Search NASA⌕ Search

SEARCH · Search NASA

Results for “preforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

SnO{sub 2} films: In-situ template-sacrificial growth and photovoltaic property based on SnO{sub 2}/poly(3-hexyl-thiophene) for hybrid solar cell

Highlights: • SnO{sub 2} nanocrystals/thin films were fabricated on ITO glass substrate from preformed SnS thin film as sacrificial template. • The SnO{sub 2} film and SnO{sub 2}/P3HT was characterized by several techniques. • The new hybrid solar cell device was based on the hybrid thin film of SnO{sub 2} NCs and P3HT composites. - Abstract: we described a facile in-situ wet chemical method to prepare SnO{sub 2} thin film on ITO glass substrate from preformed SnS thin film as sacrificial template. The chemical conversion process of SnS to SnO{sub 2} was studied. The SnO{sub 2} film and SnO{sub 2}/P3HT was characterized by several techniques, such as powder X-ray diffract meter (XRD), Raman spectrometer, scanning electron microscope (SEM), atomic force microscope (AFM) and UV–vis spectrophotometer in detail. The new SnO{sub 2}/P3HT hybrid solar cell device showed an open-circuit voltage of 0.185 V, a short-circuit current density of 0.366 mA/cm{sup 2} and a fill factor of 0.247, corresponding to a power conversion efficiency of 0.0167%.

36 MATERIALS SCIENCE↗

Anti-allergic activity of 2,4,6-trihydroxy-3-geranylacetophenone (tHGA) via attenuation of IgE-mediated mast cell activation and inhibition of passive systemic anaphylaxis

tHGA, a geranyl acetophenone compound originally isolated from a local shrub called Melicope ptelefolia, has been previously reported to prevent ovalbumin-induced allergic airway inflammation in a murine model of allergic asthma by targeting cysteinyl leukotriene synthesis. Mast cells are immune effector cells involved in the pathogenesis of allergic diseases including asthma by releasing cysteinyl leukotrienes. The anti-asthmatic properties of tHGA could be attributed to its inhibitory effect on mast cell degranulation. As mast cell degranulation is an important event in allergic responses, this study aimed to investigate the anti-allergic effects of tHGA in cellular and animal models of IgE-mediated mast cell degranulation. For in vitro model of IgE-mediated mast cell degranulation, DNP-IgE-sensitized RBL-2H3 cells were pre-treated with tHGA before challenged with DNP-BSA to induce degranulation. For IgE-mediated passive systemic anaphylaxis, Sprague Dawley rats were sensitized by intraperitoneal injection of DNP-IgE before challenged with DNP-BSA. Both in vitro and in vivo models showed that tHGA significantly inhibited the release of preformed mediators (β-hexosaminidase and histamine) as well as de novo mediators (interleukin-4, tumour necrosis factor-α, prostaglandin D{sub 2} and leukotriene C{sub 4}). Pre-treatment of tHGA also prevented IgE-challenged RBL-2H3 cells and peritoneal mast cells from undergoing morphological changes associated with mast cell degranulation. These findings indicate that tHGA possesses potent anti-allergic activity via attenuation of IgE-mediated mast cell degranulation and inhibition of IgE-mediated passive systemic anaphylaxis. Thus, tHGA may have the potential to be developed as a mast cell stabilizer for the treatment of allergic diseases in the future. - Highlights: • The in vitro and in vivo mast cell stabilizing effects of tHGA were examined. • tHGA counteracts the plasma membrane deformation in degranulating mast cells. • tHGA attenuates preformed and de novo mediators released by degranulating mast cells. • tHGA prevents in vivo mast cell activation and passive systemic anaphylaxis in rats. • tHGA could be a potential mast cell stabilizer for the treatment of allergic diseases.

60 APPLIED LIFE SCIENCES↗

Screening Hofmann Compounds as CO 2 Sorbents: Nontraditional Synthetic Route to Over 40 Different Pore-Functionalized and Flexible Pillared Cyanonickelates

