Search NASA⌕ Search

SEARCH · Search NASA

Results for “segmentation averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Fracture length data for geothermal applications

Fracture lengths govern permeability and are unknowns in geothermal assessment. Along their lengths, fracture widths vary due to growth by linkage. Under the influence of diagenesis, narrow widths seal, breaking porosity continuity and reducing open length. The largest range of widths and thus susceptibility to fill occurs where fractures are linked by narrow segments. Outcrops of a geothermal target, Cambrian Potsdam quartz arenite, contain opening-mode fractures having lengths spanning five orders of magnitude from 0.082 mm to 17.9 m. Combined lengths measured at a range of scales can be described by power laws, but at a given image resolution, lengths are best fit by exponential functions. Owing to preferential sealing of small fractures, open fractures follow exponential functions, but values depend on rules for designating fractures as continuous. En échelon segments, offset 10 mm, are connected by narrow fractures or microfractures (hard linked) not evident on outcrop 1 m-elevation LiDAR or 30 m-height drone images. A rule that identifies where narrow and likely connected segments are located can yield lengths meaningful for flow simulation. Depending on diagenesis, continuity rules can halve or double average and maximum length values. Length values from outcrop for geothermal applications should be adjusted based on wellsite-specific diagenesis information.

15 GEOTHERMAL ENERGY↗

Feedback Control of an Azimuthal Oscillation in the E x B Discharge of Hall Thrusters

Feedback control of a low-frequency azimuthal wave known as a "rotating spoke" in the ExB discharge of a cylindrical Hall thruster was demonstrated. The rotating spoke is an m=1 azimuthal variation in density, electron temperature, and potential that rotates at about 10% of the local E x B electron rotation speed. It causes increased electron transport across the magnetic field and is suspected to be an ionization wave. Feedback control of this wave required special consideration because, although it causes a rotating azimuthal variation in the current density to the anode, it does not show up as a signal in the total thruster discharge current. Therefore, an extra source of information was needed to track the oscillation, which was addressed by using a special anode that was split azimuthally into four segments. The current to each segment oscillates as the rotating spoke passes over it, and feedback is accomplished by resistors connected in series with each anode segment which cause the voltage on a segment to decrease in proportion to the current through that segment. The feedback resulted in the disappearance of a coherent azimuthal wave and a decrease in the time-averaged total discharge current by up to 13.2%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of Ancient Fluvial Patterns on the Surface of Mars

This project involves the study of ancient fluvial patterns on the surface of Mars, including raised curvilinear features (RCFs) and negative relief channels. It requires the use of geological images provided by the Mars Reconnaissance Orbiter to determine how water shaped the surface of Mars in the form of rivers, lakes and/or oceans approximately 3.5 billion years ago, during the Noachian period. The role of the intern is to examine the images and record the corresponding measurements of ancient river systems in an Excel spreadsheet to assist in determining the Noachian water cycle on Mars. Resources used to make these measurements include the Arena software, hand-drawn sketch maps, Microsoft Word, Microsoft Excel and the images provided by the Mars Reconnaissance Orbiter. The Context Imager (CTX) returns black and white images at a resolution of six meters per pixel. The camera can take images with a width of 30 km and a length of 160 km. Seventeen images were observed in total. Images are analyzed and notes are taken concerning their terminal deposits, stream ordering and drainage pattern. The Arena software is utilized to make the images more visible by allowing control of contrast and magnification. Once the image is adjusted, measurements: length, average width, drainage basin area, sinuous ridge area are recorded, at a magnification of one, through using the line segment and polygon tools. After an image has been analyzed and measured, a sketch map is drawn in order to clearly identify the various segments, basins and terminal deposits the intern observed. Observations are used to further classify the fluvial patterns; their drainage pattern is defined as dendritic, parallel, trellis, rectangular, radial, centripetal, deranged or discordant. Once observational notes are completed, mathematical relations are used to determine drainage density, stream frequency, theoretic basin area and sinuosity index. These data will be added to a larger data set that will yield a comprehensive view of early Mars drainage systems. The data obtained from the work conducted will be used to characterize the nature and behavior of water on the surface of Mars. Thorough understanding of the Martian water cycle will serve as biologically significant information. Through working on this project, I acquired insight into the study of planet Mars, and skills in the Arena software as well as the organization of a vast amount of data.

