunable band gaps and strong light-matter interactions with great potential for optical and polaritonic applications. Lead organic chalcogenides (LOCs) stand out among MOCs for sustaining long-lived coherent optical phonons despite their distorted lattices. However, the strong electron–phonon coupling also leads to rapid charge carrier self-trapping, hindering carrier transport. Herein, we demonstrate that charge carrier self-trapping is suppressed in Se- and Te-based LOCs. Specifically, the expansive Se and Te orbitals give rise to more dispersive conduction bands and reduced electron effective masses, thereby mitigating carrier self-trapping. As a result of reduced carrier self-trapping, the Se- and Te-based LOCs exhibit enhanced band-to-band photoluminescence and improved charge transport performance. Furthermore, our results provide a synthetic route to Se- and Te-based LOC single crystals and demonstrate the potential of orbital engineering to tune their electronic and phononic properties.

Chalcogenides↗

Enhancement of THz generation in LiNbO3 waveguides via multi-bounce velocity matching

Abstract To realize the full promise of terahertz polaritonics (waveguide-based terahertz field generation, interaction, and readout) as a viable spectroscopy platform, much stronger terahertz fields are needed to enable nonlinear and even robust linear terahertz measurements. We use a novel geometric approach in which the optical pump is totally internally reflected to increase the distance over which optical rectification occurs. Velocity matching is achieved by tuning the angle of internal reflection. By doing this, we are able to enhance terahertz spectral amplitude by over 10x compared to conventional single-pass terahertz generation. An analysis of the depletion mechanisms reveals that 3-photon absorption and divergence of the pump beam are the primary limiters of further enhancement. This level of enhancement is promising for enabling routine spectroscopic measurements in an integrated fashion and is made more encouraging by the prospect of further enhancement by using longer pump wavelengths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamically tunable membrane metasurfaces for infrared spectroscopy and strong light-matter interactions

Mid-infrared spectroscopy enables biochemical sensing by identifying vibrational molecular fingerprints, but it faces limitations in instrumentation portability and analytical sensitivity. Optical metasurfaces with strong mid-infrared photonic resonances provide an attractive solution towards on-chip spectrometry and sensitive molecular detection, yet their static nature hinders their anticipated impact. Here, we introduce and demonstrate dynamically tunable silicon membrane metasurfaces exhibiting high-Q transmissive resonances in the fingerprint region. By harnessing silicon’s thermo-optical properties, we achieve continuous modulation of coupling-induced transparency (CIT) modes that emerge upon the interference of quasi-bound states in the continuum (q-BICs) and surface lattice modes (SLMs). We measure a spectral tuning rate of 0.06 cm −1 K −1 by continuously sweeping the sharp CIT resonances over a 23.5 cm −1 spectral range across a temperature range of 300–700 K. In the current proof‑of‑concept implementation, the dynamic transmission control enables non-contact chemical analysis of polymer films by detecting characteristic absorption bands of polystyrene (1450 and 1492 cm −1 ) and poly(methyl methacrylate) (1730 cm −1 ) without requiring conventional spectrometers. When analyte molecules fill the metasurface-generated photonic cavities, we demonstrate vibrational strong coupling between the poly(methyl methacrylate)’s carbonyl band and the CIT mode, manifested in a Rabi splitting of ~43 cm −1 . Our results establish a new photonic platform that unites spectral precision, strong field enhancement, and reconfigurability, offering diverse potential for compact mid-infrared spectroscopy, molecular sensing, and programmable polaritonic photonics.

74 ATOMIC AND MOLECULAR PHYSICS↗

Terahertz response of monolayer and few-layer WTe2 at the nanoscale

Abstract Tungsten ditelluride (WTe 2 ) is an atomically layered transition metal dichalcogenide whose physical properties change systematically from monolayer to bilayer and few-layer versions. In this report, we use apertureless scattering-type near-field optical microscopy operating at Terahertz (THz) frequencies and cryogenic temperatures to study the distinct THz range electromagnetic responses of mono-, bi- and trilayer WTe 2 in the same multi-terraced micro-crystal. THz nano-images of monolayer terraces uncovered weakly insulating behavior that is consistent with transport measurements. The near-field signal on bilayer regions shows moderate metallicity with negligible temperature dependence. Subdiffractional THz imaging data together with theoretical calculations involving thermally activated carriers favor the semimetal scenario with $$\Delta \approx -10\,{{{\rm{meV}}}}$$ Δ ≈ − 10 meV over the semiconductor scenario for bilayer WTe 2 . Also, we observed clear metallic behavior of the near-field signal on trilayer regions. Our data are consistent with the existence of surface plasmon polaritons in the THz range confined to trilayer terraces in our specimens. Finally, data for microcrystals up to 12 layers thick reveal how the response of a few-layer WTe 2 asymptotically approaches the bulk limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast infrared nano-imaging of far-from-equilibrium carrier and vibrational dynamics

Ultrafast infrared nano-imaging has demonstrated access to ultrafast carrier dynamics on the nanoscale in semiconductor, correlated-electron, or polaritonic materials. However, mostly limited to short-lived transient states, the contrast obtained has remained insufficient to probe important long-lived excitations, which arise from many-body interactions induced by strong perturbation among carriers, lattice phonons, or molecular vibrations. Here, we demonstrate ultrafast infrared nano-imaging based on excitation modulation and sideband detection to characterize electron and vibration dynamics with nano- to micro-second lifetimes. As an exemplary application to quantum materials, in phase-resolved ultrafast nano-imaging of the photoinduced insulator-to-metal transition in vanadium dioxide, a distinct transient nano-domain behavior is quantified. In another application to lead halide perovskites, transient vibrational nano-FTIR spatially resolves the excited-state polaron-cation coupling underlying the photovoltaic response. These examples show how heterodyne pump-probe nano-spectroscopy with low-repetition excitation extends ultrafast infrared nano-imaging to probe elementary processes in quantum and molecular materials in space and time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