Search NASA⌕ Search

SEARCH · Search NASA

Results for “relative phase angle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Discovery of a 4.2 hour X-ray period in GX 9+9

The low-mass X-ray binary GX 9+9 (4U 1728-16) was observed during September 13-19, 1977, and March 11-17, 1978, with the HEAO A-1 instrument in scanning mode. An algorithm for detecting periodicities in the resulting light curves has been applied; it is based on the Scargle periodogram and takes into account the non-Gaussian nature of the intrinsic source variability. A 4.19 + or - 0.02 hr periodic modulation is detected in the September 1977 data. The folded light curve shows sinusoidal modulation with an amplitude of 3.8 percent. This amplitude is comparable to the 4.6 percent residual intrinsic source variability at all phases of the light curve. The 4.19 hr period is interpreted as the binary period of the system. The lack of eclipses and the sinusoidal light curve imply that the binary system is viewed at a low inclination angle of less than about 63 deg. Light curves of this type may be relatively common among low-mass X-ray binaries, but are difficult to detect without the long observations and high sensitivity possible with HEAO A-1.

Hertz, Paul↗
NASA NTRS1996

Means for Positioning and Repositioning Scanning Instruments

A method is presented for positioning a scanning instrument to point toward the center of the desired scan wherein the scan is achieved by rotating unbalanced masses (RUMs) rotating about fixed axes of rotation relative to and associated with the instrument, the RUMs being supported on drive shafts spaced from the center of the mass of the instrument and rotating 180 degrees out-of-phase with each other and in planes parallel to each other to achieve the scan. The elevation and cross-elevation angles of the instrument are sensed to determine any offset and offset time rate-of-change, and the magnitude and direction are converted to a RUM cycle angular velocity component to be superimposed on the nominal velocity of the RUMs. This RUM angular velocity component modulates the RUM angular velocity to cause the speed of the RUMs to increase and decrease during each revolution to drive the instrument toward the desired center of the scan.

Polites, Michael E.↗
NASA NTRS2016

Characterization of the High-Albedo NEA 3691 Bede

Characterization of NEAs provides important inputs to models for atmospheric entry, risk assessment and mitigation. Diameter is a key parameter because diameter translates to kinetic energy in atmospheric entry. Diameters can be derived from the absolute magnitude, H(PA=0deg), and from thermal modeling of observed IR fluxes. For both methods, the albedo (pv) is important - high pv surfaces have cooler temperatures, larger diameters for a given Hmag, and shallower phase curves (larger slope parameter G). Thermal model parameters are coupled, however, so that a higher thermal inertia also results in a cooler surface temperature. Multiple parameters contribute to constraining the diameter. Observations made at multiple observing geometries can contribute to understanding the relationships between and potentially breaking some of the degeneracies between parameters. We present data and analyses on NEA 3691 Bede with the aim of best constraining the diameter and pv from a combination of thermal modeling and light curve analyses. We employ our UKIRT+Michelle mid-IR photometric observations of 3691 Bede's thermal emission at 2 phase angles (27&43 deg 2015-03-19 & 04-13), in addition to WISE data (33deg 2010-05-27, Mainzer+2011). Observing geometries differ by solar phase angles and by moderate changes in heliocentric distance (e.g., further distances produce somewhat cooler surface temperatures). With the NEATM model and for a constant IR beaming parameter (eta=constant), there is a family of solutions for (diameter, pv, G, eta) where G is the slope parameter from the H-G Relation. NEATM models employing Pravec+2012's choice of G=0.43, produce D=1.8 km and pv≈0.4, given that G=0.43 is assumed from studies of main belt asteroids (Warner+2009). We present an analysis of the light curve of 3691 Bede to constrain G from observations. We also investigate fitting thermophysical models (TPM, Rozitis+11) to constrain the coupled parameters of thermal inertia (Gamma) and surface roughness, which in turn affect diameter and pv. Surface composition can be related to pv. This study focuses on understanding and characterizing the dependency of parameters with the aim of constraining diameter, pv and thermal inertia for 3691 Bede.

