Search NASA⌕ Search

SEARCH · Search NASA

Results for “solarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Solar position confounds the relationship between ecosystem function and vegetation indices derived from solar and photosynthetically active radiation fluxes

Vegetation indices derived from solar and photosynthetically active radiation (PAR) sensors (i.e. radiation derived) have been under-utilized in inferring ecosystem function, despite measurement capability at hundreds of sites. This under-utilization may be attributed to reported mismatches among the seasonality of radiation- and satellite-derived vegetation indices and canopy photosynthesis; herein referred to as measurement biases. In this work, biases in radiation derived reflectance and vegetation indices were assessed using a decadal record of satellite and ground based spectroradiometer data, ecosystem phenology and CO 2 fluxes, and radiation derived vegetation indices (i.e. the Normalized Difference Vegetation Index [NDVI], the two band Enhanced Vegetation Index [EVI2]) from a high latitude tundra site (i.e. Imnaviat). At Imnaviat, we found poor correspondence between the three types of reflectance and vegetation indices, especially during the latter part of the growing season. Radiation derived vegetation indices resulted in incorrect estimates of phenological timing of up to a month and poor relationships with canopy photosynthesis (i.e. Gross Ecosystem Exchange (GEE)). These mismatches were attributed to solar position (i.e. solar zenith and azimuth angle) and a method, based on the diel visible and near-infrared albedo variation, was developed to improve the performance of the vegetation indices. The ability of radiation derived vegetation indices to infer GEE and phenological dates drastically improved once radiation derived vegetation indices were corrected for solar position associated biases at Imnaviat. Moreover, radiation derived vegetation indices became better aligned with MODerate resolution Imaging Spectroradiometer (MODIS) satellite estimates after solar position associated biases were corrected at Imnaviat and at 25 Fluxnet sites (~90 site years) across North America. Corrections developed here provide a way forward in understanding daily ecosystem function or filling large gaps in eddy covariance data at a significant number of Fluxnet sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Numerical Study of Solar Receiver Tube With Modified Surface Roughness for Enhanced and Selective Absorptivity in Concentrated Solar Power Tower

Abstract Concentrated solar power (CSP) is a reliable renewable energy source that is progressively lowering its cost of energy. However, the heat loss due to reflected and emitted radiation hinders the maximum achievable thermal efficiency for solar receiver tubes on the solar tower. Current solar selective coatings cannot withstand the high temperatures that come with state-of-the-art CSP towers often needing to be recoated soon after initial operation. We intend to use Inconel 718 with different additive manufacturing (AM) practices to construct surfaces that allow for more light-trapping to occur. By adjusting printing parameters, we can tailor a surface to allow for more absorption while diminishing emitted radiation heat loss. By using COMSOL Multiphysics, we can generate these theoretical surfaces to emulate a printed surface, and using the coupled Multiphysics we can simulate how the surface dictates radiation properties. Our results show that by having a rougher surface we can enhance the absorptivity of Inconel 718 (IN718) by 38.8%. We expect this work to transform how solar absorber tubes are manufactured without using selective coatings and supplement the US Department of Energy (DOE) 2030 SunShot Initiative.

14 SOLAR ENERGY↗
DOE OSTI2023

Furthering Advancement to Address Tough Problems Facing the Solar Energy Industry, Spurring the Next Wave of Solar Technology Innovations through Three Progressive Challenges and Cash Incentives (Final Report)

The American-Made Solar Prize is a prize competition from the U.S. Department of Energy that is designed to revitalize U.S. solar manufacturing. The competition aims to support the growth of U.S. solar manufacturing and reenergize American energy innovation by tapping into American's competitive spirit and the nation's unparalleled innovation ecosystem leveraging national labs, incubators, facilities and more. National Renewable Energy Lab (NREL) will provide technical and business advisement to the noted Solar Prize finalists. The CRADA Participant is in the process of developing a new continuous process for making silicon wafers for solar cells in a novel approach to horizontal ribbon growth. Under this CRADA, NREL will characterize the chemical, electrical, and crystallographic properties of the as-produced wafers to and work with the CRADA Participant to improve and modify processing conditions.