Jethani, Henna↗

Impact Forces From Artificial and Real Birds on a Large Diameter Hopkinson Bar

Forces were measured from normal impacts with two different artificial bird recipes and two species of real birds on a very rigid flat surface. The tests were conducted by launching the soft body projectiles axially into a Hopkinson bar in accordance with the SAE AS6940 test standard at three different nominal impact conditions: (a) a 1 kg projectile at an impact velocity of 49 m/sec; (b) a 1.8 kg projectile at an impact velocity of 110 m/sec; and (c) a 1.8 kg projectile at an impact velocity of 310 m/sec. At each condition two artificial birds and one real bird projectile were tested with at least three test repeats. Simulations were conducted to assess the effects of projectile orientation and velocity on predicted forces. The Hopkinson bar consisted of an Aluminum 6061 solid cylindrical bar with a diameter of 305 mm and a length of 7.31 m, made up of two 3.66 m long sections that were in axial contact with each other. The bar was instrumented for strain measurement at two locations, 457.2 mm and 609.6 mm (1.5 and 2 diameters) from the impacted face. Forces were calculated from the measured strain. In addition, digital image correlation (DIC) was used to measure the velocity of the free end of the bar. The real bird projectiles were 1 kg Mallard ducks and 1.8 kg Golden Comet chickens that were prepared per ASTM F330-21. Prior to testing, the real birds were placed in muslin bags to minimize tumbling during flight. Two artificial bird formulations were tested, one produced by the University of Dayton Research Institute (UDRI) and the other by the German Aerospace Center, DLR. The UDRI projectile was a homogeneous, relatively soft solid, formulated with a mixture of water, gelatin and phenolic micro-balloons to achieve a nominal density of 0.95 g/cc. The DLR projectile consisted of a printed plastic shell with internal plastic ribs and filled with a gel material. The projectiles were designed such that the overall average density was the desired value of 0.95 g/cc. Initial testing showed that contact between the two Hopkinson bar segments was not sufficient to allow full transmission of the waves through the interface. For the 49 m/sec and 110 m/sec tests this resulted in reflections returning to the strain measurement site prior to the end of the impact. For these tests only a portion of the force pulse could be accurately measured. For the highest velocity tests at 310 m/sec the force pulse was complete by the time reflected waves interfered with the response. Despite this limitation, useful force data were obtained for all velocities. Impact forces were very sensitive to the impact orientation and velocity. The force history generally consisted of an initial region with varying amplitude followed by a relatively constant amplitude response. The steady state region was similar among all projectiles and similar to what would be predicted for an inviscid fluid with a density of 0.95 g/cc. The initial part of the force response exhibited varying degrees of test-to-test repeatability associated with each projectile type. Forces calculated from DIC velocity measurements of the free end of the bar compared favorably those from the strain measurements. In general, the artificial projectile impact forces were quite repeatable from test to test, with some exceptions which could be explained by issues associated with either the projectile itself or with how the projectile exited the gun barrel. For all impact velocities the initial portion of the impact force from the bird projectiles exhibited large test-to-test variability. In this paper, impact forces for three types of projectiles at three impact velocities will be presented with an emphasis on the test-to-test repeatability of the results. Based on test and simulation results a proposed method for normalizing the impact force to minimize effects of differences in projectile orientation, impact velocity and density will also be discussed.

Bird strike↗

Automatic Diabetic Macular Edema Detection in Fundus Images Using Publicly Available Datasets

Diabetic macular edema (DME) is a common vision threatening complication of diabetic retinopathy. In a large scale screening environment DME can be assessed by detecting exudates (a type of bright lesions) in fundus images. In this work, we introduce a new methodology for diagnosis of DME using a novel set of features based on colour, wavelet decomposition and automatic lesion segmentation. These features are employed to train a classifier able to automatically diagnose DME. We present a new publicly available dataset with ground-truth data containing 169 patients from various ethnic groups and levels of DME. This and other two publicly available datasets are employed to evaluate our algorithm. We are able to achieve diagnosis performance comparable to retina experts on the MESSIDOR (an independently labelled dataset with 1200 images) with cross-dataset testing. Our algorithm is robust to segmentation uncertainties, does not need ground truth at lesion level, and is very fast, generating a diagnosis on an average of 4.4 seconds per image on an 2.6 GHz platform with an unoptimised Matlab implementation.

