Search NASA⌕ Search

SEARCH · Search NASA

Results for “source separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Comparison of Detector Based and Source Based Absolute Radiance Standards

A detailed comparison of two separate radiometric calibration standards was conducted with analysis of error sources for each. One is a detector based standard, with radiance traceable to fundamental units using the electrical substitution method. The other is based on a calibrated field emission lamp (FEL) generating blackbody radiation. This study was motivated by the discontinuance of the FEL lamps by the manufacturer and a desire to calibrate sensors using non-blackbody spectral profiles. Three spectrometers were calibrated simultaneously by both methods to separate spectrometer artifacts from differences in the radiometric standards and error in the irradiance to radiance conversion procedure needed for the FEL. Conducting this study now is important to provide continuity between the extensive prior FEL based calibration database with a replacement method while calibrated FEL lamps are still available. This also begins a longer term repeatability study of the spectrometers used in this work for evaluation as calibrated transfer standards, usable with both monochromatic and broad spectrum radiance sources. Eliminating the tie to the FEL blackbody spectrum with a detector based standard allows for flexibility in the illumination source. In particular, for Earth science sensors intended for use with sunlit scenes, augmenting traditional tungsten halogen lighting with blue and ultraviolet light emitting diodes allows for a better match to the solar spectrum during laboratory testing.

radiometry↗
NASA NTRS1995

The 2RE J0241-525: A Nearby Post T-Tauri Visual Binary System

We present high spatial resolution X-ray observations, photometry and spectroscopy of the two low mass, active stars proposed as optical counterparts to the extreme ultraviolet source 2RE J0241-525 (equal to EUVE J0241-530). It is confirmed that both stars, which are of types dK7e and dM3e and separated by 22 arcsecs, are sources of soft X-ray emission and exhibit substantial chromospheric activity. Radial velocity measurements indicate that the two components are physically associated and most probably single. The projected equatorial velocities are measured as (75 +/- 3) km/s and (11.7 +/- 0.7) km/s for the hotter and cooler components, respectively, and whilst the hotter component has a relatively high photospheric lithium abundance, log N(Li) equal to 1.5 +/- 0.2, we are unable to detect any lithium in the cooler star. Isochrone fitting to this 'mini-cluster' yields an age of (3-70) Myr and a distance of (19-60) pc. An empirical comparison of the lithium abundances with those for similar stars in young clusters and associations narrows this age range to (5-30) Myr and a corresponding distance of (26-50) pc. We conclude that this object is a nearby post T-Tauri system, but we cannot locate any possible birth site. It appears unlikely that the system can have been ejected from a nearby open cluster in a two or three body encounter.

Jeffries, R. D.↗
NASA NTRS2014

Traveling-Wave Tube Amplifier Second Harmonic as Millimeter-Wave Beacon Source for Atmospheric Propagation Studies

The design and test results of a novel waveguide multimode directional coupler for a CW millimeter-wave satellite beacon source are presented. The coupler separates the second harmonic power from the fundamental output power of a traveling-wave tube amplifier. A potential application of the beacon source is for investigating the atmospheric effects on Q-band (37 to 42 GHz) and VW-band (71 to 76 GHz) satellite-to-ground signals.

Telecommunications↗
NASA NTRS2020

Comparing X-ray Color Selection in Separating X-ray Binary Classes using Color-Color-Intensity Diagrams

X-ray binaries exhibit a wide range of properties but there are few accepted methods to determine the nature of the compact object. Color-Color-Intensity diagrams have been suggested as a means of distinguishing between systems containing black holes from those containing neutron stars. However, this technique has been verified with data from only one instrument (RXTE/ASM) with a single set of X-ray colors defined using data available only in pre-determined energy bands. We test a selection of X-ray colors with a more sensitive instrument to determine the reliability of this method. We use data from the MAXI/Gas Slit Camera, which allows users to specify energy-bands. We test X-ray colors that have been previously defined in the literature as well as ones that we define specifically in this paper. A representative set of systems are used to construct Color-Color-Intensity diagrams in each set of colors to determine which are best for separating different classes. For studying individual sources certain bands are more effective than others. For a specified energy range, the separation of soft states in black hole binaries was possible only where both soft and hard colors included information from the lowest energy band. We confirm that Color-Color-Intensity diagrams can distinguish between systems containing black holes or neutron stars in all X-ray colors tested; this suggests an universality in the accretion processes governing these different classes. We suggest possible physical processes driving different classes of X-ray binaries to different locations in Color-Color-Intensity diagrams.