A simple reaction scheme based on the heterogeneous intercalation of pillaring ligands (HIPLs) provides a convenient method for systematically tuning pore size, pore functionality, and network flexibility in an extended series of pillared cyanonickelates (PICNICs), commonly referred to as Hofmann compounds. The versatility of the approach is demonstrated through the preparation of over 40 different PICNICs containing pillar ligands ranging from ~4 to ~15 Å in length and modified with a wide range of functional groups, including fluoro, aldehyde, alkylamine, alkyl, aryl, trifluoromethyl, ester, nitro, ether, and nonmetalated 4,4'-bipyrimidine. The HIPL method involves reaction of a suspension of preformed polymeric sheets of powdered anhydrous nickel cyanide with an appropriate pillar ligand in refluxing organic solvent, resulting in the conversion of the planar [Ni{sub 2}(CN){sub 4}]{sub n} networks into polycrystalline three-dimensional porous frameworks containing the organic pillar ligand. Preliminary investigations indicate that the HIPL reaction is also amenable to forming Co(L)Ni(CN){sub 4}, Fe(L)Ni(CN){sub 4}, and Fe(L)Pd(CN){sub 4} networks. The materials show variable adsorption behavior for CO{sub 2} depending on the pillar length and pillar functionalization. Several compounds show structurally flexible behavior during the adsorption and desorption of CO{sub 2}. Interestingly, the newly discovered flexible compounds include two flexible Fe(L)Ni(CN){sub 4} derivatives that are structurally related to previously reported porous spin-crossover compounds. The preparations of 20 pillar ligands based on ring-functionalized 4,4'-dipyridyls, 1,4-bis(4- pyridyl)benzenes, and N-(4-pyridyl)isonicotinamides are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanospheres of a New Intermetalic FeSn5 Phase: Synthesis Magnetic Properties and Anode Performance in Li-ion Batteries

We synthesized monodisperse nanospheres of an intermetallic FeSn{sub 5} phase via a nanocrystal-conversion protocol using preformed Sn nanospheres as templates. This tetragonal phase in P4/mcc space group, along with the defect structure Fe{sub 0.74}Sn{sub 5} of our nanospheres, has been resolved by synchrotron X-ray diffraction and Rietveld refinement. Importantly, FeSn{sub 5}, which is not yet established in the Fe-Sn phase diagram, exhibits a quasi-one dimensional crystal structure along the c-axis, thus leading to interesting anisotropic thermal expansion and magnetic properties. Magnetization measurements indicate that nanospheres are superparamagnetic above the blocking temperature T{sub B} = 300 K, which is associated with the higher magnetocrystalline anisotropy constant K = 3.33 kJ m{sup -3}. The combination of the magnetization measurements and first-principles density functional theory calculations reveals the canted antiferromagnetic nature with significant spin fluctuation in lattice a-b plane. The low Fe concentration also leads Fe{sub 0.74}Sn{sub 5} to enhanced capacity as an anode in Li ion batteries.

25 ENERGY STORAGE↗

Polymer–Peptide Conjugates Disassemble Amyloid β Fibrils in a Molecular-Weight Dependent Manner

Amyloid aggregation and deposition are associated with many intractable human diseases. Although the inhibition of amyloid protein aggregation has been well-studied, the disaggregation and dissolution of existing amyloid fibrils is less known. Taking a fibrillar assembly of amyloid β (Aβ) peptide as the model system, in this paper we report multivalent polymer–peptide conjugates (mPPCs) that disassemble preformed Aβ fibrils into dispersible sub-100 nm structures. Atomic force microscopy and dynamic light scattering studies show that the disassembly rate of preformed Aβ fibrils is controlled by the molecular weight of mPPCs. Rate equations on fibril disappearance are deduced from a simple model, which indicate that the disassembly reaction is first-order in the concentration of Aβ fibrils and a pseudo-first-order reaction in the concentration of peptide moieties on mPPCs, respectively. We eliminate the possibility that the disassembly occurs by the association between mPPCs and Aβ monomer/oligomers based on circular dichroism and Thioflavin T fluorescence assays. It is mostly likely that the mPPCs disassemble Aβ fibrils through a direct interaction. Finally, the mPPCs may thus offer a general macromolecular design concept that breaks down existing amyloid fibrils in a predictable fashion.

60 APPLIED LIFE SCIENCES↗

Electronic nature of the pseudogap in electron-doped Sr 2 IrO 4

In high-temperature ($T_c$) cuprate superconductors, many exotic phenomena are rooted in the enigmatic pseudogap state, which has been interpreted as consisting of preformed Cooper pairs or competing orders or a combination thereof. Observation of pseudogap phenomenologically in electron-doped Sr 2 IrO 4 —the 5d electron counterpart of the cuprates, has spurred intense interest in the strontium iridates as a testbed for exploring the exotic physics of the cuprates. Here, we examine the pseudogap state of electron-doped Sr 2 IrO 4 by angle-resolved photoemission spectroscopy (ARPES) and parallel theoretical modeling. Our analysis demonstrates that the pseudogap state of Sr 2 IrO 4 appears without breaking the particle–hole symmetry or inducing spectral broadening which are telltale signatures of competing orders in the cuprates. We find quasiparticle dispersion and its temperature dependence in the pseudogap state of Sr 2 IrO 4 to point to an electronic order with a zero scattering wave vector and limited correlation length. Particle–hole symmetric preformed Cooper pairs are discussed as a viable mechanism for such an electronic order. The potential roles of incommensurate density waves are also discussed.

