Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Enhanced electrochemical performance and extended cycling of resorcinol-formaldehyde derived N-doped carbon xerogel for alkali metal-ion (Li/Na/K) batteries

Resorcinol formaldehyde-derived carbon xerogel (RFC) is a versatile material with tuneable properties, synthesized through a simple sol-gel method. This study presents nitrogen-doped RF carbon xerogel (N-RFC) with 11.8 at% nitrogen doping, offering a microporous architecture ideal for alkali metal-ion (Li, Na, K) batteries. The porous N-doped framework enhances electrochemical performance by improving ion transport, increasing active storage sites, and significantly boosting metal-ion adsorption, particularly through pyrrolic nitrogen, as revealed by first-principles calculations supported by XPS analysis. N-RFC anodes showed excellent cycling stability, high-capacity retention, and fast charge/discharge capabilities, rendering them suitable for commercial applications. Notably, the N-RFC anode demonstrates high-rate long-term cycling stability, retaining its capacity of 83.5 % (188 mAh/g at 2 C-rate) and 50 % (133 mAh/g at 1250 mA/g) over 1000 cycles for Li and Na-ion batteries, respectively, favorable for commercial battery applications. Additionally, N-RFC demonstrates a reversible capacity of 120 mAh/g after 394 cycles with a retention of 82 % for K-ion batteries. The ability of the material to accommodate larger ions like Na + and K + further emphasizes its versatility and potential application in diverse alkali metal-ion battery systems.

25 ENERGY STORAGE↗
DOE OSTI2021

In Situ Synthesis of Graphene-Coated Silicon Monoxide Anodes from Coa-Derived Humic Acid for High-Performance Lithium-Ion Batteries

Silicon monoxide (SiO) is attaining extensive interest amongst silicon-based materials due to its high capacity and long cycle life; however, its low intrinsic electrical conductivity and poor coulombic efficiency strictly limit its commercial applications. Here low-cost coal-derived humic acid (HA) is used as a feedstock to synthesize in-situ graphene-coated disproportionated SiO (D-SiO@G) anode with a facile method. HRTEM and XRD confirm the well-coated graphene layers on an SiO surface. Scanning Transmission X-ray Microscopy (STXM) and X-ray Absorption Near-Edge Structure (XANES) spectra analysis indicate that the graphene coating effectively hinders the side-reactions between the electrolyte and SiO particles . As a result, the D-SiO@G anode presents an initial discharge capacity of 1937.6 mAh g -1 at 0.1 A g -1 and an initial coulombic efficiency (ICE) of 78.2%. High reversible capacity (1023 mAh g -1 at 2.0 A g -1 ), excellent cycling performance ( 72.4% capacity retention after 500 cycles at 2.0 A g -1 ), and rate capability (774 mAh g -1 at 5 A g -1 ) results are substantial. Full coin cells assembled with LiFePO 4 electrodes and D-SiO@G electrodes display impressive rate performance. These results indicate a promising potential for practical use in high-performance lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Assessment of reverse gun taylor cylinder experimental configuration

Experimental efforts for Taylor-anvil impact tests have often been limited to near room temperature. The ‘Reverse Gun’ method proposed by Gust in 1982 allows for the Taylor impact specimen to be uniformly heated without temperature losses before impact. Through the use of finite element analysis, we explore two topics in this work. First, we examine whether the reverse gun experimental configuration is comparable to the traditional Taylor-anvil setup. Second, we assess the accuracy of several commonly employed flow strength models in terms of their ability to predict the reverse gun experimental results which involve dynamic loading conditions and complex thermo-mechanical coupling. The reverse gun simulations are performed for tantalum targets at initial temperatures in the range 295 K to 1295 K and velocities from 135 m/s to 242 m/s. We show that with suitable care in the modeling of the preheated reverse gun experiments one can make valuable assessments of flow strength models. Given the conditions explored, these observations probe the thermal softening, strain hardening, and strain rate sensitivity of the material.

