Search NASA⌕ Search

SEARCH · Search NASA

Results for “precipitation characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Polymer nanoparticle photocatalysts realized in non-aqueous solvents

Colloidal organic nanoparticles (oNPs) have emerged as a promising category of photocatalyst, thanks to their long-lived surface-bound charges, electronic tunability, and strong absorption in the visible spectrum. Our previous research has established a direct correlation between charge generation in oNPs and their photocatalytic activity, highlighting their effectiveness as a framework for stable, long-lived free carriers. However, oNPs have been restricted to use only in aqueous environments as a result of being synthesized via either nano-emulsion or nano-precipitation procedures. Herein, we present a method for transferring oNP photocatalysts from water into polar non-aqueous solvents while retaining their long-term colloidal stability. We observed that the polymer chains in the solvent-transferred oNPs rearrange from a predominantly H-aggregate structure in water to a combination of H- and J-aggregate characteristics in N,N-dimethylformamide, suggesting a dynamic rearrangement in response to the new solvent environment. Importantly, transient absorption and time-resolved microwave conductivity measurements confirm that the solvent-transferred oNPs maintain their ability to generate free charges at an internal heterojunction. This development opens unique opportunities for eventually leveraging light-generated, long-lived electrons and holes in synthetic redox chemistry across diverse solvent environments, a direction that will be explored in future studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Climate change will reduce North American inland wetland areas and disrupt their seasonal regimes

Abstract Climate change can alter wetland extent and function, but such impacts are perplexing. Here, changes in wetland characteristics over North America from 25° to 53° North are projected under two climate scenarios using a state-of-the-science Earth system model. At the continental scale, annual wetland area decreases by ~10% (6%-14%) under the high emission scenario, but spatiotemporal changes vary, reaching up to ±50%. As the dominant driver of these changes shifts from precipitation to temperature in the higher emission scenario, wetlands undergo substantial drying during summer season when biotic processes peak. The projected disruptions to wetland seasonality cycles imply further impacts on biodiversity in major wetland habitats of upper Mississippi, Southeast Canada, and the Everglades. Furthermore, wetlands are projected to significantly shrink in cold regions due to the increased infiltration as warmer temperature reduces soil ice. The large dependence of the projections on climate change scenarios underscores the importance of emission mitigation to sustaining wetland ecosystems in the future.

54 ENVIRONMENTAL SCIENCES↗

Historical evaluation and future projections of compound heatwave and drought extremes over the conterminous United States in CMIP6 *

Abstract Independently, both droughts and heatwaves can induce severe impacts on human and natural systems. However, when these two climate extremes occur concurrently in a given region, their compound impacts are often more pronounced. With the improvement in both the spatiotemporal resolution and representation of complex climate processes in the global climate models (GCMs), they are increasingly used to study future changes in these extremes and associated regional impacts. However, GCM selection for such impact assessments is generally based on historical performance and/or future mean changes, without considering individual or compound extremes. In contrast, this study evaluates historical performance and projected changes in heatwaves, droughts, and compound heatwave-droughts using an ensemble of GCMs from the latest Phase 6 of Coupled Models Intercomparison Project at a regional scale across the conterminous United States. Additionally, we explore the inter-model differences in the projected changes that are associated with various characteristics of extremes and the choice of drought indices. Our analysis reveals considerable variation among the GCMs, as well as substantial differences in the projected changes based on the choice of drought indices and region of interest. For example, the projected increases in both the frequency and intensity of drought and associated compound extreme days, based on the standardized precipitation evapotranspiration index far exceed those derived from the standard precipitation index. Further, the largest changes in the frequency of compound extremes are projected over the Southwest, South Central, and parts of the Southeast while the smallest changes are projected over the Northeast. Overall, this study provides important insights for the interpretation and selection of GCMs for future assessment studies that are crucial for the development of regional adaptation strategies in the face of climate change.