36 MATERIALS SCIENCE↗

A protected annealing strategy to enhanced light emission and photostability of YAG:Ce nanoparticle-based films

A significant obstacle in the development of YAG:Ce nanoparticles as light converters in white LEDs and as biological labels is associated with the difficulty of finding preparative conditions that allow simultaneous control of structure, particle size and size distribution, while maintaining the optical properties of bulk samples. Preparation conditions frequently involve high-temperature treatments of precursors (up to 1400 C), which result in increased particle size and aggregation, and lead to oxidation of Ce(III) to Ce(IV). We report here a process that we term protected annealing, that allows the thermal treatment of preformed precursor particles at temperatures up to 1000 C while preserving their small size and state of dispersion. In a first step, pristine nanoparticles are prepared by a glycothermal reaction, leading to a mixture of YAG and boehmite crystalline phases. The preformed nanoparticles are then dispersed in a porous silica. Annealing of the composite material at 1000 C is followed by dissolution of the amorphous silica by hydrofluoric acid to recover the annealed particles as a colloidal dispersion. This simple process allows completion of YAG crystallization while preserving their small size. The redox state of Ce ions can be controlled through the annealing atmosphere. The obtained particles of YAG:Ce (60 {+-} 10 nm in size) can be dispersed as nearly transparent aqueous suspensions, with a luminescence quantum yield of 60%. Transparent YAG:Ce nanoparticle-based films of micron thickness can be deposited on glass substrates using aerosol spraying. Films formed from particles prepared by the protected annealing strategy display significantly improved photostability over particles that have not been subject to such annealing.

36 MATERIALS SCIENCE↗

Plasma cell adaptation to enhance particle acceleration

A plasma study is performed in order to construct a cell for plasma acceleration purpose. As well, a multicell design is introduced for the injection of beam driver application. The suggested idea is experimentally demonstrated for two plasma cell configuration. The preformed plasma is obtained by a symmetrically driven capacitive audio frequency discharge. It is featured by its moderate pressure of 0.1-0.2 Torr, low consumption power of 130 W maximum, low discharge voltage and frequency up to 950 V and 20 kHz, respectively, and high plasma density from 10{sup 11} to 10{sup 15} cm{sup -3}. The electron temperature obtained by Langmuir double probe varies from 1 up to 16 eV. It is observed that the increases of the discharge voltage and frequency enlarge the plasma parameters to their maximum values. The plasma cell filled with different gases demonstrates that the Ar and He gases manifest the highest ionization efficiency exceeding 100% at 950 V and 20 kHz. The formed plasma is cold; its density is uniform and stable along the positive column for long competitive lifetime. Showing that it follows the conditions to enhance particle acceleration and in conjunction with its periphery devices form a plasma cell that could be extended to serve this purpose. Demonstrating that an injected electron beam into the extended preformed plasma could follow, to long distance, a continuous trajectory of uniform density. Such plasma generated by H{sub 2} or Ar gases is suggested to be used, respectively, for low-density or higher density beam driver.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced Flux Pinning and Critical Currents in YBa2Cu3O7-delta Films by Nanoparticle Surface Decoration: Extension to Coated Conductor Templates

Interfacial engineering via nanoparticle substrate surface decoration has been extended to coated conductor templates. Preformed BaTiO{sub 3} and BaZrO{sub 3} nanoparticles were applied to substrate surfaces, prior to YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) deposition, by using a scalable and inexpensive technique of solution-based suspension. Compared to untreated reference samples, nanodecoration yields improved in-field critical current density (J{sub c}) as well as strong correlated pinning along the c-axis direction of the YBCO film. Accordingly, a much reduced falloff of J{sub c} with magnetic field strength was observed in all of the modified samples. In addition, scaling behavior of the normalized volume pinning force density (F{sub p}) with respect to temperature provided insight as to the differences in flux pinning mechanisms dependent on the decoration technique. Finally, with these results our earlier proof-of-concept demonstrations on nanoparticle modified single crystal substrates were replicated on technological substrates, pointing to the versatility of this simple technique for realization of enhanced high temperature superconductor performance.