42 ENGINEERING↗
DOE OSTI2025

Revealing Progressive Degradation of Cobalt Oxide Nanoparticles During Thermochemical Redox Cycling via Operando STEM-EELS

Metal oxides are promising materials for long-duration thermochemical energy storage. Efforts to characterize their reaction kinetics, conversion rate, and morphological evolution during thermochemical cycling have largely focused on bulk and microscale measurements. However, the design of nanostructured metal oxides could improve the reaction reversibility and kinetics, warranting the development of platforms to investigate how these materials behave at the nanoscale. Here, we demonstrate the use of correlative, time-resolved electron energy loss spectroscopy and imaging in an environmental transmission electron microscope for studying the thermochemical cyclability of cobalt oxide nanoparticles with high spatial and temporal resolution. The spectroscopic data reveal a striking decrease in reaction kinetics after the first cycle, resulting from sintering-driven nanostructural densification. Comparison between cycling in humid and dry air shows that atmospheric conditions can modulate reaction transition temperatures but have limited effects on sintering over multiple cycles, suggesting long-term durability will instead rely on synthetic and/or nanostructural modifications.

25 ENERGY STORAGE↗
DOE OSTI2025

Entrainment, Detrainment, and Dilution of Dry and Moist Atmospheric Thermals

Here this study examines the entrainment, detrainment, and dilution of dry and moist (cloud) atmospheric thermals in large-eddy simulations. In a neutrally stable environment (with respect to dry dynamics), moist thermals have an increase in radius R with thermal height z t (α ≡ dR/dz t ) about 4 times smaller compared to dry thermals when density stratification is considered and ~2.4 times smaller without density stratification (i.e., applying the Boussinesq approximation). An analytic expression relating α to several dimensionless parameters is derived from the thermal impulse–circulation relation to clarify the factors impacting α. This expression shows that the difference in buoyancy structure between moist and dry thermals, with buoyancy concentrated in the central cores of moist thermals owing to latent heating, explains their smaller spreading rates. Individual contributions of entrainment and detrainment are analyzed using a direct parcel-based approach in the simulations. Moist thermals have similar fractional detrainment but much smaller fractional entrainment rates compared to dry thermals, consistent with the differences in α. Despite having smaller α, moist thermals are similarly dilute (quantified by a passive tracer) as dry thermals because of their greater mixing efficiency with the environment. Thus, moist thermals are substantially dilute but expand much less in size/volume as they rise compared to dry thermals. The α values for moist thermals in (dry) neutral and statically stable environments are similar, but fractional entrainment and especially detrainment rates are greater in the stable environment. Large detrainment rates are associated with a breakdown of the broader thermal vortex ring structure, especially with low environmental relative humidity, attributed in part to evaporation and buoyancy reversal.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Sodium azide mutagenesis induces a unique pattern of mutations

The nature and effect of mutations are of fundamental importance to the evolutionary process. The generation of mutations with mutagens has also played important roles in genetics. Applications of mutagens include dissecting the genetic basis of trait variation, inducing desirable traits in crops, and understanding the nature of genetic load. Previous studies of sodium azide-induced mutations have reported single nucleotide variants (SNVs) found in individual genes. To characterize the nature of mutations induced by sodium azide, we analyze whole-genome sequencing (WGS) of 11 barley lines derived from sodium azide mutagenesis, where all lines were selected for diminution of plant fitness owing to induced mutations. We contrast observed mutagen-induced variants with those found in standing variation in WGS of 13 barley landraces. Here, we report indels that are two orders of magnitude more abundant than expected based on nominal mutation rates. We found induced SNVs are very specific, with C → T changes occurring in a context followed by another C on the same strand (or the reverse complement). The codons most affected by the mutagen include the sodium azide-specific CC motif (or the reverse complement), resulting in a handful of amino acid changes and few stop codons. The specific nature of induced mutations suggests that mutagens could be chosen based on experimental goals. Sodium azide would not be ideal for gene knockouts but will create many missense mutations with more subtle effects on protein function.

