Influence of calcium content on the atomic structure and phase formation of alkali-activated cement binder
Abstract not provided
Si, Ruizhe↗
SEARCH · Search NASA
Results for “precursor analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
AGILE Detection of a Candidate Gamma-Ray Precursor to the ICECUBE-160731 Neutrino Event
On 2016 July 31 the ICECUBE collaboration reported the detection of a high-energy starting event induced by an astrophysical neutrino. Here, we report on a search for a gamma-ray counterpart to the ICECUBE-160731 event, made with the AGILE satellite. No detection was found spanning the time interval of ±1 ks around the neutrino event time T {sub 0} using the AGILE “burst search” system. Looking for a possible gamma-ray precursor in the results of the AGILE-GRID automatic Quick Look procedure over predefined 48-hr time bins, we found an excess above 100 MeV between 1 and 2 days before T {sub 0}, which is positionally consistent with the ICECUBE error circle, that has a post-trial significance of about 4σ. A refined data analysis of this excess confirms, a posteriori, the automatic detection. The new AGILE transient source, named AGL J1418+0008, thus stands as a possible ICECUBE-160731 gamma-ray precursor. No other space missions nor ground observatories have reported any detection of transient emission consistent with the ICECUBE event. We show that Fermi-LAT had a low exposure for the ICECUBE region during the AGILE gamma-ray transient. Based on an extensive search for cataloged sources within the error regions of ICECUBE-160731 and AGL J1418+0008, we find a possible common counterpart showing some of the key features associated with the high-energy peaked BL Lac (HBL) class of blazars. Further investigations on the nature of this source using dedicated SWIFT ToO data are presented.
79 ASTRONOMY AND ASTROPHYSICS↗
Profiling of the Transcriptomic Responses of Clonostachys rosea Upon Treatment With Fusarium graminearum Secretome
Clonostachys rosea strain ACM941 is a fungal bio-control agent patented against the causative agent of Fusarium Head Blight, Fusarium graminearum. Although the molecular details remain enigmatic, previous studies have suggested that C. rosea may secrete F. graminearum growth inhibitors. Further toward this, experiments described herein show that induction of C. rosea cultures by the addition of an aliquot of F. graminearum(Fg)-spent media (including macroconidia), yield C. rosea (Cr)-spent media that elicited higher anti-F. graminearum activity than either control or deoxynivalenol (DON)-induced Cr-spent media. To gain additional insight into the genetic and metabolic factors modulating this interaction, transcriptomic (RNAseq) profiles of C. rosea in response to DON and Fg-spent media treatment, were developed. This analysis revealed 24,112 C. rosea unigenes, of which 5,605 and 6,285 were differentially regulated by DON and F-spent media, respectively. More than half of these unigenes were up-regulated, with annotations, most notably in the Fg-spent media treatment data, suggesting enhancement of polyketide (PK) and non-ribosomal peptide (NRP) secondary metabolite precursor synthesis, and PK/NRP-like synthases. Four ABC transporters were also up-regulated in response to Fg-spent media. Further analysis showed that the PK and NRP-like synthases belong to three gene clusters that also include ABC transporters, and other genes known to tailor secondary metabolite biosynthesis. The RNAseq data was further validated using quantitative RT-qPCR. Taken together, these results show that C. rosea responds to the presence of Fg-spent media (and to a lesser extent, DON-alone) by up-regulating unique aspects of its secondary metabolism-related genetic repertoire. The identities and roles of C. rosea secondary metabolites produced by the targeted gene clusters are now under investigation.
