Search NASA⌕ Search

SEARCH · Search NASA

Results for “self”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Instabilities in self-focused electron beams

The appearance of large amplitude oscillations and attenuation of beam current have been observed in high perveance electrically self-focused beams. These phenomena are shown to be due to instabilities produced by the interaction of the beam with its self-generated plasma. The critical current which must be exceeded for the instabilities to appear and the frequencies of the oscillations have been related to beam and background parameters and the dimensions of the experimental system.

Gibson, R. A.↗
NASA NTRS1974

Development of self-acting seals for helicopter engines

An experimental evaluation of a NASA-designed self-acting face seal for use in advanced gas turbine main shaft positions was conducted. The seal incorporated Rayleigh step pads (self-acting geometry) for lift augmentation. Satisfactory performance of the gas film seal was demonstrated in a 500-hour endurance test at speeds to 183 m/s (600 ft/sec, 54,000 rpm) and air pressure differential of 137 newtons per square centimeter (198.7 psi). Carbon wear was minor. Tests were also conducted with seal seat runout greater than that expected in engine operation and in a severe sand and dust environment. Seal operation was satisfactory in both these detrimental modes of operation.

Lynwander, P.↗
NASA NTRS1974

Simulation verification techniques study: Simulation self test hardware design and techniques report

The final results are presented of the hardware verification task. The basic objectives of the various subtasks are reviewed along with the ground rules under which the overall task was conducted and which impacted the approach taken in deriving techniques for hardware self test. The results of the first subtask and the definition of simulation hardware are presented. The hardware definition is based primarily on a brief review of the simulator configurations anticipated for the shuttle training program. The results of the survey of current self test techniques are presented. The data sources that were considered in the search for current techniques are reviewed, and results of the survey are presented in terms of the specific types of tests that are of interest for training simulator applications. Specifically, these types of tests are readiness tests, fault isolation tests and incipient fault detection techniques. The most applicable techniques were structured into software flows that are then referenced in discussions of techniques for specific subsystems.

Source record↗
NASA NTRS1975

Perception of linear horizontal self-motion induced by peripheral vision /linearvection/ - Basic characteristics and visual-vestibular interactions

The basic characteristics of the sensation of linear horizontal motion have been studied. Objective linear motion was induced by means of a moving cart. Visually induced linear motion perception (linearvection) was obtained by projection of moving images at the periphery of the visual field. Image velocity and luminance thresholds for the appearance of linearvection have been measured and are in the range of those for image motion detection (without sensation of self motion) by the visual system. Latencies of onset are around 1 sec and short term adaptation has been shown. The dynamic range of the visual analyzer as judged by frequency analysis is lower than the vestibular analyzer. Conflicting situations in which visual cues contradict vestibular and other proprioceptive cues show, in the case of linearvection a dominance of vision which supports the idea of an essential although not independent role of vision in self motion perception.

Berthoz, A.↗
NASA NTRS1976

Measurement of hydrogen- and self-broadened half-widths of ammonia at 200 and 300 K

The hydrogen- and self-broadened half-widths have been measured for the (nu1 + nu2) and (nu2 + nu3) bands of ammonia at 300 and 207 K. Measurement of hydrogen-broadened widths has been restricted to J and K values not exceeding 6, but that of self-broadened widths is done for a few lines outside that range. Assuming a power-law dependence of half-width on temperature, the average value of the index alpha for the lines measured is found to be 0.57 for hydrogen broadening.

Margolis, J. S.↗
NASA NTRS1976

Development of a self contained heat rejection module, phase 2 and 3

This is the final report for Phases II and III of the Development of a Self Contained Heat Rejection Module Program conducted under NASA contract NAS9-14408. The objective of this program was to perform detail design and construct a prototype test article Self Contained Heat Rejection Module (SHRM). Also to install this test article in the NASA/JSC Space Environment Simulation Laboratory Chamber A and conduct thermal vacuum demonstration and performance testing. The end product of this contract was the prototype hardware, the test article and the test results.