Genetics & Heredity↗
DOE OSTI2022

Co-sputtering of lithium vanadium oxide thin films with variable lithium content to enable advanced solid-state batteries

Advanced solid-state batteries most likely will entail aggressive structures or architectures with constraints that typically limit processing temperatures. Considering this, we have identified the importance of providing lithiated electrode materials at a modest processing temperature. Here we describe a pathway to meet this by the development of a co-sputtering process using lithium oxide and vanadium oxide targets which enables the growth of lithiated vanadium oxide (LVO) thin films for application in solid-state batteries. Analysis of the structure and film composition of samples deposited with different co-sputtering rate ratios and post-annealing shows that multiple phases of Li x V 2 O 5 likely coexist (i.e. α-, ε-, δ-, and γ-V 2 O 5 ), and that this is unchanged after electrochemical cycling. The co-sputtering process can tune the lithium content up to a highly lithiated state of at least Li 2 V 2 O 5 . Electrochemical half-cells showed a significant amount of lithium available on the first charge (delithiation of LVO). LVO samples post-annealed at 300 °C showed typical redox peaks for Li x V 2 O 5 for both one and two lithium insertion reactions, which were highly reversible in most cases. A thin-film solid-state battery prototype using LVO as a cathode had 20% of the expected capacity, although the coulombic efficiency is near 100% at a fast rate (22C). As a result, this co-sputtering technique represents an opportunity for low temperature synthesis of pre-lithiated cathodes for thin film batteries, and introduces a broader methodology of depositing metal oxides with different alkali metal contents.

25 ENERGY STORAGE↗
DOE OSTI2024

Electrolyte and Cutoff Potential Effects on Cycle Life of Li4Ti5O12/LiNi0.9Mn0.1O2 Batteries for Behind-the-Meter Storage Applications

Behind-the-Meter Storage (BTMS) is a stationary battery energy storage system that is connected to the electrical distribution system on the customer's side of the utility's service meter. BTMS systems are used to store electrical energy from the grid as well as inconstant, renewable energy, such as local solar and wind generation. A successful BTMS system will allow the customer to pair their energy generation and storage to optimize electrical consumption from the grid, improving reliability and minimizing cost. For BTMS applications, batteries must be designed and optimized with different set of criteria from other leading segments of the Li-ion battery market, like transportation, due the system being stationary and proximal to the residential or commercial building it's benefitting. BTMS applications prioritize safety, cost (low/no-critical materials), reliability (20-year calendar life), and durability (10,000 cycle life), while having the ability to (minimally) compromise energy density and rate capability. Lithium titanate (Li4Ti5O12-, LTO) is a promising anode candidate for BTMS applications due to its high safety and capacity retention, while maintaining a reasonable 160 mAhg-1 reversable capacity and composition of relatively abundant materials. (1) Specifically, LTO has a high working voltage which helps to prevent Li dendrite formation, improving safety. Furthermore, LTO also has negligible lithiation-based volume change, leading to less mechanical pulverization, or loss of active material, upon cycling. For the cathode, materials with little or no Co are of high interest due to the high cost and low abundance of Co. LiMn2O4 (LMO) has been paired with LTO for BTMS applications in the past due to its safety, low cost (abundancy), and reasonably high operating voltage. (2-4) However, the low capacity of LMO limits energy density and specific energy. While not the highest priority for BTMS applications, increasing energy density will enable deployment in space constrained BTMS applications and decrease total cost. LiNi0.9Mn0.1O2 (LN-MO) is a recently developed material with promise due to its high operating voltage and relatively low price. (5) However, Ni-rich layered oxides, including LNMO, tend to struggle with capacity retention during high-voltage cycling due to mechanical pulverization, irreversible phase transitions, and unstable solid-electrolyte interphase. The study presented here focuses on building an understanding of how electrolyte solvent and varied cutoff potentials will impact the cycle life of LTO/LN-MO cells. Specifically, a comparison is provided between ethylene carbonate (EC), ethyl methyl carbonate (EMC), fluoroethylene carbonate (FEC), and Gen2 electrolyte solvents with 1M Lithium hexafluorophosphate (LiPF6) salt, cycling to two upper termination potentials, 2.6V and 2.7V. Electrochemical testing and diagnostics (e.g., differential capacity analysis, area specific impedance, constant voltage hold, and rate capability) and post-mortem characterization will be used to understand the aging behavior and failure mechanisms of the 8 cell combinations (four electrolytes and two voltage cutoffs). Cells with FEC electrolyte showed a lower initial capacity compared to cells with Gen2, EMC, and EC cycling at both voltages; however, the cells with FEC showed consistent trends in capacity retention with 2.6V and 2.7V termination potentials, while the cells with the other electrolytes showed much higher rates of capacity loss when cycling to the higher voltage. These results indicate that FEC may play a role in improving durability of high-voltage, Ni-rich electrode systems for use in high-cycle applications, such as BTMS.

