Search NASA⌕ Search

SEARCH · Search NASA

Results for “reactor experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Multiphysics Analysis of the MSRE Experiment Using Griffin-SAM Coupled Code System

Molten salt reactors (MSRs) with flowing fuel have the unique feature of utilizing the fuel salt for heat generation and extraction at the same time since the fuel salt is circulating through the whole primary loop of the reactor. This movement of the fuel salt results in a partial decay of the delayed neutron precursors (DNPs) outside the core and corresponding redistribution in the active core region. To capture this phenomenon accurately, neutronics and thermal hydraulics computational tools need to be modified to handle the movement of the DNPs and their decay. Idaho and Argonne National Laboratories are actively working on developing neutronics and thermal hydraulics tools to model MSRs with flowing fuel. The neutronics code Griffin and the thermal hydraulics code SAM were extended to handle flowing fuel with the drift of the DNPs under the MOOSE framework. In this work, a simplified Multiphysics model of the Molten Salt Reactor Experiment (MSRE) is developed and utilized to perform steady-state and transient analyses. The MSRE experiments were designed to show the impact of the DNPs losses on core reactivity. The following section provides a description of the MSRE experiment with the core main parameters used to develop the model. Then, the developed Multiphysics model of the MSRE is presented. Finally, steady-state verification tests and unprotected loss of flow transient tests are discussed followed by a summary and conclusions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Manufacturing of Printed Melt Wire Chips for Cheap, Compact Passive In-Pile Temperature Sensors

Melt wires are a passive sensor used to determine peak temperatures during a test. Traditional melt wires are commonly used in test reactor experiments such as in the Advanced Test Reactor (ATR). However, the conditions within a reactor present significant challenges towards test design due to space limitations and the harsh environment. For example, some test capsules have only a couple millimeters in diameter available for instrumentation, which is too small to accommodate a traditional melt wire package, and they are ultimately filled to capacity when they are immersed in molten metal. To enable instrumentation for space limited applications, peak temperature sensing capabilities paired with additive manufacturing options have been utilized to develop printed melt wires for peak irradiation temperature detection. Here, we report on the fabrication of miniaturized melt wire chips with a melting temperature ~960 °C with printed silver nanoparticle ink. This study will advance the development of unique temperature sensors capable of sensing user specified temperature ranges within the harsh environment of irradiation testing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Assessment of Near-Term Fuel Screening and Qualification Needs for Nuclear Thermal Propulsion Systems

Nuclear thermal propulsion (NTP) is an in-space propulsion technology capable of both high specific impulse (850–1000 s) and thrust (44–1112 kN), which can help reduce trip times for crewed missions beyond low Earth orbit. NTP technology has been demonstrated during historic programs. Over 20 ground test reactor experiments were performed, which demonstrated the prototypic reactor operations, during the Nuclear Engine for Rocket Vehicle Application (NERVA)/Rover program (1955–1972). Although historical programs have shown that NTP is a viable in-space propulsion technology, developing NTP in modern programs is contingent on the development and qualification of ultrahigh-temperature nuclear fuel technologies that can withstand engine operating conditions. In historical NTP development programs such as NERVA/Rover, prototypic reactor/engine schemes were ground tested to assess the overall system feasibility and to qualify the reactor fuel forms for eventual flight systems. Although this approach is effective to verify fuel performance under prototypic conditions, relying solely on full-scale NTP reactor tests as the pathway for verifying or qualifying fuel is inefficient and cost prohibitive today. Additionally, modern nuclear licensing requirements state that before test reactor approval, reactor components and fuel elements should be qualified via non-nuclear (out-of-pile) and nuclear (in-pile) testing under representative operating conditions. Using this methodology, fuel matures as production scale fabrication methods are established, and as produced fuel performance is demonstrated. Here, this paper provides an overview of historical approaches to NTP fuel performance maturation, including fuel screening and qualification needs, and provides insight for establishing an efficient testing paradigm that can be implemented to rapidly and affordably develop NTP fuel forms for eventual qualification.

