Search NASA⌕ Search

SEARCH · Search NASA

Results for “polarization switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Ferroelectric epitaxial Al(Sc/B)N/Mo/SiC heterostructures for high operating temperature devices

Advances in wurtzite nitride ferroelectrics of Al 1-x M x N (⁠ M = Sc or B) have led to novel capabilities, which must be integrated into existing fabrication processes. In the case of electronics operating > 200°C, a movement toward SiC-based platforms enables better performance over conventional Si, primarily due to the higher bandgap and lower intrinsic carrier concentration of SiC. Hence, the challenge is to develop a deposition process to integrate Al 1-x M x M x N ferroelectrics with elevated temperature-compatible materials for high temperature electronics such as the non-volatile memory component. We demonstrate epitaxial Al M N/Mo/SiC heterostructures, which provides both the crystalline and surface features that promote high-quality ferroelectric nitride film growth. Omega scans of the Mo (110) reflection exhibit a full width at half max of < 0.02° (40 arc sec) and the (0002) peak of the subsequently grown nitride film had a value of 1.1° for 160 nm thick Al 0.7 Sc 0.3 N and 1.3° for 400 nm thick Al 0.94 B 0.06 N. The crystallographic relationships found between the Al M N, Mo, and SiC layers indicate an advancement in sputter deposition of epitaxial films. Ferroelectric switching is also shown at 400 °C in both samples via polarization-electric field hysteresis and pulsed measurements, which exhibited P r values >100 μC cm -2 and E c between 3 and 4 M V cm -1 ⁠, despite a large presence of oxygen in both Al M N films ranging between 4 and 5 at.%, revealed by compositional analysis. This study demonstrates the process for synthesizing high-crystal quality ferroelectric nitride films, which can be used in extremely high temperature applications.

74 ATOMIC AND MOLECULAR PHYSICS↗

A model of the effect of the satellite photosheath on a double floating probe system

Description of a model developed to predict the interactions between multiple electrostatic probes separated by distances that are shorter than or comparable to the characteristic plasma shielding length. The computation involves crude approximations accounting for space charge effects, currents due to the emission and exchange of photoelectrons, and currents from the ambient plasma. Floating potentials are calculated by requiring current balance for each probe and solving by iterating the resulting coupled nonlinear equations. Although only qualitative accuracy is claimed, predictions using the model are found to be in good agreement with observations from the Explorer 45 satellite. The Explorer 45 satellite measures the potential difference between a pair of symmetrical spherical floating probes. The Explorer 45 data show that with increasing altitude, first, the sunward sphere will typically assume a more negative potential than the antisunward sphere; second, the polarities of the probes in the region L = 2 to 4 may switch, sometimes several times; and, finally, near the plasmapause the detector output may saturate, the sunward sphere being more negative.

Cauffman, D. P.↗

Optical conversion method

An optical pickup comprising an electrooptical device located between two crossed polarizing devices all positioned along a common optical axis is described for switching a TV system between a color mode and a black and white mode. Embodiments in which the electrooptical system is used as a neutral density filter, a selective color filter, or a light shutter as applied to a television camera are described. Where the optical system is used as a selective color filter to produce light beams of alternating color in a field sequential color television system, deactivation of the optical system renders the television a black and white system.

Perry, W. E.↗

Advanced 30/20 GHz multiple-beam antennas for communications satellites

Design concepts under development utilize two separate spacecraft antenna systems, one uplink at 30 GHz and the other a downlink at 20 GHz, where each antenna provides multiple fixed and scanning beams. Two contractors completed configuration trade-off studies and breadboarding of critical technology components, and are fabricating and testing proof-of-concept (POC) models to demonstrate the technology feasibility. Technology developments required for the proposed systems are presented, along with each contractor's progress to date. The technology development areas discussed include: (1) offset Cassegrain and shaped reflector systems for narrow beams with low sidelobes and wideangle off-axis scan; (2) diplexed beam-forming networks for dual polarization, low sidelobes, and fixed and scan-beam operation; (3) fast switching networks for scanning beams; and (4) fabrication of precision feed components and large offset reflectors.