59 BASIC BIOLOGICAL SCIENCES↗

Angular Averaged Profiling of the Radial Electric Field in Compensated FTICR Cells

A recent publication from this laboratory (1) reported a theoretical analysis comparing approaches for creating harmonic ICR cells. We considered two examples of static segmented cells - namely, a seven segment cell developed in this laboratory (2) and one described by Rempel et al (3), along with a recently described dynamically harmonized cell (4). This conceptual design for a dynamically harmonized cell has now been reduced to practice and first experimental results obtained with this cell were recently reported in this journal (5). This publication reports details of cell construction and describes its performance in a 7 Tesla Fourier Transform mass spectrometer. Herein, we describe the extension of theoretical analysis presented in (1) to include angular-averaged radial electric field calculations and a discussion of the influence of trapping plates.

99 GENERAL AND MISCELLANEOUS↗

Toroidal surface complexes of bacteriophage {phi}12 are responsible for host-cell attachment

Cryo-electron tomography and subtomogram averaging are utilized to determine that the bacteriophage {phi}12, a member of the Cystoviridae family, contains surface complexes that are toroidal in shape, are composed of six globular domains with six-fold symmetry, and have a discrete density connecting them to the virus membrane-envelope surface. The lack of this kind of spike in a reassortant of {phi}12 demonstrates that the gene for the hexameric spike is located in {phi}12's medium length genome segment, likely to the P3 open reading frames which are the proteins involved in viral-host cell attachment. Based on this and on protein mass estimates derived from the obtained averaged structure, it is suggested that each of the globular domains is most likely composed of a total of four copies of P3a and/or P3c proteins. Our findings may have implications in the study of the evolution of the cystovirus species in regard to their host specificity. - Research Highlights: > Subtomogram averaging reveals enhanced detail of a {phi}12 cystovirus surface protein complex. > The surface protein complex has a toroidal shape and six-fold symmetry. > It is encoded by the medium-size genome segment. > The proteins of the surface complex most likely are one copy of P3a and three copies of P3c.

60 APPLIED LIFE SCIENCES↗

Level-set segmentation of pulmonary nodules in megavolt electronic portal images using a CT prior

Purpose: Pulmonary nodules present unique problems during radiation treatment due to nodule position uncertainty that is caused by respiration. The radiation field has to be enlarged to account for nodule motion during treatment. The purpose of this work is to provide a method of locating a pulmonary nodule in a megavolt portal image that can be used to reduce the internal target volume (ITV) during radiation therapy. A reduction in the ITV would result in a decrease in radiation toxicity to healthy tissue. Methods: Eight patients with nonsmall cell lung cancer were used in this study. CT scans that include the pulmonary nodule were captured with a GE Healthcare LightSpeed RT 16 scanner. Megavolt portal images were acquired with a Varian Trilogy unit equipped with an AS1000 electronic portal imaging device. The nodule localization method uses grayscale morphological filtering and level-set segmentation with a prior. The treatment-time portion of the algorithm is implemented on a graphical processing unit. Results: The method was retrospectively tested on eight cases that include a total of 151 megavolt portal image frames. The method reduced the nodule position uncertainty by an average of 40% for seven out of the eight cases. The treatment phase portion of the method has a subsecond execution time that makes it suitable for near-real-time nodule localization. Conclusions: A method was developed to localize a pulmonary nodule in a megavolt portal image. The method uses the characteristics of the nodule in a prior CT scan to enhance the nodule in the portal image and to identify the nodule region by level-set segmentation. In a retrospective study, the method reduced the nodule position uncertainty by an average of 40% for seven out of the eight cases studied.

