Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotating flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Primary instabilities and bicriticality in flow between counter-rotating cylinders

The primary instabilities and bicritical curves for flow between counter-rotating cylinders have been computed numerically from the Navier-Stokes equations assuming axial periodicity. The computations provide values of the Reynolds numbers, wavenumbers, and wave speeds at the primary transition from Couette flow for radius ratios from 0.40-0.98. Particular attention has been focused on the bicritical curves that separate (as the magnitude of counter-rotation is increased) the transitions from Couette flow to flows with different azimuthal wavenumbers m and m + 1. This lays the foundation for further analysis of nonlinear mode interactions and pattern formation occurring along the bicritical curves and serves as a benchmark for experimental studies. Preliminary experimental measurements of transition Reynolds numbers and wave speeds presented here agree well with the computations from the mathematical model.

Langford, W. F.↗
NASA NTRS1982

An experience in mesh generation for three-dimensional calculation of potential flow around a rotating propeller

An attempt is made to develop a three-dimensional, finite volume computational code for highly swept, twisted, small aspect ratio propeller blades with supersonic tip speeds, in a way that accounts for cascade effects, hub-induced flow, and nonlinear transonic effects. Attention is presently given to the generation of a computational mesh for such a complex propeller configuration, with the aim of sharing developmental process experience. The problem treated is unique, in that blade chord, blade length, hub length and blade-to-blade distance represent several characteristic length scales among which there is considerable disparity. An ad hoc mesh-generation scheme is accordingly developed.

Jou, W.-H.↗
NASA NTRS2012

Meridional Flow in Solar Cycle 24: The Impact on the Polar Magnetic Fields

Axisymmetric flows, Differential Rotation and Meridional Flow (MF), were measured by tracking the motion of magnetic elements on the surface of the Sun using data obtained by the Helioseismic and Magnetic Imager (HMI) on the NASA Solar Dynamics Observatory (SDO) Mission. HMI provides the highest resolution full ]disk magnetograms available to date. This dramatically reduces the noise in axisymmetric flows, particularly at high latitudes (i.e. near the poles). The MF was found to vary greatly from one Carrington Rotation to the next. Furthermore, a distinct north ]south difference was found in the MF at high latitudes: Flow in the South was persistently weaker than flow in the North. Conclusions will be drawn concerning the MF variability, north ]south differences, and the impact on the polar magnetic field strengths and the timing of their reversals.

Upton, Lisa↗
NASA NTRS1983

Flow in a differentially rotated cylindrical drop at low Reynolds number

A liquid drop held captive between parallel disks that are differentially rotated is a model for the swirling flows induced by crystal rotation in the floating-zone process for growing semiconductor materials. An asymptotic analysis for a cylindrical drop is presented that elucidates the structure of the axisymmetric cellular motions caused by disk rotation at low Reynolds number. Variations of meniscus shape induced by these flows are described in the limit of small capillary number. Most cellular flow fields break the bifurcation point that corresponds to the Plateau-Rayleigh limit for the length of a static drop into two disjoint shape families and lower the maximum stable drop length. This effect is studied by a singular bifurcation analysis.

Harriott, G. M.↗
NASA NTRS2006

Measurement of Flow Pattern Within a Rotating Stall Cell in an Axial Compressor

Effective active control of rotating stall in axial compressors requires detailed understanding of flow instabilities associated with this compressor regime. Newly designed miniature high frequency response total and static pressure probes as well as commercial thermoanemometric probes are suitable tools for this task. However, during the rotating stall cycle the probes are subjected to flow direction changes that are far larger than the range of probe incidence acceptance, and therefore probe data without a proper correction would misrepresent unsteady variations of flow parameters. A methodology, based on ensemble averaging, is proposed to circumvent this problem. In this approach the ensemble averaged signals acquired for various probe setting angles are segmented, and only the sections for probe setting angles close to the actual flow angle are used for signal recombination. The methodology was verified by excellent agreement between velocity distributions obtained from pressure probe data, and data measured with thermoanemometric probes. Vector plots of unsteady flow behavior during the rotating stall regime indicate reversed flow within the rotating stall cell that spreads over to adjacent rotor blade channels. Results of this study confirmed that the NASA Low Speed Axial Compressor (LSAC) while in a rotating stall regime at rotor design speed exhibits one stall cell that rotates at a speed equal to 50.6 percent of the rotor shaft speed.

Lepicovsky, Jan↗
NASA NTRS2020

Experimental Validation of Nozzle Flow Simulations for Rotating Detonation Rocket Engines

Rotating detonation engines (RDEs) promise increased thermodynamic performance that may significantly enhance the capabilities of current rocket platforms. Little work has been conducted thus far to characterize the effect of nozzle design on high chamber pressure RDEs. Previous computational work was completed to understand the nozzle performance of the Purdue methane/oxygen rocket RDE. A new experimental study on a similar kerosene/oxygen RDE was conducted to validate the results of the computational study. Both a nozzleless geometry and several aerospike designs were hot-fire tested. New pressure instrumentation on the different nozzle surfaces were included to better understand the flow physics unique to RDE chamber exit conditions. Both the previous computational study and the new experimental results confirmed that for a nozzleless geometry, the RDE cycle enhances suction on the base region, an important result to determining RDE engine performance separate from nozzle effects. While the aerospike experiments showed agreement with computational results, delay of flow separation due to the RDE cycle could not be confirmed. Two aerospike geometries with different nozzle pressure ratios were experimentally evaluated. This study showed both the strength and the necessity for 3D transient computations to better understand the RDE flow field with nozzle geometries.

Alexis J Harroun↗
NASA NTRS1983

Thermally driven flow in a rotating spherical shell Axisymmetic states

A spherical analogue of the rotating annulus experiments modeling atmospheric motion, in which a liquid is contained between two rigid, corotating and concentric hemispheres upon both of which thermal gradients are imposed, is presently studied by means of numerical models. Temperatures are lower on the inner than on the outer sphere, and decrease towards the pole. Using Navier-Stokes equations which assume symmetry about the polar axis, finite difference numerical models yield steady-state solutions to the equations. Hydrostatic and nonhydrostatic solutions are compared for cylindrical and spherical cases, and it is found in the case of the spherical shell that the differences between hydrostatic and nonhydrostatic solutions are small and largely confined to the regions near the pole and equator. It is suggested that nonhydrostatic effects on the axisymmetric state will not affect the flow's baroclinic stability.

Miller, T. L.↗
NASA NTRS1992

A code validation strategy and facility for nonequilibrium, reacting flows

The rotational and vibrational population distributions in a hypersonic flow of hot iodine vapor were investigated using a pilot wind tunnel. The tunnel provides run times of about 20 min, with a scale-up to a larger facility appearing to be possible. It will provide a 20-cm-diameter, Mach 9 flow of iodine vapor with only small amounts of free stream nonequilibrium. An analysis of the flow response to a normal shock wave indicates that significant chemistry will occur in model flow fields in the larger facility.

Muntz, E. P.↗
NASA NTRS1981

Observations of large-scale motions of the Sun

Recent observations of large-scale mass motions on the Sun are discussed. The principal large-scale velocity flows are convection, rotation, meridional flow, and torsional and radial oscillations.

Labonte, B.↗