Wooden, Diane H.↗
NASA NTRS2016

Characterization of the High-Albedo NEA 3691 Bede

Characterization of NEAs provides important inputs to models for atmospheric entry, risk assessment and mitigation. Diameter is a key parameter because diameter translates to kinetic energy in atmospheric entry. Diameters can be derived from the absolute magnitude, H(PA=0deg), and from thermal modeling of observed IR fluxes. For both methods, the albedo (pv) is important - high pv surfaces have cooler temperatures, larger diameters for a given Hmag, and shallower phase curves (larger slope parameter G). Thermal model parameters are coupled, however, so that a higher thermal inertia also results in a cooler surface temperature. Multiple parameters contribute to constraining the diameter. Observations made at multiple observing geometries can contribute to understanding the relationships between and potentially breaking some of the degeneracies between parameters. We present data and analyses on NEA 3691 Bede with the aim of best constraining the diameter and pv from a combination of thermal modeling and light curve analyses. We employ our UKIRT+Michelle mid-IR photometric observations of 3691 Bede's thermal emission at 2 phase angles (27&43 deg 2015-03-19 & 04-13), in addition to WISE data (33deg 2010-05-27, Mainzer+2011). Observing geometries differ by solar phase angles and by moderate changes in heliocentric distance (e.g., further distances produce somewhat cooler surface temperatures). With the NEATM model and for a constant IR beaming parameter (eta=constant), there is a family of solutions for (diameter, pv, G, eta) where G is the slope parameter from the H-G Relation. NEATM models employing Pravec+2012's choice of G=0.43, produce D=1.8 km and pv≈0.4, given that G=0.43 is assumed from studies of main belt asteroids (Warner+2009). We present an analysis of the light curve of 3691 Bede to constrain G from observations. We also investigate fitting thermophysical models (TPM, Rozitis+11) to constrain the coupled parameters of thermal inertia (Gamma) and surface roughness, which in turn affect diameter and pv. Surface composition can be related to pv. This study focuses on understanding and characterizing the dependency of parameters with the aim of constraining diameter, pv and thermal inertia for 3691 Bede.

magnitude↗
DOE OSTI2022

Lamellae of α phase in a metastable β -Ti alloy studied by small-angle x-ray scattering

The shapes and orientations of lamellae of the hexagonal close-packed α phase in single crystals of the body-centred cubic β phase in a metastable β -Ti alloy (Timetal LCB) were investigated by synchrotron small-angle x-ray scattering. Several steps of thermal treatment with various annealing times and temperatures were employed. The measured scattering data were fitted to a model of ellipsoidal lamellae of random sizes, and the mean lamella shapes and orientations of their axes with respect to the β -Ti matrix were determined from the fit. The number and relative volume of the lamellae were estimated from the integrated scattered intensity. The elastic energy of the lamellae as well as the energy of defects at the α / β interface (misfit dislocations) were calculated from the parameters of the lamellae. In conclusion, the results provide information on the kinetics of the β $ \rightarrow$ α transformation in metastable β -Ti alloys and allow assessing the degree of thermodynamic equilibrium of the final α / β composite.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Minor planets and related objects. XXIX - Asteroid 29 Amphitrite

UBV photometry and lightcurves of asteroid 29 Amphitrite from all observed apparitions (March 1956-May 1977) are combined to obtain a phase function having a linear phase coefficient of 0.030 + or - 0.002 mag/deg and a mean absolute magnitude of 6.19 + or - 0.04. Amphitrite displays a reddening of its B - V color index with increasing solar phase angle: 0.816 + or - 0.004 at a phase angle of 2 deg and 0.848 + or - 0.004 at 23 deg. Since Amphitrite's orbital inclination is low (6 deg) and its lightcurve amplitudes range between 0.06 and 0.11 mag, and are well distributed in longitude, it is concluded that the obliquity of its pole is significantly different from zero. During some apparitions Amphitrite's light curves display only one maximum and minimum per 5.3904 + or - 0.007-hr rotation period while in others as many as five of each are present. This is interpreted to mean that Amphitrite has a quasi-spherical shape with a highly irregular and/or variegated surface.

