Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Comparative study of decay heat calculations with FLUKA and MCNP/CINDER2008

In designing a high-power tungsten target, decay heat driven temperature rise in the spallation volume is a safety concern during maintenance and in loss of coolant accidents. As tungsten hydrates and becomes volatile in steam at above 800 ◦C, it is important to keep the target temperature below this threshold when active cooling is unavailable. Decay heat in a target is calculated with particle transport simulation codes combined with transmutation codes. The calculated decay heat usually differs depending on the nuclear cross sections and the decay particle transport models built in the code architecture. In this paper, we calculated decay heat of a water-cooled tungsten target using popular particle transport codes, FLUKA and MCNP6® paired with CINDER2008 and compared the results. The target-moderator-reflector (TMR) system is modeled with a water-cooled solid tungsten target, water premoderators, liquid hydrogen cold moderators and beryllium reflectors. Water-cooled stainless-steel shielding is modeled around the TMR system. The tungsten volume is clad with a thin layer of erosion/corrosion resistant material. This study provides information about the uncertainty range in decay heat prediction of high-power spallation targets for hazard analysis.

Lee, Yong Joong↗
DOE OSTI2024

Proton beam power limits for stationary water-cooled tungsten target with different cladding materials

The proton beam power limit for a solid-tungsten spallation target is largely determined by beam induced thermomechanical structural loads and decay heat power deposition, while its lifetime is limited by radiation damage and fatigue life of the target materials. In this paper, we studied the power limits of a stationary water-cooled solid tungsten target concept. Tantalum clad tungsten was considered as a reference case. Being a low activation material, zircaloy 2 cladding option was studied and its decay heat driven power limit was compared with the reference case. Zirconium alloys have proven operations records in spallation target and nuclear fission environments, supported by materials data obtained from post irradiation examinations. Recent study also demonstrated feasibility of diffusion bonding zirconium to tungsten using vanadium foil inter layer. Particle transport simulations code FLUKA was used to calculate energy deposition and decay heat power deposition in the target, based on the beam parameters technically feasible at the Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory. The energy deposition data were used for flow, thermal, and structural analyses to determine the beam intensity limit on the target concept studied. The decay heat deposition data were used to calculate the transient temperature evolution in the tungsten volumes in a loss of coolant accident (LOCA) scenario to determine its beam power limit. For a 1.3 GeV proton beam, the power limit on a stationary target was 400 kW for a tantalum clad target model and 800 kW for a zircaloy 2 clad target model.

Lee, Yong Joong↗
DOE OSTI2024

Effects of delta ray electrons on measurement uncertainties of harp system

A harp system, which is a multi-wire beam profile monitoring (MWPM) system, is planned upstream of the spallation target to make in situ calibration of beam current density configuration on the target along with beam imaging from luminescent coating on the beam entrance window at the Second Target Station (STS) of the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). This beam interception-based beam diagnostics system on the target will be used to ensure that the maximum beam loads on the target are within the design range during neutron production. Current design of the harp consists of three layers of measurement wires each of which is sandwiched between voltage biasing wire planes. The signal obtained from each measurement wire layer is disturbed by secondary electrons (SE) and delta rays produced by beam-matter interactions in neighboring wires and ionization of residual gases in accelerator vacuum. While the backgrounds from SE can be suppressed by voltage biasing, the delta-ray electrons with kinetic energies above keV ranges overcome the electric potential bias. In this paper, we study the effects of delta-rays on the measurement uncertainties of MWPM using the particle transport simulation code FLUKA. Furthermore, the cases where the harp system is installed in the proximity of a large delta ray sources such as proton beam window or in the core vessel filled with sub-atmospheric gas have been studied.