60 APPLIED LIFE SCIENCES↗

Approximately 15% of Miscanthus yield is lost at current commercial cutting heights in Iowa

Various works have quantitatively characterized the effects of environmental and management factors on Miscanthus x giganteus Greef et Deu (mxg) yield and, therefore, anticipated land requirement per unit production. However, little work has addressed the effects of cutting height, which may significantly contribute to the difference between the standing aboveground biomass at harvest (i.e., biological yield) and harvested yield. This study quantitatively characterized the effect of cutting height using a replicated nitrogen trial of a 5-year-old mxg stand in southeast Iowa and related this information to observations of cutting height in nearby commercial fields. Nitrogen fertilizer did not significantly change the relationship of the stem segment mass to length, and overall, a 1-cm stem segment contributes 0.5% of the total stem biomass within the bottom 44 cm of the stem. This results in an average harvest loss of 15% of the aboveground standing biomass when cutting at 30 cm, typically seen in commercial mxg fields in eastern Iowa. Cutting height should be considered when accurately predicting commercial mxg harvest yields and changes in soil organic carbon in a commercial mxg agroecosystem.

60 APPLIED LIFE SCIENCES↗

Chain trajectories, domain shapes, and terminal boundaries in block copolymers

The packing geometry of macromolecules in complex mesophases is of key importance to self-organization in synthetic and biological soft materials. While approximate or heuristic models rely on often-untested assumptions about how flexible molecules “fit in” to distinct locations of complex assemblies, physical assemblies derive from ensembles of fluctuating conformations, obscuring the connection between mesophase geometry and the underlying arrangements. Here, we present an approach to extract and analyze features of molecular packing in diblock block copolymer (BCP) melts, a prototypical soft matter system, based on the statistical description of chain conformations in self-consistent field (SCF) theory. We show how average BCP chain trajectories in ordered morphologies can be analyzed from the SCF-derived orientational order parameter of chain segments. We use these extracted trajectories to analyze the features of local packing geometry, including chain bending and tilt, as well as the terminal boundaries that delineate distinct domains in ordered BCP morphologies. In conclusion, we illustrate this analysis by focusing on measurable features of packing frustration in 2D (columnar) and 3D (spherical and bicontinuous) morphologies, notably establishing an explicit link between chain conformations in complex morphologies and their medial geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A general kinetic framework for dislocation mobility derived from probabilistic cellular automaton simulations of the kink-pair mechanism

Dislocation mobility laws are essential components of dislocation-density-based crystal plasticity models. For dislocations governed by the kink-pair mechanism, however, existing formulations are typically limited to specific regimes due to the com plex interplay between stochastic kink-pair nucleation and lateral kink migration. In this work, we develop a general kinetic framework that expresses the average dislocation velocity as a function of mechanism-level variables: positive/negative kink pair nucleation rates, kink migration velocity, dislocation segment length, critical kink-pair width, and kink height. Probabilis tic cellular automaton simulations are used to capture the behavior of conceptual dislocation segments between the limiting conditions of migration outpacing nucleation on the one end and nucleation outpacing migration on the other. An elemen tary functional form that captures the system dynamics is suggested and fitted against the simulation results. This framework remains valid for arbitrary combinations of the six variables and is, therefore, compatible with any admissible constitutive re lations that describe their stress and temperature dependence. Comparisons with established approaches and experimental results confirm the robustness and physical consistency of the formulation, making it broadly applicable to material systems in which dislocation motion is governed by the kink-pair mechanism.

36 MATERIALS SCIENCE↗

A minimum spanning forest based classification method for dedicated breast CT images