36 MATERIALS SCIENCE↗

Solitary waves of laser pulse in a plasma channel

The propagation of a Gaussian laser pulse in a preformed plasma channel is investigated. The conditions for the existence of electromagnetic solitary waves are obtained theoretically by analyzing the differential equation of the pulse spot size including the effects of relativistic self-focusing, ponderomotive self-channeling, and preformed channel focusing. Some solitarylike wave solutions are presented numerically and their possible implications on laser-plasma acceleration are discussed briefly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental investigation of the stimulated Brillouin scattering growth and saturation at 526 and 351 nm for direct drive and shock ignition

We have designed experiments to study the effect of the laser wavelength (0.527 versus 0.351 {mu}m) on the coupling efficiency in plasma conditions relevant to compression and shock ignition (SI) schemes in different intensity regimes. A difficult issue was to produce interaction conditions that are equivalent for the two wavelengths. This was obtained by using plasma preformed from a solid target with a plasma-preforming beam at the same wavelength as the interaction beam. This produced an almost exponential density profile from vacuum to the critical density of the interaction beam in which all interaction mechanisms are taken into account. The growth and saturation of stimulated Brillouin scattering (SBS) have been measured at the two wavelengths, in backward as well as in near-backward directions. We have found that the SBS intensity threshold is {approx}1.5 times higher at 3{omega} than at 2{omega} in agreement with the I{lambda} dependence of the SBS gain. The SBS behaviour is very well reproduced by the linear calculations of the postprocessor PIRANAH, giving us confidence that we have a good control of the relevance of the experimental conditions for the study of the laser wavelength effect on laser-plasma coupling. When SBS reaches the saturation regime, same levels of reflectivity are measured at 2 and 3{omega}. Numerical simulations were performed with the paraxial code HERA to study the contribution of the fluid mechanisms in the saturation of SBS, showing that pump depletion and interplay with filamentation are likely to be the most important processes in SBS saturation for these conditions. This scenario also applies to the SBS of shock ignition high-intensity beams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics of argon plasma waveguide produced by alumina capillary discharge for short wavelength laser application

We have reported the argon (Ar) plasma waveguide produced in an alumina (Al{sub 2}O{sub 3}) capillary discharge and used to guide ultrashort laser pulses at intensities of the order of 10{sup 16} W/cm{sup 2}. The electron density in the plasma waveguide was measured to be 1x10{sup 18} cm{sup -3}, in agreement with one-dimensional magnetrohydrodynamic (MHD) simulations. The MHD code was also used to evaluate the degree of ionization of argon (Ar) in the preformed plasma waveguide. The maximum ion charge state of Ar{sup 3+} in capillary discharge was measured and obtained in the MHD simulations. The spectrum of the propagated laser pulse in the Ar plasma waveguide was not modified and was well reproduced by a particle-in-cell simulations under initial ion charge state of Ar{sup 3+} in the preformed plasma waveguide. The optimum timing for the laser pulse injection was around 150 ns after initiation of a discharge with a peak current of 200 A.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulative design and process optimization of the two-stage stretch-blow molding process

The total production costs of PET bottles are significantly affected by the costs of raw material. Approximately 70 % of the total costs are spent for the raw material. Therefore, stretch-blow molding industry intends to reduce the total production costs by an optimized material efficiency. However, there is often a trade-off between an optimized material efficiency and required product properties. Due to a multitude of complex boundary conditions, the design process of new stretch-blow molded products is still a challenging task and is often based on empirical knowledge. Application of current CAE-tools supports the design process by reducing development time and costs. This paper describes an approach to determine optimized preform geometry and corresponding process parameters iteratively. The wall thickness distribution and the local stretch ratios of the blown bottle are calculated in a three-dimensional process simulation. Thereby, the wall thickness distribution is correlated with an objective function and preform geometry as well as process parameters are varied by an optimization algorithm. Taking into account the correlation between material usage, process history and resulting product properties, integrative coupled simulation steps, e.g. structural analyses or barrier simulations, are performed. The approach is applied on a 0.5 liter PET bottle of Krones AG, Neutraubling, Germany. The investigations point out that the design process can be supported by applying this simulative optimization approach. In an optimization study the total bottle weight is reduced from 18.5 g to 15.5 g. The validation of the computed results is in progress.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Using small angle x-ray scattering to examine the aggregation mechanism in silica nanoparticle-based ambigels for improved optical clarity

