Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Evaluation of Polymer Hermetically Sealed Tantalum Capacitors

Polymer cathode tantalum capacitors have lower ESR (equivalent series resistance) compared to other types of tantalum capacitors and for this reason have gained popularity in the electronics design community. Their use allows improved performance of power supply systems along with substantial reduction of size and weight of the components used. However, these parts have poor thermal stability and can degrade in humid environments. Polymer hermetically sealed (PHS) capacitors avoid problems related to environmental degradation of molded case parts and can potentially replace current wet and solid hermetically sealed capacitors. In this work, PHS capacitors manufactured per DLA LAM DWG#13030 are evaluated for space applications. Several lots of capacitors manufactured over period from 2010 to 2014 were tested for the consistency of performance, electrical and thermal characteristics, highly accelerated life testing, and robustness under reverse bias and random vibration conditions. Special attention was given to analysis of leakage currents and the effect of long-term high temperature storage on capacitors in as is condition and after hermeticity loss. The results show that PHS capacitors might be especially effective for low-temperature applications or for system requiring a cold start-up. Additional screening and qualification testing have been recommended to assure the necessary quality of capacitors for space projects.

ferrite beads↗
NASA NTRS1985

Latitudinal gradients of cosmic rays and the polarity reversal of the heliospheric magnetic field: A preliminary evaluation

Within the statistical limits imposed by the currently available data and the noise inherent in the determination of the latitudinal gradient, no evidence for the expected change in the latitudinal gradient from pre-1980 to post-1980 epochs can be found. In addition, the rigidity dependence of the gradient appears to be the same in the two epochs. Thus, no evidence is found for a sensitivity of the latitudinal gradient to the polarity of the largescale heliospheric magnetic field such as has been predicted by models incorporating particle drifts.

Newkirk, G., Jr.↗
NASA NTRSDate not supplied

Computationally Guided Design of Polymer-Coated Microparticles as Reusable Materials

Long-duration space exploration missions and sustained lunar or Martian surface operations present greater demands for multifunctional and reusable materials. By scaling down the amount of material to be launched from Earth, both mission cost and risk can be reduced. In this regard, leveraging in-space manufacturing capabilities with reusable feedstock materials is an attractive option, as it will allow for articles to be generated on demand, utilized, and then recycled for additional use. NASA’s Enabling Sustained Presence Using Recyclables (ESPUR) project aims to develop reusable materials using polymer-coated microparticles that are bonded via reversible Diels-Alder reactions, where only modest heat is needed to trigger the reverse reaction and enable reuse. For proof-of-concept demonstration, research is currently focused on the fabrication of epoxy microparticles that contain a copoly(carbonate urethane) coating with maleimide and furan functionalities. Here, we discuss the integration of computational materials modeling approaches to help navigate the large design space in this development effort. We perform molecular dynamics (MD) simulations with atomistic and coarse-grained models of the copolymer, which allow us to evaluate the effects of design parameters like the molecular weight and composition on the molecular interactions and chain dynamics. We show how the properties change with the reversible bonds. We also leverage discrete element method (DEM) simulations to assess how microparticle design parameters like the size ratio and volume fraction can be tuned to increase the packing density and number of microparticle contacts to improve the mechanical properties. Our results demonstrate how computational tools can be used in close collaboration with experimental efforts to accelerate material design.

reusable materials↗
NASA NTRS1988

Tunneling effects in the current-voltage characteristics of high-efficiency GaAs solar cells

Evidence is that tunneling via states in the forbidden gap is the dominant source of excess current in the dark current-voltage (I-V) characteristics of high-efficiency DMCVD grown Al(x)Ga(1-x)As/GaAs(x is equal to or greater than 0.85) solar cells. The dark forward and reverse I-V measurements were made on several solar cells, for the first time, at temperatures between 193 and 301 K. Low-voltage reverse-bias I-V data of a number of cells give a thermal activation energy for excess current of 0.026 + or - 0.005 eV, which corresponds to the carbon impurity in GaAs. However, other energy levels between 0.02 eV and 0.04 eV were observed in some cells which may correspond to impurity levels introduced by Cu, Si, Ge, or Cd. The forward-bias excess current is mainly due to carrier tunneling between localized levels created in the space-charge layer by impurities such as carbon, which are incorporated during the solar cell growth process. A model is suggested to explain the results.