M L Fleming↗
NASA NTRS1976

An experimental study of a self-confined flow with ring-vorticity distribution

A new form of self-confined flow was investigated in which a recirculation zone forms away from any solid boundary. An inviscid flow analysis indicated that in a purely meridional axisymmetric flow a stationary, spherical, self-confined region should occur in the center of a streamlined divergent-convergent enlargement zone. The spherical confinement region would be at rest and at constant pressure. Experimental investigations were carried out in a specially built test apparatus to establish the desired confined flow. The streamlined divergent-convergent interior shape of the test section was fabricated according to the theoretical calculation for a particular streamline. The required inlet vorticity distribution was generated by producing a velocity profile with a shaped gauze screen in the straight pipe upstream of the test section. Fluid speed and turbulence intensity were measured with a constant-temperature hot-wire anemometer system. The measured results indicated a very orderly and stable flow field.

Lin, K. M.↗
NASA NTRS1975

Self-tuning regulators

The results of a research project are discussed for self-tuning regulators for active control. An algorithm for the self-tuning regulator is described as being stochastic, nonlinear, time variable, and not trivial.

Astrom, K. J.↗
NASA NTRS1977

Transfer of polarized radiation in self-absorbed synchrotron sources. I - Results for a homogeneous source

The solution to the equation of transfer of polarized radiation in a steady-state homogeneous rarefied medium is applied to self-absorbed synchrotron sources. Relativistic electrons (independent of the presence of any cold plasma) can quite easily produce in such sources significant Faraday rotation and/or conversion of linear to circular polarization. Structural inhomogeneities do not obviate the importance of these phenomena in compact nonthermal sources. Contrary to the calculation of Pacholczyk and Swihart (1975), the circular polarization for a homogeneous source changes sign just below the self-absorption turnover as the source becomes opaque, even when polarization conversion dominates; however, for a physically realistic source, structural inhomogeneity may alter this behavior. The observational evidence bearing upon these effects is reviewed.

Jones, T. W.↗
NASA NTRS1977

Transfer of polarized radiation in self-absorbed synchrotron sources. II - Treatment of inhomogeneous media and calculation of emergent polarization

As an extension of previous treatments of polarized radiation transfer in homogeneous synchrotron sources, a transfer procedure is derived, based on the coupled-wave formulation, which allows consideration of inhomogeneous sources. It is shown that plasma characteristic wave eccentricities in a source must be fairly large unless Faraday rotation per absorption depth is very large, and that coupling between characteristic waves can be strong in inhomogeneous self-absorbed sources. Calculations are made of the polarized radiation emergent from a source with a boundary of finite thickness. It is found that neglect of propagation effects in the source boundary introduces no significant errors at optically thin frequencies, but that below the self-absorption turnover the emergent polarization may depend significantly upon such effects. In particular, the sign of the circular polarization and the linear polarization position angle depend upon the absorption depth in the boundary region.

Jones, T. W.↗
NASA NTRS1978

Self-acting shaft seals

Self-acting seals are described in detail. The mathematical models for obtaining a seal force balance and the equilibrium operating film thickness are outlined. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis reveals three different vibration models with secondary seal friction being an important parameter. Leakage flow inlet pressure drop and affects of axisymmetric sealing face deformations are discussed. Experimental data on self-acting face seals operating under simulated gas turbine conditions are given. Also a spiral groove seal design operated to 244 m/sec (800 ft/sec) is described.

Ludwig, L. P.↗
NASA NTRS1977

Self streamlining wind tunnel: Further low speed testing and final design studies for the transonic facility

Work has continued with the low speed self streamlining wind tunnel (SSWT) using the NACA 0012-64 airfoil in an effort to explain the discrepancies between the NASA Langley low turbulence pressure tunnel (LTPT) and SSWT results obtained with the airfoil stalled. Conventional wind tunnel corrections were applied to straight wall SSWT airfoil data, to illustrate the inadequacy of standard correction techniques in circumstances of high blockage. Also one SSWT test was re-run at different air speeds to investigate the effects of such changes on airfoil data and wall contours. Mechanical design analyses for the transonic self streamlining wind tunnel (TSWT) were completed by the application of theoretical airfoil flow field data to the elastic beam and streamline analysis. The control system for the transonic facility is outlined.