54 ENVIRONMENTAL SCIENCES↗

Low-Temperature Plasma Treatment for Enhanced Recovery of Highly Valued Critical REEs from Coal (Final Report)

The principle objective of this project was to develop a novel process flowsheet using low-temperature plasma treatment (LTP) integrated with conventional hydrometallurgical processes to recover rare earth elements (REEs), especially highly valued REEs (i.e. scandium and critical REEs), from coal and coal byproducts. LTP treatment was used to pretreat the solid feed material prior to leaching in an effort to improve the leaching characteristics of the REEs and potentially reduce acid consumption. Initially, a detailed experimental program was performed on a laboratory LTP furnace to identify a set of process parameter values to be used for assessing the enhanced leaching performance achieved on four specific gravity fractions of West Kentucky No. 13 and Fire Clay coarse coal refuse materials. High-temperature oxidation (HTO)) was also evaluated as a means for improving REE leachability on the same fractions of both coal sources. The lixiviants used to assess leachability improvements included: i) untreated water, ii) 0.1 M ammonium sulfate solution and iii) 1.2 M sulfuric acid solution at a temperature of 75°C. The laboratory data was used to develop multiple process flow sheets using HTO only to produce a rare earth oxide mix concentrate or utilizing both LTP and HTO treatment processes to generate a high purity heavy REO mix concentrate and a light REO mix concentrate. A techno-economic analysis was performed on each circuit. Low-temperature plasma oxidation was found to enhance REE leaching characteristics for all specific gravity (SG) fractions of the West Kentucky No. 13 coarse refuse material. The leaching recovery improvement was preferentially achieved for the heavy REEs with higher values obtained when treating the lower density fraction material. For example, the leaching recovery for the heavy REEs in the untreated 1.6 SG Float fraction material was 8% in a 0.1 M ammonium sulfate solution. After LTP treatment for 32 hours, heavy REE recovery increased to 33%. The corresponding recovery value for the light REEs was 10%. These findings indicate a strong affinity of the heavy REEs with the organic material, which is the component being reduced in content during the LTP treatment. Scanning electron micrographs showed the development of a honeycomb structure with increased LTP treatment with higher surface area as confirmed from BET measurements. Higher surface area promotes improved leaching efficiency due to enhance chemical interactions. When using 1.2 M sulfuric acid, the LTP treatment was found to provide a heavy REE recovery increase from 23% to 53% for the 1.6 SG Float fraction which corresponded to an ash content increase from around 20% to 35%. However, LTP treatment provided no improvement in leaching characteristic for the 2.2 SG sink material in the acid solution, which was likely due to the low organic content. The LTP treatment of the Fire Clay SG fractions provided no improvement in REE leaching characteristic, which may be due to the association with REE minerals such as monazite and REE-associated mineral matter such as clays. High temperature oxidation using temperatures in the range of 600-750OC was found to significantly enhance the leaching characteristics of both the light and heavy REEs for all density fractions in both coarse coal refuse materials. Generally, the increase in light REE recovery for the West Kentucky material was from 15% for the untreated material to 90% for the HTO treated material at 600°C. Recovery values dropped significantly when using temperatures below 600°C and above 750°C. The impact of the excessive temperatures was most likely a result of sintering. For the heavy REEs, HTO significantly improved recovery in the lighter SG fractions, which may be due to an affinity with the organic content. Only limited heavy REE recovery improvement was obtained for the denser SG fractions. Another benefit of HTO is the conversion of calcium-based minerals to a very soluble calcium oxide, which is removable using a mild acid solution, and the conversion of Fe minerals to relatively insoluble minerals such as hematite and magnetite. The pregnant leaching solution produced from the leaching of all SG fractions obtained from both coal sources was treated using two stages of solvent extraction procedurally modeling a rougher-cleaner circuit followed by oxalic acid precipitation. Rare earth oxide products having a purity greater than 97% was produced from nearly all of the SG fractions. A novel process flowsheet was developed based on the selective leaching of heavy REEs that was made possible through LTP treatment of West Kentucky No. 13 coarse refuse followed by salt leaching. In the flowsheet, coal refuse material is ground to a top size of 1mm and then treated by LTP. The treated material is mixed into a 0.1 M ammonium sulfate solution and then filtered to produce a heavy REE enriched pregnant leach solution. The heavy REEs are concentrated by two stages of selective precipitation to produce a heavy REE mix oxalate and then roasted to obtain a heavy REO mix concentrate. The solid residues remaining after salt leaching is dried and then subjected to HTO treatment followed by concentration using selective precipitation and roasting to produce a light REO mix concentrate. An alternative circuit was developed using HTO treatment only to treat 100% of the coarse refuse material followed by selective precipitation and roasting to generate a high purity REO mix product. A techno-economic analysis performed for the treatment of West Kentucky No. 13 and Fire Clay coarse refuse based on a hypothetical 500-tph plant revealed that the net present value for all scenarios was significantly negative. Primary reasons include: i) a substantial decrease in the basket value of the final product relative to the feed and ii) high chemical costs relative to the amount of product generated. The basket value reduction was primarily due to little to no scandium recovery due to poor leaching characteristics when using low acid concentrations as necessitated by the low feed grades. Operating costs were primarily influenced by the chemical costs relative to the kilograms of concentrate produced and feed grade. For the Fire Clay coarse refuse material, the total operating cost was estimated to be $354 per kg of REO produced which was higher than the basket value of the REO product ($276/kg). Approximately 37% of the total cost was the sulfuric acid used during the leaching process. A comparative analysis performed to assess the economic viability of using low-temperature plasma furnaces found that market value enhancement for the generation of both heavy REO and light REO concentrates will be needed in addition to significant technology advancements to reduce the cost of plasma furnaces.