Kachare, R.↗
NASA NTRS2017

Long-Term Cryogenic Propellant Storage on Mars with Hercules Propellant Storage Facility

This report details the process and results of roughly sizing the steady state, zero boil-off thermal and power parameters of the Hercules Propellant Storage Facility. For power analysis, isothermal and isobaric common bulkhead tank scenarios are considered. An estimated minimum power requirement of 8.3 kW for the Reverse Turbo-Brayton Cryocooler is calculated. Heat rejection concerns in soft vacuum Mars atmosphere are noted and potential solutions are proposed. Choice of coolant for liquid propellant conditioning and issues with current proposed cryocooler cycle are addressed; recommendations are made, e.g. adding a Joule-Thomson expansion valve after the Reverse Turbo-Brayton turbine in order to have two-phase, isothermal heat exchange through the Broad Area Cooling system. Issues with cross-country transfer lines from propellant storage to flight vehicle are briefly discussed: traditional vacuum jacketed lines are implausible, and Mars insulation needs to be developed.

Propellant Storage↗
NASA NTRS1987

Power and charge dissipation from an electrodynamic tether

The Plasma Motor-Generator project utilizes the influence of the geomagnetic field on a conductive tether attached to a LEO spacecraft to provide a reversible conversion of orbital energy into electrical energy. The behavior of the current into the ionospheric plasma under the influence of the geomagnetic field is of significant experimental and theoretical interest. Theoretical calculations are reviewed which start from Maxwell's equations and treat the ionospheric plasma as a linear dielectric medium. These calculations show a charge emitting tether moving in a magnetic field will generate electromagnetic waves in the plasma which carry the charge in the direction of the magnetic field. The ratio of the tether's speed to the ion cyclotron frequency which is about 25 m for a LEO is a characteristic length for the phenomena. Whereas for the dimensions of the contact plasma much larger than this value the waves are the conventional Alfven waves, when the dimensions are comparable or smaller, diffraction effects occur similar to those associated with Fresnel diffraction in optics. The power required to excite these waves for a given tether current is used to estimate the impedance associated with this mode of charge dissipation.

Hite, Gerald E.↗
NASA NTRS1989

Low noise HgCdTe 128 x 128 SWIR FPA for Hubble space telescope

Large area focal plane arrays of unprecedented performance were developed for use in Near Infrared Camera and Multi-Object Spectrometer (NICMOS), a proposed Hubble Space Telescope refurbishment instrument. These FPAs are 128x128-element, HgCdTe hybrid arrays with a cutoff wavelength of 2.5 microns. The multiplexer consists of a CMOS field effect transistor switch array with a typical mean readout noise of less than 30 electrons. The detectors typically have a mean dark current of less than 10 electrons/s at 77 K, with currents below 2 electrons measured at 60 K (both at 0.5 V reverse bias). The mean quantum efficiency is 40 to 60 percent at 77 K for 1.0 to 2.4 microns. Functional pixel yield is typically greater than 99 percent, and the power consumption is approximately 0.2 mW (during readout only).

Blessinger, Michael↗
NASA NTRS1993

A Spectral Algorithm for Envelope Reduction of Sparse Matrices

The problem of reordering a sparse symmetric matrix to reduce its envelope size is considered. A new spectral algorithm for computing an envelope-reducing reordering is obtained by associating a Laplacian matrix with the given matrix and then sorting the components of a specified eigenvector of the Laplacian. This Laplacian eigenvector solves a continuous relaxation of a discrete problem related to envelope minimization called the minimum 2-sum problem. The permutation vector computed by the spectral algorithm is a closest permutation vector to the specified Laplacian eigenvector. Numerical results show that the new reordering algorithm usually computes smaller envelope sizes than those obtained from the current standard algorithms such as Gibbs-Poole-Stockmeyer (GPS) or SPARSPAK reverse Cuthill-McKee (RCM), in some cases reducing the envelope by more than a factor of two.