Tedesco, E. F.↗
DOE OSTI2020

Non-contact electrochemical evaluation of biofilms

Abstract Here, we demonstrate a non-contact technique for electrochemical evaluation of biofilms on surfaces in relation to corrosion. Electrochemical impedance spectrometry was employed, incorporating flat patterned electrodes positioned over the surfaces of aluminum and glass with and without biofilms. Signal communication from the working electrode to the counter electrode followed electric field lines passing tangentially through the biofilms. Electrochemical impedance parameters that were evaluated included complex impedance, phase angle, imaginary (out of phase) conductivity and Cole–Cole plots with a corresponding equivalent circuit. Changes in the impedance properties due to the presence of biofilms were monitored and correlated through microbiological, chemical and electrochemical assays. Impedance parameters associated with microbial activity correlated with biofilms on aluminum and glass surfaces. This technical approach provides impedance information about the biofilm without the signal traveling through the underlying conductive media or disrupting the biofilm. In this way, biological contributions to surface fouling can be evaluated with minimal contribution from the inorganic surface under the biofilm. In addition, this technique can be used to monitor biofilms on electrochemically inert surfaces as well as electrically conductive surfaces. Graphic abstract

Turick, Charles E. (ORCID:0000000307815846)↗
DOE OSTI2022

Impact of the optical parametric amplification phase on laser pulse compression

Optical parametric chirped-pulse amplification (OPCPA) is an effective way to generate ultrashort pulses that has been used extensively for a variety of applications requiring high peak intensities. Precise control and measurement of a system’s spectral and spatial phases are required for Fourier transform–limited pulse compression and diffraction-limited focusing. Phase accumulated during optical parametric amplification (OPA) can degrade the compressibility and focusability of the pulse, reducing peak intensity. We used analytic and numerical analysis of OPA to study the influence of crystal parameters, wavefront of the pump and signal, and their relative optical alignment on the accumulated phase. Here, we show that the accumulated signal phase is largely independent of amplifier saturation and, with significant local wavefront gradients in the signal or pump beam, the quality of the compressed pulses can be degraded. We use first-order expressions for the pump- and signal-angle sensitivity to evaluate an OPCPA system consisting of a highly deuterated potassium dihydrogen phosphate (DKDP) amplifier designed to support bandwidth for 15 fs pulses centered at 920 nm.

47 OTHER INSTRUMENTATION↗
NASA NTRS1987

Mercury - Wavelength and longitude dependence of polarization

The polarization-time variations noted in the present linear polarization observations of the integrated Mercury disk, with filters covering the 0.3-1.0 micron bandpass and between 53-130 deg of phase angle, may be accounted for in terms of longitude dependence through the variation of brightness or other properties over the surface. Kepler's equation for the eccentric anomaly was solved for each observation, and the true anomaly was used to find the subsolar longitude. The difference found in the polarization-albedo relations of Mercury and the moon indicates a difference in surface texture and/or composition.

Gehrels, T.↗
DOE OSTI2025

Nanoscale structural evolution and phase transformation of geopolymers: In situ SAXS/WAXS investigation under uniaxial tension at elevated temperatures