01 COAL, LIGNITE, AND PEAT↗

Hydrologic Model Files (PRMS) for Historical Conditions in the East River Watershed, Colorado between 1987-2019

The data package contains model input and output file for the East River watershed (85 km2) located in the headwaters of the Colorado River. The model is the U.S. Geological Survey (USGS) Precipitation-Modeling Runoff System (PRMS) for the historical, or baseline, condition (1987-2019) to assess the efficiency of summer monsoon rains to generate streamflow. The finite difference grid resolution is 100 m with elevations resampled from the USGS National Elevation Dataset. LANDFIRE raster data is used to derive parameters of dominant cover type, summer and winter cover density, canopy interception characteristics for snow and rain and transmission coefficient for shortwave radiation. Climate forcing uses minimum and maximum daily temperature lapse rates defined by the two Snow Telemetry (SNOTEL) stations located in the vicinity of the East River adjusted for aspect. Schofield SNOTEL snowfall is spatially distributed using LiDAR derived snow depth observations from the Airborne Snow Observatory (ASO) flown 4 April 2016. Snow depths are converted to snow water equivalent based on ground surveys and density modeling. Rainfall is spatially distributed using the monthly Parameter-elevation Relationships on Independent Slopes Model 30-year monthly averages. Simulated solar radiation is calibrated to match weather station observations. Model verification of snow water equivalent (SWE) accumulation and ablation relies on the 2018 and 2019 ASO maps and weather station snow depth. The data package contains model input files in text format, model documentation in pfd and a readme.txt file to help users understand the file structure to run the program.

54 ENVIRONMENTAL SCIENCES↗

An ecologically-constrained deep learning model for tropical leaf phenology monitoring using PlanetScope satellites

In tropical forests, leaf phenology signals leaf-on/off status and exhibits considerable variability across scales from a single tree-crown to the entire forest ecosystem. Such phenology signals importantly regulate large-scale biogeochemical cycles and regional climate. PlanetScope CubeSats data with a 3-m resolution and near-daily global coverage provide an unprecedented opportunity to monitor both fine- and ecosystem-scale phenology variability along large environmental gradients. However, a scalable method that accurately characterizes leaf phenology from PlanetScope with biophysically meaningful metrics remains lacking. Here we developed an index-guided, ecologically constrained autoencoder (IG-ECAE) method to automatically derive a deciduousness metric (i.e. percentage of tree canopies with leaf-off status within an image pixel) from PlanetScope. The IG-ECAE first estimated the reflectance spectra of leafy/leafless canopies based on their spectral indices characteristics, then used the derived reflectance spectra to guide an autoencoder deep learning method with additional ecological constraints to refine the reflectance spectra, and finally used linear spectral unmixing to estimate the relative abundance of leafless canopies (or deciduousness) per PlanetScope image pixel. We tested the IG-ECAE method at 16 tropical forest sites spanning multiple continents and a large precipitation gradient (1470-2819 mm year -1 ). Among these sites, we evaluated the PlanetScope-derived deciduousness with corresponding measures derived from WorldView-2 (n=9 sites) and local phenocams (n=9 sites). Our results show that PlanetScope-derived deciduousness agrees: 1) with that derived from WorldView-2 at the patch level (90m×90m) with r 2 =0.89 across all sites; and 2) with that derived from phenocams to quantify ecosystem-scale seasonality with r 2 ranging from 0.62-0.96. These results demonstrate the effectiveness and scalability of IG-ECAE in characterizing the wide variability in deciduousness across scales from pixels to forest ecosystems, and from a single date to the full annual cycle, indicating the potential for using high-resolution satellites to track the large-scale phenological patterns and response of tropical forests to climate change.