Silica-based aerogels are a promising low-cost solution for improving the insulation efficiency of single-pane windows and reducing the energy consumption required for space heating and cooling. Two key material properties required are high porosity and small pore sizes, which lead to low thermal conductivity and high optical transparency, respectively. However, porosity and pore size are generally directly linked, where high porosity materials also have large pore sizes. This is unfavorable as large pores scatter light, resulting in reduced transmittance in the visible regime. In this work, we utilized preformed silica colloids to explore methods for reducing pore size while maintaining high porosity. Further, the use of preformed colloids allows us to isolate the effect of solution conditions on porous gel network formation by eliminating simultaneous nanoparticle growth and aggregation found when using typical sol–gel molecular-based silica precursors. Specifically, we used in situ synchrotron-based small-angle x-ray scattering during gel formation to better understand how pH, concentration, and colloid size affect particle aggregation and pore structure. Ex situ characterization of dried gels demonstrates that peak pore widths can be reduced from 15 to 13 nm, accompanied by a narrowing of the overall pore size distribution, while maintaining porosities of 70%–80%. Optical transparency is found to increase with decreasing pore sizes while low thermal conductivities ranging from 95 +/− 13 mW/m K are maintained. Mechanical performance was found to depend primarily on effective density and did not show a significant dependence on solution conditions. Overall, our results provide insights into methods to preserve high porosity in nanoparticle-based aerogels while improving optical transparency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties of active bismuth centres in silica fibres containing no other dopants

Optical fibre preforms and fibres with a bismuth-doped silica core containing no other dopants have been fabricated by the powder-in-tube technique. The optical loss has been measured for the first time in such fibres in a wide spectral range, from 190 to 1700 nm. We have studied the luminescence of active bismuth centres and the luminescence lifetime for some of their bands in both the preforms and the fibres drawn out from them. (optical fibres)

36 MATERIALS SCIENCE↗

Luminescence and photoinduced absorption in ytterbium-doped optical fibres

Photochemical reactions induced in the glass network of an ytterbium-doped fibre core by IR laser pumping and UV irradiation have been investigated by analysing absorption and luminescence spectra. We have performed comparative studies of the photoinduced absorption and luminescence spectra of fibre preforms differing in core glass composition: Al{sub 2}O{sub 3} : SiO{sub 2}, Al{sub 2}O{sub 3} : Yb{sub 2}O{sub 3} : SiO{sub 2}, and P{sub 2}O{sub 5} : Yb{sub 2}O{sub 3} : SiO{sub 2}. The UV absorption spectra of unirradiated preform core samples show strong bands peaking at 5.1 and 6.5 eV, whose excitation plays a key role in photoinduced colour centre generation in the glass network. 'Direct' UV excitation of the 5.1- and 6.5-eV absorption bands at 244 and 193 nm leads to the reduction of some of the Yb{sup 3+} ions to Yb{sup 2+}. The photodarkening of ytterbium-doped fibres by IR pumping is shown to result from oxygen hole centre generation. A phenomenological model is proposed for the IR-pumping-induced photodarkening of ytterbium-doped fibres. The model predicts that colour centre generation in the core glass network and the associated absorption in the visible range result from a cooperative effect involving simultaneous excitation of a cluster composed of several closely spaced Yb{sup 3+} ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of IR-emitting centres in Pb-doped silica fibres

The first fibre preforms with a Pb-doped silica core, free of other dopants, have been produced using chemical vapour deposition. The preforms have been used to fabricate holey optical fibres. The spectroscopic properties of the fibres have been studied in detail in the range 400 - 1700 nm: we have measured the optical loss, constructed a three-dimensional luminescence excitation - emission graph and determined the decay time for the major luminescence peaks.

36 MATERIALS SCIENCE↗

Spectral behaviour of bismuth centres in different steps of the FCVD process

The behaviour of bismuth ions in silica glass free of other dopants has been studied in different steps of the furnace chemical vapour deposition (FCVD) process. Porous layers annealed and consolidated in different atmospheres, a bismuth chloride solution in acetone for porous layer impregnation, the resultant glass preform and holey fibres drawn out under various conditions have been characterised by spectroscopic techniques and X-ray diffraction. Active bismuth centres present in the preform and luminescing in the visible and IR spectral regions persist during drawing under reducing conditions, whereas drawing under oxidising conditions eliminates such centres. Annealing under reducing conditions produces absorption bands of IR-emitting bismuth centres (IRBCs) in spectra of fibres drawn out under oxidising conditions and concurrently increases the background loss. Under the annealing conditions of this study (argon atmosphere, T{sub max} = 1100 Degree-Sign C, 30 min), the IRBC concentration reaches a maximum and then decreases, whereas the background loss increases monotonically. (fiber optics)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