Search NASA⌕ Search

SEARCH · Search NASA

Results for “proof”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Dust-Proofing the Future: Materials Challenges for Lunar Exploration

As humanity expands its ventures into lunar exploration, the demand intensifies for materials capable of enduring extreme environmental and service conditions. The Moon’s surface presents numerous challenges, including ultra-high vacuum exposure, temperature extremes and intense radiation. Additionally, lunar regolith threatens component durability and reusability due to its abrasive nature. Lunar dust particles scoring, adhering or embedding into surfaces and within device-confined geometries, such as bearings, drive mechanisms and connectors, can cause premature component wear or failure. Furthermore, the interaction between the rocket plume and surface during vehicle landings and ascents creates severe erosive conditions near critical vehicle components and adjacent infrastructure. A key barrier hindering materials discovery for lunar dust tolerant applications is a lack of standard laboratory methods to evaluate material properties and performance under representative operating conditions. A case will be presented for research activities supporting identification, processing and characterization of candidate materials in conjunction with innovations in standardized testing and qualification. Results will highlight current and emerging test methods for simulating lunar dust exposure and component degradation, paving the way for a new generation of robust materials and coatings for space exploration.

lunar dust↗
DOE OSTI2024

Modeling and Proof-of-Concept of a Blackbody-Based Calibration Method in the InfraBREAD Detector

The Broadband Reflector Experiment for Axion Detection (BREAD) is an ongoing collaboration searching for the conversion of yet undiscovered axion-like dark matter particles to photons in the presence of a magnetic field. InfraBREAD, a pilot experiment realization of BREAD, uses a superconducting nanowire single photon detector (SNSPD), a high-efficiency and low-noise device, to specifically detect infrared-range photons produced by $\mathcal{O}$(eV) axion-like particles. The unique BREAD coaxial reflector setup allows for the focusing of converted signal photons to a 1mm $\times$ 1mm SNSPD. However, when the detector is cooled to cryogenic temperatures during operation, uneven thermal contraction of reflector components may lead to a small shift in the location of the focal spot. A novel calibration method using blackbody radiation is proposed to locate the true focal spot of the detector \textit{in situ}. Through ray tracing simulations done in FRED Optical Engineering Software, this method is demonstrated to locate the focus to within $\SI{50}{\micro\metre}$ in the axial dimension. Additionally, it is demonstrated that the blackbody photon source used in this calibration must be at a temperature of at least $\SI{15}{\kelvin}$ to $\SI{40}{\kelvin}$, depending on the sensitivity of the SNSPD.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Proof-of-Concept for Sensor Modeling in MOOSE for the Design of Autonomous Nuclear Reactor Control

Autonomous operation is essential for the deployment of microreactors and fission batteries, both in terrestrial and space applications. However, prototypes of microreactors and fission batteries do not exist yet, and even the design space has not been narrowed down conclusively, making the instrumentation and control system design difficult. For this reason, there is a need for flexible computational capabilities to create a numerical stand-in of potential microreactor and fission battery designs. The latter can be used to design and test control strategies to support autonomous operations. In this paper, we describe the initial implementation of a pluggable sensor system for the easy implementation of realistic sensor models in the multiphysics object-oriented simulation environment (MOOSE) framework. This new capability will enable MOOSE users to create a numerical stand-in of microreactors and fission batteries, ultimately allowing them to easily test new control algorithms, and instrumentation strategies for advanced systems in the design phase

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Proof-of-Concept for Sensor Modeling in MOOSE for the Design of Autonomous Nuclear Reactor Control

Autonomous operation is essential for the deployment of microreactors and fission batteries, both in terrestrial and space applications. For this reason, recent studies have investigated autonomous control by using adaptive model predictive control and multi-objective optimization for heat pipe–cooled microreactors under normal and heat pipe failure conditions. However, prototypes of microreactors and fission batteries do not exist yet, and even the design space has not been narrowed down conclusively, making the instrumentation and control system design difficult. For this reason, there is a need for flexible computational capabilities to create a numerical stand-in of potential microreactor and fission battery designs. The latter can be used to design and test control strategies to support autonomous operations. In this poster, we describe the initial implementation of a pluggable sensor system for the easy implementation of realistic sensor models in the multiphysics object-oriented simulation environment (MOOSE) framework. This new capability will enable MOOSE users to create a numerical stand-in of microreactors and fission batteries, ultimately allowing them to easily test new control algorithms, and instrumentation strategies for advanced systems in the design phase.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2005