Myhre, R. W.↗

Advanced 30/20 GHz multiple-beam antennas for communications satellites

Design concepts under development utilize two separate spacecraft antenna systems, one uplink at 30 GHz and the other a downlink at 20 GHz, where each antenna provides multiple fixed and scanning beams. Two contractors completed configuration trade-off studies and breadboarding of critical technology components, and are fabricating and testing proof-of-concept (POC) models to demonstrate the technology feasibility. Technology developments required for the proposed systems are presented, along with each contractor's progress to date. The technology development areas discussed include: (1) offset Cassegrain and shaped reflector systems for narrow beams with low sidelobes and wideangle off-axis scan; (2) diplexed beam-forming networks for dual polarization, low sidelobes, and fixed and scan-beam operation; (3) fast switching networks for scanning beams; and (4) fabrication of precision feed components and large offset reflectors.

Myhre, R. W.↗

Optical Path Switching Based Differential Absorption Radiometry for Substance Detection

A system and method are provided for detecting one or more substances. An optical path switch divides sample path radiation into a time series of alternating first polarized components and second polarized components. The first polarized components are transmitted along a first optical path and the second polarized components along a second optical path. A first gasless optical filter train filters the first polarized components to isolate at least a first wavelength band thereby generating first filtered radiation. A second gasless optical filter train filters the second polarized components to isolate at least a second wavelength band thereby generating second filtered radiation. The first wavelength band and second wavelength band are unique. Further, spectral absorption of a substance of interest is different at the first wavelength band as compared to the second wavelength band. A beam combiner combines the first and second filtered radiation to form a combined beam of radiation. A detector is disposed to monitor magnitude of at least a portion of the combined beam alternately at the first wavelength band and the second wavelength band as an indication of the concentration of the substance in the sample path.

Sachse, Glen W.↗

Optical path switching based differential absorption radiometry for substance detection

An optical path switch divides sample path radiation into a time series of alternating first polarized components and second polarized components. The first polarized components are transmitted along a first optical path and the second polarized components along a second optical path. A first gasless optical filter train filters the first polarized components to isolate at least a first wavelength band thereby generating first filtered radiation. A second gasless optical filter train filters the second polarized components to isolate at least a second wavelength band thereby generating second filtered radiation. A beam combiner combines the first and second filtered radiation to form a combined beam of radiation. A detector is disposed to monitor magnitude of at least a portion of the combined beam alternately at the first wavelength band and the second wavelength band as an indication of the concentration of the substance in the sample path.

Sachse, Glen W.↗

Optical path switching based differential absorption radiometry for substance detection

An optical path switch divides sample path radiation into a time series of alternating first polarized components and second polarized components. The first polarized components are transmitted along a first optical path and the second polarized components along a second optical path. A first gasless optical filter train filters the first polarized components to isolate at least a first wavelength band thereby generating first filtered radiation. A second gasless optical filter train filters the second polarized components to isolate at least a second wavelength band thereby generating second filtered radiation. A beam combiner combines the first and second filtered radiation to form a combined beam of radiation. A detector is disposed to monitor magnitude of at least a portion of the combined beam alternately at the first wavelength band and the second wavelength band as an indication of the concentration of the substance in the sample path.

Sachse, Glen W.↗

Tunneling current-controlled spin states in few-layer van der Waals magnets

Abstract Effective control of magnetic phases in two-dimensional magnets would constitute crucial progress in spintronics, holding great potential for future computing technologies. Here, we report a new approach of leveraging tunneling current as a tool for controlling spin states in CrI 3 . We reveal that a tunneling current can deterministically switch between spin-parallel and spin-antiparallel states in few-layer CrI 3 , depending on the polarity and amplitude of the current. We propose a mechanism involving nonequilibrium spin accumulation in the graphene electrodes in contact with the CrI 3 layers. We further demonstrate tunneling current-tunable stochastic switching between multiple spin states of the CrI 3 tunnel devices, which goes beyond conventional bi-stable stochastic magnetic tunnel junctions and has not been documented in two-dimensional magnets. Our findings not only address the existing knowledge gap concerning the influence of tunneling currents in controlling the magnetism in two-dimensional magnets, but also unlock possibilities for energy-efficient probabilistic and neuromorphic computing.