54 ENVIRONMENTAL SCIENCES↗

The Water Balance Representation in Urban‐PLUMBER Land Surface Models

Abstract Urban Land Surface Models (ULSMs) simulate energy and water exchanges between the urban surface and atmosphere. However, earlier systematic ULSM comparison projects assessed the energy balance but ignored the water balance, which is coupled to the energy balance. Here, we analyze the water balance representation in 19 ULSMs participating in the Urban‐PLUMBER project using results for 20 sites spread across a range of climates and urban form characteristics. As observations for most water fluxes are unavailable, we examine the water balance closure, flux timing, and magnitude with a score derived from seven indicators expecting better scoring models to capture the latent heat flux more accurately. We find that the water budget is only closed in 57% of the model‐site combinations assuming closure when annual total incoming fluxes (precipitation and irrigation) fluxes are within 3% of the outgoing (all other) fluxes. Results show the timing is better captured than magnitude. No ULSM has passed all water balance indicators for any site. Models passing more indicators do not capture the latent heat flux more accurately refuting our hypothesis. While output reporting inconsistencies may have negatively affected model performance, our results indicate models could be improved by explicitly verifying water balance closure and revising runoff parameterizations. By expanding ULSM evaluation to the water balance and related to latent heat flux performance, we demonstrate the benefits of evaluating processes with direct feedback mechanisms to the processes of interest.

Jongen, H. J.↗

Farmers’ Perceptions of Marginal Land for Biofuel Crops

The dataset includes the survey results about farmers’ perceptions of marginal land availability and the likelihood of a land pixel being marginal based on a machine learning model trained from the survey. Two spreadsheet files are the farmer and farm characteristics (marginal_land_survey_data_shared.xlsx), and the existing land use of marginal lands (land_use_info_sharing.xlsx). Note: the blank cells in these two spreadsheets mean missing values in the survey response. The GeoTiff file includes two bands, one the marginal land likelihood in the Midwestern states (0-1), the other the dominant reason of land marginality (0-5; 0 for farm size, 1 for growing season precipitation, 2 for root zone soil water capacity, 3 for average slope, 4 for growing season mean temperature, and 5 for growing season diurnal range of temperature). To read the data, please use a GIS software such as ArcGIS or QGIS.

marginal land↗

Triple-frequency radar retrieval of microphysical properties of snow

Abstract. An algorithm based on triple-frequency (X, Ka, W) radar measurements that retrieves the size, water content and degree of riming of ice clouds is presented. This study exploits the potential of multi-frequency radar measurements to provide information on bulk snow density that should underpin better estimates of the snow characteristic size and content within the radar volume. The algorithm is based on Bayes' rule with riming parameterised by the “fill-in” model. The radar reflectivities are simulated with a range of scattering models corresponding to realistic snowflake shapes. The algorithm is tested on multi-frequency radar data collected during the ESA-funded Radar Snow Experiment For Future Precipitation Mission. During this campaign, in situ microphysical probes were mounted on the same aeroplane as the radars. This nearly perfectly co-located dataset of the remote and in situ measurements gives an opportunity to derive a combined multi-instrument estimate of snow microphysical properties that is used for a rigorous validation of the radar retrieval. Results suggest that the triple-frequency retrieval performs well in estimating ice water content (IWC) and mean mass-weighted diameters obtaining root-mean-square errors of 0.13 and 0.15, respectively, for log 10IWC and log 10Dm. The retrieval of the degree of riming is more challenging, and only the algorithm that uses Doppler information obtains results that are highly correlated with the in situ data.