42 ENGINEERING↗

Electrochemical Property Determination of Fission Product Elements in Molten Fluoride Salt

The fluoride salt-cooled high temperature reactor (FHR) is a developing nuclear reactor concept that combines many attractive features of previous reactor designs. The FHR concept is also a technological bridge between today's light water reactors (LWRs) which use solid fuel and water coolant, to future technologies that utilize liquid salt coolant and dissolved liquid fuel. The FHR concept incorporates low-pressure liquid fluoride salt, tri-structural isotropic (TRISO) coated particle fuel, and an entirely passive decay heat removal system. FHRs operating at very high temperatures increase the thermal energy transfer and subsequently thermal efficiency. Similar to LWRs, the FHR will feature a cleanup system that performs online processing of the primary coolant in order to mitigate contamination from leaking fuel and moisture. Due to its ionic liquid properties, molten salts can be controlled with various applications of electrochemical properties. Oak Ridge National Laboratory (ORNL) studied these applications greatly during the Molten Salt Reactor Experiment (MSRE) and the Molten Salt Breeder Reactor (MSBR) concept during the 1960's and 70's; however, many technology gaps exist in terms of online salt processing for the FHR. The purpose of this research is to identify the electrochemical properties of leaking fission products as well as contamination from moisture in the system. These properties have been thoroughly studied for molten chloride salts but not as much data is reported for behavior in fluoride salts. Before a cleanup system can be proposed for the FHR concept, these properties will need to be extensively investigated to generate a reliable source of electrochemical data. These results are gathered through an electrochemical system which probes the molten salt at high temperatures (up to 750 deg. C). (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

INITIAL UC Davis Reactor Analysis Context

The INITIAL reactor experiment pitched to UC Davis and agreed upon by the professor teaching the course is a natural uranium neutron activation experiment in the McClellan Nu- clear Research Center (MNRC) reactor. Both non-cadmium covered (Ex:1 – bare) and cadmium covered (Ex:2 – Cd) experiments will be performed and analysis will ensure on gamma spectra collected from both experiments. The following provides necessary information for completing the experiment analysis. This information includes definitions, assumptions, and plots tailored to the specifics of this experiment. The content is for the students to be completing the laboratory for reference.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

AGC-2 Specimen Position Adjustment

This engineering calculations and analysis report (ECAR) calculates the Advanced Graphite Creep (AGC)-2 specimen position adjustments that result from (1) as-built dimension corrections of the Advanced Test Reactor (ATR) reactor, experiment, and specimens, (2) thermal growth of the capsule wall and graphite components, and (3) variable specimen elevations as the specimen stacks shrink due to radiation -induced shrinkage and axial load- induced creep. The specimen elevations listed in the experiment assembly documents do not accurately represent the actual specimen positions in relation to the reactor core mid-plane. Prior experiment insertion difficulties have shown that the distance from the reactor top head closure plate to the core is greater than the nominal elevations shown on the ATR facility drawings. Drawing 600001 lists the measured difference between the closure plate and the gearbox support beam as 0.313 in.ches greater than the facility drawings. Thus, the height of the specimens in relation to the core mid-plane is 0.313 in.ches higher than the nominal dimensions. AlsoIn addition, the overall dimension of the experiment is 0.084 in. shorter than the nominal drawing dimension on Drawing 601266 [1]. As a further adjustment, the average weld shrinkage of the three capsule welds is 0.035 each, which affects the as-built position of the lower isolation weld plate (i.e., Part #601266-9) onto which all graphite components are stacked. In addition to the as-built adjustments mentioned above, the specimens also are subject to a stack up error, which is due to their the thickness difference from nominal. This effect is most apparent in the center S-7 stack which that has a large number of specimens (i.e., 170 specimens). Per post-irradiation examination (PIE) measurements, the average S-7 specimen is about 0.0008 in. smaller than nominal. Even though this difference is small, when multiplied by the number specimens, the top specimen experiences an elevation reduction of 0.14 inches. Although dimensional changes were less pronounced in S-1 through S-6, specimen elevations were adjusted based on pre-irradiation length measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Non-standard neutrino interactions in reactor and superbeam experiments