14 SOLAR ENERGY↗
DOE OSTI2023

High Performing Inverted Flexible Perovskite Solar Cells via Solution Phase Deposition of Yttrium-Doped SnO 2 Directly on Perovskite

Solution processing of flexible perovskite solar cells (f-PSCs) provides an avenue for scalable, high-throughput printing of lightweight, scalable, and cost-effective flexible solar cells. However, the deposition of fully solution-processed metal oxide charge transport layers on perovskites has been limited by solvent incompatibilities and high processing temperatures for metal oxide nanoparticles. In this study, we present high-performance, inverted f-PSCs from the direct deposition of yttrium doped SnO 2 nanoparticles functionalized with acetate on top of perovskite as an ink in anhydrous ethanol via blade coating. Yttrium doping improved device performance by improving the charge extraction leading with a decreased series resistance leading to improvements in the open-circuit voltage and fill factor. Furthermore, the champion power conversion efficiency for 0.1 cm 2 devices increased from 14.3% for undoped SnO 2 to 18.2% with 2% Y:SnO 2 doping, which is unprecedented for f-PSCs on ITO-PET substrate employing SnO 2 as an ETL.

14 SOLAR ENERGY↗
DOE OSTI2023

Cybersecurity Assessment for a Behind-the-Meter Solar PV System: A Use Case for the DER-CF

The world's energy production is shifting toward lower-cost, cleaner, more efficient, and sustainable sources. The increasing numbers of distributed energy resources (DERs) are allowing for the rapid transformation of electric grids toward achieving the goal of energy decarbonization. Along with cleaner and more efficient energy, however, we must also aim for a secure energy future. Solar photovoltaic (PV) systems are an important part of this transition. This paper discusses a cybersecurity risk assessment for behind-the-meter DERs using a solar PV system as a use case of the Distributed Energy Resource Cybersecurity Framework (DER-CF) developed by the National Renewable Energy Laboratory. This poster presents a conference paper on the risk assessment processes and summarizes the DER-CF's use case recommendations to strengthen the cybersecurity posture of the electric grid.

cybersecurity↗
DOE OSTI2023

Expanding Solar Access: State Community Solar Landscape (2022)

This report supports the NCSP 2025 goal by documenting existing state-level community solar policies and programs. Although the purpose of this report is to present the existing market and policy status for community solar, with increasing attention on expanding access to solar energy for LMI customers, we also discuss key considerations for incorporating energy justice into community solar policies.

14 SOLAR ENERGY↗
NASA NTRS2023

Simulation of the Solar Energetic Particle Event on 2020 May 29 Observed by Parker Solar Probe

This paper presents a stochastic three-dimensional focused transport simulation of solar energetic particles (SEPs) produced by a data-driven coronal mass ejection (CME) shock propagating through a data-driven model of coronal and heliospheric magnetic fields. The injection of SEPs at the CME shock is treated using diffusive shock acceleration of post-shock suprathermal solar wind ions. A time-backward stochastic simulation is employed to solve the transport equation to obtain the SEP time–intensity profile at any location, energy, and pitch angle. The model is applied to a SEP event on 2020 May 29, observed by STEREO-A close to ∼1 au and by Parker Solar Probe (PSP) when it was about 0.33 au away from the Sun. The SEP event was associated with a very slow CME with a plane-of-sky speed of 337 km s −1 at a height below 6 RS as reported in the SOHO/LASCO CME catalog. We compute the time profiles of particle flux at PSP and STEREO-A locations, and estimate both the spectral index of the proton energy spectrum for energies between ∼2 and 16 MeV and the equivalent path length of the magnetic field lines experienced by the first arriving SEPs. We find that the simulation results are well correlated with observations. The SEP event could be explained by the acceleration of particles by a weak CME shock in the low solar corona that is not magnetically connected to the observers.