54 ENVIRONMENTAL SCIENCES↗

Learning to Correct Climate Projection Biases

The fidelity of climate projections is often undermined by biases in climate models due to their simplification or misrepresentation of unresolved climate processes. While various bias correction methods have been developed to post-process model outputs to match observations, existing approaches usually focus on limited, low-order statistics, or break either the spatiotemporal consistency of the target variable, or its dependency upon model resolved dynamics. We develop a Regularized Adversarial Domain Adaptation (RADA) methodology to overcome these deficiencies, and enhance efficient identification and correction of climate model biases. Instead of pre-assuming the spatiotemporal characteristics of model biases, we apply discriminative neural networks to distinguish historical climate simulation samples and observation samples. The evidences based on which the discriminative neural networks make distinctions are applied to train the domain adaptation neural networks to bias correct climate simulations. We regularize the domain adaptation neural networks using cycle-consistent statistical and dynamical constraints. An application to daily precipitation projection over the contiguous United States shows that our methodology can correct all the considered moments of daily precipitation at approximately $1^\circ$ resolution, ensures spatiotemporal consistency and inter-field correlations, and can discriminate between different dynamical conditions. Our methodology offers a powerful tool for disentangling model parameterization biases from their interactions with the chaotic evolution of climate dynamics, opening a novel avenue toward big-data enhanced climate predictions.

58 GEOSCIENCES↗

Characterization and Geological Implications of Precambrian Calcite-Hosted Phosphate

Constraints on marine phosphate availability and cycling directly inform our understanding of long-term biological evolution. However, early Earth phosphate records are sparse, biased toward siliciclastic samples, and susceptible to post-depositional modification. Well-preserved shallow marine inorganic carbonate precipitates provide a complementary yet understudied record of phosphate cycling. We combined micro-X ray fluorescence mapping, X-ray absorption, and Nuclear Magnetic Resonance spectroscopy on samples of Precambrian syndepositional herringbone calcite (HBC) and microspar to characterize phosphorus speciation and distribution in these carbonate fabrics. Phosphorus spectroscopy from synthetic calcite, HBC, and microspar, is qualitatively consistent with a disordered distribution of phosphate. These characteristics are diagnostic of calcite-hosted phosphate, which is pervasive at low concentrations in HBC and microspar. This study provides evidence that ancient, well-preserved carbonate fabrics retain phosphate sourced from seawater and highlights the potential for an unaltered archive of marine phosphate concentration over geologic time.

58 GEOSCIENCES↗

Unbalancing Symbiotic Nitrogen Fixation: Can We Make Effectiveness More Effective?