This investigation delves into the degradation mechanisms of high-density polyethylene geomembranes (PE GMXs) under a spectrum of conditions, replicating real-world scenarios within a rigorously controlled laboratory setting. The treatment protocols applied induced a notable increase in the crystallinity of the treated specimens relative to the untreated controls. Small-angle x-ray scattering (SAXS) analysis identified an initial long period (interlamellar distance) of 16.9 nm for the untreated polymer, which expanded by 19.5% at a strain of 16.7 percent. Conversely, the treated PE GMXs exhibited a more gradual elongation of the long period, with an increase of merely 10.6% at a strain of 23.3 percent. At an elevated temperature of 65°C, both samples exhibited pronounced strain hardening, with the treated PE GMXs demonstrating superior stability even at a strain of 150 percent. Wide-angle x-ray scattering (WAXS) experiments corroborated these observations, revealing that the diffraction patterns of the untreated PE remained stable up to a strain of 16.7%, whereas those of the treated PE remained distinct up to a strain of 46.1 percent. Scanning electron microscopy (SEM) images substantiated the formation of a shish–kebab structure in the treated samples. The study concludes that the geopolymer underwent oxidation and material degradation as a result of the chemical and mechanical treatments, transitioning to a more crystalline state and concomitantly losing its initial elasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In Situ X-ray Scattering Reveals Coarsening Rates of Superlattices Self-Assembled from Electrostatically Stabilized Metal Nanocrystals Depend Nonmonotonically on Driving Force

Self-assembly of colloidal nanocrystals (NCs) into superlattices (SLs) is an appealing strategy to design hierarchically organized materials with promising functionalities. Mechanistic studies are still needed to uncover the design principles for SL self-assembly, but such studies have been difficult to perform due to the fast time and short length scales of NC systems. To address this challenge, we developed an apparatus to directly measure the evolving phases in situ and in real time of an electrostatically stabilized Au NC solution before, during, and after it is quenched to form SLs using small-angle X-ray scattering. By developing a quantitative model, we fit the time-dependent scattering patterns to obtain the phase diagram of the system and the kinetics of the colloidal and SL phases as a function of varying quench conditions. The extracted phase diagram is consistent with particles whose interactions are short in range relative to their diameter. We find the degree of SL order is primarily determined by fast (subsecond) initial nucleation and growth kinetics, while coarsening at later times depends nonmonotonically on the driving force for self-assembly. We validate these results by direct comparison with simulations and use them to suggest dynamic design principles to optimize the crystallinity within a finite time window. The combination of this measurement methodology, quantitative analysis, and simulation should be generalizable to elucidate and better control the microscopic self-assembly pathways of a wide range of bottom-up assembled systems and architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling Sequences of Earthquakes and Aseismic Slip (SEAS) in Elasto-Plastic Fault Zones With a Hybrid Finite Element Spectral Boundary Integral Scheme

We present a coupled finite element spectral boundary integral framework for modeling sequences of earthquakes and aseismic slip on a 2-D planar rate-and-state fault with off-fault visco-plastic response in the plane strain approximation. The model resolves both slow aseismic deformation and inertia effects during rapid slip. As an application, we perform two sets of simulations with different choices of cohesion to explore the co-evolution of fault slip, bulk plasticity and local stress fields. The first set implements a relatively large value of the cohesion parameter, which results in limiting inelastic strain accumulation to dynamic rupture phases. The second set implements a smaller cohesion, allowing for plastic strain to accumulate in both seismic and aseismic phases. For the first model, our results indicate that the extent and distribution of plastic strain depend on the angle of maximum compressive principal stress. At larger angles, inelastic strain accumulates on the extensional side of a dynamically propagating rupture. At smaller angles, the extent of plasticity is limited to the compressional side of the domain. At smaller cohesion values, off-fault plasticity may occur during aseismic slip, which alters the nucleation characteristics and earthquake sequence pattern. Furthermore, our results at lower cohesion values indicate that plastic strain accumulation may occur in both the extensional and compressional sides of the off-fault bulk even at higher angles of maximum compression. In conclusion, this produces damage patterns that deviate from the traditional off-fault fan-like distribution observed in dynamic rupture simulations and emphasizes the significance of long-term deformation in interpreting observations.