electrolyte↗
DOE OSTI2021

Electric field reversals resulting from voltage waveform tailoring in Ar/O 2 capacitively coupled plasmas sustained in asymmetric systems

The etching of nanometer scale high-aspect-ratio (HAR) features into dielectric materials in low pressure radio frequency excited plasmas is often accompanied by charge accumulation inside the features which can slow etching rates and produce distortions such as twisting. The intra feature charging is at least partially produced by differences in electron and ion energy and angular distributions (EADs). Positive ions, accelerated to high energies having narrow angular spreads by the sheath electric field, can penetrate deeply into HAR features. Electrons typically arrive at the wafer with nearly thermal and isotropic distributions and do not penetrate deeply into HAR features. These disparities lead to differential charging of the inside of the feature, which can lead to reductions in etch rate and feature distortion due to ion deflection. With in-creasing aspect ratio of features, charging challenges are expected to continue for the foreseeable future. In this work, the use of tailored voltage waveforms in geometrically asymmetric capacitively coupled plasmas sustained in Ar/O 2 at 40 mTorr was computationally investigated with the goal of shaping the EAD of electrons incident onto the substrate to address differential charging. The tailored waveform consisted of a sinusoidal wave and its higher harmonics with a fundamental frequency of 1 MHz. Further, we found that electric field reversals in the sheath and presheath can occur during the anodic portion of the cycle. The electric field reversal increases the energy and decreases the angular spread of electrons incident onto the substrate. The magnitude of the electric field reversal can be controlled by the phase angle of the even harmonics and the gas composition. Due to its electronegative nature, increasing mole fractions of O 2 impedes electron transport to the surface which further increases the electric field reversal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Test of nuclear decay rate variation due to an antineutrino flux

Unexplained variations of the decay rate parameter for weak interaction decays such as β ± decay, electron capture, as well as strong interaction α decay have been reported. Because these variations have been presented by a number of groups, at various locations, using various types of detectors, different isotopes, and over extended periods of time, some researchers have interpreted the source of these variations as not from ambient environmental factors such as temperature, pressure, and humidity but via an unexplained fundamental interaction. The state of decay rate parameter variations experiments is reviewed, and the reported results are placed into a common comparable context by defining a phenomenological cross section. After that we make decay parameter measurements as a function of time at the level of 10 -5 in the presences of an antineutrino flux with an on-off cycle time of ≈ 30 days. This level of precision requires a detailed understanding of both systematic and statistical errors; otherwise, systematic errors in the measurement may mimic the decay events of fundamental interactions. The experiment searched for variation of the $^{54}_{25}$Mn, e - capture decay rate parameter and $^{137}_{55}$Cs, β - decay rate parameter both to a level of precision of 1 part in ≈10 5 by comparing the difference between the decay rate in the presence of an antineutrino flux ≈ 3 x 10 12 $\bar{ν}$ cm -2 s -1 and no flux measurements. The experiment was located 6.53 m from the reactor core of the High Flux Isotope Reactor at the Oak Ridge National Laboratory. Two weak interaction decays, one via electron capture and the other via β - decay, were selected because the final state and the time reverse state each contain a neutrino and antineutrino, covering arguments that the antineutrino flux may interact differently or not at all in one of the cases. The $\gamma$ spectra from both decays were collected and analyzed independently. The measured variation in the decay rate parameters are found to be δλ/λ =(0.034 ± 1.38) x10 -5 for $^{54}_{25}$Mn and δλ/λ =(0.67±1.56) x10 -5 for $^{137}_{55}$Cs. These results are consistent with no measurable decay rate parameter variation due to an antineutrino flux, yielding a 68% confidence level upper limit sensitivity for $^{54}_{25}$Mn δλ/λ ≤ 1.31 x 10 -5 or σ ≤ 1.29 x10 -25 cm 2 in cross section and for $^{137}_{55}$Cs δλ/λ ≤ 2.23 x 10 -5 or σ ≤ 5.69 x10 -27 cm 2 . The cross-section upper limit obtained in these null or no observable effect measurements are ≈ 10 4 times more sensitive than past experiments reporting positive results in 54 Mn and 137 Cs. . .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Resilient NdFeB magnet recycling under the impacts of COVID-19 pandemic: Stochastic programming and Benders decomposition