One of the most critical uses of carbon fuels is in generating nitrogen fertilizer. Atmospheric dinitrogen is too stable to be used directly by plants, so plants need other chemical forms of nitrogen. Nitrogen fertilizer production uses ~4% of the world’s natural gas. Making N fertilizers leverages methane’s energy content by enabling additional energy to be captured into food and fiber through increased photosynthesis. Manufacturing fertilizer is essential—without it there would only be enough combined nitrogen to feed ~3 billion of the world’s ~7 billion people. How to alter this addiction is not obvious, but the best chance to secure substantial and sustainable amounts of future N might be through symbiotic nitrogen fixation (SNF). SNF describes mutualistic interactions where nitrogen-fixing bacteria provide fixed nitrogen to their plant hosts, freeing them from the need for nitrogen fertilizers. SNF already occurs on a large scale; "biological nitrogen” contributes about 5 Tg N/yr to American agriculture, a quarter of the nitrogen needed. Improving SNF and replacing inorganic fertilizers are both important goals in establishing sustainable and more energy-efficient farming. SNF has been used in agriculture for millennia, largely by using legumes like beans or alfalfa in mixed cropping systems. Legume SNF occurs in root nodules, organs that develop after a growing root is infected by bacteria called rhizobia. In the plant cells of a legume nodule, specialized forms of rhizobia fix nitrogen and can produce enough ammonia to supply the growing plant. The exchange of photosynthetically derived plant carbon compounds for nitrogen reduced by the bacteria is the engine that drives the symbiosis. Important details about the organization of development and metabolism in SNF remain to be determined, such as how plant and bacterial metabolism are coordinated as nitrogen is being fixed and what governs the overall level of nitrogen fixation. Most bacterial mutations that affect SNF completely block fixation (e.g. are Fix – ), providing a limited window into the feedback interactions that must be part of the process. We have investigated an unusual mutant of Sinorhizobium meliloti, a symbiotic partner of alfalfa, that fixes dinitrogen at a normal rate (i.e., it is Fix + ) but is not effective in supporting plant growth (i.e., it is ineffective or Eff – ). We have shown that the mutant has a specific mutation in the glnD gene, which codes for a protein that regulates the bacterial response to nitrogen stress, among other key pathways. A Fix + Eff – phenotype contains an unavoidable puzzle—how is it possible for the bacteria to fix nitrogen at a normal rate and without benefiting the nitrogen starved plant host? After eliminating other possibilities, we proposed that the bacteria synthesize a nitrogen-containing compound that the plant can’t use so that acquiring this compound does not relieve plant nitrogen stress. Extracts of nodules made by glnD mutant strains have high concentrations of pyruvate canaline oxime (PCO), a derivative of the plant defensive compound canaline, a toxic analog of ornithine, an amino acid. Many legumes produce canaline and the related arginine mimic canavanine. For reasons we do not yet understand, the mutation in glnD appears to trigger significant overproduction of canaline in a defense response that leads to substantial synthesis of PCO. We expected the bacteria to be able to use PCO, but we have not been able to grow S. meliloti on PCO under several conditions. PCO thus appears to be a metabolic dead end for both the plant and bacteria. We also examined bacterial catabolic pathways that degrade arginine and canavanine and showed that mutation of these did not alter the symbiosis in an obvious way. In related experiments to examine the metabolic development of root nodules, we carried out an ambitious experiment to simultaneously measure metabolites and protein changes during nodule maturation. For these experiments we used a related symbiotic interaction between S. medicae and Medicago truncatula. M. truncatula has a simpler genome than alfalfa so we could identify plant proteins based on predictions from the DNA sequence. Nodules formed on Medicago grow linearly, with the least mature tissues at the tip. Because development of nitrogen fixation is accompanied by the production of the pigmented plant oxygen carrier protein leghemoglobin, we were able to locate and manually separate the tip, transitional, and mature nitrogen-fixing regions from each other. Advances in proteomic and metabolomic techniques allowed us to analyze these tissues from a pool of as few as 10 nodules. We observed correlated transitions of various enzymes in the plant and bacterial proteomes from those characteristic of free-living metabolism to the microaerobic metabolism of the nitrogen-fixing tissues. The metabolome could not be separated into plant and bacterial domains but was consistent with this overall transition. A subsequent paper examined proteolysis in nodule bacteria. Protein turnover in mature regions of the nodule is significant. We were able to show complexes between various proteins and important proteases, using precipitation capture techniques to isolate the proteases and sensitive proteomic analysis to reveal the associated proteins.

09 BIOMASS FUELS↗

In Situ Observation of Acicular Ferrite Nucleation and Growth at Different Cooling Rate in Ti-Zr Deoxidized Steel

The effects of cooling rate on acicular ferrite (AF) nucleation, growth, and inclusion characteristics in Ti-Zr deoxidation steel were studied by utilizing the high temperature confocal laser scanning microscope (HT-CLSM). The results indicated that with the increase of cooling rate, the ferrite start nucleation temperature decreased, and the difference of first nucleation temperature between AF and ferrite side plate (FSP) reduced. When the cooling rate increased to 10.0 °C/s, AF and FSP simultaneously nucleated at 564.5 °C. In addition, the AF actual growth rate rose with the increase of cooling rate and reached 30.13 µm/s at 10.0 °C/s cooling rate. The AF ratio in microstructure increased first and then decreased with the cooling rate increase and was up to the maximum 45.83 pct at 1.0 °C/s cooling rate. For inclusion characteristics, cooling rates had no obvious effect on inclusion types, but had a great influence on inclusions size distribution. With the cooling rate increase, the inclusion average diameter reduced, and diminished to 1.39 µm at 10.0 °C/s cooling rate. Finally, the AF nucleation on the Ti-Zr-Mn-O-S + TiN inclusion could be explained by the low lattice misfit between ferrite and TiN that precipitated on the Ti-Zr-Mn-O-S inclusion surface.