Solar energetic particles↗
DOE OSTI2020

India Solar Resource Data: National Solar Radiation Database (NSRDB)

The National Solar Radiation Database (NSRDB) provides high-resolution solar radiation data for long periods of time, which allows user to have a clear understanding of the spatial and temporal correlation of the data to determine the true impact of solar variability on the grid. This fact sheet specifically outlines solar resource data for India included in NSRDB.

energy systems↗
DOE OSTI2025

Solar Modulation of Cosmic Nuclei over a Solar Cycle: Results from the Alpha Magnetic Spectrometer

We report the properties of precision time structures of cosmic nuclei He, Li, Be, B, C, N, and O fluxes over an 11-year solar cycle from May 2011 to November 2022 in the rigidity range from 1.92 to 60.3 GV. The nuclei fluxes show similar but not identical time variations with amplitudes decreasing with increasing rigidity. In particular, below 3.64 GV the Li, Be, and B fluxes, and below 2.15 GV the C, N, and O fluxes, are significantly less affected by solar modulation than the He flux. We observe that these differences in solar modulation are linearly correlated with the differences in the spectral indices of the cosmic nuclei fluxes. This shows, in a model-independent way, that solar modulation of galactic cosmic nuclei depends on their spectral shape. In addition, solar modulation differences due to nuclei velocity dependence on the mass-to-charge ratio (𝐴/𝑍) are not observed.

cosmic ray composition & spectra↗
DOE OSTI2025

First observations of solar halo gamma rays over a full solar cycle

We analyze 15 years of Fermi-LAT data and produce a detailed model of the Sun’s inverse-Compton scattering emission (solar halo), which is powered by interactions between ambient cosmic-ray electrons and positrons with sunlight. By developing a novel analysis method to analyze moving sources, we robustly detect the solar halo at energies between 31.6 MeV and 100 GeV, and angular extensions up to 45° from the Sun, providing new insight into spatial regions where there are no direct measurements of the Galactic cosmic-ray flux. The large statistical significance of our signal allows us to subdivide the data and provide the first 𝛾-ray probes into the time variation and azimuthal asymmetry of the solar modulation potential, finding time-dependent changes in solar modulation both parallel and perpendicular to the ecliptic plane. Our results are consistent with (but with independent uncertainties from) local cosmic-ray measurements, unlocking new probes into astrophysical processes near the solar surface.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1971

Silicon solar cells as a high-solar-intensity radiometer

The characteristics of a conventional, 1- by 2-cm, N/P, gridded silicon solar cell when used as a radiometer have been determined for solar intensity levels to 2800 mW/sq cm (20 solar constants). The short-circuit current was proportional to the radiant intensity for levels only to 700 mW/sq cm (5 solar constants). For intensity levels greater than 700 mW/sq cm, it was necessary to operate the cell in a photoconductive mode in order to obtain a linear relation between the measured current and the radiant intensity. When the solar cell was biased with a reverse voltage of -1 V, the measured current and radiant intensity were linearly related over the complete intensity range from 100 to 2800 mW/sq cm.

Spisz, E. W.↗
NASA NTRS1972

Photovoltaic solar array technology required for three wide scale generating systems for terrestrial applications: rooftop, solar farm, and satellite

Three major options for wide-scale generation of photovoltaic energy for terrestrial use are considered: (1) rooftop array, (2) solar farm, and (3) satellite station. The rooftop array would use solar cell arrays on the roofs of residential or commercial buildings; the solar farm would consist of large ground-based arrays, probably in arid areas with high insolation; and the satellite station would consist of an orbiting solar array, many square kilometers in area. The technology advancement requirements necessary for each option are discussed, including cost reduction of solar cells and arrays, weight reduction, resistance to environmental factors, reliability, and fabrication capability, including the availability of raw materials. The majority of the technology advancement requirements are applicable to all three options, making possible a flexible basic approach regardless of the options that may eventually be chosen. No conclusions are drawn as to which option is most advantageous, since the feasibility of each option depends on the success achieved in the technology advancement requirements specified.