N Islam↗
NASA NTRS2011

Development of a Novel Wireless Electric Power Transfer System for Space Applications

This paper will introduce a new implementation for wireless electric power transfer systems: space applications. Due to the risks that constitute the use of electrical connector for some space missions/applications, a simple wireless power system design approach will be evaluated as an alternative for the use of electrical connectors. This approach takes into consideration the overall system performance by designing the magnetic resonance elements and by verifying the overall system electrical behavior. System characterization is accomplished by executing circuit and analytical simulations using Matlab(TradeMark) and LTSpiceIV(TradeMark) software packages. The design methodology was validated by two different experiments: frequency consideration (design of three magnetic elements) and a small scale proof-ofconcept prototype. Experiment results shows successful wireless power transfer for all the cases studied. The proof-of-concept prototype provided approx.4 W of wireless power to the load (light bulb) at a separation of 3 cm from the source. In addition. a resonant circuit was designed and installed to the battery terminals of a handheld radio without batteries, making it tum on at a separation of approx.5 cm or less from the source. It was also demonstrated by prototype experimentation that multiple loads can be powered wirelessly at the same time with a single electric power source.

VazquezRamos, Gabriel↗
NASA NTRS2004

Jet Noise Source Localization Using Linear Phased Array

A study was conducted to further clarify the interpretation and application of linear phased array microphone results, for localizing aeroacoustics sources in aircraft exhaust jet. Two model engine nozzles were tested at varying power cycles with the array setup parallel to the jet axis. The array position was varied as well to determine best location for the array. The results showed that it is possible to resolve jet noise sources with bypass and other components separation. The results also showed that a focused near field image provides more realistic noise source localization at low to mid frequencies.

Agboola, Ferni A.↗
NASA NTRS2010

Estimation of Signal Coherence Threshold and Concealed Spectral Lines Applied to Detection of Turbofan Engine Combustion Noise

Combustion noise from turbofan engines has become important, as the noise from sources like the fan and jet are reduced. An aligned and un-aligned coherence technique has been developed to determine a threshold level for the coherence and thereby help to separate the coherent combustion noise source from other noise sources measured with far-field microphones. This method is compared with a statistics based coherence threshold estimation method. In addition, the un-aligned coherence procedure at the same time also reveals periodicities, spectral lines, and undamped sinusoids hidden by broadband turbofan engine noise. In calculating the coherence threshold using a statistical method, one may use either the number of independent records or a larger number corresponding to the number of overlapped records used to create the average. Using data from a turbofan engine and a simulation this paper shows that applying the Fisher z-transform to the un-aligned coherence can aid in making the proper selection of samples and produce a reasonable statistics based coherence threshold. Examples are presented showing that the underlying tonal and coherent broad band structure which is buried under random broadband noise and jet noise can be determined. The method also shows the possible presence of indirect combustion noise. Copyright 2011 Acoustical Society of America. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the Acoustical Society of America.

Miles, Jeffrey Hilton↗
NASA NTRS2008

Time Delay Analysis of Turbofan Engine Direct and Indirect Combustion Noise Sources

The core noise components of a dual spool turbofan engine were separated by the use of a coherence function. A source location technique based on adjusting the time delay between the combustor pressure sensor signal and the far-field microphone signal to maximize the coherence and remove as much variation of the phase angle with frequency as possible was used. The discovery was made that for the 130o microphone a 90.027 ms time shift worked best for the frequency band from 0 to 200 Hz while a 86.975 ms time shift worked best for the frequency band from 200 to 400 Hz. Hence, the 0 to 200 Hz band signal took more time than the 200 to 400 Hz band signal to travel the same distance. This suggests the 0 to 200 Hz coherent cross spectral density band is partly due to indirect combustion noise attributed to entropy fluctuations, which travel at the flow velocity, interacting with the turbine. The signal in the 200 to 400 Hz frequency band is attributed mostly to direct combustion noise. Results are presented herein for engine power settings of 48, 54, and 60 percent of the maximum power setting

Miles, Jeffrey Hilton↗
NASA NTRS1989

Is plagioclase removal responsible for the negative Eu anomaly in the source regions of mare basalts?