58 GEOSCIENCES↗
NASA NTRS1992

Magellan mission summary

Magellan started mapping the planet Venus on September 15, 1990, and after one cycle (one Venus day or 243 earth days) had mapped 84 percent of the planet's surface. This returned an image data volume greater than all past planetary missions combined. Spacecraft problems were experienced in flight. Changes in operational procedures and reprogramming of onboard computers minimized the amount of mapping data lost. Magellan data processing is the largest planetary image-processing challenge to date. Compilation of global maps of tectonic and volcanic features, as well as impact craters and related phenomena and surface processes related to wind, weathering, and mass wasting, has begun. The Magellan project is now in an extended mission phase, with plans for additional cycles out to 1995. The Magellan project will fill in mapping gaps, obtain a global gravity data set between mid-September 1992 and May 1993, acquire images at different view angles, and look for changes on the surface from one cycle to another caused by surface activity such as volcanism, faulting, or wind activity.

Saunders, R. S.↗
NASA NTRS1996

Computational Analysis of Static and Dynamic Behaviour of Magnetic Suspensions and Magnetic Bearings

Static modelling of magnetic bearings is often carried out using magnetic circuit theory. This theory cannot easily include nonlinear effects such as magnetic saturation or the fringing of flux in air-gaps. Modern computational tools are able to accurately model complex magnetic bearing geometries, provided some care is exercised. In magnetic suspension applications, the magnetic fields are highly three-dimensional and require computational tools for the solution of most problems of interest. The dynamics of a magnetic bearing or magnetic suspension system can be strongly affected by eddy currents. Eddy currents are present whenever a time-varying magnetic flux penetrates a conducting medium. The direction of flow of the eddy current is such as to reduce the rate-of-change of flux. Analytic solutions for eddy currents are available for some simplified geometries, but complex geometries must be solved by computation. It is only in recent years that such computations have been considered truly practical. At NASA Langley Research Center, state-of-the-art finite-element computer codes, 'OPERA', 'TOSCA' and 'ELEKTRA' have recently been installed and applied to the magnetostatic and eddy current problems. This paper reviews results of theoretical analyses which suggest general forms of mathematical models for eddy currents, together with computational results. A simplified circuit-based eddy current model proposed appears to predict the observed trends in the case of large eddy current circuits in conducting non-magnetic material. A much more difficult case is seen to be that of eddy currents in magnetic material, or in non-magnetic material at higher frequencies, due to the lower skin depths. Even here, the dissipative behavior has been shown to yield at least somewhat to linear modelling. Magnetostatic and eddy current computations have been carried out relating to the Annular Suspension and Pointing System, a prototype for a space payload pointing and vibration isolation system, where the magnetic actuator geometry resembles a conventional magnetic bearing. Magnetostatic computations provide estimates of flux density within airgaps and the iron core material, fringing at the pole faces and the net force generated. Eddy current computations provide coil inductance, power dissipation and the phase lag in the magnetic field, all as functions of excitation frequency. Here, the dynamics of the magnetic bearings, notably the rise time of forces with changing currents, are found to be very strongly affected by eddy currents, even at quite low frequencies. Results are also compared to experimental measurements of the performance of a large-gap magnetic suspension system, the Large Angle Magnetic Suspension Test Fixture (LAMSTF). Eddy current effects are again shown to significantly affect the dynamics of the system. Some consideration is given to the ease and accuracy of computation, specifically relating to OPERA/TOSCA/ELEKTRA.