59 BASIC BIOLOGICAL SCIENCES↗
Delaware Basin Health and Air Quality: Spatiotemporal Analysis of Air Pollutants Collected from Ground and Space Instruments Around the Guadalupe Mountains and Carlsbad Caverns National Parks
Nitrogen dioxide (NO2) is a precursor for secondary air pollutants, which are associated with decreased visibility, and decreased ecosystem and respiratory health. NO2 is a growing threat to national parks within the Delaware Basin where nearby oil and gas activity contributes to deteriorating park conditions, implying adverse effects on the local tourism economy and public health. To demonstrate spatial and temporal patterns of air pollution in the parks, we examined average monthly, seasonal, and annual tropospheric column concentrations of NO2 in Carlsbad Caverns (CAVE) and Guadalupe Mountain (GUMO) National Parks. We used both the NASA Ozone Monitoring Instrument (OMI) and the European Space Agency (ESA) Tropospheric Monitoring Instrument (TROPOMI) to map NO2 tropospheric column densities. Using ground-based emissions values from the Environmental Protection Agency National Emissions Inventory (NEI) for two nearby natural gas processing plants (Indian Basin Gas Plant, South Carlsbad Plant), we extrapolated monthly trends from these point sources and compared seasonal emissions levels with the measurements recorded by OMI and TROPOMI. The NEI data show an 8% increase in flaring from 2013–2021. OMI measured a 38.3% NO2 increase over the Delaware Basin, 15.29% increase over CAVE, and 4.26% decrease over GUMO from 2011–2018. TROPOMI measured a -1% NO2 change over the Delaware Basin, 3% over CAVE, and 7% over GUMO from 2018–2020. The analysis indicates a positive correlation between emissions from fossil fuel exploration and NO2 concentrations above CAVE and GUMO. This information will inform National Park Service air quality monitoring and policy efforts to ensure compliance with the Clean Air Act.
Sean Cusick↗
Silicon oxynitride films deposited by reactive high power impulse magnetron sputtering using nitrous oxide as a single-source precursor
Silicon oxynitride thin films were synthesized by reactive high power impulse magnetron sputtering of silicon in argon/nitrous oxide plasmas. Nitrous oxide was employed as a single-source precursor supplying oxygen and nitrogen for the film growth. The films were characterized by elastic recoil detection analysis, x-ray photoelectron spectroscopy, x-ray diffraction, x-ray reflectivity, scanning electron microscopy, and spectroscopic ellipsometry. Results show that the films are silicon rich, amorphous, and exhibit a random chemical bonding structure. The optical properties with the refractive index and the extinction coefficient correlate with the film elemental composition, showing decreasing values with increasing film oxygen and nitrogen content. The total percentage of oxygen and nitrogen in the films is controlled by adjusting the gas flow ratio in the deposition processes. Furthermore, it is shown that the film oxygen-to-nitrogen ratio can be tailored by the high power impulse magnetron sputtering-specific parameters pulse frequency and energy per pulse.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Experimentation and Modeling of Jet A Thermal Stability in a Heated Tube
High performance aircraft typically use hydrocarbon fuel to regeneratively cool the airframe and engine components. As the coolant temperatures increase, the fuel may react with dissolved oxygen forming deposits that limit the regenerative cooling system performance. This study investigates the deposition of Jet A using a thermal stability experiment and computational fluid dynamics (CFD) modeling. The experimental portion of this study is performed with a high Reynolds number thermal stability (HiRets) tester in which fuel passes though an electrically heated tube and the fuel outlet temperature is held constant. If the thermal stability temperature of the fuel is exceeded, deposits form and adhere to the inside of the tube creating an insulating layer between the tube and the fuel. The HiRets tester measures the tube outer wall temperatures near the fuel outlet to report the effect of deposition occurring inside the tube. Final deposits are also estimated with a carbon burn off analysis. The CFD model was developed and used to simulate the fluid dynamics, heat transfer, chemistry, and transport of the deposit precursors. The model is calibrated to the experiment temperature results and carbon burn-off deposition results. The model results show that the dominant factor in deposition is the heated wall temperature and that most of the deposits are formed in the laminar sublayer. The models predicted a 7.0E-6 kilograms per square meter-sec deposition rate, which compared well to the carbon burn-off analysis deposition rate of 1.0E-6 kilograms per square meter-sec.
Khodabandeh, Julia W.↗
The importance of non-quasigeostrophic forcing during the development of a blocking anticyclone
This study examines the impact of non-quasigeostrophic (NQG) processes during the development of a blocking anticyclone (January 21, 1979 over the southern tip of Greenland) and a precursor, upstream intense cyclone (January 18, 1979). Energy quantities and height tendencies determined from quasigeostrophic estimates are compared with the same quantities obtained from more general formulations. GLA FGGE Level III-b analysis on a 4 deg lat by 5 deg long grid was used to obtain energetics results. It is concluded that NQG processes strengthened the intensity of the block and a precursor explosive cyclone and that a portion of this increase resulted from enhanced baroclinic conversion of eddy potential to eddy kinetic energy and reduced barotropic energy conversion from eddy to zonal flow. It is suggested that NQG vorticity advection, instead of moderating wave developments, enhanced the block development, and it is also suggested that QG forcing might not have been adequate to produce the observed block development.