Lee, Yong Joong↗
DOE OSTI2024

Modeling of Macroscopic Dynamics in Three-Dimensional Plasma Configurations (Final Technical Report)

A numerical simulation-based study to investigate the stability properties of inherently three-dimensional plasma magnetic configurations is presented. These configurations, called stellarators and heliotrons, use external helical coils to provide the twisting magnetic field that is required to confine ionized plasma particles. In contrast to the tokamak configuration, which nominally has the property of axisymmetry, electrical current does not need to be induced in stellarator and heliotron plasma. Experiments have shown that these three-dimensional configurations are remarkably robust to macroscopic instability, even when driven to relatively high levels of plasma pressure. Our understanding of how the plasma is able to withstand macroscopic instability will be enhanced by the work proposed here. The effort will generalize existing numerical modeling capability, and it will apply the new capability to model macroscopic dynamics in these three-dimensional configurations. The development work has been applied to the NIMROD simulation code (https://nimrodteam.org) that was originally based on axisymmetric problem domains. It has been generalized to accommodate the three-dimensional shaping of the plasma volume in stellarators and heliotrons. Its use of equilibrium data has also been generalized, and the implementation allows different numerical representation of the magnetic field. Analysis has been performed to inform the selection of numerical methods, and a method to accelerate the iterative solution of the necessary algebraic systems has been developed and implemented. Verification of the new NIMSTELL code on benchmark problems has also been an important part of the effort.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Proton Beam Dynamics in Bare IOTA with Intense Space-Charge

We are commissioning a 2.5~MeV proton beam for the Integrable Optics Test Accelerator at Fermilab, allowing experiments in the strong space-charge regime with incoherent betatron tune shifts nearing 0.5. Accurate modelling of space-charge dynamics is vital for understanding planned experiments. We compare anticipated emittance growth and beam loss in the bare IOTA configuration using transverse space-charge models in Xsuite, PyORBIT, and MAD-X simulation codes. Our findings reveal agreement within 30\% in core phase-space density predictions up to 100~synchrotron periods at moderate beam currents, while tail distributions and beam loss show significant differences.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

M3SF-24LL010301052-Summary of SUPCRTNE testing and Rev0 database

This progress report (Level 3 Milestone Number M3SF-24LL010301052) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Argillite Disposal R&D work package SF-24LL01030105. SUPCRTNE is being developed as the primary engine for thermodynamic database development in support of geologic disposal of high-level nuclear waste. As used here, “SUPCRT” refers to both a computer program and its supporting database. Additional letters or numbers refer to specific variants (SUPCRT92, (Johnson et al., 1992); SUPCRTBL, (Zimmer et al., 2016); and SUPCRTNE). A SUPCRT database contains the data required to calculate the thermodynamic properties of solid, gas, and aqueous species over a wide range of temperature and pressure. Normally, SUPCRT is used to create a higher-level database that directly supports modeling and simulation codes such as EQ3/6, GWB, PHREEQC, and PFLOTRAN.

58 GEOSCIENCES↗
DOE OSTI2024

Fall SULI Report

This fall, I interned under Fan Guo and Xiaocan Li in T-2 at Los Alamos National Laboratory through the SULI program. I investigated how shock thickness is impacted by collisions between particles in plasmas and how particle acceleration in shocks is impacted by the mass ratio for protons and electrons used in simulations. Both investigations were carried out using the VPIC simulation code. I found that collisions do not meaningfully impact shock width and that higher mass ratios lead to somewhat more electron acceleration in shocks. This write-up is in three parts, the first discussing a description of what I was up to personally throughout the fall, the second discussing the results of the collisional shock study, and the third discussing the results of the high mass ratio shock study.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Burnup Monitoring for Pebble Bed Reactor Systems

A pebble burnup monitoring system is a required component for domestic reactor safety and safeguards applications associated with pebble bed reactors (PBRs). One of the main requirements of a PBR burnup monitoring system is that it needs to be capable of rapid measurements to assess the burnup of each individual pebble to determine whether to recirculate it in the reactor or discard it as spent fuel. This report considers three different approaches for a burnup monitoring system for pebbles discharged from the reactor core in a pebble bed modular reactor-400: • passive gamma spectrometry measurement, • passive neutron coincidence measurement, and • active neutron counter based on the differential die-away technique. Conceptual designs have been created for each of these detectors, and preliminary analysis has been performed using Monte Carlo N-Particle and Oak Ridge Isotope Generation code simulations. The advantages and practical limitations (e.g., high radiation background) of each system were identified. Simulations suggest that each of the three measurement techniques can be successfully employed to distinguish between pebbles based on their number of passes through the core and to quantify the burnup of pebbles.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Benchmarking of ENDF/B-VIII.1 Thermal Scattering Library for Hydrogen