Neodymium-iron-boron (NdFeB) magnets are the most powerful magnets per unit volume sold in the commercial market. Despite the increasing demand for clean energy applications such as electric vehicles and wind turbines, disruptive events including the COVID-19 pandemic have caused significant uncertainties in the supply and demand for NdFeB magnets. Therefore, this study aims to alleviate the risk of supply shortage for NdFeB magnets and the containing critical materials, rare-earth elements (REEs), through the development of a resilient reverse supply chain and logistics network design. We develop scenarios to model the unique impact of the COVID-19 pandemic on the proposed business, incorporating both disruption intensity and recovery rate. We formulate a chance-constrained two-stage stochastic programming model to maximize the profit while guaranteeing the network resiliency against disruption risks. To solve the problem in large-scale instances, we develop an efficient Benders decomposition algorithm that reduces the computational time by 98.5% on average compared to the default CPLEX algorithm. When applied to the United States, the model suggests the optimal facility locations, processing capacities, inventory levels, and material flows for NdFeB magnet recyclers that could meet 99.7% of the demand. To the best of our knowledge, this study is the first to incorporate the impacts of the COVID-19 pandemic to design a resilient NdFeB magnet recycling supply chain and logistics network, leveraging risk-averse stochastic programming.

42 ENGINEERING↗
DOE OSTI2021

Biological Mechanisms May Contribute to Soil Carbon Saturation Patterns: Modeling Archive

This Modeling Archive is in support of a TES-SFA publication “Biological Mechanisms May Contribute to Soil Carbon Saturation Patterns” (Craig et al., 2021). We ran and evaluated a multi-assumption soil organic carbon (SOC) model to investigate whether alternative assumptions regarding constraints on soil microbial biomass could lead to soil carbon saturation patterns. We developed this model in the Multi-Assumption Architecture and Testbed (MAAT, https://github.com/walkeranthonyp/MAAT, tag: v1.2.1_Craig2021; Walker et al. 2018). Using MAAT, we embedded three alternative hypotheses in a microbially explicit three-pool SOC model: 1) the efficiency of mineral-associated SOC formation decreases as mineral-associated SOC approaches a maximum value (“Mineral saturation”), 2) the microbial biomass turnover rate increases with increasing microbial biomass (“Density-dependent turnover”), and 3) community carbon use efficiency decreases as microbial biomass increases toward an upper limit (“Density-dependent growth”). We ran a factorial combination of these hypotheses resulting in eight models for three different classes of model (linear decay, Michaelis-Menten decay, or reverse Michaelis-Menten decay), resulting in 24 models, 12 of which are presented or discussed in the related publication. Models were parameterized using values from previous studies with similar models (Wang et al. 2013, Wieder et al. 2014, Li et al. 2014, Georgiou et al. 2017, Hassink and Whitmore 1997) and ran to an approximate steady state (200 years) at six (6) different C input rates corresponding to 0.5, 1, 2, 4, 7, and 10 times the default input value. Further model details are available in the related publication. This archive contains output from three MAAT simulations, and scripts to run these simulations and process and plot the data. Simulations are labeled “lin”, “MM_highKm”, and “RMM_highKm” reflecting factorial runs for linear, Michealis-Menten, and reverse Michaelis-Menten models, respectively. This archive contains: • 3 R scripts prepended with “init_MAAT_” to initialize runs (1 for each simulation), • 1 csv file containing years over which to run simulations (“met_year.csv”), • 1 bash script (.bs) to run MAAT, • 6 XML files that are output from MAAT describing a run (2 for each simulation), • 3 model output csv files prepended by “out_” (1 for each simulation), and • 1 analysis R script for reproducing figures 3 and 4 in Craig et al. 2021. See included user guide (Craig_2021_modeling_archive_20210315.pdf) for file organization details.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