We study the performance of reactor and superbeam neutrino experiments in the presence of non-standard neutrino interactions. We find that for some non-standard terms, the two experiments would yield conflicting result in the {theta}{sub 13} determination, while in other case, they may agree well with each other, but the resulting value for {theta}{sub 13} could indicate a wrong value. Throughout our discussion, we pay attention to the impact of the complex phases of NSI parameters and the observation at the near detector. This presentation is based on Ref. [1].

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

INITIAL Reactor Laboratory Irradiation Safety Calculations

The INITIAL reactor experiment being pitched to UC Davis and agreed upon by the professor teaching the course is a natural uranium neutron activation experiment in the McClellan Nuclear Research Center (MNCR) reactor. Due to the complex nature of the build up and decay of fission products in nuclear fuel, and the subsequent variety of radiation emitting nuclides, the following dose calculations are provided to ensure the safety of the experiment. These calculations are performed for both non-cadmium covered (Ex:1 - bare) and cadmium covered (Ex:2 - Cd) neutron irradiated UO 2 samples.

61 RADIATION PROTECTION AND DOSIMETRY↗

SAM Enhancements and Model Developments for Molten-Salt-Fueled Reactors

To support the development and utilization of the SAM code for molten-salt-fueled reactor (MSR) safety analysis and licensing, an effort was devoted to enhancing code capabilities and developing reference models for the MSR primary loop. A reference standard problem of a prototypical reactor design is foundational to NRC to verify the adequacy of computer codes and evaluation models for a specific reactor type. A thermo-fluid model of the Molten Salt Reactor Experiment (MSRE) has been developed. The MSRE primary loop model consists of a 2-D core region and external core components in 1-D or 0-D. Both the steady-state and a transient scenario are simulated. The porous medium model is utilized for both the molten salt fluid channels and the moderator matrix in the MSRE core. The use of the porous medium model for the MSRE core is verified with the higher-fidelity simulation results using 1-D representations of the fluid channels and 3-D modeling of core structures. To further enhance SAM multi-scale simulation capabilities for MSRs, a mass transport model is developed and implemented in SAM multi-dimension flow module for modeling of species transport such as delayed neutron precursors in MSRs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Activation of Thermal Insulation and Contamination Prevention

The goals of this paper are to enhance the understanding of the potential activation and contamination hazards from the use of insulating materials in the Molten Chloride Reactor Experiment and to foster safer work environments through informed decision-making and strategic planning. It was written to resolve a gating comment from the core heating system preliminary design review. The largest dose expected from the considered insulation materials is about 0.1 mrem per year from Pyrogel. Although Cerablanket stood out among the insulation materials for encouraging ALARA practices, it has a higher thermal conductivity. At low power levels, focusing on reducing the generation of dust from ERD activities may be more effective for reducing the potential spread of contamination than changing the insulating material type. However, regardless of the material chosen, PPE and safety conscious procedural practices can help reduce the production and spread of activated dust––thus minimizing the radiological hazard to workers.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

Flow Reactor Study and Kinetic Model Development of HEFA-SPK and its Surrogate

In this work, we formulate a two-component surrogate for HEFA-SPK, incorporating aromatic or cycloalkane components, and develop reduced kinetic models for the surrogates to be used in high-performance computing simulations. The HEFA-SPK surrogate was selected and optimized based on the fuel's physical and combustion properties, including ignition delay times and flame speeds. The resulting surrogate consists of 40% n-undecane and 60% 2-methylnonane. The surrogate was confirmed by flow reactor experiments for both the HEFA-SPK fuel and the suggested two-component surrogates, where excellent agreement was observed. To meet aromatic requirements, 1,2,4-trimethylbenzene (8%) was selected, and we determined that incorporating 30% propylcyclohexane into the HEFA-SPK will achieve a volume swell equivalent to 8% aromatics. The properties of the surrogates were measured, and a new reduced kinetic model was developed based on the semi-decoupling methodology, using a reduced CH4 chemistry from NUIG 1.0 as base chemistry. Kinetic models will be employed in combustor simulations to enable a comprehensive understanding of the effect of SAF fuel properties on aviation combustor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observed Changes in As-Fabricated U-10Mo Monolithic Fuel Microstructures After Irradiation in the Advanced Test Reactor