36 MATERIALS SCIENCE↗

Electrical property enhancement of non-heat-treatable wrought aluminum alloys using graphene additives

With growing efforts of electrification, aluminum’s role as a light-weight conductor material has become increasingly prominent. There is a critical need to improve the electrical performance of aluminum at room temperature and high operating temperatures. In this study, the effect of graphene nanoparticle additives on the electrical performance of a non-heat treatable alloy were (AA3003) explored. Graphene’s unusual structure and electronic properties were used to improve AA3003 properties. Here, in this work, the effects of graphene on the evolution of electrical properties and microstructural features have been explored on lab scale hot extruded AA3003-graphene composites. Hot pressing schedules and extrusion temperatures were varied to investigate changes in intermetallic dispersion characteristics in the presence of dispersed graphene. We measured a reduction of 10.3 % in the temperature coefficient of resistance in the AA3003 sample with 0.05 wt% graphene extruded at 400 °C, along with a maximum increase of 1.1 % in electrical conductivity at 20 °C. Increasing the hot-pressing times up to 8 hours was also found to consistently increase the electrical conductivity, due to increased precipitation of intermetallic phases. Despite being a non-heat treatable alloy, AA3003 displays interesting precipitation dynamics and grain recrystallization trends that can be modulated with varying levels of heat treatment, graphene concentrations, and hot extrusion process parameters.

36 MATERIALS SCIENCE↗

Effects of polarization-reversed EMIC waves on the ring current dynamics

Electromagnetic ion cyclotron (EMIC) waves are widely believed to play an important role in influencing the radiation belt and ring current dynamics. Most studies have investigated the effects or characteristics of EMIC waves by assuming their left-handed polarization. However, recent studies have found that the reversal of polarization, which occurs at higher latitudes along the wave propagation path, can change the wave-induced pitch angle diffusion coefficients. Whether such a polarization reversal can influence the global ring current dynamics remains unknown. In this study, we investigate the ring current dynamics and proton precipitation loss in association with polarization-reversed EMIC waves by using the ring current–atmosphere interactions model (RAM). The results indicate that the polarization reversal of H-band EMIC waves can truly decrease the scattering rates of protons of 10 to 50 keV or >100 keV in comparison with the scenario in which the EMIC waves are considered purely left-handed polarized. Additionally, the global ring current intensity and proton precipitation may be slightly affected by the polarization reversal, especially during prestorm time and the recovery phase, but the effects are not large during the main phase. This is probably because the H-band EMIC waves contribute to the proton scattering loss primarily at E < 10 keV, an energy range that is not strongly affected by the polarization reversal.

79 ASTRONOMY AND ASTROPHYSICS↗

A mountain-induced moist baroclinic wave test case for the dynamical cores of atmospheric general circulation models

Idealized test cases for the dynamical cores of atmospheric general circulation models are informative tools to assess the accuracy of the numerical designs and investigate the general characteristics of atmospheric motions. A new test case is introduced that is built upon a baroclinically unstable base state with an added orographic barrier. The topography is analytically prescribed and acts as a trigger of both baroclinic Rossby waves and inertia–gravity waves on a rotating, regular-sized planet. Both dry and idealized moist configurations are suggested. The latter utilizes the Kessler warm-rain precipitation scheme. The test case enhances the complexity of the existing test suite hierarchy and focuses on the impacts of two midlatitudinal mountain ridges on the circulation. Selected simulation examples from four dynamical cores are shown. These are the Spectral Element and Finite Volume dynamical cores, which are part of the National Center for Atmospheric Research (NCAR) Community Earth System Model (CESM), versions 2.1.3 and 2.2, and the Cubed-Sphere Finite Volume dynamical cores, which is new to CESM version 2.2. In addition, the Model for Prediction Across Scales (MPAS) is tested. The overall flow patterns agree well in the four dynamical cores, but the details can vary greatly. The examples highlight the broad palette of use cases for the test case and reveal physics–dynamics coupling issues.