Science & Technology - Other Topics↗

Near-field infrared imaging of polar domain walls in Ni 3 TeO 6

Domain walls are leading platforms for the development of ultra-low power switching and memory devices due to their potential to be moved, created, and erased in real time and to mitigate heat flux. Interface vs wavelength size effects unfortunately preclude the measurement of phonons by traditional spectroscopic techniques, so it has been challenging to unravel the primary excitations of the lattice and the symmetries that they represent across these functional interfaces. In this work, we employ synchrotron-based near-field infrared nanospectroscopy to image polar domain walls in multiferroic Ni 3 TeO 6 . This is a unique platform because, in addition to hosting polar and chiral domains that are interlocked with one another, Ni 3 TeO 6 displays both charged and neutral interfaces depending upon the direction allowing the development of structure–property relations. From a local structure and a strain point of view, we find charged walls that are twice as wide as neutral walls as well as strong frequency shifts of vibrational modes across the charged walls. The near-field amplitude drops across the walls as well. We discuss these trends in terms of polarization and chirality as well as phonon lifetimes at functional interfaces.

36 MATERIALS SCIENCE↗

Ultrasensitive Sub-monolayer Palladium Induced Chirality Switching and Topological Evolution of Skyrmions

Chiral spin textures are fundamentally interesting, with promise for device applications. Stabilizing chirality is conventionally achieved by introducing Dzyaloshinskii-Moriya interaction (DMI) in asymmetric multilayers, where the thickness of each layer is at least a few monolayers. Here we report an ultrasensitive chirality switching in (Ni/Co) n multilayer induced by capping with only 0.22 monolayer of Pd. Using spin-polarized low-energy electron microscopy, we monitor the gradual evolution of domain walls from left-handed to right-handed Néel walls and quantify the DMI induced by the Pd capping layer. We also observe the chiral evolution of a skyrmion during the DMI switching, where no significant topological protection is found as the skyrmion winding number varies. This corresponds to a minimum energy cost of <1 attojoule during the skyrmion chirality switching. Here, our results demonstrate the detailed chirality evolution within skyrmions during the DMI sign switching, which is relevant to practical applications of skyrmionic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ferroelectricity in a semiconducting all-inorganic halide perovskite

Ferroelectric semiconductors are rare materials with both spontaneous polarizations and visible light absorptions that are promising for designing functional photoferroelectrics, such as optical switches and ferroelectric photovoltaics. The emerging halide perovskites with remarkable semiconducting properties also have the potential of being ferroelectric, yet the evidence of robust ferroelectricity in the typical three-dimensional hybrid halide perovskites has been elusive. Here, we report on the investigation of ferroelectricity in all-inorganic halide perovskites, CsGeX 3 , with bandgaps of 1.6 to 3.3 eV. Their ferroelectricity originates from the lone pair stereochemical activity in Ge (II) that promotes the ion displacement. This gives rise to their spontaneous polarizations of ~10 to 20 μC/cm 2 , evidenced by both ab initio calculations and key experiments including atomic-level ionic displacement vector mapping and ferroelectric hysteresis loop measurement. Furthermore, characteristic ferroelectric domain patterns on the well-defined CsGeBr 3 nanoplates are imaged with both piezo-response force microscopy and nonlinear optical microscopic method.