Purpose: To develop and test an automated algorithm to classify different types of tissue in dedicated breast CT images. Methods: Images of a single breast of five different patients were acquired with a dedicated breast CT clinical prototype. The breast CT images were processed by a multiscale bilateral filter to reduce noise while keeping edge information and were corrected to overcome cupping artifacts. As skin and glandular tissue have similar CT values on breast CT images, morphologic processing is used to identify the skin based on its position information. A support vector machine (SVM) is trained and the resulting model used to create a pixelwise classification map of fat and glandular tissue. By combining the results of the skin mask with the SVM results, the breast tissue is classified as skin, fat, and glandular tissue. This map is then used to identify markers for a minimum spanning forest that is grown to segment the image using spatial and intensity information. To evaluate the authors’ classification method, they use DICE overlap ratios to compare the results of the automated classification to those obtained by manual segmentation on five patient images. Results: Comparison between the automatic and the manual segmentation shows that the minimum spanning forest based classification method was able to successfully classify dedicated breast CT image with average DICE ratios of 96.9%, 89.8%, and 89.5% for fat, glandular, and skin tissue, respectively. Conclusions: A 2D minimum spanning forest based classification method was proposed and evaluated for classifying the fat, skin, and glandular tissue in dedicated breast CT images. The classification method can be used for dense breast tissue quantification, radiation dose assessment, and other applications in breast imaging.

60 APPLIED LIFE SCIENCES↗

Data for Approximately 15% of Miscanthus Yield is Lost at Current Commercial Cutting Heights in Iowa

Various works have quantitatively characterized the effects of environmental and management factors on Miscanthus x giganteus Greef et Deu ( mxg ) yield and, therefore, anticipated land requirement per unit production. However, little work has addressed the effects of cutting height, which may significantly contribute to the difference between the standing aboveground biomass at harvest (i.e., biological yield) and harvested yield. This study quantitatively characterized the effect of cutting height using a replicated nitrogen trial of a 5-year-old mxg stand in southeast Iowa and related this information to observations of cutting height in nearby commercial fields. Nitrogen fertilizer did not significantly change the relationship of the stem segment mass to length, and overall, a 1-cm stem segment contributes 0.5% of the total stem biomass within the bottom 44 cm of the stem. This results in an average harvest loss of 15% of the aboveground standing biomass when cutting at 30 cm, typically seen in commercial mxg fields in eastern Iowa. Cutting height should be considered when accurately predicting commercial mxg harvest yields and changes in soil organic carbon in a commercial mxg agroecosystem.

Biomass Analytics↗

Sampling Landsat classifications for crop area estimation

An investigation was conducted to evaluate the effect of several sampling alternatives on the accuracy of crop area estimates made from classification of Landsat Multispectral Scanner (MSS) data. The specific objective was to assess the precision and the bias associated with alternative sampling schemes involving different numbers of several sampling unit sizes. The estimates achieved using the 5 by 6 nm segments were found to have the least precision of any sampling scheme tested. The estimates become more precise as the segment size decreases and more segments are taken. The precision of the 5 by 6 nm segments was significantly less than that of the pixel samples. None of the sampling schemes was significantly biased on the average, and none of the average estimates differed significantly from the population parameter. The maximum absolute deviation, however, was directly related to sampling unit size and should be considered in selection of a sampling unit.

Hixson, M. M.↗

Sawtooth segmentation and deformation processes on the southern San Andreas fault, California

Five contiguous 12-13 km fault segments form a sawtooth geometry on the southernmost San Andreas fault. The kinematic and morphologic properties of each segment depend on fault strike, despite differences of strike between segments of as little as 3 degrees. Oblique slip (transpression) of fault segments within the Indio Hills, Mecca Hills and Durmid Hill results from an inferred 8:1 ratio of dextral slip to convergence across the fault zone. Triggered slip and creep are confined almost entirely to transpressive segments of the fault. Durmid Hill has been formed in the last 28 + or - 6 ka by uplift at an average rate of 3 + or - 1 mm/a.

Bilham, R.↗

Ozone Profiles in the Baltimore-Washington Region (2006-2011): Satellite Comparisons and DISCOVER-AQ Observations