Computing Gravitational Fields of Finite-Sized Bodies

A computer program utilizes the classical theory of gravitation, implemented by means of the finite-element method, to calculate the near gravitational fields of bodies of arbitrary size, shape, and mass distribution. The program was developed for application to a spacecraft and to floating proof masses and associated equipment carried by the spacecraft for detecting gravitational waves. The program can calculate steady or time-dependent gravitational forces, moments, and gradients thereof. Bodies external to a proof mass can be moving around the proof mass and/or deformed under thermoelastic loads. An arbitrarily shaped proof mass is represented by a collection of parallelepiped elements. The gravitational force and moment acting on each parallelepiped element of a proof mass, including those attributable to the self-gravitational field of the proof mass, are computed exactly from the closed-form equation for the gravitational potential of a parallelepiped. The gravitational field of an arbitrary distribution of mass external to a proof mass can be calculated either by summing the fields of suitably many point masses or by higher-order Gauss-Legendre integration over all elements surrounding the proof mass that are part of a finite-element mesh. This computer program is compatible with more general finite-element codes, such as NASTRAN, because it is configured to read a generic input data file, containing the detailed description of the finiteelement mesh.

Quadrelli, Marco↗
NASA NTRS1985

Tree-oriented interactive processing with an application to theorem-proving, appendix E

The concept of unstructured structure editing and ted, an editor for unstructured trees, is described. Ted is used to manipulate hierarchies of information in an unrestricted manner. The tool was implemented and applied to the problem of organizing formal proofs. As a proof management tool, it maintains the validity of a proof and its constituent lemmas independently from the methods used to validate the proof. It includes an adaptable interface which may be used to invoke theorem provers and other aids to proof construction. Using ted, a user may construct, maintain, and verify formal proofs using a variety of theorem provers, proof checkers, and formatters.

Hammerslag, David↗
NASA NTRS1947

Elastic Properties in Tension and Shear of High Strength Nonferrous Metals and Stainless Steel - Effect of Previous Deformation and Heat Treatment

A resume is given of an investigation of the influence of plastic deformation and of annealing temperature on the tensile and shear elastic properties of high strength nonferrous metals and stainless steels in the form of rods and tubes. The data were obtained from earlier technical reports and notes, and from unpublished work in this investigation. There are also included data obtained from published and unpublished work performed on an independent investigation. The rod materials, namely, nickel, monel, inconel, copper, 13:2 Cr-Ni steel, and 18:8 Cr-Ni steel, were tested in tension; 18:8 Cr-Ni steel tubes were tested in shear, and nickel, monel, aluminum-monel, and Inconel tubes were tested in both tension and shear. There are first described experiments on the relationship between hysteresis and creep, as obtained with repeated cyclic stressing of annealed stainless steel specimens over a constant load range. These tests, which preceded the measurements of elastic properties, assisted in devising the loading time schedule used in such measurements. From corrected stress-set curves are derived the five proof stresses used as indices of elastic or yield strength. From corrected stress-strain curves are derived the secant modulus and its variation with stress. The relationship between the forms of the stress-set and stress-strain curves and the values of the properties derived is discussed. Curves of variation of proof stress and modulus with prior extension, as obtained with single rod specimens, consist in wavelike basic curves with superposed oscillations due to differences of rest interval and extension spacing; the effects of these differences are studied. Oscillations of proof stress and modulus are generally opposite in manner. The use of a series of tubular specimens corresponding to different amounts of prior extension of cold reduction gave curves almost devoid of oscillation since the effects of variation of rest interval and extension spacing were removed. Comparison is also obtained between the variation of the several properties, as measured in tension and in shear. The rise of proof stress with extension is studied, and the work-hardening rates of the various metals evaluated. The ratio between the tensile and shear proof stresses for the various annealed and cold-worked tubular metals is likewise calculated. The influence of annealing or tempering temperature on the proof stresses and moduli for the cold-worked metals and for air-hardened 13:2 Cr-Ni steel is investigated. An improvement of elastic strength generally is obtained, without important loss of yield strength, by annealing at suitable temperature. The variation of the proof stress and modulus of elasticity with plastic deformation or annealing temperature is explained in terms of the relative dominance of three important factors: namely, (a) internal stress, (b) lattice-expansion or work-hardening, and (c) crystal reorientation. Effective values of Poisson's ratio were computed from tensile and shear moduli obtained on tubular specimens. The variation of Poisson's ratio with plastic deformation and annealing temperature is explained in terms of the degree of anisotropy produced by changes of (a) internal stress and (b) crystal orientation.