Wolf, S. W. D.↗
NASA NTRS1978

Self streamlining wind tunnel: Further low speed testing and final design studies for the transonic facility

Work was continued with the low speed self streamlining wind tunnel (SSWT) using the NACA 0012-64 airfoil in an effort to explain the discrepancies between the NASA Langley low turbulence pressure tunnel (LTPT) and SSWT results obtained with the airfoil stalled. Conventional wind tunnel corrections were applied to straight wall SSWT airfoil data, to illustrate the inadequacy of standard correction techniques in circumstances of high blockage. Also one SSWT test was re-run at different air speeds to investigate the effects of such changes (perhaps through changes in Reynold's number and freestream turbulence levels) on airfoil data and wall contours. Mechanical design analyses for the transonic self-streamlining wind tunnel (TSWT) were completed by the application of theoretical airfoil flow field data to the elastic beam and streamline analysis. The control system for the transonic facility, which will eventually allow on-line computer operation of the wind tunnel, was outlined.

Wolf, S. W. D.↗
NASA NTRS1977

Superbroadening in H2O and D2O by self-focused picosecond pulses from a YAlG:Nd laser

The dielectric-breakdown intensity threshold, the critical power for self-focusing, and the power threshold for the production of spectral superbroadening have been measured in H2O and D2O. For bandwidth-limited pulses of 30 psec duration at 1.06 microns and of 21 psec duration at 0.53 micron, the superbroadening in water always required power levels sufficient for catastrophic self-focusing and intensities equal to the electric breakdown threshold.

Smith, W. L.↗
NASA NTRS1978

Comparison of satellite self-contamination experiments and scattering return flux calculations

Gaseous emissions from a spacecraft modify the orbital environment and degrade the observations of distant radiation sources. These emissions also provide contamination fluxes induced by self-scattering and scattering with ambient particles. Experiments were carried out on the orbiting Atmosphere Explorer D satellite (AE-D) to verify the calculated return fluxes of a neon source. Known rates of neon were emitted in the direction of the velocity vector on command from the MRMU (molecular return measurement unit). At 250 km the neutral mass spectrometer indicated a total neon return flux of 0.0246 times the emitted flux. The calculated fraction was 0.0123, including 0.00914 for the ambient scatter and 0.00354 for the altitude-independent self-scatter. The pressure gages indicated pressures less than 7 microtorr at altitudes from 161 to 210 km. The maximum pressure for the 161-km orbit was calculated as 0.74 microtorr.

Scialdone, J. J.↗
NASA NTRS1978

Concerning isothermal self-similar blast waves. I - One-dimensional flow and its stability. II - Two-dimensional flow and its stability

One-dimensional self-similar isothermal flow behind a blast wave propagating in a medium whose density varies with distance is investigated for the cases of one-dimensional and two-dimensional flow. The isothermal flow model is adopted as an alternative to adiabatic models of self-similar flow, which neglect heat flux. The topology of the one-dimensional flow solutions, the singularities, and the influence of boundary conditions are discussed; the instability of the isothermal blast waves against nonself-similar perturbations is also considered. The number of critical points in the two-dimensional solutions is found to vary from the number in the one-dimensional problem.

Lerche, I.↗
NASA NTRS1978

Self-acting shaft seals

Self-acting seals are described in detail. The mathematical models for obtaining a seal force balance and the equilibrium operating film thickness are outlined. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis reveals three different vibration modes, with secondary seal friction being an important parameter. Leakage flow inlet pressure drop and effects of axisymmetric and nonaxisymmetric sealing face deformations are discussed. Experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 N/sq cm and 152 m/sec sliding speed. Also a spiral groove seal design operated to 244 m/sec is described.

Ludwig, L. P.↗
NASA NTRS1978

A self-consistent model of a corotating Jovian magnetosphere

In the rotation-dominated model of the Jovian magnetosphere, proposed in the present paper, the plasma current distribution is dynamically consistent with the magnetic field. The model is constructed under the assumptions of an ionospheric plasma source without pitch angle scattering; loss-free radiation transport through flux tube interchange diffusion; and a static balance between centrifugal force and magnetic stress. Using these assumptions, a dynamic equation is derived for a self-consistent field configuration having a single adjustable parameter that is related to the plasma source strength. The equation is solved by an iterative technique. The self-consistent field resembles a radially distorted dipole field, rather than the flat magnetodisk configuration inferred from Pioneer data. The implication is that such a magnetodisk field would require an equatorial plasma source rather than a source at the feet of the field lines.

Carbary, J. F.↗