58 GEOSCIENCES↗

Biofuels as Heavy Fuel Oil Substitutes in the Maritime Sector: Findings and Potential Pathways

The United States Department of Energy has commissioned four national laboratories to evaluate the feasibility of biofuels in the maritime sector. This effort is briefly described including the overall project goals, structure and aims. The large two-stroke crosshead engines used to power large merchant vessels were of particular interest since they can burn lower combustion quality fuels relative to four-stroke engines. This characteristic allows for consideration of pyrolysis oils and hydrothermal liquefaction (HTL) oils which are feedstock agnostic and, in the raw state, are more economical compared to distillate drop-in fuels. Pyrolysis and HTL oils are collectively known as bio-intermediates since they require additional processing for use in distillate fuel systems. The key limiting feature is that these bio-intermediate fuels will cause asphaltene precipitation when blended with heavy fuel oils (HFOs) such as very low sulfur fuel oil (VLSFO) unless they are upgraded to remove water and oxygenates. Economics are the key driver at this point in time, and preliminary techno-economic analyses (TEAs) indicate that bio-intermediates have potentially lower cost relative to other biofuels such as biodiesel and renewable diesel. Additionally, life cycle analyses (LCAs) of feedstocks and pathways show the life cycle carbon reduction benefit relative to heavy fuel oils. In addition to TEA and LCA results, we also present on the technical feasibility of these fuels. These studies have focused on the properties of biofuel blends with VLSFO that are critical to the fuel systems of maritime vessels fueled with HFOs. These properties include the compatibility with fuel system metals, viscosity, and blend stability. Aging studies with blends of VLSFO with biodiesel, HTL, and pyrolysis oils are also presented. Future efforts being planned to conduct additional biofuel testing, including the use of biofuels as pilot fuels in zero carbon shipping options fueled with ammonia and methanol, ship-based demonstrations, and bioresource competition studies.

Kass, Michael↗

Quantifying CanESM5 and EAMv1 sensitivities to Mt. Pinatubo volcanic forcing for the CMIP6 historical experiment

Large volcanic eruptions reaching the stratosphere have caused marked perturbations to the global climate including cooling at the Earth's surface, changes in large-scale circulation and precipitation patterns and marked temporary reductions in global ocean heat content. Many studies have investigated these effects using climate models; however, uncertainties remain in the modelled response to these eruptions. This is due in part to the diversity of forcing datasets that are used to prescribe the distribution of stratospheric aerosols resulting from these volcanic eruptions, as well as uncertainties in optical property derivations from these datasets. To improve this situation for the sixth phase of the Coupled Model Intercomparison Project (CMIP6), a two-step process was undertaken. First, a combined stratospheric aerosol dataset, the Global Space-based Stratospheric Aerosol Climatology (GloSSAC; 1979–2016), was constructed. Next, GloSSAC, along with information from ice cores and Sun photometers, was used to generate aerosol distributions, characteristics and optical properties to construct a more consistent stratospheric aerosol forcing dataset for models participating in CMIP6. This “version 3” of the stratospheric aerosol forcing has been endorsed for use in all contributing CMIP6 simulations. Recent updates to the underlying GloSSAC from version 1 to version 1.1 affected the 1991–1994 period and necessitated an update to the stratospheric aerosol forcing from version 3 to version 4. As version 3 remains the official CMIP6 input, quantification of the impact on radiative forcing and climate is both relevant and timely for interpreting results from experiments such as the CMIP6 historical simulations. This study uses two models, the Canadian Earth System Model version 5 (CanESM5) and the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1), to estimate the difference in instantaneous radiative forcing in simulated post-Pinatubo climate response when using version 4 instead of version 3. Differences in temperature, precipitation and radiative forcings are generally found to be small compared to internal variability. An exception to this is differences in monthly temperature anomalies near 24 km altitude in the tropics, which can be as large as 3 °C following the eruption of Mt. Pinatubo.

58 GEOSCIENCES↗