The nearly ubiquitous presence of a negative Eu anomaly in the mare basalts has been suggested to indicate prior separation and flotation of plagioclase from the basalt source region during its crystallization from a lunar magma ocean (LMO). Are there any mare basalts derived from a mantle source which did not experience prior plagioclase separation? Crystal chemical rationale for REE substitution in pyroxene suggests that the combination of REE size and charge, M2 site characteristics of pyroxene, fO2, magma chemistry, and temperature may account for the negative Eu anomaly in the source region of some types of primitive, low TiO2 mare basalts. This origin for the negative Eu anomaly does not preclude the possibility of the LMO as many mare basalts still require prior plagioclase crystallization and separation and/or hybridization involving a KREEP component.

Shearer, C. K.↗
DOE OSTI2026

Membranes for Lithium Recovery From Conventional and Unconventional Sources

Lithium has been deemed a critical mineral of national importance that finds uses in a wide range of applications, and its demand has been rising significantly in recent years. The urgency of meeting this demand requires lithium extraction from various aqueous sources such as continental brines, geothermal brines, seawater, produced water, and battery waste. While direct lithium extraction (DLE) technologies such as adsorption, ion exchange, and solvent extraction have emerged as possible solutions, membrane technologies are also being investigated for various sources and at different stages of the recovery process. Here, we analyze the application of membranes for pretreatment of lithium source waters, bring management, lithium/magnesium separation, lithium/sodium separation, and lithium hydroxide conversion, and evaluate performance metrics for critical lithium separations from the literature. We explore the potential of membranes at every stage of the recovery process and describe their current status and future prospects. We describe hypothetical process trains with integrated membrane technologies for each source type and address their feasibility and challenges. The potential energy and water impacts of membrane-integrated and conventional DLE processes are also critically considered alongside performance and selectivity metrics, and this is illustrated using examples and calculated from published technical reports. This paper thus provides a comprehensive overview of the application of membranes along every stage of the lithium recovery process, emphasizing the versatility and potential of membrane technologies for critical mineral recovery.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Using finite volume methods for aeroacoustics

This paper is concerned with the application of unsteady finite volume methods to the numerical calculation of aeroacoustic problems. Some discussion is made of how the acoustic analogy of Lighthill has led to a separation between the calculation of acoustic source, or flow, and the subsequent sound field. It is pointed out that for transonic flow this separation is not necessarily useful. The example problem of an impulsively started cylinder is given for speed of Mach .1 and .5. In the Mach .5 case a strong shock is followed as it develops. A further example of the cylinder stopping impulsively is given as well. MacCormack's explicit predictor-corrector method is used for all the examples.

Brentner, Kenneth S.↗
NASA NTRS1992

Heat sources for tertiary metamorphism and anatexis in the Annapurna-Manaslu region, central Nepal

The metamorphic evolution of the rocks near the Main Central Thrust in the Annapurna-Manaslu region of central Nepal is examined. In this region, all three types of metamorphic features can be observed: regional metamorphism, anatectic granitoids, and inverted metamorphic isograds. In this work, each phase of metamorphism is treated separately to estimate the heat sources required for each process. This approach makes it possible to identify the important parameters for each process, to draw preliminary conclusions about the heat sources required for each of these phases, and to determine which parameters need to be measured more precisely in order to constrain these heat sources.

England, Philip↗
DOE OSTI2025

United States Nuclear Data Program Annual Report for Fiscal Year 2024

The US Nuclear Data Program (USNDP) Annual Report for Fiscal Year 2024 (FY24) summarizes the work of USNDP for the period of October 1, 2023 through September 30, 2024, with respect to the Work Plan for FY24 that was prepared in 2022. The Work Plan and Final Report for USNDP are prepared for the DOE Office of Science, Office of Nuclear Physics. The support for the nuclear data activity from sources outside the nuclear data program is described in the staffing table and in Appendix A. This leverage amounts to about 14.8 FTE scientific, to be compared with 13.9 FTEs at USNDP units funded by the DOE Office of Science, Office of Nuclear Physics. Since it is often difficult to separate accomplishments funded by various sources, some of the work reported in the present report was accomplished with nuclear data program support leveraged by other funding.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