In correctly characterizing the energy and momentum transfer at thermal and cold energies between neutrons and its interacting medium, thermal scattering libraries, which details energy states due to the intra- and inter-molecular bond effects for the medium materials, are applied in place of free-gas cross section libraries in a particle transport simulation code. They are essential to the neutron performance of a neutron facility like SNS, where thermalized neutrons from 20 K liquid hydrogen and ambient (~300 K) water are transported to the beamlines for neutron scattering experiments in studying materials. Recently, a new version of thermal scattering library for parahydrogen and orthohydrogen at 14-20 K was developed and to be released in ENDF/B-VIII.1. It is, therefore, important to benchmark its impacts on the prediction of moderator performance due to the updates in the thermal scattering library. In this study, the recent ENDF/B-VIII.1 thermal scattering library was compared to the current ENDF/B-VII.1 one in the neutron performance calculations for the decoupled and coupled hydrogen moderators at SNS under theorized and real working conditions. In addition, the predictions using both thermal scattering libraries were benchmarked to the measurements of moderator performance. The consistency between the libraries was observed mostly for parahydrogen and the difference in orthohydrogen at cold neutron energies was noted.

Lu, Wei [Oak Ridge National Laboratory (ORNL), Oak↗
DOE OSTI2025

Gray-Scott reaction-diffusion

This dataset consists of 1000 records in a single HDF5 file generated from the simulation code available at: https://github.com/lezahlie/greyscott_simulation. More about the Gray-Scott model is explained here https://visualpde.com/nonlinear-physics/gray-scott.html.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Poisson's Equations for Electrostatics

This dataset consists of 1000 records in a single HDF5 file generated from the simulation code available at: https://github.com/lezahlie/esp_simulation. This code implements Poisson’s equations for electrostatics and more can be read about it here: https://en.wikipedia.org/wiki/Poisson%27s_equation#Electrostatics

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Cloverleaf Data Artifacts for ArtIMis LDRD

This report summarizes the use of the open-source CloverLeaf/CloverLeaf3D mini-apps to generate synthetic data sets to train foundation models for the ArtIMis LDRD DI. These data artifacts are intended to be used by LANL collaborators and shared externally with our university and institutional partners. Note that CloverLeaf/CloverLeaf3D is not a LANL simulation code.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Dataset_for_Conserved_macromolecular_architecture_of_Poplar_secondary_cell_walls_revealed_by_ssNMR_and_atomistic_modeling

This dataset contains solid-state 13C NMR data and atomistic molecular dynamics simulation files supporting the study of nanoscale secondary cell wall architecture across 13 genetically diverse Populus trichocarpa genotypes grown under uniform greenhouse conditions in 13C-enriched CO2 atmospheres (~89% 13C enrichment).The dataset contains two collections of solid-state 13C NMR data. (1) 200 MHz data (Bruker Avance III HD, 4 mm HX probe, 10 kHz MAS): raw Bruker TopSpin experiment folders and DMFIT-exported ascii spectra for selective and non-selective 1D 13C-13C spin diffusion experiments (3000 ms mixing) used to quantify inter-polymer spatial proximities, and short-mixing (1 ms) reference spectra used for polymeric abundance quantification by spectral deconvolution. (2) 600 MHz data (Bruker Avance III, 1.6 mm PhoenixNMR HXY probe, 30 kHz MAS): raw Bruker TopSpin experiment folders containing 2D CORD, 2D CP-INADEQUATE, and 13C/1H relaxation (T1, T1rho) experiments for all 13 genotypes, with processed Excel workbooks per experiment type. Molecular dynamics simulation code, coordinate files, and analysis scripts (NAMD/CHARMM/Python) for six atomistic cell wall models are included. Summarized ssNMR data are compiled into a single excel file and subjected to statistical analysis. Multivariate analysis code (PCA, Pearson correlation) and summary data are provided as excel worksheets and Jupyter notebooks (Python 3).