Tsou, Chih-Hua↗
Solution Monolayer Epitaxy for Tunable Atomically Sharp Oxide Interfaces
Abstract Interfaces play an important role in a variety of devices including transistors, solar cells, and memory components. Atomically sharp interfaces are essential to avoid charge traps that hamper efficient device operation. Sharp interfaces usually require thin‐film fabrication techniques involving ultrahigh vacuum and high substrate temperatures. A new self‐limiting wet chemical process for deposition of epitaxial layers from alkoxide precursors is presented. This method is fast, cheap, and yields perfect interfaces as validated by various analysis techniques. It allows the growth of heterostructures with half‐unit‐cell resolution. The method is demonstrated by designing a hole‐type oxide interface SrTiO 3 /BaO/LaAlO 3 . It is shown that transport through this interface exhibits properties of mixed electron–hole contributions with hole mobility exceeding that of electrons.
Ron, Alon↗
Facile microwave synthesis and photocatalytic activity of monodispersed BaTiO{sub 3} nanocuboids
A facile microwave hydrothermal method for preparation of monodispersed barium titanate (BaTiO{sub 3}) nanocuboids with average size of 13 nm is developed, and the effects of synthesis parameters, such as molar composition of the precursor, synthesis time and temperature, on the morphology of BaTiO{sub 3} nanocrystals are systematically evaluated. The resulting products are characterized by X-ray diffraction (XRD), Raman spectrum, infrared spectrum (IR), UV–vis diffuse reflectance spectrum, water contact angle, thermogravimetry (TG), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), and selected area electron diffraction (SAED). A possible formation mechanism of BaTiO{sub 3} nanocuboids is proposed. The BaTiO{sub 3} nanocuboids show high photocatalytic activity for the degradation of Rhodamin B under UV irradiation. - Highlights: • Monodispersed BaTiO{sub 3} nanocuboids are prepared by a facile microwave process. • The BaTiO{sub 3} nanocuboids have average size of 13 nm. • Oleic acid is the key factor to control the morphology of BaTiO{sub 3} nanocuboids. • BaTiO{sub 3} nanocuboids exhibit enhanced photocatalytic properties.
36 MATERIALS SCIENCE↗
Effects of different annealing atmospheres on the properties of cadmium sulfide thin films
Graphical abstract: The effects of different annealing atmospheres (air and sulfur) on the structural, morphological and optical properties of CdS thin films were studied at three different pH values. - Highlights: • Compactness and smoothness of the films were enhanced after sulfur annealing. • Micro-strain values of some films were improved after sulfur annealing. • Dislocation density values of some films were improved after sulfur annealing. • Band gap values of the films were improved after sulfur annealing. - Abstract: Cadmium sulfide (CdS) thin films were prepared on glass substrates by using chemical bath deposition (CBD) technique. The effects of different annealing atmospheres (air and sulfur) on the structural, morphological and optical properties of CdS thin films were studied at three different pH values. Compactness and smoothness of the films (especially for pH 10.5 and 11) enhanced after sulfur annealing. pH value of the precursor solution remarkably affected the roughness, uniformity and particle sizes of the films. Based on the analysis of X-ray diffraction (XRD) patterns of the films, micro-strain and dislocation density values of the sulfur-annealed films (pH 10.5 and 11) were found to be lower than those of air-annealed films. Air-annealed films (pH 10.5, 11 and 11.5) exhibited higher transmittance than sulfur-annealed films in the wavelength region of 550–800 nm. Optical band gap values of the films were found between 2.31 eV and 2.36 eV.