A low-enriched uranium U-10Mo monolithic nuclear fuel is being developed by the Material Management and Minimization Program, earlier known as the Reduced Enrichment for Research and Test Reactors Program, for utilization in research and test reactors around the world that currently use high-en-riched uranium fuels. As part of this program, reactor experiments are being performed in the Advanced Test Reactor. It must be demonstrated that this fuel type exhibits mechanical integrity, geometric stability, and pre-dictable behavior to high powers and high fission densities in order for it to be a viable fuel for qualification. This paper provides an overview of the microstructures observed at different regions of interest in fuel plates before and after irradiation for fuel samples that have been tested. These fuel plates were fabricated using laboratory-scale fabrication methods. Observations regarding how microstructural changes during irradiation may impact fuel performance are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Results of Recent Microstructural Characterization of Irradiated U-Mo Dispersion Fuels with Al Alloy Matrices that Contain Si

RERTR U-Mo dispersion fuel plates are being developed for application in research reactors throughout the world. As part of this development, reactor experiments are being conducted in the Advanced Test Reactor to determine the irradiation performance of different dispersion fuels that contain U-Mo alloys with different Mo contents and Al alloy matrices with different Si contents. Of particular interest is the performance of the dispersion fuels depending on the Si content of the Al alloy matrix, since the addition of Si is being looked to for improving the performance of these dispersion fuels. This paper will describe the results of recent microstructural examinations that have been performed using optical metallography and scanning electron microscopy on as-fabricated and as-irradiated dispersion fuels with different amounts of Si added to the Al matrix. Differences in the microstructural development during irradiation as a function of the Si content in the Al matrix will be discussed, and comments will be made about the development and stability of the fuel/matrix interaction layers that are commonly present in irradiated dispersion fuels.

99 GENERAL AND MISCELLANEOUS↗

Sensitivity of ATF Experiments in the Center Flux Trap of the Advanced Test Reactor to Adjacent Experiments

Irradiation experiments conducted in the Idaho National Laboratory’s Advanced Test Reactor are typically assumed to have little effect on one another. This assumption does not hold true for certain experiments in close proximity. To evaluate the impacts on safety and programmatic parameters of experiments in the center flux trap, the contents of the adjacent H and inner-A positions were modeled with a range of possible irradiation targets. First, neutron flux maps with experiments in those positions were compared against a baseline configuration. Next, several safety and programmatic parameters for a generic accident-tolerant fuel test train were calculated. It was shown that these parameters can exhibit considerable sensitivity to the contents of the H and A experiment positions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Criticality Safety SU based USL Calculation for UCl3-NaCl Fuel Salt Operations

The Molten Chloride Reactor Experiment (MCRE) is a fast spectrum, molten salt fueled reactor that is planned to be constructed and operated in the Laboratory for Operation and Testing in the U.S. (LOTUS) testbed, formerly known as the ZPPR cell, at Idaho National Laboratory (INL). MCRE will provide valuable data to support design, licensing, and operation of full scale commercialized molten salt reactor designs.