20-kV GaN Switch Technology Demonstrated in High-Efficiency Medium-Voltage Power Module

GaN holds significant potential as a material for vertical p-n diodes, enabling the realization of devices with reverse breakdown voltages of 5 kV or higher. Carbon serves as the primary compensating dopant in the growth process, incorporated into GaN during metalorganic chemical vapor deposition (MOCVD) growth. The level of carbon incorporation depends on several factors, including growth rate, ammonia flow, temperature, pressure, and trimethylgallium (TMGa) flow. Through guided empirical modeling, the carbon incorporation in GaN growth could be predicted using a single parameter based on the ratio of ammonia flow to the growth rate. This model accurately predicts carbon concentrations ranging from 1x10 17 to 5x10 14 cm -3 while maximizing growth rates. Other extrinsic dopants have either been reduced below the threshold of consideration or modeled using similar single-parameter relationships. By identifying the dominant extrinsic dopants and accounting for them, an intrinsic defect with a concentration of 2.2x10 15 cm -3 was identified. By combining these relationships, growth conditions for n-GaN were optimized, resulting in electron concentrations as low as 1x10 15 cm -3 . Leveraging these techniques, p-n diodes were grown, achieving a reverse breakdown voltage as high as 3.1 kV.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Lithium Manganese Spinel Cathodes for Lithium-Ion Batteries

Spinel LiMn 2 O 4 , whose electrochemical activity was first reported by Professor John B. Goodenough’s group at Oxford in 1983, is an important cathode material for lithium-ion batteries, which attracts continuous academic and industrial interests. It is cheap and environmentally friendly, and has excellent rate performance with 3-dimensional (3D) Li + diffusion channels. However, it suffers from severe degradations, especially under extreme voltages and during high-temperature operations. In this review, the current understanding and future trends of the spinel cathode and its derivatives with cubic lattice symmetry (LiNi 0.5 Mn 1.5 O 4 that shows high-voltage stability, and Li-rich spinels that show reversible hybrid anion- and cation-redox activities) shall be discussed. Special attention is given to the degradation mechanisms, further development of spinel cathodes, and concepts of utilizing the cubic spinel structure to stabilize high-capacity layered cathodes and as robust framework for high-rate electrodes. Lastly, “Good spinel” surface phases like LiNi 0.5 Mn 1.5 O 4 are distinguished from “bad spinel” surface phases like Mn 3 O 4 .

25 ENERGY STORAGE↗
DOE OSTI2021

2D High‐Entropy Transition Metal Dichalcogenides for Carbon Dioxide Electrocatalysis

Abstract High‐entropy alloys combine multiple principal elements at a near equal fraction to form vast compositional spaces to achieve outstanding functionalities that are absent in alloys with one or two principal elements. Here, the prediction, synthesis, and multiscale characterization of 2D high‐entropy transition metal dichalcogenide (TMDC) alloys with four/five transition metals is reported. Of these, the electrochemical performance of a five‐component alloy with the highest configurational entropy, (MoWVNbTa)S 2 , is investigated for CO 2 conversion to CO, revealing an excellent current density of 0.51 A cm −2 and a turnover frequency of 58.3 s −1 at ≈ −0.8 V versus reversible hydrogen electrode. First‐principles calculations show that the superior CO 2 electroreduction is due to a multi‐site catalysis wherein the atomic‐scale disorder optimizes the rate‐limiting step of CO desorption by facilitating isolated transition metal edge sites with weak CO binding. 2D high‐entropy TMDC alloys provide a materials platform to design superior catalysts for many electrochemical systems.