Berman, P. A.↗
NASA NTRS1973

Solar flare observations and solar flare models

The use of solar flare models based on specific and detailed observations of solar flares is discussed. A process for determining the validity of various solar models is analyzed. The process relegates the infall-impact model for flares to a secondary role in high energy solar events. The strictly thermal infall-impact model cannot lead to temperatures greater than five million degrees K. Another process is needed to explain the high energy aspects of solar flares which are related to temperatures equal to or greater than 10 to the 7th power degrees K, nonthermal X-ray and radio emissions, white light flares, high energy particles from the sun, and gamma ray producing particles in the sun.

Hyder, C. L.↗
NASA NTRS1974

A possible correlation between maxima of the far ultraviolet solar irradiance and central meridian passages of solar magnetic sector boundaries

Satellite observations of the sun over almost five years have shown that principally two UV active longitudes have persisted over a significant portion. A comparison between the position of solar magnetic sector boundaries and UV enhancements of the sun indicates that the UV maxima tend to occur near the times when a solar sector boundary is near central meridian. An estimate of the magnitude of the variable UV solar energy input into the atmosphere resulting from the rotation of active solar longitudes is that for wavelengths less than 175 nm and down to H. Lyman-alpha it exceeds the annual variation, whereas at longer wavelengths it is less. The total observed peak-to-peak variation in the UV irradiance from 120 to 300 nm over a solar rotation is typically at least 230 ergs/sq cms.

Heath, D. F.↗
NASA NTRS1975

Flat-Plate Solar-Collector Performance Evaluation with a Solar Simulator as a Basis for Collector Selection and Performance Prediction

The use of a solar simulator for performance determination permits collector testing under standard conditions of wind, ambient temperature, flow rate and sun. The performance results determined with the simulator have been found to be in good agreement with outdoor performance results. The measured thermal efficiency and evaluation of 23 collectors are reported which differ according to absorber material (copper, aluminum, steel), absorber coating (nonselective black paint, selective copper oxide, selective black nickel, selective black chrome), type of glazing material (glass, Tedlar, Lexan, antireflection glass), the use of honeycomb material and the use of vacuum to prevent thermal convection losses. The collectors were given performance rankings based on noon-hour solar conditions and all-day solar conditions. The determination with the simulator of an all-day collector performance was made possible by tests at different incident angles. The solar performance rankings were made based on whether the collector is to be used for pool heating, hot water, absorption air conditioning, heating, or for a solar Rankine machine.

Simon, F. F.↗
NASA NTRS1975

H-alpha synoptic charts of solar activity during the first year of solar cycle 20, October 1964 - August 1965

Solar activity during the period October 28, 1964 through August 27, 1965 is presented in the form of charts for each solar rotation constructed from observations made with the chromospheric H-alpha spectra line. These H-alpha synoptic charts are identical in format and method of construction to those published for the period of Skylab observations. The sunspot minimum marking the start of Solar Cycle 20 occurred in October, 1964; therefore, charts represent solar activity during the first year of this solar cycle.

Mcintosh, P. S.↗
NASA NTRS1974

A search for solar neutrons during solar flares

A new upper limit to the 1-20 MeV neutrons produced at the sun during large solar flares was obtained as a result of measurements made by a neutron detector on board the OGO-6 satellite. It was found that the 1-20 MeV solar neutron flux for the Nov. 2, June 13, June 15, Sept. 25, and Dec. 19, 1969, solar flare events cannot be greater than 0.05 n per sq cm per sec at the 95% confidence level. These measurements are consistent with the models proposed by Lingenfelter (1969) and Lingenfelter and Ramaty (1967) for solar neutron production during solar flares.

Ifedili, S. O.↗