99 - GENERAL AND MISCELLANEOUS↗

Initial steady-state core simulation capability or thermal and pool-type molten salt reactors, coupling reactor physics, thermal-hydraulics, and evolving chemistry

This report presents the development and validation of an initial steady-state multiphysics capability for molten salt reactors (MSRs) under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in Fiscal Year 2025. The framework integrates neutronics, thermal-hydraulics, species transport, and thermochemistry to capture the coupled dynamics of liquid-fueled systems. Implementation and testing were performed on two representative designs: the Molten Salt Reactor Experiment (MSRE), a thermal-spectrum, channeled-flow reactor, and the Lotus Molten Salt Reactor (L-MSR), a fast-spectrum, pool-type reactor. The modeling suite employs Griffin for reactor physics and depletion, Pronghorn and SAM for thermal-hydraulics, Thermochimica for chemistry, and Saline for thermophysical properties, with benchmarking and validation carried out against historical MSRE data, experimental flow-loop measurements, and reference depletion calculations from Monte Carlo codes. The framework demonstrated the ability to reproduce key reactor behaviors including temperature feedback, reactivity losses, delayed neutron precursor transport, xenon poisoning, and redox potential evolution. The results confirm the feasibility and accuracy of the coupled models in predicting steady-state and selected transient MSR behaviors. This latter ones are used in this report as a proxy indicating that the steady-state models from which the transient starts are accurate. For MSRE, validation showed good agreement with pump start-up and natural circulation tests, while for the L-MSR, benchmarking confirmed hydraulic calibration and consistency of neutronics–thermal coupling. The tools also provided new insights into species transport, noble metal deposition, and salt solidification dynamics. On the Xenon transport front, the code is validated against the steady state Xenon poisoining measurement and showed good agreement with the experimental value. Identified areas for future work include advanced void transport modeling, three-dimensional simulations, improved alloy corrosion models, and tighter integration with high-fidelity Monte Carlo codes. These developments provide a foundation for high-fidelity MSR simulations that can support reactor design optimization, safety assessments, and long-term operational strategies.

42 - ENGINEERING↗

Irradiation of the First Advanced Gas Reactor Fuel Development and Qualification Experiment in the Advanced Test Reactor

The United States Department of Energy’s Advanced Gas Reactor (AGR) Fuel Development and Qualification Program will be irradiating eight separate tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States. The ATR has a long history of irradiation testing in support of reactor development and the INL has been designated as the United States Department of Energy’s lead laboratory for nuclear energy development. These AGR fuel experiments will be irradiated over the next ten years to demonstrate and qualify new particle fuel for use in high temperature gas reactors. The experiments, which will each consist of six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control for each capsule. The swept gas will also have on-line fission product monitoring to track performance of the fuel in each individual capsule during irradiation. The design of the first experiment (designated AGR-1) was completed in 2005, and the fabrication and assembly of the test train as well as the support systems and fission product monitoring system that monitor and control the experiment during irradiation were completed in September 2006. The experiment was inserted in the ATR in December 2006, and is serving as a shakedown test of the multi-capsule experiment design that will be used in the subsequent irradiations as well as a test of the early variants of the fuel produced under this program. The experiment test train as well as the monitoring, control, and data collection systems are discussed and the status of the experiment is provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhanced geometric capabilities for the transient analysis code T-ReX and its application to simulating TREAT experiments

Here, advances in computational architecture have prompted a resurgence in the simulation of reactor transients from first principles. Most codes are unable to simulate transient events with complex models, and require numerous approximations. The code T-ReX (Transient-Reactor eXperiment simulator), an extensive update to TDKENO, has been developed as a transient analysis tool with few geometric limitations and minimal theoretical approximations. T-ReX achieves this by employing the Improved Quasi-Static (IQS) method to solve the time dependent Boltzmann transport equation with explicit representation of delayed neutrons. The primary change in T-ReX relative to TDKENO is the incorporation of a modified version of the Monte Carlo code KENO-VI to calculate the flux shape and model the geometry of a problem. Using KENO-VI to model systems allows exact representation of the geometry. The changes to T-ReX are verified by comparison of solutions to computational benchmark problems found with a previous version of TDKENO that made use of KENO V.a, and several other codes with time-dependent capabilities. In addition, a three-dimensional model of the Transient Reactor Test Facility (TREAT) core at the Idaho National Laboratory (INL) is constructed with KENO-VI, and used to validate T ReX. T-ReX produces results that agree with benchmark problems, and are in better agreement with TREAT experimental data than TDKENO.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