Cavin, John↗
DOE OSTI2025

Permeate fluxes from desalination of brines and produced waters: A reactive transport modeling study

The increasing interest in the use of membrane systems to desalinate inland brackish water, agricultural drainage, and industrially produced wastewater demands improved means of predicting desalination system performance under variable feedwater compositions. The interaction among water flow, solute transport, and chemical composition in these systems impacts permeate flux evolution. Here, an established multicomponent reactive transport simulator that accounts for these coupled processes is applied to compute osmotic pressure and permeate fluxes in reverse osmosis (RO) systems. The model is first validated by predicting permeate fluxes for a set of benchtop crossflow experiments subject to a range of feed flow rates and compositions, under fouling and non-fouling conditions. Results compare favorably with measured data that show that solutions with similar total dissolved solids concentrations but different compositions result in different permeate fluxes. The model is then applied to predict permeate fluxes from the desalination of produced waters using a commercial spiral wound RO module. For NaCl-dominant brines, at total dissolved salt concentrations (TDS) below about 70 g/L, permeate fluxes are inversely proportional to water mole fraction as the latter is a reasonable approximation of water activity (i.e. ideal mixing). In the case of Ca–Cl-, Na–CO3- and Na–SO4-dominant brines below about 70 g/L TDS, this relationship does not hold as well and tends to overpredict osmotic pressure and thus underpredict permeate fluxes. However, the opposite becomes true at higher TDS values for typical produced waters. The scaling potential of these waters is also computed by allowing the precipitation of minerals above their saturation limit on the RO membrane. This work demonstrates how reactive transport models developed for the analysis of waters from geological systems can be extended to improve process design, optimization, and control in desalination systems from produced waters and beyond.

Molins, Sergi↗
DOE OSTI2023

Revolutionizing Lithium Storage Capabilities in TiO 2 by Expanding the Redox Range

TiO 2 is a widely recognized intercalation anode material for lithium-ion batteries (LIBs), yet its practical capacity is kinetically constrained due to sluggish lithium-ion diffusion, leading to a lithiation number of less than 1.0 Li + (336 mAh g -1 ). Here, the growth of TiO 2 crystallites is restrained by integrating Si into the TiO 2 framework, thereby enhancing the charge transfer and creating additional active sites potentially residing at grain boundaries for Li + storage. This strategy is corroborated by the expanded redox range of Ti, as thoroughly demonstrated via synchrotron radiation-based X-ray spectroscopy and Cs-corrected electron microscopy. Consequently, when deployed for lithium storage, the tailored material achieves an extraordinarily high reversible capacity of 559 mAh g -1 , 116% of the theoretical maximum of 483 mAh g -1 calculated based on all active species, while simultaneously retaining superior rate capability and robust cycling stability. Further, this work offers fresh perspectives on the revitalization of traditional electrode materials to achieve enhanced capacities.

25 ENERGY STORAGE↗
DOE OSTI2023

Capacitive Deionization for the Extraction and Recovery of Butyrate

Separation processes underpin chemical manufacturing, energy and fuel production, resource recovery, and water purification. Capacitive deionization (CDI) is an electrochemical separation technique based on electrosorption of charged species from an aqueous solution. This work reports the development and application of CDI for the extraction and recovery of butyrate, a carboxylate anion that is key to bioenergy production, among other applications. Electrosorption of sodium butyrate was evaluated using a bench-scale CDI system with activated carbon cloth electrodes. Applying an external potential (1.2 V) enhanced the adsorption capacity of activated carbon for butyrate by 250%. Reversible electrosorption was also demonstrated by extracting and recovering butyrate at 1.2 and 0 V, respectively. Performance metrics including butyrate adsorption and desorption capacities, adsorption and desorption rates, charge efficiency, energy consumption, and recovery are reported. Furthermore, this study also investigates the long-term operational stability of the system by cycling the cell more than 1000 times using 1.2 and 0 V for charging and discharging, respectively. Subsequent physicochemical characterization indicates increased oxygen content (from similar to 2% to >8%), decreased specific surface area (by similar to 20%), and decreased pore volume (by similar to 20%), attributed to carbon oxidation. Overall, this work informs the design of CDI for organic anion separation and recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