Much progress has been made in creating satellite products for tracking the pollutants ozone and NO2 in the troposphere. Yet, in mid-latitude regions where meteorological interactions with pollutants are complex, accuracy can be difficult to achieve, largely due to persistent layering of some constituents. We characterize the layering of ozone soundings and related species measured from aircraft over two ground sites in suburban Washington, DC (Beltsville, MD, 39.05N; 76.9W) and Baltimore (Edgewood, MD, 39.4N; 76.3W) during the July 2011 DISCOVER-AQ (Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality) experiment. First, we compare column-ozone amounts from the Beltsville and Edgewood sondes with data from overpassing satellites. Second, processes influencing ozone profile structure are analyzed using Laminar Identification and tracers: sonde water vapor, aircraft CO and NOy. Third, Beltsville ozone profiles and meteorological influences in July 2011 are compared to those from the summers of 2006-2010. Sonde-satellite offsets in total ozone during July 2011 at Edgewood and Beltsville, compared to the Ozone Monitoring Instrument (OMI), were 3 percent mean absolute error, not statistically significant. The disagreement between an OMIMicrowave Limb Sounder-based tropospheric ozone column and the sonde averaged 10 percent at both sites, with the sonde usually greater than the satellite. Laminar Identification (LID), that distinguishes ozone segments influenced by convective and advective transport, reveals that on days when both stations launched ozonesondes, vertical mixing was stronger at Edgewood. Approximately half the lower free troposphere sonde profiles have very dry laminae, with coincident aircraft spirals displaying low CO (80-110 ppbv), suggesting stratospheric influence. Ozone budgets at Beltsville in July 2011, determined with LID, as well as standard meteorological indicators, resemble those of 4 of the previous 5 summers. The penetration of stratospheric air throughout the troposphere appears to be typical for summer conditions in the Baltimore-Washington region.

satellite validation↗

Cutting-Balloon Angioplasty Versus Balloon Angioplasty as Treatment for Short Atherosclerotic Lesions in the Superficial Femoral Artery: Randomized Controlled Trial

Purpose: To evaluate the treatments of a short-segment atherosclerotic stenosis in the superficial femoral arteries with the cutting balloon angioplasty (CBA) versus conventional balloon angioplasty [percutaneous transluminal angioplasty (PTA)] in a randomized controlled trial. Material and Methods: The study group comprised 60 patients (33 men, 27 women; average age 64 years) with a short ({<=}5 cm) focal SFA de novo atherosclerotic stenosis associated with a history of intermittent claudication or rest pain. The primary end point of this study was the rate of binary restenosis in the treated segment 12 months after the intervention. All patients were evenly randomized to either the PTA or CBA treatment arms. Follow-up angiograms and ankle-brachial index (ABI) measurements were performed after 12 months. The evaluation of the restenosis rates and factors influencing its occurrence were calculated by logistic regression analysis. Results: In the intention-to-treat analysis, restenosis rates after 2-month follow-up were 9 of 30 (30 %) in the PTA group and 4 of 30 (13 %) in the CBA group (p = 0.117). In the actual treatment analysis, after exclusion of patients who required nitinol stent placement for a suboptimal result after angioplasty alone (5 patients in the PTA group and none in the CBA group), restenosis rates were 9 of 25 (36 %) and 4 of 30 (13 %), respectively (p = 0.049). In the intention-to-treat analysis there were also significant differences in ABI values between the PTA and CBA groups at 0.77 {+-} 0.11 versus 0.82 {+-} 0.12, respectively (p = 0.039), at 12 months. Conclusion: Based on the presented results of the trial, CBA seems to be a safer and more effective than PTA for treatment of short atherosclerotic lesions in the superior femoral artery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Performance of Dispersed Fringe Sensor in the Presence of Segmented Mirror Aberrations - Modeling and Simulations

Wavefront aberrations will lower the DFS fringe visibility and DFS signal SNR. The specific effect of wavefront aberration on DFS depends on the aberration type. Due to the "pixel spatial filter" effect the extracted DFS signal can tolerate moderate amount of wavefront aberrations..By averaging piston detection results from multiple traces extracted from fringe images DFS can further increase its robustness against wavefront aberration. Line-of-sight jitter can cause significant loss of fringe visibility will affect more on the aberrated system..Modeling results have shown that gravity sag on the JWST segment mirror during I&T will lower the DHS fringe visibility by factor of 2-3X and lower the DHS signal intensity by factor of approx.5X. Under gravity sag the RMS DHS detection error approx. 100 nm.

James Webb Space Telescope (JWST)↗