Barnard, Stephen T.↗
NASA NTRS2000

Interposition vein graft for giant coronary aneurysm repair

Coronary aneurysms in adults are rare. Surgical treatment is often concomitant to treating obstructing coronary lesions. However, the ideal treatment strategy is poorly defined. We present a case of successful treatment of a large coronary artery aneurysm with a reverse saphenous interposition vein graft. This modality offers important benefits over other current surgical and percutaneous techniques and should be considered as an option for patients requiring treatment for coronary aneurysms.

Non-NASA Center↗
NASA NTRSDate not supplied

Degradation of Aluminum and Tantalum Wet Electrolytic Capacitors during High Temperature Storage

Aluminum electrolytic capacitors (AEC) are available to higher ranges of capacitance and voltage compared to tantalum electrolytic capacitors (TEC). However, evaporation of the electrolyte during operation or storage of conventional AEC that is accelerated with temperature does not allow use of these parts in space electronics. Instead, for systems requiring large value capacitors and high operating voltages, designers must use banks of TECs that increases substantially the size and weight of electronic modules. Development of hermetically sealed AECs might be beneficial for space systems provided the necessary reliability is assured. Increase in leakage current during storage of AEC is well known and is often explained by dissolution of aluminum oxide in electrolyte. However, other possible mechanisms of this effect have not been discussed. Although hermetically sealed TEC have been used in space systems for years, there is a lack of information about the effects of storage on their characteristics that is of great interest as a comparison for aluminum capacitors. This work explores degradation of AC characteristics (capacitance, dissipation factor, and equivalent series resistance) and DC characteristics (leakage and absorption currents) in different types of aluminum and tantalum hermetically sealed capacitors during long-term storage at high temperatures (100 °C, 125 °C, and 150 °C). It is shown that leakage currents are degrading in both types of capacitors, but this degradation is reversible after bias application. Mechanisms of degradation are discussed, and explanations based on the processes common for both types of capacitors are suggested. Problems associated with assessments of hermeticity and evaporation of the electrolyte in hermetically sealed capacitors are analyzed.

Alexander Teverovsky↗
NASA NTRS1992

The Harang discontinuity and magnetospheric forecasting

This paper describes the physics of the Harang discontinuity and its application to forecasting of the magnetospheric environment. Gradient/curvature depletion of energetic ions from earthward drifting flux tubes results in upward Birkeland currents. Ionospheric closure rotates the dawn-dusk convection electric field resulting in the Harang reversal. This physical mechanism has been incorporated into the Rice Convection Model (RCM) and can serve as a fundamental part of the forecasting of the magnetospheric system. The inclusion of this physics within the RCM results in a physical picture of the Harang discontinuity which did not previously exist. Model results are close to observations and represent a significant improvement in predicted electric field and Birkeland current patterns.

Erickson, G. M.↗
NASA NTRS1967

Theory of a satellite electrostatic probe.

Circular planar satellite electrostatic probe theory based on reversible particle trajectories, showing relation between boundary curve in velocity space and current-voltage characteristics

PARTICLE TRAJECTORY↗
NASA NTRS1974

High voltage power Schottky diodes

Calculations of the low frequency rectification efficiency of power Schottky diodes show that silicon Schottky rectifiers have lower losses than silicon p-n junctions for all voltage applications up to approximately 150 volts. These calculations are presented. Large area Schottky diodes have been fabricated which exhibit near ideal reverse leakage at 100 C out to approximately 100 volts and which have current capability of 100 A. Fabrication details and performance data are presented.

Cordes, L. F.↗
NASA NTRS1979

Rigid-drift magnetohydrodynamic equilibria for cylindrical screw pinches

The rigid-drift equations of MHD equilibria in cylindrical geometry are solved analytically in terms of an infinite series of hypergeometric functions for the case where the pressure is proportional to the square of number density and the current density is arbitrarily pitched. Solutions are obtained for a pure Z pinch, a pure theta pinch, and a general screw pinch. It is found that the shapes of the pressure and magnetic-field profiles are completely determined by the model once two parameters are specified: the local plasma beta on the axis and a quantity related to the pitch of the current density. A set of profiles that resemble those observed experimentally in reversed-field pinches is presented. The results also indicate that hollow pressure profiles and reversed Bz profiles can occur either simultaneously or independently and that the pressure always falls to zero at a finite value of the radius.