36 MATERIALS SCIENCE↗

Relationship among the Crystal Structure, Texture, and Macroscopic Properties of Tetragonal (Pb,La)(Zr,Ti)O 3 Ferroelectrics Investigated by In Situ High-Energy Synchrotron Diffraction

In situ diffraction investigations have played an important role in experimentally revealing the mechanism of piezoelectric and ferroelectric properties. In this study, a pure tetragonal ferroelectric ceramic of La-doped PbZr 0.5 Ti 0.5 O 3 (LaPZT50) was investigated to eliminate the complex influence of phase coexistence. The electric field evolutions of the crystal structure, domain switching, and lattice deformation of the tetragonal phase have been revealed by in situ high-energy synchrotron X-ray diffraction. Furthermore, we found that the crystal structure of LaPZT50 is quite stable, showing a negligible change in the Pb–O bond length, unit cell volume, and spontaneous polarization upon application of an in situ external electric field. Importantly, the maximum macroscopic polarization of tetragonal LaPZT50 is defined by the 111-oriented grains. As determined by the intensity difference, the switching of non-180° domains plays a more significant role in contributing to the macroscopic strain than lattice deformation. These results further imply that the phase coexistence around the morphotropic phase boundary facilitates domain wall motion in the tetragonal phase and improves the ferroelectric and piezoelectric properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing atomic-scale switching pathways in van der Waals ferroelectrics

Two-dimensional (2D) van der Waals (vdW) materials hold the potential for ultrascaled ferroelectric (FE) devices due to their silicon compatibility and robust polarization down to atomic scale. However, the inherently weak vdW interactions enable facile sliding between layers, introducing complexities beyond those encountered in conventional ferroelectric materials and presenting substantial challenges in uncovering intricate switching pathways. Here, we combine atomic-resolution imaging under in situ electrical biasing conditions with first-principles calculations to unravel the atomic-scale switching mechanisms in SnSe, a vdW group IV monochalcogenide. Our results uncover the coexistence of a consecutive 90° switching pathway and a direct 180° switching pathway from antiferroelectric (AFE) to FE order in this vdW system. Atomic-scale investigations and strain analysis reveal that the switching processes simultaneously induce interlayer sliding and compressive strain, while the lattice remains coherent despite the presence of multidomain structures. These findings elucidate vdW ferroelectric switching dynamics at atomic scale and lay the foundation for the rational design of 2D ferroelectric nanodevices.

Li, Xinyan [Rice University, Houston, TX (United S↗

Observation of Switchable Chiral Magnons in an Altermagnet

Chiral magnons, the quanta of handed spin waves, transport spin angular momentum without energy loss due to Joule heating. Here, the recently discovered altermagnets were proposed to host chiral magnons arising from a nonrelativistic exchange mechanism, similar to that in ferromagnets but without net magnetization, offering a stray-field-free platform for efficient magnon spin-current manipulation. In this Letter, we directly observed chiral magnons in the altermagnetic prototype MnTe using polarized inelastic neutron scattering. Furthermore, the magnon chirality was found to be reversibly switched by magnetic-field control, establishing a robust foundation for functional altermagnetic magnonics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarization-entangled source for flex-grid C+L-band quantum networks

We demonstrate an ultrabroadband polarization-entangled source integrating both C- and L-band wavelength-selective switches for spectral routing and allocation in a single fiberized setup, verifying high fidelity through tomography of all 150 pairs of 25 GHz-wide channels.

Alshowkan, Muneer↗

Ice depolarization of the Comstar beacon at 28.56 GHz during low fades and correlation with radar backscatter

Radar correlation with significant ice depolarization events accompanied by low copolarization fades of the 28.56-GHz Comstar beacon signal are described for an experimental program at Wallops Island, VA. Using a Faraday switch at the front end of the receiver, the copolarization and cross-polarization levels of the 28.56-GHz beacon signal are sequentially monitored. A nearby high resolution S-band radar pointing along the earth-satellite path monitors the simultaneous ice and rain reflectivity. For a first case considered, excellent correlation is noted between the cross-polarization events and relatively large and extended ice reflectivities along a segment of the earth-satellite path at altitudes near and above the 0 C isotherm. In a second case, the radar and receiver data strongly suggest the cross-polarization mechanism is due to a hailshaft which intersects the path at altitudes well below the 0 deg isotherm.

Goldhirsh, J.↗