36 MATERIALS SCIENCE↗
Role of annealing temperature on cation ordering in hydrothermally prepared zinc aluminate (ZnAl2O4) spinel
Highlights: • Investigation of the structural anomaly in Zinc Aluminate Spinel/ZAS (ZnAl{sub 2}O{sub 4}) by chemically inducing the defects by annealing temperature and synthetic pressure. • Hydrothermal synthesis of ZnAl{sub 2}O{sub 4} at 240 °C from nitrate precursors. • Study of the role of annealing temperature (300–900 °C) in tuning cation ordering. • Rietveld analysis of powder X-ray diffraction patterns and Raman spectroscopy to showcase disorder-order transition in ZnAl{sub 2}O{sub 4} spinels. - Abstract: Spinels (AB{sub 2}O{sub 4}) form a niche class of ceramics, which is rich in structural (dis)ordering due to the inherent mixing between the constituent tetrahedral and octahedral sites. The cations (A and B) can form antisite defects under the influence of external parameters like pressure, temperature and nuclear irradiation. The current study reports the formation and evolution of disorder-order structural transition in hydrothermally prepared zinc aluminate spinel ZnAl{sub 2}O{sub 4}. The effect of final calcination temperature (300–900 °C for 9 h) on the degree of cation ordering has been investigated with powder X-ray diffraction, Raman and {sup 27}Al solid-state NMR spectroscopy. Rietveld refinement revealed a gradual disorder to order structural transition accompanied by lower inversion parameter (i{sub s}) and smaller lattice parameter (a) with higher calcination temperature. It was further affirmed by Raman analysis and solid-state NMR spectroscopy probing the ZnO{sub 4} and AlO{sub 4} tetrahedra in spinel. Independent of the degree of cation ordering, nanometric particle size with high surface area was observed in ZnAl{sub 2}O{sub 4} spinel.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Tandem mass spectrometry in combination with product ion mobility for the identification of phospholipids
Concerted tandem and traveling wave ion mobility mass spectrometry (CTS analysis) is a unique method that results in a four-dimensional data set including nominal precursor ion mass, product ion mobility, accurate mass of product ion, and ion abundance. This nontargeted lipidomics CTS approach was applied in both positive- and negative-ion mode to phospholipids present in human serum, and the data set was used to evaluate the value of product ion mobility in identifying lipids in a complex mixture. As a result, it was determined that the combination of diagnostic product ions and unique collisional cross-section values of product ions is a powerful tool in the structural identification of lipids in a complex biological sample.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
MSR Transient Simulation and MSRE Transient Benchmark with SAM and SPECTRA
In recent years, there has been renewed interest in molten salt reactors (MSRs) for their potential advantages compared to reactors that rely on solid fuel. In response to such interest, many methods and codes have been developed to capture the unique features of MSRs. Among them, SPECTRA and SAM are two system analysis codes that have been enhanced to include MSR-specific modeling capabilities, including delayed neutron precursor drift and modified point kinetics equations.This paper discusses the efforts taken to verify and validate these features. A standard MSR system test problem was developed to verify and demonstrate the capability of SPECTRA and SAM on the MSR transient simulation. Sixteen transients were simulated. Further, the results obtained from SPECTRA and SAM show good agreement. The Molten Salt Reactor Experiment transient experiments were reviewed and selected to validate the SPECTRA and SAM codes. The experiments included pump startup and coastdown tests at zero power, reactivity insertion tests at different power levels, frequency tests, and a natural convection test. The simulation results from SPECTRA and SAM show good agreement with the experimental data.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
maranasgroup/uncFBA
In the repository are example scripts that perform uncertainty injection and propagation to flux balance analysis with outputs for a small sample size (for demonstration purpose only). For proper analysis, user should download the scripts and run for a large sample size (e.g., 10,000 samples). If you use the scripts, please cite the following Metabolic Engineering article: “Quantifying the propagation of parametric uncertainty on flux balance analysis” (https://doi.org/10.1016/j.ymben.2021.10.012) There are two subdirectories: /uncFBA/uncBiom: injection of normally distributed noise to biomass precursor coeffcients and ATP maintenance (growth-associated ATP maintenance (GAM) and non-growth associated ATP maintenance (NGAM)) /uncFBA/uncRHS: departure from steady-state by adding noise drawn from normal distribution to the RHS terms of mass balance constraints
Dinh, Hoang↗
Foot-and-Mouth Disease Virus Interserotypic Recombination in Superinfected Carrier Cattle
Viral recombination contributes to the emergence of novel strains with the potential for altered host range, transmissibility, virulence, and immune evasion. For foot-and-mouth disease virus (FMDV), cell culture experiments and phylogenetic analyses of field samples have demonstrated the occurrence of recombination. However, the frequency of recombination and associated virus–host interactions within an infected host have not been determined. We have previously reported the detection of interserotypic recombinant FMDVs in oropharyngeal fluid (OPF) samples of 42% (5/12) of heterologously superinfected FMDV carrier cattle. The present investigation consists of a detailed analysis of the virus populations in these samples including identification and characterization of additional interserotypic minority recombinants. In every animal in which recombination was detected, recombinant viruses were identified in the OPF at the earliest sampling point after superinfection. Some recombinants remained dominant until the end of the experiment, whereas others were outcompeted by parental strains. Genomic analysis of detected recombinants suggests host immune pressure as a major driver of recombinant emergence as all recombinants had capsid-coding regions derived from the superinfecting virus to which the animals did not have detectable antibodies at the time of infection. In vitro analysis of a plaque-purified recombinant virus demonstrated a growth rate comparable to its parental precursors, and measurement of its specific infectivity suggested that the recombinant virus incurred no penalty in packaging its new chimeric genome. These findings have important implications for the potential role of persistently infected carriers in FMDV ecology and the emergence of novel strains.