METALS - ELASTICITY↗
NASA NTRS2003

Offset of a Drag-Free Sensor from the Center of Gravity of Its Satellite

The drag-free satellite is one that encloses a proof mass, shielding it from atmospheric drag and solar radiation pressure (SRP). By sensing the location of the proof mass in the body and using thrusters to force the spacecraft to follow the proof mass in a closed-loop fashion, the effects of drag and SRP may be eliminated from the spacecraft orbit. Thus, several benefits may be gained, including improved ephemeris propagation and reduced operational costs. The package including the proof mass and the location sensing equipment may be considered as a single sensor; if generalized, such a sensor could be manufactured and used more easily in satellite designs, similar to how current missions use, for example, rate gyros and magnetometers. The flight heritage of the technology has been such that the proof mass sensor is a primary facet of the mission, allowing it to dominate design considerations. In particular, this paper discusses the effects that may be expected if a generalized drag-free sensor is placed some distance away from the spacecraft center of gravity. The proof mass will follow a given gravitational orbit, and a separation from the spacecraft center of gravity places the spacecraft itself in a different orbit from the proof mass, requiring additional fuel just to maintain function of the drag- free sensor. Conclusions include some guiding principles for determining whether certain mission characteristics may restrict or preclude the use of drag-free sensors for that mission. These principles may be used both by mission planners considering drag-free missions and by hardware designers considering or pursuing the development of such generalized sensors.

Starin, Scott R.↗
NASA NTRS2004

Synthesizing Safety Conditions for Code Certification Using Meta-Level Programming

In code certification the code consumer publishes a safety policy and the code producer generates a proof that the produced code is in compliance with the published safety policy. In this paper, a novel viewpoint approach towards an implementational re-use oriented framework for code certification is taken. It adopts ingredients from Necula's approach for proof-carrying code, but in this work safety properties can be analyzed on a higher code level than assembly language instructions. It consists of three parts: (1) The specification language is extended to include generic pre-conditions that shall ensure safety at all states that can be reached during program execution. Actual safety requirements can be expressed by providing domain-specific definitions for the generic predicates which act as interface to the environment. (2) The Floyd-Hoare inductive assertion method is refined to obtain proof rules that allow the derivation of the proof obligations in terms of the generic safety predicates. (3) A meta-interpreter is designed and experimentally implemented that enables automatic synthesis of proof obligations for submitted programs by applying the modified Floyd-Hoare rules. The proof obligations have two separate conjuncts, one for functional correctness and another for the generic safety obligations. Proof of the generic obligations, having provided the actual safety definitions as context, ensures domain-specific safety of program execution in a particular environment and is simpler than full program verification.

Eusterbrock, Jutta↗
NASA NTRS2005

Two-Step Laser Ranging for Precise Tracking of a Spacecraft

A document proposes a two-step laser ranging technique for precise tracking of a coasting interplanetary spacecraft to determine the degree to which leakage of fuel, solar wind, and/or solar-radiation pressure causes it to deviate from a purely gravitational trajectory. Such a determination could contribute to the precision of a test of a theory of gravitation. In the technique, a proof mass would be released from the spacecraft. By use of laser ranging equipment on the spacecraft and retroreflectors attached to the proof mass, the relative position of the spacecraft and proof mass would be determined. Meanwhile, the position of the spacecraft relative to the Earth would be determined by ranging by use of a laser transponder. The vector sum of the two sets of ranging measurements would be the position of the proof mass relative to the Earth. Unlike the acceleration of the spacecraft, the acceleration of the proof mass should not include a residual component attributable to leakage of fuel. In addition, the effects of solar radiation and solar wind on the proof mass could be minimized by releasing the proof mass into the shadow of the spacecraft.

Chui, Talso↗
NASA NTRS1993

Verification of fault-tolerant clock synchronization systems

A critical function in a fault-tolerant computer architecture is the synchronization of the redundant computing elements. The synchronization algorithm must include safeguards to ensure that failed components do not corrupt the behavior of good clocks. Reasoning about fault-tolerant clock synchronization is difficult because of the possibility of subtle interactions involving failed components. Therefore, mechanical proof systems are used to ensure that the verification of the synchronization system is correct. In 1987, Schneider presented a general proof of correctness for several fault-tolerant clock synchronization algorithms. Subsequently, Shankar verified Schneider's proof by using the mechanical proof system EHDM. This proof ensures that any system satisfying its underlying assumptions will provide Byzantine fault-tolerant clock synchronization. The utility of Shankar's mechanization of Schneider's theory for the verification of clock synchronization systems is explored. Some limitations of Shankar's mechanically verified theory were encountered. With minor modifications to the theory, a mechanically checked proof is provided that removes these limitations. The revised theory also allows for proven recovery from transient faults. Use of the revised theory is illustrated with the verification of an abstract design of a clock synchronization system.

Miner, Paul S.↗