United States Nuclear Data Program Annual Report for Fiscal Year 2025

The US Nuclear Data Program (USNDP) Annual Report for Fiscal Year 2025 summarizes the work of USNDP for the period of October 1, 2024 through September 30, 2025, with respect to the Work Plan for FY 2025 that was prepared in 2024. The Work Plan and Final Report for USNDP are prepared for the DOE Office of Science, Office of Nuclear Physics. The support for the nuclear data activity from sources outside the US Nuclear Data Program is summarized in the staffing table and Appendix A. This leverage amounts to about 22.8 FTE scientific, to be compared with 21.9 FTEs at USNDP units funded by the DOE Office of Science, Office of Nuclear Physics. Since it is often difficult to separate accomplishments funded by various sources, some of the work reported in the present report was accomplished with nuclear data program support leveraged by other funding. FY 2025 was the 25th year in which the USNDP has operated under a Work Plan developed by the program participants. The program continued to carry out important work in support of the DOE mission. The work balances the ongoing collecting, analyzing, and archiving of nuclear physics information critical to basic nuclear research and to the development and improvement of nuclear technologies with the electronic distribution of this information to users in a timely and easily accessible manner. The present section of the report consists of activity summaries for the major components of the USNDP. This is followed by an updated staff level assignment table that reflects the final distribution of effort among the tasks carried out during FY 2025. Then, we continue with the detailed status of work performed during FY 2025.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1976

Lip noise generated by flow separation from nozzle surfaces

Flow separation from nozzle surfaces can be a source of significant noise in addition to the jet noise. When no flow separation region exists only jet noise is observed at every angle, for velocities down to 120 m/sec, with both low and high levels of initial turbulence. Intense nearly periodic turbulence and noise is caused by flow separation from the thin core nozzle lip of a coaxial nozzle. This can be described by a combination of aeolian tone and trailing edge noise theory. Noise caused by flow separation from the surfaces of other nozzle geometries has somewhat different characteristics.

Olsen, W.↗
NASA NTRS1984

The Base Engine for Solar Stirling Power

A new concept in Stirling engine technology is embodied in the base engine now being developed at Stirling Thermal Motors, Inc. This is a versatile energy conversion unit suitable for many different applications and heat sources. The base engine, rated 40 kW at 2800 RPM, is a four-cylinder, double-acting variable displacement Stirling engine with pressurized crankcase and rotating shaft seal. Remote-heating technology is incorporated with a stacked-heat-exchanger configuration and a liquid metal heat pipe connected to a distinctly separate combustor or other heat source. High efficiency over a wide range of operating conditions, long life, low manufacturing cost and low material cost are specifically emphasized. The base engine, its design philosophy and approach, its projected performance, and some of its more attractive applications are described.

Meijer, R. J.↗
NASA NTRS1974

Magnetospheric sources

Motions of the plasma and the energetic particles in the magnetosphere modify the earth's internal field. It is not possible to separate the fields produced by the magnetospheric sources from the field of internal terrestrial origin on the basis of magnetic field observations made on the ground. Such a separation requires an analysis in which data obtained with the aid of satellites are taken into account in addition to the values measured on the ground. Data of the magnetic field obtained by the satellite Ogo 5 are considered.

Sugiura, M.↗
NASA NTRS1989

The spatial, spectral, and temporal character of the hard X-ray flare of 1982 February 3

This paper presents spatially resolved, hard and soft X-ray, 17 GHz microwave and H-alpha observations of an X1.1 flare which occurred on February 3, 1982. The bulk of the 25-50 keV hard X-ray emission during impulsive peaks is produced by two sources of differing brightness which are separated by about 50 arcsec. Soft X-ray images reveal a single component that resides between the two hard sources. On the decay of the event, X-ray spectra provide direct evidence for a hot component that dominates the less than 50 keV flux. Hard X-ray images obtained at these times show a single source that is nearly coincident with the soft X-ray source. Interferometric microwave observations obtained during impulsive peaks support the idea that microwave emission is produced in the vicinity of high magnetic fields near the sunspot. The influence of an asymmetric loop or system of asymmetric loops is essential to interpreting the observations.

Nitta, Nariaki↗