59 BASIC BIOLOGICAL SCIENCES↗
The expression and function of the achaete-scute genes in Tribolium castaneum reveals conservation and variation in neural pattern formation and cell fate specification
The study of achaete-scute (ac/sc) genes has recently become a paradigm to understand the evolution and development of the arthropod nervous system. We describe the identification and characterization of the ac/sc genes in the coleopteran insect species Tribolium castaneum. We have identified two Tribolium ac/sc genes - achaete-scute homolog (Tc-ASH) a proneural gene and asense (Tc-ase) a neural precursor gene that reside in a gene complex. Focusing on the embryonic central nervous system we find that Tc-ASH is expressed in all neural precursors and the proneural clusters from which they segregate. Through RNAi and misexpression studies we show that Tc-ASH is necessary for neural precursor formation in Tribolium and sufficient for neural precursor formation in Drosophila. Comparison of the function of the Drosophila and Tribolium proneural ac/sc genes suggests that in the Drosophila lineage these genes have maintained their ancestral function in neural precursor formation and have acquired a new role in the fate specification of individual neural precursors. Furthermore, we find that Tc-ase is expressed in all neural precursors suggesting an important and conserved role for asense genes in insect nervous system development. Our analysis of the Tribolium ac/sc genes indicates significant plasticity in gene number, expression and function, and implicates these modifications in the evolution of arthropod neural development.
Non-NASA Center↗
Up-regulation of phosphoinositide metabolism in tobacco cells constitutively expressing the human type I inositol polyphosphate 5-phosphatase
To evaluate the impact of suppressing inositol 1,4,5-trisphosphate (InsP(3)) in plants, tobacco (Nicotiana tabacum) cells were transformed with the human type I inositol polyphosphate 5-phosphatase (InsP 5-ptase), an enzyme which specifically hydrolyzes InsP(3). The transgenic cell lines showed a 12- to 25-fold increase in InsP 5-ptase activity in vitro and a 60% to 80% reduction in basal InsP(3) compared with wild-type cells. Stimulation with Mas-7, a synthetic analog of the wasp venom peptide mastoparan, resulted in an approximately 2-fold increase in InsP(3) in both wild-type and transgenic cells. However, even with stimulation, InsP(3) levels in the transgenic cells did not reach wild-type basal values, suggesting that InsP(3) signaling is compromised. Analysis of whole-cell lipids indicated that phosphatidylinositol 4,5-bisphosphate (PtdInsP(2)), the lipid precursor of InsP(3), was greatly reduced in the transgenic cells. In vitro assays of enzymes involved in PtdInsP(2) metabolism showed that the activity of the PtdInsP(2)-hydrolyzing enzyme phospholipase C was not significantly altered in the transgenic cells. In contrast, the activity of the plasma membrane PtdInsP 5 kinase was increased by approximately 3-fold in the transgenic cells. In vivo labeling studies revealed a greater incorporation of (32)P into PtdInsP(2) in the transgenic cells compared with the wild type, indicating that the rate of PtdInsP(2) synthesis was increased. These studies show that the constitutive expression of the human type I InsP 5-ptase in tobacco cells leads to an up-regulation of the phosphoinositide pathway and highlight the importance of PtdInsP(2) synthesis as a regulatory step in this system.
NASA Discipline Cell Biology↗