Britcher, Colin P.↗
DOE OSTI2022

Effect of differently oriented interlayer phases on the radiation damage of Inconel-$\mathrm{Ni}$ multimetallic layered composite

Multimetallic layered composites (MMLCs) have shown an excellent potential for application under extreme environments, e.g., accident-tolerant fuel cladding, because of their low oxidation tendency and high corrosion resistance. Interfacial phases or complexions in nanocrystalline materials accelerate the annihilation of defects and enhance the radiation resistance of materials, making MMLCs with engineered interlayer phases compelling to deploy in extreme conditions. However, implementation of MMLCs in full capacity remained a challenge due to a lack of fundamental understanding of the underlying mechanisms governing the characteristics of the interface between the metallic layers. The precise role of interlayer phases in MMLCs and their interaction with defects, specifically under extreme conditions, is still unexplored. Pursuing atomistic simulations for various Inconel-Ni MMLCs model materials, we revealed accelerated defect mobility in interlayers with larger crystalline misorientation and the inverse relationship between the interface sink strength to the misorientation angle. Furthermore, we found a linear relation between interlayer misorientation angle with the density of radiation-induced defects and radiation enhanced displacements. So, our results indicate that radiation-induced material degradation is accelerated by the higher defect formation tendency of MMLCs with a high-angle interlayer interface.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Beam modulation and bump-on-tail effects on Alfvén eigenmode stability in DIII-D

Beam modulation effects on Alfvén eigenmode stability have been investigated in a recent DIII-D experiment and show that variations in neutral beam modulation period can have an impact on the beam driven Alfvén eigenmode spectrum and resultant fast ion transport despite similar time-averaged input power. The experiment was carried out during the current ramp phase of L-mode discharges heated with sub-Alfvénic 50–80 kV deuterium neutral beams that drive a variety of Alfvén eigenmodes unstable. The modulation period of two interleaved beams with different tangency radii was varied from shot to shot in order to modify the relative time dependent mix of the beam pitch angle distribution as well as the persistence of a bump-on-tail feature near the injection energy (a feature confirmed by imaging neutral particle analyzer measurements). As the beam modulation period is varied from 7 ms to 30 ms on/off (typical full energy slowing down time of τ slow ≈ 50 ms at mid-radius), toroidicity-induced Alfvén eigenmodes (TAEs) located in the outer periphery of the plasma become intermittent and coincident with the more tangential beam. Core mode activity changes from reversed shear Alfvén eigenmodes (RSAEs) to a mix of RSAE and beta-induced Alfvén eigenmodes. Discharges with 30 ms on/off period do not have a persistent bump-on-tail feature, have the lowest average mode amplitude and least fast ion transport. Furthermore, detailed analysis of an individual TAE using TRANSP kick modeling (Monte Carlo evolution of the distribution function with probabilistic 'kicks' by the AEs) and the resistive MHD code with kinetic fast ions, MEGA, find no strong role of energy gradient drive due to bump-on-tail features. Instead, the observed TAE modulation with interleaved beams is likely a pitch angle dependent result combined with slowing down of the tangential beam between pulses. For the conditions investigated, bump-on-tail contributions to TAE drive were found to be 5% or less of the total drive at any given time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Micromagnetic and Magnetooptical Properties of Ferromagnetic/Heavy Metal Thin Film Structures

The magnetic properties of CoPt, CoPd, and FePd thin films with different contents of a ferromagnetic material fabricated by electron beam evaporation have been compared. The micromagnetic structure investigations have shown a decrease in the magnetic domain size with an increase in the Co content in the CoPt and CoPd films, which has been attributed to the presence of two magnetic phases in the films. The magnetooptical studies have shown anomalously large Faraday angles and the absence of Kerr effect in the CoPt films, which make them attractive for application in optics. In the FePd films, the minimum coercivity values have been obtained from the magnetic-field dependences of the magnetization, which has also been related to the magnetic structure features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Tracking Two Spacecraft With Same-Beam Interferometry

Accuracy greater than in prior interferometric spacecraft tracking. Report discusses use of same-beam interferometry in determining relative positions of two spacecraft, one in orbit around distant planet, other either in orbit or on surface of planet. Same-beam interferometry used when angle subtended by both spacecraft, as seen from Earth, less than angular width of beam of tracking antenna. Two ground stations separated by long baseline simultaneously and continuously track phases of carrier signals transmitted by both spacecraft.

Folkner, William M.↗