09 BIOMASS FUELS↗
DOE OSTI2025

Do We Know How to Model Reionization?

I compare the power spectra of the radiation fields from two recent sets of fully-coupled simulations that model cosmic reionization: “Cosmic Reionization On Computers” (CROC) and “Thesan”. While both simulations have similar power spectra of the radiation sources, the power spectra of the photoionization rate are significantly different at the same values of cosmic time or the same values of the mean neutral hydrogen fraction. However, the power spectra of the photoionization rate can be matched at large scales for the two simulations when the matching snapshots are allowed to vary independently. I.e., on large scales, the clustering of the radiation field in two simulations evolves similarly, but the exact timing of this evolution is different in different simulations and is not parameterized by an easily interpretable physical quantity like the mean neutral fraction or the mean free path. On small scales, large differences are present and remain partially unexplained. Both CROC and Thesan use the Variable Eddington Tensor approximation for modeling radiative transfer, but adopt different closure relations (optically thin OTVET versus M1). The role of this key difference is tested by using smaller simulations with a new cosmological simulation code that implements both closure relations in a controlled environment (the same hydro, cooling, and gravity solvers and the star formation recipe). In these controlled tests, both the M1 closure and the OTVET ansatz follow the expected behavior from a simple analytical approximation, demonstrating that the differences in the 2-point function of the radiation field induced by the choice of the Eddington tensor are not dominant.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Data for "Propagation of EMIC Waves from Shabansky Orbits in the Dayside Magnetosphere"

Full-wave simulations of electromagnetic ion cyclotron waves in a non-dipole compressed magnetic field have been conducted using the Petra-M simulation code. The manuscript investigates the effect of misalignment of the Faraday screen and electron density in the scrape-off layer on the excitation and propagation of fast helicon and slow mode waves.

Magnetosphere: outer↗
DOE OSTI2025

PCMS: Parallel Coupler For Multimodel Simulations

This paper presents the Parallel Coupler for Multimodel Simulations (PCMS), a new GPU accelerated generalized coupling framework for coupling simulation codes on leadership class supercomputers. PCMS includes distributed control and field mapping methods for up to five dimensions. For field mapping PCMS can utilize discretization and field information to accommodate physics constraints. PCMS is demonstrated with a coupling of the gyrokinetic microturbulence code XGC with a Monte Carlo neutral transport code DEGAS2 and with a 5D distribution function coupling of an energetic particle transport code (GNET) to a gyrokinetic microturbulence code (GTC). Weak scaling is also demonstrated on up to 2,080 GPUs of Frontier with a weak scaling efficiency of 85%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1977

Dynamic response and stability analysis of flexible, multibody systems

A general version of Lagrange's equations, including auxiliary nonholonomic, rheonomic conditions of constraint, is used in the dynamic simulation and stability analysis of interconnected flexible bodies. Modeling of the nonlinear flexible/rigid dynamic coupling effects, the interaction forces/torques, and the elastic deformation effects is discussed. A digital computer program is developed to obtain time-domain solution for the nonlinear response of systems represented as a collection of individual bodies, numerical linearization of system-governing equations, time-domain solution for the perturbation response about a nominal state, and a frequency-domain stability analysis corresponding to the linearization. The digital simulation code is employed to study the dynamic behavior of a typical satellite and a spacecraft with deployable experiment booms.

Bodley, C. S.↗
NASA NTRS1978

Ionospheric modification - An initial report on artificially created equatorial Spread F

A numerical simulation code for investigating equatorial Spread F in the collisional Rayleigh-Taylor regime is utilized to follow the evolution of artificial plasma density depletions injected into the bottomside nighttime equatorial F region. The 70 km diameter hole rapidly rises and steepens, forming plasma density enhancements at altitudes below the rising hole. The distribution of enhancements and depletions is similar to natural equatorial Spread F phenomena, except it occurs on a much faster time scale. These predictions warrant carrying out artificial injection experiments in the nighttime equatorial F region.

Ossakow, S. L.↗