Turner, L.↗
NASA NTRS1990

Parallel-vector computation for CSI-design code

Computational aspects of Control-Structure Interaction (CSI) DESIGN code is reviewed. Numerical intensive computation portions of CSI-DESIGN code were identified. Improvements in computational speed for the CSI-DESIGN code can be achieved by exploiting parallel and vector capabilities offered by modern computers, such as the Alliant, Convex, Cray-2, and Cray-YMP. Four options to generate the coefficient stiffness matrix and to solve the system of linear, simultaneous equations are currently available in the CSI-DESIGN code. A preprocessor to use RCM (Reverse Cuthill-Mackee) algorithm for bandwidth minimization was also developed for the CSI-DESIGN code. Preliminary results obtained by solving a small-scale, 97 node CSI finite element model (for eigensolution) have indicated that this new CSI-DESIGN code is 5 to 6 times faster (using 1 Alliant processor) than the old version of CSI-DESIGN code. This speed-up was achieved due to the RCM algorithm and the use of a new skyline solver. Efforts are underway to further improve the vector speed for CSI-DESIGN code, to evaluate its performance on a larger scale CSI model (such as phase zero CSI model) to make the code run efficiently on multiprocessor, parallel computer environment, and to make the code portable among different parallel computers available at NASA LaRC, such as Alliant, Convex, and Cray computers.

Nguyen, Duc T.↗
NASA NTRS1993

A spectral algorithm for envelope reduction of sparse matrices

A new algorithm for reducing the envelope of a sparse matrix is presented. This algorithm is based on the computation of eigenvectors of the Laplacian matrix associated with the graph of the sparse matrix. A reordering of the sparse matrix is determined based on the numerical values of the entries of an eigenvector of the Laplacian matrix. Numerical results show that the new reordering algorithm can in some cases reduce the envelope by more than a factor of two over the current standard algorithms such as Gibbs-Poole-Stockmeyer (GPS) or SPARSPAK's reverse Cuthill-McKee (RCM).

Barnard, Stephen T.↗
NASA NTRS1992

Formation and stability of the self-consistent one-dimensional tail current sheet

The paper investigates the formation, the structure, and the stability of self-consistent one-dimensional current sheets in which the ions carry most of the current and momentum (the occurrence of which was suggested by observations of Mitchell et al., 1990; and Sergeev et al., 1990). Results of the analysis showed that, for the case of a cold current sheet, the characteristic thickness lamba equals to about (Bz/B0) exp 4/3 c/omega(p0), where Bz is the normal field component, B0 is the asymptotic magnitude of the reversing field, and c/omega(p0)is the collisionless ion skin depth based on lobe density. A two-dimensional self-consistent dynamical simulation model is developed, which demonstrates that these idealized current sheets are unstable to kink perturbations driven by the anisotropic pressure distribution produced by the chaotic nature of the particle orbits in a field-reversal region.

Pritchett, P. L.↗
NASA NTRS1983

Eddy intrustion of hot plasma into the polar cap and formation of polar-cap arcs

Under the simple postulate that multiple large scale detachable magnetospheric convection eddies can exist in the vicinity of the convection reversal boundary and in the polar cap, by Kelvin-Helmholtz instability or otherwise, it is shown that a number of seemingly disconnected plasma and electric field observations in the polar cap can be organized into a theory of magnetosheath and plasmasheet plasma intrusion into the polar cap. Current theory of inverted V structures then predicts existence of similar, but weaker, structures at the eddy convection reversal boundaries in the polar cap. A possible consequence is that the polar cap auroras are natural offshoots from discrete oval arcs and evidently are formed by similar processes. The two arc systems can occassionally produce an optical image in the form of the theta aurora.

Chiu, Y. T.↗